MainWindow.cpp

Go to the documentation of this file.

/******************************************************************************************************
 * (C) 2014 markummitchell@github.com. This file is part of Engauge Digitizer, which is released      *
 * under GNU General Public License version 2 (GPLv2) or (at your option) any later version. See file *
 * LICENSE or go to gnu.org/licenses for details. Distribution requires prior written permission.     *
 ******************************************************************************************************/
 
#include "BackgroundImage.h"
#include "BackgroundStateContext.h"
#include "ChecklistGuide.h"
#include "ChecklistGuideWizard.h"
#include "CmdAddPointsGraph.h"
#include "CmdCopy.h"
#include "CmdCut.h"
#include "CmdDelete.h"
#include "CmdMediator.h"
#include "CmdSelectCoordSystem.h"
#include "CmdStackShadow.h"
#include "ColorFilter.h"
#include "CreateFacade.h"
#include "Curve.h"
#include "DataKey.h"
#include "DigitizeStateContext.h"
#include "DlgAbout.h"
#include "DlgErrorReportLocal.h"
#include "DlgImportAdvanced.h"
#include "DlgRequiresTransform.h"
#include "DlgSettingsAxesChecker.h"
#include "DlgSettingsColorFilter.h"
#include "DlgSettingsCoords.h"
#include "DlgSettingsCurveList.h"
#include "DlgSettingsCurveProperties.h"
#include "DlgSettingsDigitizeCurve.h"
#include "DlgSettingsExportFormat.h"
#include "DlgSettingsGeneral.h"
#include "DlgSettingsGridDisplay.h"
#include "DlgSettingsGridRemoval.h"
#include "DlgSettingsMainWindow.h"
#include "DlgSettingsPointMatch.h"
#include "DlgSettingsSegments.h"
#include "DocumentScrub.h"
#include "DocumentSerialize.h"
#include "EngaugeAssert.h"
#include "EnumsToQt.h"
#include "ExportImageForRegression.h"
#include "ExportToFile.h"
#include "FileCmdScript.h"
#include "FittingCurve.h"
#include "FittingWindow.h"
#include "GeometryWindow.h"
#include "Ghosts.h"
#include "GraphicsItemsExtractor.h"
#include "GraphicsItemType.h"
#include "GraphicsScene.h"
#include "GraphicsView.h"
#include "GridLineFactory.h"
#include "GridLineLimiter.h"
#if !defined(OSX_DEBUG) && !defined(OSX_RELEASE)
#include "HelpWindow.h"
#endif
#include "ImportImageExtensions.h"
#ifdef ENGAUGE_JPEG2000
#include "Jpeg2000.h"
#endif // ENGAUGE_JPEG2000
#include "LoadFileInfo.h"
#include "LoadImageFromUrl.h"
#include "Logger.h"
#include "MainDirectoryPersist.h"
#include "MainTitleBarFormat.h"
#include "MainWindow.h"
#include "MimePointsImport.h"
#ifdef NETWORKING
#include "NetworkClient.h"
#endif
#include "NonPdf.h"
#ifdef ENGAUGE_PDF
#include "Pdf.h"
#endif // ENGAUGE_PDF
#include "PdfResolution.h"
#include <QAction>
#include <QApplication>
#include <QClipboard>
#include <QCloseEvent>
#include <QComboBox>
#include <QDebug>
#include <QDesktopServices>
#include <QDockWidget>
#include <QDomDocument>
#include <QFileDialog>
#include <QFileInfo>
#include <QImageReader>
#include <QKeyEvent>
#include <QKeySequence>
#include <qmath.h>
#include <QMessageBox>
#include <QMouseEvent>
#include <QPrintDialog>
#include <QPrinter>
#include <QProcess>
#include <QPushButton>
#include <QSettings>
#include <QSignalMapper>
#include <QTextStream>
#if !defined(OSX_DEBUG) && !defined(OSX_RELEASE)
#include <QtHelp>
#endif
#include <QTimer>
#include <QToolBar>
#include <QToolButton>
#include "QtToString.h"
#include <QVBoxLayout>
#include <QWhatsThis>
#include <QXmlStreamReader>
#include <QXmlStreamWriter>
#include "ScaleBarAxisPointsUnite.h"
#include "Settings.h"
#include "StatusBar.h"
#include "TransformationStateContext.h"
#include "TutorialDlg.h"
#include "Version.h"
#include "ViewPointStyle.h"
#include "ViewSegmentFilter.h"
#include "ZoomFactor.h"
#include "ZoomFactorInitial.h"
#include "ZoomTransition.h"
 
const QString EMPTY_FILENAME ("");
static const char *ENGAUGE_FILENAME_DESCRIPTION = "Engauge Document";
const QString ENGAUGE_FILENAME_EXTENSION ("dig");
const int REGRESSION_INTERVAL = 400; // Milliseconds
const unsigned int MAX_RECENT_FILE_LIST_SIZE = 8;
 
MainWindow::MainWindow(const QString &errorReportFile,
                       const QString &fileCmdScriptFile,
                       bool isDropRegression,
                       bool isRegressionTest,
                       bool isGnuplot,
                       bool isReset,
                       bool isExportOnly,
                       bool isExtractImageOnly,
                       const QString &extractImageOnlyExtension,
                       const QStringList &loadStartupFiles,
                       const QStringList &commandLineWithoutLoadStartupFiles,
                       QWidget *parent) :
  QMainWindow(parent),
  m_originalFileWasImported (false),
  m_isDocumentExported (false),
  m_engaugeFile (EMPTY_FILENAME),
  m_currentFile (EMPTY_FILENAME),
  m_layout (nullptr),
  m_scene (nullptr),
  m_view (nullptr),
  m_loadImageFromUrl (nullptr),
  m_cmdMediator (nullptr),
  m_digitizeStateContext (nullptr),
  m_transformationStateContext (nullptr),
  m_backgroundStateContext (nullptr),
  m_networkClient (nullptr),
  m_isGnuplot (isGnuplot),
  m_commandLineWithoutLoadStartupFiles (commandLineWithoutLoadStartupFiles),
  m_ghosts (nullptr),
  m_timerRegressionErrorReport(nullptr),
  m_fileCmdScript (nullptr),
  m_isErrorReportRegressionTest (isRegressionTest),
  m_timerRegressionFileCmdScript(nullptr),
  m_fittingCurve (nullptr),
  m_isExportOnly (isExportOnly),
  m_isExtractImageOnly (isExtractImageOnly),
  m_extractImageOnlyExtension (extractImageOnlyExtension)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::MainWindow"
                              << " curDir=" << QDir::currentPath().toLatin1().data();
 
#if defined(OSX_DEBUG) || defined(OSX_RELEASE)
  qApp->setApplicationName ("Engauge Digitizer");
  qApp->setOrganizationDomain ("Mark Mitchell");
#endif
 
  LoggerUpload::bindToMainWindow(this);
 
  m_startupDirectory = QDir::currentPath();
 
  setCurrentFile ("");
 
  CreateFacade createFacade;
  createFacade.create (*this);
 
  updateControls ();
 
  settingsRead (isReset); // This changes the current directory when not regression testing
  setCurrentFile ("");
  setUnifiedTitleAndToolBarOnMac(true);
 
  installEventFilter(this);
 
  // Start regression scripting if appropriate. Regression scripts assume current directory is the original
  // current directory, so we temporarily reset the current directory
  QString originalPath = QDir::currentPath();
  QDir::setCurrent (m_startupDirectory);
  if (isExportOnly) {
    m_loadStartupFiles = loadStartupFiles;
    m_regressionFile = exportRegressionFilenameFromInputFilename (loadStartupFiles.first ()); // For regression test
    slotLoadStartupFiles ();
    slotFileExport (); // Export one file. QProcess::startDetached will be called for each remaining file
    exit (0);
  } else if (isExtractImageOnly) {
    m_loadStartupFiles = loadStartupFiles;
    m_regressionFile = exportRegressionFilenameFromInputFilename (loadStartupFiles.first ()); // For regression test
    slotLoadStartupFiles ();
    handlerFileExtractImage ();  // Extract one file. QProcess::startDetached will be called for each remaining file
    exit (0);
  } else if (!errorReportFile.isEmpty()) {
    loadErrorReportFile(errorReportFile);
    if (m_isErrorReportRegressionTest) {
      startRegressionTestErrorReport(errorReportFile);
    }
  } else if (!fileCmdScriptFile.isEmpty()) {
    m_fileCmdScript = new FileCmdScript (fileCmdScriptFile);
    startRegressionTestFileCmdScript();
  } else if (isDropRegression) {
    m_fileCmdScript = new FileCmdScript (""); // Hack to keep dialogs from popping up
    startRegressionDropTest (loadStartupFiles);
  } else {
 
    // Save file names for later, after gui becomes available. The file names are dropped if error report file is specified
    // since only one of the two modes is available at any time, for simplicity
    m_loadStartupFiles = loadStartupFiles;
  }
  QDir::setCurrent (originalPath);
}
 
MainWindow::~MainWindow()
{
#if !defined(OSX_DEBUG) && !defined(OSX_RELEASE)
  delete m_helpWindow;
#endif
  delete m_tutorialDlg;
  delete m_cmdMediator;
  delete m_cmdStackShadow;
  delete m_digitizeStateContext;
  delete m_transformationStateContext;
  delete m_backgroundStateContext;
  delete m_dlgSettingsAxesChecker;
  delete m_dlgSettingsColorFilter;
  delete m_dlgSettingsCoords;
  delete m_dlgSettingsCurveList;
  delete m_dlgSettingsCurveProperties;
  delete m_dlgSettingsDigitizeCurve;
  delete m_dlgSettingsExportFormat;
  delete m_dlgSettingsGeneral;
  delete m_dlgSettingsGridDisplay;
  delete m_dlgSettingsGridRemoval;
  delete m_dlgSettingsMainWindow;
  delete m_dlgSettingsPointMatch;
  delete m_dlgSettingsSegments;
  delete m_fileCmdScript;
  m_gridLines.clear ();
}
 
void MainWindow::addDockWindow (QDockWidget *dockWidget,
                                QSettings &settings,
                                const QString &settingsTokenArea,
                                const QString &settingsTokenGeometry,
                                Qt::DockWidgetArea dockWidgetArea)
{
  // Checklist guide is docked or undocked. Default is docked so it does not get overlooked by the user (which
  // can happen if it opens elsewhere). The user may not know it can be undocked, but at least can resize or
  // hide it if he/she needs more room for the main window.
  const bool DOCKED_EQUALS_NOT_FLOATING = false;
  Qt::DockWidgetArea area = static_cast<Qt::DockWidgetArea> (settings.value (settingsTokenArea,
                                                                             Qt::NoDockWidgetArea).toInt());
 
  if (area == Qt::NoDockWidgetArea) {
 
    addDockWidget (dockWidgetArea,
                   dockWidget); // Add on the right to prevent error message, then immediately make undocked
    dockWidget->setFloating(DOCKED_EQUALS_NOT_FLOATING);
    if (settings.contains (settingsTokenGeometry)) {
      dockWidget->restoreGeometry (settings.value (settingsTokenGeometry).toByteArray());
    }
 
  } else {
 
    addDockWidget (area,
                   dockWidget);
 
  }
}
 
void MainWindow::applyZoomFactorAfterLoad()
{
  ZoomFactor zoomFactor;
  ZoomFactorInitial zoomFactorInitial = m_modelMainWindow.zoomFactorInitial();
 
  if (m_zoomMapFromInitial.contains (zoomFactorInitial)) {
    zoomFactor = m_zoomMapFromInitial [zoomFactorInitial];
  } else if (zoomFactorInitial == ZOOM_INITIAL_PREVIOUS) {
    zoomFactor = currentZoomFactor ();
  } else {
    ENGAUGE_ASSERT (false);
    zoomFactor = currentZoomFactor();
  }
 
  slotViewZoom (zoomFactor);
}
 
void MainWindow::closeEvent(QCloseEvent *event)
{
  if (maybeSave()) {
    settingsWrite ();
    event->accept ();
  } else {
    event->ignore ();
  }
}
 
void MainWindow::cmdFileClose()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::cmdFileClose";
 
  setWindowModified (false); // Prevent popup query asking if changes should be saved
  slotFileClose();
}
 
void MainWindow::cmdFileExport(const QString &fileName)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::cmdFileExport";
 
  ExportToFile exportStrategy;
  fileExport(fileName,
             exportStrategy);
}
 
void MainWindow::cmdFileImport(const QString &fileName)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::cmdFileImport";
 
  m_regressionFile = exportRegressionFilenameFromInputFilename (fileName);
  fileImport (fileName,
              IMPORT_TYPE_SIMPLE);
}
 
void MainWindow::cmdFileOpen(const QString &fileName)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::cmdFileOpen";
 
  m_regressionFile = exportRegressionFilenameFromInputFilename (fileName);
  loadDocumentFile(fileName);
}
 
CmdMediator *MainWindow::cmdMediator ()
{
  // We do not check m_cmdMediator with ENGAUGE_CHECK_PTR since calling code is expected to deal with null pointer at startup
  return m_cmdMediator;
}
 
ZoomFactor MainWindow::currentZoomFactor () const
{
  // Find the zoom control that is checked
  for (int z = 0; z < NUMBER_ZOOM_FACTORS; z++) {
    ZoomFactor zoomFactor = static_cast<ZoomFactor> (z);
    if (m_zoomMapToAction [zoomFactor]->isChecked ()) {
      // This zoom control is checked
      return zoomFactor;
    }
  }
 
  ENGAUGE_ASSERT (false);
  return ZOOM_1_TO_1;
}
 
bool MainWindow::eventFilter(QObject *target, QEvent *event)
{
  if (event->type () == QEvent::KeyPress) {
 
    QKeyEvent *eventKeyPress = static_cast<QKeyEvent *> (event);
 
    // Special shortcuts. All of these are probably only useful for debugging and/or regression testing
    if ((eventKeyPress->key() == Qt::Key_E) &&
        ((eventKeyPress->modifiers() & Qt::ShiftModifier) != 0) &&
        ((eventKeyPress->modifiers() & Qt::ControlModifier) != 0)) {
 
      saveErrorReportFileAndExit ("Shift+Control+E",
                                  __FILE__,
                                  __LINE__,
                                  "userTriggered");
 
    }
  }
 
  return QObject::eventFilter (target, event);
}
 
#if !defined(OSX_DEBUG) && !defined(OSX_RELEASE)
void MainWindow::exportAllCoordinateSystemsAfterRegressionTests()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::exportAllCoordinateSystemsAfterRegressionTests curDir=" << QDir::currentPath().toLatin1().data();
 
  // Output the regression test results. One file is output for every coordinate system
  for (CoordSystemIndex index = 0; index < m_cmdMediator->document().coordSystemCount(); index++) {
 
    updateCoordSystem (index); // Switch to the specified coordinate system
 
    QString regressionFile = QString ("%1_%2")
                             .arg (m_regressionFile)
                             .arg (index + 1); // Append the coordinate system index
 
    // Normally we just export to a file, but when regression testing the export will fail since coordinates are not defined. To
    // get an export file when regression testing, we just output the image size
    if (m_isErrorReportRegressionTest && !m_transformation.transformIsDefined()) {
 
      ExportImageForRegression exportStrategy (m_cmdMediator->pixmap ());
      exportStrategy.fileExport (regressionFile);
 
    } else {
 
      ExportToFile exportStrategy;
 
      fileExport (regressionFile,
                  exportStrategy);
    }
  }
}
#endif
 
QString MainWindow::exportRegressionFilenameFromInputFilename (const QString &fileName) const
{
  // Include file extensions used in loading, importing or drag and drop. Note html is before htm
  // so the "l" gets replaced
  QStringList befores;
  befores << ".dig" << ".gif" << ".html" << ".htm" << ".jp2" << ".jpg" << ".pbm"
          << ".pdf" << ".pgm" << ".png" << ".ppm" << ".xbm" << ".xpm" << ".xml";
 
  QString outFileName = fileName;
 
  QStringList::iterator itr;
  for (itr = befores.begin(); itr != befores.end(); itr++) {
    QString suffix = *itr;
 
    outFileName = outFileName.replace (suffix, ".csv_actual", Qt::CaseInsensitive);
  }
 
  return outFileName;
}
 
void MainWindow::fileExport(const QString &fileName,
                            ExportToFile exportStrategy)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::fileExport"
                              << " curDir=" << QDir::currentPath().toLatin1().data()
                              << " fileName=" << fileName.toLatin1().data();
 
  QFile file (fileName);
  if (file.open(QIODevice::WriteOnly)) {
 
    QTextStream str (&file);
 
    DocumentModelExportFormat modelExportFormat = modelExportOverride (m_cmdMediator->document().modelExport(),
                                                                       exportStrategy,
                                                                       fileName);
    exportStrategy.exportToFile (modelExportFormat,
                                 m_cmdMediator->document(),
                                 m_modelMainWindow,
                                 transformation (),
                                 str);
 
    m_isDocumentExported = true; // Remember that export was performed
 
    updateChecklistGuide ();
    m_statusBar->showTemporaryMessage("File saved");
 
  } else {
 
    LOG4CPP_ERROR_S ((*mainCat)) << "MainWindow::fileExport"
                                 << " file=" << fileName.toLatin1().data()
                                 << " curDir=" << QDir::currentPath().toLatin1().data();
    QMessageBox::critical (nullptr,
                           engaugeWindowTitle(),
                           tr ("Unable to export to file") + " " + fileName);
  }
}
 
void MainWindow::fileExtractImage (const QString &fileName)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::fileExtractImage"
                              << " curDir=" << QDir::currentPath().toLatin1().data()
                              << " fileName=" << fileName.toLatin1().data();
 
  QFile file (fileName);
  if (file.open(QIODevice::WriteOnly)) {
 
    QPixmap pixmap = m_cmdMediator->pixmap();
    pixmap.save (&file);
 
    // Generate a checksum file if performing a regression test
    if (m_isErrorReportRegressionTest) {
      QString csvFile = QString ("%1_1")
          .arg (exportRegressionFilenameFromInputFilename (m_regressionFile));
 
      // Generate csv file with only checksum. Since QProcess cannot handle pipes, we let shell execute it
      QProcess process;
      process.start ("bash -c \"cksum " + fileName + " | awk '{print $1}' > " + csvFile + "\"");
      process.waitForFinished (-1);
    }
 
  } else {
 
    LOG4CPP_ERROR_S ((*mainCat)) << "MainWindow::fileExtractImage"
                                 << " file=" << fileName.toLatin1().data()
                                 << " curDir=" << QDir::currentPath().toLatin1().data();
    QMessageBox::critical (nullptr,
                           engaugeWindowTitle(),
                           tr ("Unable to extract image to file") + " " + fileName);
  }
}
 
void MainWindow::fileImport (const QString &fileName,
                             ImportType importType)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::fileImport"
                              << " fileName=" << fileName.toLatin1 ().data ()
                              << " curDir=" << QDir::currentPath().toLatin1().data()
                              << " importType=" << importType;
 
  QString originalFileOld = m_originalFile;
  bool originalFileWasImported = m_originalFileWasImported;
 
  m_originalFile = fileName; // Make this available for logging in case an error occurs during the load
  m_originalFileWasImported = true;
 
  if (importType == IMPORT_TYPE_ADVANCED) {
 
    // Remove any existing points, axes checker(s) and such from the previous Document so they do not appear in setupAfterLoadNewDocument
    // when previewing for IMAGE_TYPE_ADVANCED
    slotFileClose();
 
    // Restore the background just closed by slotFileClose. This is required so when the image is loaded for preview, it will appear
    m_backgroundStateContext->setBackgroundImage(BACKGROUND_IMAGE_ORIGINAL);
  }
 
  QImage image;
  bool loaded = false;
 
#ifdef ENGAUGE_JPEG2000
  Jpeg2000 jpeg2000;
  loaded = jpeg2000.load (fileName,
                          image);
#endif // ENGAUGE_JPEG2000
 
#ifdef ENGAUGE_PDF
  if (!loaded) {
    
    Pdf pdf;
    PdfReturn pdfReturn = pdf.load (fileName,
                                    image,
                                    m_modelMainWindow.pdfResolution(),
                                    m_modelMainWindow.importCropping(),
                                    m_isErrorReportRegressionTest);
    if (pdfReturn == PDF_RETURN_CANCELED) {
 
      // User canceled so exit immediately
      return;
 
    }
 
    loaded = (pdfReturn == PDF_RETURN_SUCCESS);
  }
#endif // ENGAUGE_PDF
 
  if (!loaded) {
    NonPdf nonPdf;
    NonPdfReturn nonPdfReturn = nonPdf.load (fileName,
                                             image,
                                             m_modelMainWindow.importCropping(),
                                             m_isErrorReportRegressionTest);
    if (nonPdfReturn == NON_PDF_RETURN_CANCELED) {
 
      // User canceled so exit immediately
      return;
 
    }
 
    loaded = (nonPdfReturn == NON_PDF_RETURN_SUCCESS);
  }
 
  if (!loaded) {
    QString msg = QString("%1 %2 %3 %4.")
                  .arg (tr ("Cannot read file"))
                  .arg (fileName)
                  .arg (tr ("from directory"))
                  .arg (QDir::currentPath());
#ifdef WIN32
    if (fileName.contains ("???")) {
 
      // At this point the file name is filled with question marks in Windows if it had letter from
      // more than one alphabet (e.g. latin '.dig' suffix and cyrillic basename)
      // in which case we cannot recover the original file without user intervention
      msg += QObject::tr ("The file appears to have characters from multiple language "
                          "alphabets, which does not work in the Windows command line");
    }
#endif
    QMessageBox::warning (this,
                          engaugeWindowTitle(),
                          msg);
 
    // Reset
    m_originalFile = originalFileOld;
    m_originalFileWasImported = originalFileWasImported;
 
  } else {
 
    loaded = loadImage (fileName,
                        image,
                        importType);
 
    if (loaded) {
 
      // Success
      if ((m_cmdMediator->document().coordSystemCount() > 1) &&
          ! m_actionViewCoordSystem->isChecked ()) {
 
        // User is working with multiple coordinate systems so make the coordinate system toolbar visible
        m_actionViewCoordSystem->trigger ();
      }
 
    } else {
 
      // Failed
      if (importType == IMPORT_TYPE_ADVANCED) {
 
        // User cancelled after another file was imported so it could be previewed. In anticipation of the loading-for-preview,
        // we closed the current Document at the top of this method so we cannot reload. So, the only option is to close again
        // so the half-imported current Document is removed
        slotFileClose();
 
      } else {
 
        // Reset
        m_originalFile = originalFileOld;
        m_originalFileWasImported = originalFileWasImported;
      }
    }
  }
}
 
void MainWindow::fileImportWithPrompts (ImportType importType)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::fileImportWithPrompts"
                              << " importType=" << importType;
 
  // Skip maybeSave method for IMPORT_TYPE_REPLACE_IMAGE since open file dialog is enough to allow user to cancel the operation, and
  // since no information is lost in that case
  bool okToContinue = true;
  if (importType != IMPORT_TYPE_IMAGE_REPLACE) {
    okToContinue = maybeSave ();
  }
 
  if (okToContinue) {
 
    QString filter;
    QTextStream str (&filter);
 
    ImportImageExtensions importImageExtensions;
    QStringList supportedImageFormatStrings = importImageExtensions.fileExtensionsWithAsterisks ();
 
    str << "Image Files (" << supportedImageFormatStrings.join (" ") << ")";
 
    // Allow selection of files with strange suffixes in case the file extension was changed. Since
    // the default is the first filter, we add this afterwards (it is the off-nominal case)
    str << ";; All Files (*.*)";
 
    MainDirectoryPersist directoryPersist;
    QString fileName = QFileDialog::getOpenFileName (this,
                                                     tr("Import Image"),
                                                     directoryPersist.getDirectoryImportOpen ().path (),
                                                     filter);
    if (!fileName.isEmpty ()) {
 
      directoryPersist.setDirectoryImportOpenFromFilename (fileName);
 
      // We import the file BEFORE asking the number of coordinate systems, so user can see how many there are
      fileImport (fileName,
                  importType);
    }
  }
}
 
QString MainWindow::fileNameForExportOnly () const
{
  ExportToFile exportStrategy;      
 
  QString fileName;
  if (m_isErrorReportRegressionTest) {
 
    // Regression test has a specific file extension
    fileName = QString ("%1_1")
      .arg (exportRegressionFilenameFromInputFilename (m_regressionFile));
 
  } else {
 
    // User requested export-only mode so just change file extension
    QString dir = QFileInfo (m_currentFileWithPathAndFileExtension).absolutePath();
    fileName = QString ("%1/%2.%3")
      .arg (dir)
      .arg (m_currentFile)
      .arg (exportStrategy.fileExtensionCsv ());
  }
 
  return fileName;
}
 
QString MainWindow::fileNameForExtractImageOnly () const
{
  // User requested export-only mode so just change file extension
  QString dir = QFileInfo (m_currentFileWithPathAndFileExtension).absolutePath();
  QString fileName = QString ("%1/%2.%3")
    .arg (dir)
    .arg (m_currentFile)
    .arg (m_extractImageOnlyExtension);
 
  return fileName;
}
 
void MainWindow::filePaste (ImportType importType)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::filePaste"
                              << " importType=" << importType;
 
  QString originalFileOld = m_originalFile;
  bool originalFileWasImported = m_originalFileWasImported;
 
  QString fileName ("clipboard");
  m_originalFile = fileName; // Make this available for logging in case an error occurs during the load
  m_originalFileWasImported = true;
 
  if (importType == IMPORT_TYPE_ADVANCED) {
 
    // Remove any existing points, axes checker(s) and such from the previous Document so they do not appear in setupAfterLoadNewDocument
    // when previewing for IMAGE_TYPE_ADVANCED
    slotFileClose();
 
    // Restore the background just closed by slotFileClose. This is required so when the image is loaded for preview, it will appear
    m_backgroundStateContext->setBackgroundImage(BACKGROUND_IMAGE_ORIGINAL);
  }
 
  // An image was in the clipboard when this method was called but it may have disappeared
  QImage image = QApplication::clipboard()->image();
 
  bool loaded = false;
  if (!loaded) {
    loaded = !image.isNull();
  }
 
  if (!loaded) {
    QMessageBox::warning (this,
                          engaugeWindowTitle(),
                          QString("%1 %2 %3 %4.")
                          .arg (tr ("Cannot read file"))
                          .arg (fileName)
                          .arg (tr ("from directory"))
                          .arg (QDir::currentPath ()));
 
    // Reset
    m_originalFile = originalFileOld;
    m_originalFileWasImported = originalFileWasImported;
 
  } else {
 
    loaded = loadImage (fileName,
                        image,
                        importType);
 
    if (!loaded) {
 
      // Failed
      if (importType == IMPORT_TYPE_ADVANCED) {
 
        // User cancelled after another file was imported so it could be previewed. In anticipation of the loading-for-preview,
        // we closed the current Document at the top of this method so we cannot reload. So, the only option is to close again
        // so the half-imported current Document is removed
        slotFileClose();
 
      } else {
 
        // Reset
        m_originalFile = originalFileOld;
        m_originalFileWasImported = originalFileWasImported;
      }
    }
  }
}
 
void MainWindow::ghostsCreate ()
{
  LOG4CPP_DEBUG_S ((*mainCat)) << "MainWindow::ghostsCreate";
 
  ENGAUGE_ASSERT (m_ghosts == nullptr);
  m_ghosts = new Ghosts (m_cmdMediator->document().coordSystemIndex());
 
  for (unsigned int index = 0; index < m_cmdMediator->document().coordSystemCount(); index++) {
 
    // Skip this coordinate system if it is the selected coordinate system since it will be displayed anyway, so no ghosts are required
    if (index != m_ghosts->coordSystemIndexToBeRestored ()) {
 
      updateCoordSystem (index);
 
      // Take a snapshot of the graphics items
      m_ghosts->captureGraphicsItems (*m_scene);
    }
  }
 
  // Restore the coordinate system that was originally selected, so its points/lines are visible
  updateCoordSystem (m_ghosts->coordSystemIndexToBeRestored ());
 
  // Make visible ghosts
  m_ghosts->createGhosts (*m_scene);
}
 
void MainWindow::ghostsDestroy ()
{
  LOG4CPP_DEBUG_S ((*mainCat)) << "MainWindow::ghostsDestroy";
 
  ENGAUGE_CHECK_PTR (m_ghosts);
 
  m_ghosts->destroyGhosts(*m_scene);
 
  delete m_ghosts;
  m_ghosts = nullptr;
}
 
void MainWindow::handlerFileExtractImage ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::handlerFileExtractImage";
 
  if (m_isExtractImageOnly) {
    QString fileName = fileNameForExtractImageOnly ();
 
    MainDirectoryPersist directoryPersist;
 
    directoryPersist.setDirectoryExportSaveFromFilename(fileName);
    fileExtractImage(fileName);
  }
}
 
QImage MainWindow::imageFiltered () const
{
  return m_backgroundStateContext->imageForCurveState();
}
 
bool MainWindow::isGnuplot() const
{
  return m_isGnuplot;
}
 
void MainWindow::loadCoordSystemListFromCmdMediator ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::loadCoordSystemListFromCmdMediator";
 
  m_cmbCoordSystem->clear();
 
  unsigned int numberCoordSystem = m_cmdMediator->document().coordSystemCount();
 
  for (unsigned int i = 0; i < numberCoordSystem; i++) {
    int index1Based = signed (i + 1);
    m_cmbCoordSystem->addItem (QString::number (index1Based),
                               QVariant (i));
  }
 
  // Always start with the first entry selected
  m_cmbCoordSystem->setCurrentIndex (0);
 
  // Disable the controls if there is only one entry. Hopefully the user will not even be distracted
  bool enable = (m_cmbCoordSystem->count() > 1);
  m_cmbCoordSystem->setEnabled (enable);
  m_btnShowAll->setEnabled (enable);
  m_btnPrintAll->setEnabled (enable);
}
 
void MainWindow::loadCurveListFromCmdMediator ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::loadCurveListFromCmdMediator";
 
  m_cmbCurve->clear ();
  QStringList curvesGraphsNames = m_cmdMediator->curvesGraphsNames ();
  QStringList::iterator itr;
  for (itr = curvesGraphsNames.begin (); itr != curvesGraphsNames.end (); itr++) {
 
    QString curvesGraphName = *itr;
    m_cmbCurve->addItem (curvesGraphName);
  }
 
  // Select the curve that is associated with the current coordinate system
  m_cmbCurve->setCurrentText (m_cmdMediator->selectedCurveName ());
}
 
void MainWindow::loadDocumentFile (const QString &fileName)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::loadDocumentFile fileName=" << fileName.toLatin1 ().data ();
 
  QApplication::setOverrideCursor(Qt::WaitCursor);
  CmdMediator *cmdMediator = new CmdMediator (*this,
                                              fileName);
 
  if (cmdMediator->successfulRead ()) {
 
    setCurrentPathFromFile (fileName);
    rebuildRecentFileListForCurrentFile(fileName);
    m_currentFile = fileName; // This enables the FileSaveAs menu option
 
    delete m_cmdMediator;
 
    m_cmdMediator = cmdMediator;
    setupAfterLoadNewDocument (fileName,
                               tr ("File opened"),
                               IMPORT_TYPE_SIMPLE);
 
    // Start select mode
    m_actionDigitizeSelect->setChecked (true); // We assume user wants to first select existing stuff
    slotDigitizeSelect(); // Trigger transition so cursor gets updated immediately
 
    m_engaugeFile = fileName;
    m_originalFile = fileName; // This is needed by updateAfterCommand below if an error report is generated
    m_originalFileWasImported = false;
 
    updateGridLines ();
    updateAfterCommand (); // Enable Save button now that m_engaugeFile is set
 
    QApplication::restoreOverrideCursor();
 
  } else {
 
    QApplication::restoreOverrideCursor();
 
    QMessageBox::warning (this,
                          engaugeWindowTitle(),
                          QString("%1 %2 %3 %4:\n%5.")
                          .arg (tr ("Cannot read file"))
                          .arg (fileName)
                          .arg (tr ("from directory"))
                          .arg (QDir::currentPath ())
                          .arg(cmdMediator->reasonForUnsuccessfulRead ()));
    delete cmdMediator;
 
  }
}
 
void MainWindow::loadErrorReportFile(const QString &errorReportFile)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::loadErrorReportFile"
                              << " file=" << errorReportFile.toLatin1().data();
 
  QFile file (errorReportFile);
  if (!file.exists()) {
    // Convert path from relative to absolute so file-not-found errors are easier to fix
    QFileInfo fileInfo (errorReportFile);
 
    QMessageBox::critical (this,
                           engaugeWindowTitle(),
                           tr ("File not found") + ": " + fileInfo.absoluteFilePath());
    exit (-1);
  }
 
  // Open the error report file as if it was a regular Document file
  QXmlStreamReader reader (&file);
  file.open(QIODevice::ReadOnly | QIODevice::Text);
  m_cmdMediator = new CmdMediator(*this,
                                  errorReportFile);
 
  // Load the commands into the shadow command stack
  m_cmdStackShadow->loadCommands (*this,
                                  m_cmdMediator->document(),
                                  reader);
  file.close();
 
  setupAfterLoadNewDocument (errorReportFile,
                             tr ("Error report opened"),
                             IMPORT_TYPE_SIMPLE);
 
  // Start select mode
  m_actionDigitizeSelect->setChecked (true); // We assume user wants to first select existing stuff
  slotDigitizeSelect(); // Trigger transition so cursor gets updated immediately
 
  updateAfterCommand ();
}
 
bool MainWindow::loadImage (const QString &fileName,
                            const QImage &image,
                            ImportType importType)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::loadImage"
                              << " fileName=" << fileName.toLatin1 ().data ()
                              << " importType=" << importType;
 
  bool success;
  if (importType == IMPORT_TYPE_IMAGE_REPLACE) {
    success = loadImageReplacingImage (fileName,
                                       image,
                                       importType);
  } else {
    success = loadImageNewDocument (fileName,
                                    image,
                                    importType);
  }
 
  return success;
}
 
bool MainWindow::loadImageNewDocument (const QString &fileName,
                                       const QImage &image,
                                       ImportType importType)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::loadImageNewDocument"
                              << " fileName=" << fileName.toLatin1 ().data ()
                              << " importType=" << importType;
 
  ENGAUGE_ASSERT (importType != IMPORT_TYPE_IMAGE_REPLACE);
 
  QApplication::setOverrideCursor(Qt::WaitCursor);
  CmdMediator *cmdMediator = new CmdMediator (*this,
                                              image);
  QApplication::restoreOverrideCursor();
 
  setCurrentPathFromFile (fileName);
  // We do not call rebuildRecentFileListForCurrentFile for an image file, so only proper Engauge document files appear in the recent file list
  m_engaugeFile = EMPTY_FILENAME; // Forces first Save to be treated as Save As
 
  delete m_cmdMediator;
 
  m_cmdMediator = cmdMediator;
  bool accepted = setupAfterLoadNewDocument (fileName,
                                             tr ("File imported"),
                                             importType);
 
  if (accepted) {
 
    // Show the wizard if user selected it and we are not running a script
    if (m_actionHelpChecklistGuideWizard->isChecked () &&
        (m_fileCmdScript == nullptr)) {
 
      // Show wizard
      ChecklistGuideWizard *wizard = new ChecklistGuideWizard (*this,
                                                               m_cmdMediator->document().coordSystemCount());
      if (wizard->exec() == QDialog::Accepted) {
 
        for (CoordSystemIndex coordSystemIndex = 0; coordSystemIndex < m_cmdMediator->document().coordSystemCount(); coordSystemIndex++) {
 
          // Populate the checklist guide
          m_dockChecklistGuide->setTemplateHtml (wizard->templateHtml(coordSystemIndex),
                                                 wizard->curveNames(coordSystemIndex));
 
          // Update Document
          CurvesGraphs curvesGraphs;
          wizard->populateCurvesGraphs (coordSystemIndex,
                                        curvesGraphs);
          m_cmdMediator->document().setCurvesGraphs(curvesGraphs);
        }
 
        // Unhide the checklist guide
        m_actionViewChecklistGuide->setChecked (true);
 
        // Update the curve dropdown
        loadCurveListFromCmdMediator();
 
        // Update the CoordSystem dropdown
        loadCoordSystemListFromCmdMediator();
      }
      delete wizard;
    }
 
    // Start axis mode
    m_actionDigitizeAxis->setChecked (true); // We assume user first wants to digitize axis points  
 
    // Trigger transition so cursor gets updated immediately
    if (modeMap ()) {
      slotDigitizeScale ();
    } else if (modeGraph ()) {
      slotDigitizeAxis ();
    }
 
    updateControls ();
  }
 
  return accepted;
}
 
bool MainWindow::loadImageReplacingImage (const QString &fileName,
                                          const QImage &image,
                                          ImportType importType)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::loadImageReplacingImage"
                              << " fileName=" << fileName.toLatin1 ().data ()
                              << " importType=" << importType;
 
  ENGAUGE_ASSERT (importType == IMPORT_TYPE_IMAGE_REPLACE);
 
  setCurrentPathFromFile (fileName);
  // We do not call rebuildRecentFileListForCurrentFile for an image file, so only proper Engauge document files appear in the recent file list
  m_engaugeFile = EMPTY_FILENAME; // Forces first Save to be treated as Save As
 
  ENGAUGE_ASSERT (m_cmdMediator != nullptr); // Menu option should only be available when a document is currently open
 
  m_cmdMediator->document().setPixmap (image);
 
  bool accepted = setupAfterLoadReplacingImage (fileName,
                                                tr ("File imported"),
                                                importType);
 
  // No checklist guide wizard is displayed when just replacing the image
 
  return accepted;
}
 
void MainWindow::loadInputFileForErrorReport(QDomDocument &domInputFile) const
{
  QFile file (m_originalFile);
 
  // File should be available for opening, if not then the dom will be left empty. We assume it has not been
  // modified since opened
  if (!file.open (QIODevice::ReadOnly)) {
    return;
  }
 
  domInputFile.setContent (&file);
  file.close();
}
 
void MainWindow::loadToolTips()
{
  if (m_actionViewToolTips->isChecked ()) {
 
    // Show tool tips
    m_actionDigitizeSelect->setToolTip (m_actionDigitizeSelect->text());
    m_actionDigitizeAxis->setToolTip (m_actionDigitizeAxis->text());
    m_actionDigitizeScale->setToolTip (m_actionDigitizeScale->text());
    m_actionDigitizeCurve->setToolTip (m_actionDigitizeCurve->text());
    m_actionDigitizePointMatch->setToolTip (m_actionDigitizePointMatch->text());
    m_actionDigitizeColorPicker->setToolTip (m_actionDigitizeColorPicker->text());
    m_actionDigitizeSegment->setToolTip (m_actionDigitizeSegment->text());
    m_cmbBackground->setToolTip (tr ("Background image."));
    m_cmbCurve->setToolTip (tr ("Currently selected curve."));
    m_viewPointStyle->setToolTip (tr ("Point style for currently selected curve."));
    m_viewSegmentFilter->setToolTip (tr ("Segment Fill filter for currently selected curve."));
 
  } else {
 
    // Remove any previous tool tips
    m_actionDigitizeSelect->setToolTip ("");
    m_actionDigitizeAxis->setToolTip ("");
    m_actionDigitizeScale->setToolTip ("");
    m_actionDigitizeCurve->setToolTip ("");
    m_actionDigitizePointMatch->setToolTip ("");
    m_actionDigitizeColorPicker->setToolTip ("");
    m_actionDigitizeSegment->setToolTip ("");
    m_cmbBackground->setToolTip ("");
    m_cmbCurve->setToolTip ("");
    m_viewPointStyle->setToolTip ("");
    m_viewSegmentFilter->setToolTip ("");
 
  }
}
 
bool MainWindow::modeGraph () const
{
  bool success = false;
 
  if (m_cmdMediator != nullptr) {
    success = (m_cmdMediator->document().documentAxesPointsRequired() != DOCUMENT_AXES_POINTS_REQUIRED_2);
  }
 
  return success;
}
 
bool MainWindow::modeMap () const
{
  bool success = false;
 
  if (m_cmdMediator != nullptr) {
    success = (m_cmdMediator->document().documentAxesPointsRequired() == DOCUMENT_AXES_POINTS_REQUIRED_2);
  }
 
  return success;
}
 
bool MainWindow::maybeSave()
{
  if (m_cmdMediator != nullptr) {
    if (m_cmdMediator->isModified()) {
      QMessageBox::StandardButton ret = QMessageBox::warning (this,
                                                              engaugeWindowTitle(),
                                                              tr("The document has been modified.\n"
                                                                 "Do you want to save your changes?"),
                                                              QMessageBox::Save | QMessageBox::Discard | QMessageBox::Cancel);
      if (ret == QMessageBox::Save) {
        return slotFileSave();
      } else if (ret == QMessageBox::Cancel) {
        return false;
      }
    }
  }
 
  return true;
}
 
DocumentModelExportFormat MainWindow::modelExportOverride (const DocumentModelExportFormat &modelExportFormatBefore,
                                                           const ExportToFile &exportStrategy,
                                                           const QString &fileName) const
{
  DocumentModelExportFormat modelExportFormatAfter = modelExportFormatBefore;
 
  // See if delimiter setting overrides commas/tabs for files with csv/tsv file extensions respectively
  if (!modelExportFormatAfter.overrideCsvTsv()) {
 
    // Extract file extensions
    QString csvExtension = QString (".%1")
                           .arg (exportStrategy.fileExtensionCsv());
    QString tsvExtension = QString (".%1")
                           .arg (exportStrategy.fileExtensionTsv());
    QString fileExtensionVersusCsv = fileName.right (csvExtension.size());
    QString fileExtensionVersusTsv = fileName.right (tsvExtension.size());
 
    // Override if CSV or TSV was selected. We cannot use QFileDialog::selectedNameFilter() since that is
    // broken in Linux, so we use the file extension
    if (csvExtension.compare (fileExtensionVersusCsv, Qt::CaseInsensitive) == 0) {
      modelExportFormatAfter.setDelimiter (EXPORT_DELIMITER_COMMA);
    } else if (tsvExtension.compare (fileExtensionVersusTsv, Qt::CaseInsensitive) == 0) {
      modelExportFormatAfter.setDelimiter (EXPORT_DELIMITER_TAB);
    }
  }
 
  return modelExportFormatAfter;
}
 
MainWindowModel MainWindow::modelMainWindow () const
{
  return m_modelMainWindow;
}
 
void MainWindow::rebuildRecentFileListForCurrentFile(const QString &filePath)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::rebuildRecentFileListForCurrentFile";
 
  setWindowFilePath (filePath);
 
  QSettings settings (SETTINGS_ENGAUGE, SETTINGS_DIGITIZER);
  QStringList recentFilePaths = settings.value (SETTINGS_RECENT_FILE_LIST).toStringList();
  recentFilePaths.removeAll (filePath); // Remove previous instance of the current filePath
  recentFilePaths.prepend (filePath); // Insert current filePath at start
  while (recentFilePaths.count () > qFloor (MAX_RECENT_FILE_LIST_SIZE)) {
    recentFilePaths.removeLast (); // Remove entry since the number of entries exceeds the limit
  }
  settings.setValue (SETTINGS_RECENT_FILE_LIST, recentFilePaths);
 
  updateRecentFileList();
}
 
void MainWindow::resizeEvent(QResizeEvent *event)
{
  LOG4CPP_DEBUG_S ((*mainCat)) << "MainWindow::resizeEvent";
 
  if (m_actionZoomFill->isChecked ()) {
    slotViewZoomFactor (ZOOM_FILL);
  }
 
  QMainWindow::resizeEvent(event);
}
 
bool MainWindow::saveDocumentFile (const QString &fileName)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::saveDocumentFile fileName=" << fileName.toLatin1 ().data ();
 
  QFile file(fileName);
  if (!file.open(QFile::WriteOnly)) {
    QMessageBox::warning (this,
                          engaugeWindowTitle(),
                          QString ("%1 %2: \n%3.")
                          .arg(tr ("Cannot write file"))
                          .arg(fileName)
                          .arg(file.errorString()));
    return false;
  }
 
  rebuildRecentFileListForCurrentFile (fileName);
 
  QApplication::setOverrideCursor (Qt::WaitCursor);
  QXmlStreamWriter writer(&file);
  writer.setAutoFormatting(true);
  writer.writeStartDocument();
  writer.writeDTD("<!DOCTYPE engauge>");
  m_cmdMediator->document().saveXml(writer);
  writer.writeEndDocument();
  QApplication::restoreOverrideCursor ();
 
  // Notify the undo stack that the current state is now considered "clean". This will automatically trigger a
  // signal back to this class that will update the modified marker in the title bar
  m_cmdMediator->setClean ();
 
  setCurrentFile(fileName);
  m_engaugeFile = fileName;
  updateAfterCommand (); // Enable Save button now that m_engaugeFile is set
  m_statusBar->showTemporaryMessage("File saved");
 
  return true;
}
 
void MainWindow::saveErrorReportFileAndExit (const char *context,
                                             const char *file,
                                             int line,
                                             const char *comment)
{
  // Skip if currently performing a regression test - in which case the preferred behavior is to let the current test fail and
  // continue on to execute the remaining tests
  if ((m_cmdMediator != nullptr) && !m_isErrorReportRegressionTest) {
 
    QString report = saveErrorReportFileAndExitXml (context,
                                                    file,
                                                    line,
                                                    comment);
 
    DlgErrorReportLocal dlg (report);
    if (dlg.exec() == QDialog::Accepted) {
      QFileDialog dlg;
 
      QString fileName = dlg.getSaveFileName (this,
                                              tr("Save"),
                                              "error_report.xml");
      if (!fileName.isEmpty ()) {
        // Save the error report
        QFile fileError (fileName);
        QTextStream str (&fileError);
        fileError.open (QIODevice::WriteOnly | QIODevice::Text);
        str << report;
        fileError.close ();
      }
    }
 
    exit (-1);
  }
}
 
QString MainWindow::saveErrorReportFileAndExitXml (const char *context,
                                                   const char *file,
                                                   int line,
                                                   const char *comment) const
{
  const bool DEEP_COPY = true;
 
  QString xmlErrorReport;
  QXmlStreamWriter writer (&xmlErrorReport);
  writer.setAutoFormatting(true);
 
  // Entire error report contains metadata, commands and other details
  writer.writeStartElement(DOCUMENT_SERIALIZE_ERROR_REPORT);
 
  // Version
  writer.writeStartElement(DOCUMENT_SERIALIZE_APPLICATION);
  writer.writeAttribute(DOCUMENT_SERIALIZE_APPLICATION_VERSION_NUMBER, VERSION_NUMBER);
  writer.writeEndElement();
 
  // Document
  // Insert snapshot xml into writer stream, by reading from reader stream. Highest level of snapshot is DOCUMENT_SERIALIZE_APPLICATION
  QXmlStreamReader reader (m_startingDocumentSnapshot);
  while (!reader.atEnd ()) {
    reader.readNext ();
    if (reader.tokenType() != QXmlStreamReader::StartDocument &&
        reader.tokenType() != QXmlStreamReader::EndDocument &&
        reader.tokenType() != QXmlStreamReader::Invalid) {
      writer.writeCurrentToken (reader);
    }
  }
 
  // Operating system
  writer.writeStartElement(DOCUMENT_SERIALIZE_OPERATING_SYSTEM);
  writer.writeAttribute(DOCUMENT_SERIALIZE_OPERATING_SYSTEM_ENDIAN, EndianToString (QSysInfo::ByteOrder));
  writer.writeAttribute(DOCUMENT_SERIALIZE_OPERATING_SYSTEM_WORD_SIZE, QString::number (QSysInfo::WordSize));
  writer.writeEndElement();
 
  // Placeholder for original file, before the commands in the command stack were applied
  writer.writeStartElement(DOCUMENT_SERIALIZE_FILE);
  writer.writeAttribute(DOCUMENT_SERIALIZE_FILE_IMPORTED,
                        m_originalFileWasImported ? DOCUMENT_SERIALIZE_BOOL_TRUE : DOCUMENT_SERIALIZE_BOOL_FALSE);
  writer.writeEndElement();
 
  // Commands
  m_cmdMediator->saveXml(writer);
 
  // Error
  writer.writeStartElement(DOCUMENT_SERIALIZE_ERROR);
  writer.writeAttribute(DOCUMENT_SERIALIZE_ERROR_CONTEXT, context);
  writer.writeAttribute(DOCUMENT_SERIALIZE_ERROR_FILE, file);
  writer.writeAttribute(DOCUMENT_SERIALIZE_ERROR_LINE, QString::number (line));
  writer.writeAttribute(DOCUMENT_SERIALIZE_ERROR_COMMENT, comment);
  writer.writeEndElement();
 
  writer.writeEndElement();
 
  // Put string into DOM
  QDomDocument domErrorReport ("ErrorReport");
  domErrorReport.setContent (xmlErrorReport);
 
  // Postprocessing
  if (!m_originalFileWasImported) {
 
    // Insert the original file into its placeholder, by manipulating the source and target xml as DOM documents. Very early
    // in the loading process, the original file may not be specified yet (m_originalFile is empty)
    QDomDocument domInputFile;
    loadInputFileForErrorReport (domInputFile);
    QDomDocumentFragment fragmentFileFrom = domErrorReport.createDocumentFragment();
    if (!domInputFile.isNull()) {
      fragmentFileFrom.appendChild (domErrorReport.importNode (domInputFile.documentElement(), DEEP_COPY));
    }
    QDomNodeList nodesFileTo = domErrorReport.elementsByTagName (DOCUMENT_SERIALIZE_FILE);
    if (nodesFileTo.count () > 0) {
      QDomNode nodeFileTo = nodesFileTo.at (0);
      nodeFileTo.appendChild (fragmentFileFrom);
    }
 
    // Replace DOCUMENT_SERIALIZE_IMAGE by same node with CDATA removed, since:
    // 1) it is very big and working with smaller files, especially in emails, is easier
    // 2) removing the image better preserves user's privacy
    // 3) having the actual image does not help that much when debugging
    QDomNodeList nodesDocument = domErrorReport.elementsByTagName (DOCUMENT_SERIALIZE_DOCUMENT);
    for (int i = 0 ; i < nodesDocument.count(); i++) {
      QDomNode nodeDocument = nodesDocument.at (i);
      QDomElement elemImage = nodeDocument.firstChildElement(DOCUMENT_SERIALIZE_IMAGE);
      if (!elemImage.isNull()) {
 
        // Get old image attributes so we can create an empty document with the same size
        if (elemImage.hasAttribute (DOCUMENT_SERIALIZE_IMAGE_WIDTH) &&
            elemImage.hasAttribute (DOCUMENT_SERIALIZE_IMAGE_HEIGHT)) {
 
          int width = elemImage.attribute(DOCUMENT_SERIALIZE_IMAGE_WIDTH).toInt();
          int height = elemImage.attribute(DOCUMENT_SERIALIZE_IMAGE_HEIGHT).toInt();
 
          QDomNode nodeReplacement;
          QDomElement elemReplacement = nodeReplacement.toElement();
          elemReplacement.setAttribute (DOCUMENT_SERIALIZE_IMAGE_WIDTH, width);
          elemReplacement.setAttribute (DOCUMENT_SERIALIZE_IMAGE_HEIGHT, height);
 
          // Replace with the new and then remove the old
          nodeDocument.insertBefore (nodeReplacement,
                                     elemImage);
          nodeDocument.removeChild(elemImage);
        }
      }
    }
  }
 
  return domErrorReport.toString();
}
 
void MainWindow::saveStartingDocumentSnapshot()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::saveStartingDocumentSnapshot";
 
  QXmlStreamWriter writer (&m_startingDocumentSnapshot);
  writer.setAutoFormatting (true);
  m_cmdMediator->document().saveXml (writer);
}
 
GraphicsScene &MainWindow::scene ()
{
  ENGAUGE_CHECK_PTR (m_scene);
  return *m_scene;
}
 
BackgroundImage MainWindow::selectOriginal(BackgroundImage backgroundImage)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::selectBackgroundOriginal";
 
  BackgroundImage previousBackground = static_cast<BackgroundImage> (m_cmbBackground->currentData().toInt());
 
  int index = m_cmbBackground->findData (backgroundImage);
  ENGAUGE_ASSERT (index >= 0);
 
  m_cmbBackground->setCurrentIndex(index);
 
  return previousBackground;
}
 
QString MainWindow::selectedGraphCurve () const
{
  return m_cmbCurve->currentText ();
}
 
void MainWindow::setCurrentFile (const QString &fileName)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::setCurrentFile";
 
  QString fileNameStripped;
  if (!fileName.isEmpty()) {
 
    // Strip out path and file extension. We use completeBaseName rather than baseName so
    // files with multiple periods are handled correctly - all but last suffix gets kept
    QFileInfo fileInfo (fileName);
    fileNameStripped = fileInfo.completeBaseName();
  }
 
  m_currentFile = fileNameStripped;
  m_currentFileWithPathAndFileExtension = fileName;
 
  updateWindowTitle ();
}
 
void MainWindow::setCurrentPathFromFile (const QString &fileName)
{
  QDir dir = QFileInfo (fileName).absoluteDir();
 
  if (dir.exists ()) {
 
    bool success = QDir::setCurrent (dir.absolutePath ()); // Return to chosen directory the next time
    ENGAUGE_ASSERT (success);
 
  } else {
 
    // File was a url so it is irrelevant to the current directory
  }
}
 
void MainWindow::setNonFillZoomFactor (ZoomFactor newZoomFactor)
{
  ENGAUGE_ASSERT (newZoomFactor != ZOOM_FILL);
 
  // Update controls and apply zoom factor
  m_zoomMapToAction [newZoomFactor]->setChecked (true);
  slotViewZoomFactor (newZoomFactor);
}
 
void MainWindow::setPixmap (const QString &curveSelected,
                            const QPixmap &pixmap)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::setPixmap";
 
  m_digitizeStateContext->setImageIsLoaded (m_cmdMediator,
                                            true);
 
  // We cannot reliably use m_cmbCurve->currentText below for the selected curve since that control
  // can be pointing to a curve that no longer exists so this method requires curveSelected as an argument
  m_backgroundStateContext->setPixmap (m_isGnuplot,
                                       m_transformation,
                                       m_cmdMediator->document().modelGridRemoval(),
                                       m_cmdMediator->document().modelColorFilter(),
                                       pixmap,
                                       curveSelected);
}
 
void MainWindow::settingsRead (bool isReset)
{
  QSettings settings (SETTINGS_ENGAUGE, SETTINGS_DIGITIZER);
 
  if (isReset) {
    // Delete all settings. Default values are specified, later, for each settings as it is loaded
    settings.clear ();
  }
 
  settingsReadEnvironment (settings);
  settingsReadMainWindow (settings);
}
 
void MainWindow::settingsReadEnvironment (QSettings &settings)
{
  settings.beginGroup (SETTINGS_GROUP_ENVIRONMENT);
  QDir::setCurrent (settings.value (SETTINGS_CURRENT_DIRECTORY,
                                    QDir::currentPath ()).toString ());
  settings.endGroup ();
}
 
void MainWindow::settingsReadMainWindow (QSettings &settings)
{  
  settings.beginGroup(SETTINGS_GROUP_MAIN_WINDOW);
 
  // Main window geometry
  resize (settings.value (SETTINGS_SIZE,
                          QSize (600, 600)).toSize ());
  move (settings.value (SETTINGS_POS,
                        QPoint (200, 200)).toPoint ());
 
  // Help window geometry
#if !defined(OSX_DEBUG) && !defined(OSX_RELEASE)
  QSize helpSize = settings.value (SETTINGS_HELP_SIZE,
                                   QSize (900, 600)).toSize();
  m_helpWindow->resize (helpSize);
  if (settings.contains (SETTINGS_HELP_POS)) {
    QPoint helpPos = settings.value (SETTINGS_HELP_POS).toPoint();
    m_helpWindow->move (helpPos);
  }
#endif
 
  // Checklist guide wizard
  m_actionHelpChecklistGuideWizard->setChecked (settings.value (SETTINGS_CHECKLIST_GUIDE_WIZARD,
                                                            true).toBool ());
 
  // Background toolbar visibility
  bool viewBackgroundToolBar = settings.value (SETTINGS_VIEW_BACKGROUND_TOOLBAR,
                                               true).toBool ();
  m_actionViewBackground->setChecked (viewBackgroundToolBar);
  m_toolBackground->setVisible (viewBackgroundToolBar);
  BackgroundImage backgroundImage = static_cast<BackgroundImage> (settings.value (SETTINGS_BACKGROUND_IMAGE,
                                                                                  BACKGROUND_IMAGE_FILTERED).toInt ());
  int indexBackground = m_cmbBackground->findData (QVariant (backgroundImage));
  m_cmbBackground->setCurrentIndex (indexBackground);
 
  // Digitize toolbar visibility
  bool viewDigitizeToolBar = settings.value (SETTINGS_VIEW_DIGITIZE_TOOLBAR,
                                             true).toBool ();
  m_actionViewDigitize->setChecked (viewDigitizeToolBar);
  m_toolDigitize->setVisible (viewDigitizeToolBar);
 
  // Views toolbar visibility
  bool viewSettingsViewsToolBar = settings.value (SETTINGS_VIEW_SETTINGS_VIEWS_TOOLBAR,
                                                  true).toBool ();
  m_actionViewSettingsViews->setChecked (viewSettingsViewsToolBar);
  m_toolSettingsViews->setVisible (viewSettingsViewsToolBar);
 
  // Coordinate system toolbar visibility
  bool viewCoordSystemToolbar = settings.value (SETTINGS_VIEW_COORD_SYSTEM_TOOLBAR,
                                                false).toBool ();
  m_actionViewCoordSystem->setChecked (viewCoordSystemToolbar);
  m_toolCoordSystem->setVisible (viewCoordSystemToolbar);
 
  // Tooltips visibility
  bool viewToolTips = settings.value (SETTINGS_VIEW_TOOL_TIPS,
                                      true).toBool ();
  m_actionViewToolTips->setChecked (viewToolTips);
  loadToolTips ();
 
  // Statusbar visibility
  StatusBarMode statusBarMode = static_cast<StatusBarMode> (settings.value (SETTINGS_VIEW_STATUS_BAR,
                                                                            false).toInt ());
  m_statusBar->setStatusBarMode (statusBarMode);
  m_actionStatusNever->setChecked (statusBarMode == STATUS_BAR_MODE_NEVER);
  m_actionStatusTemporary->setChecked (statusBarMode == STATUS_BAR_MODE_TEMPORARY);
  m_actionStatusAlways->setChecked (statusBarMode == STATUS_BAR_MODE_ALWAYS);
 
  addDockWindow (m_dockChecklistGuide,
                 settings,
                 SETTINGS_CHECKLIST_GUIDE_DOCK_AREA,
                 SETTINGS_CHECKLIST_GUIDE_DOCK_GEOMETRY,
                 Qt::RightDockWidgetArea);
  addDockWindow (m_dockFittingWindow,
                 settings,
                 SETTINGS_FITTING_WINDOW_DOCK_AREA,
                 SETTINGS_FITTING_WINDOW_DOCK_GEOMETRY,
                 Qt::RightDockWidgetArea);
  addDockWindow (m_dockGeometryWindow,
                 settings,
                 SETTINGS_GEOMETRY_WINDOW_DOCK_AREA,
                 SETTINGS_GEOMETRY_WINDOW_DOCK_GEOMETRY,
                 Qt::RightDockWidgetArea);
 
  // Main window settings. Preference for initial zoom factor is 100%, rather than fill mode, for issue #25. Some or all
  // settings are saved to the application AND saved to m_modelMainWindow for use in DlgSettingsMainWindow. Note that
  // TranslatorContainer has previously extracted the locale from the settings
  QLocale localeDefault;
  QLocale::Language language = static_cast<QLocale::Language> (settings.value (SETTINGS_LOCALE_LANGUAGE,
                                                                               QVariant (localeDefault.language())).toInt());
  QLocale::Country country = static_cast<QLocale::Country> (settings.value (SETTINGS_LOCALE_COUNTRY,
                                                                            QVariant (localeDefault.country())).toInt());
  QLocale locale (language,
                  country);
  slotViewZoom (static_cast<ZoomFactor> (settings.value (SETTINGS_ZOOM_FACTOR,
                                                         QVariant (ZOOM_1_TO_1)).toInt()));
  m_modelMainWindow.setLocale (locale);
  m_modelMainWindow.setZoomFactorInitial(static_cast<ZoomFactorInitial> (settings.value (SETTINGS_ZOOM_FACTOR_INITIAL,
                                                                                         QVariant (DEFAULT_ZOOM_FACTOR_INITIAL)).toInt()));
  m_modelMainWindow.setZoomControl (static_cast<ZoomControl> (settings.value (SETTINGS_ZOOM_CONTROL,
                                                                              QVariant (ZOOM_CONTROL_MENU_WHEEL_PLUSMINUS)).toInt()));
  m_modelMainWindow.setMainTitleBarFormat (static_cast<MainTitleBarFormat> (settings.value (SETTINGS_MAIN_TITLE_BAR_FORMAT,
                                                                                            QVariant (MAIN_TITLE_BAR_FORMAT_PATH)).toInt()));
  m_modelMainWindow.setPdfResolution (settings.value (SETTINGS_IMPORT_PDF_RESOLUTION,
                                                      QVariant (DEFAULT_IMPORT_PDF_RESOLUTION)).toInt ());
  m_modelMainWindow.setImportCropping (static_cast<ImportCropping> (settings.value (SETTINGS_IMPORT_CROPPING,
                                                                                    QVariant (DEFAULT_IMPORT_CROPPING)).toInt ()));
  m_modelMainWindow.setMaximumGridLines (settings.value (SETTINGS_MAXIMUM_GRID_LINES,
                                                         QVariant (DEFAULT_MAXIMUM_GRID_LINES)).toInt ());
  m_modelMainWindow.setHighlightOpacity (settings.value (SETTINGS_HIGHLIGHT_OPACITY,
                                                         QVariant (DEFAULT_HIGHLIGHT_OPACITY)).toDouble ());
  m_modelMainWindow.setSmallDialogs (settings.value (SETTINGS_SMALL_DIALOGS,
                                                     QVariant (DEFAULT_SMALL_DIALOGS)).toBool ());
  m_modelMainWindow.setDragDropExport (settings.value (SETTINGS_DRAG_DROP_EXPORT,
                                                       QVariant (DEFAULT_DRAG_DROP_EXPORT)).toBool ());
  m_modelMainWindow.setSignificantDigits (settings.value (SETTINGS_SIGNIFICANT_DIGITS,
                                                          QVariant (DEFAULT_SIGNIFICANT_DIGITS)).toInt ());
  m_modelMainWindow.setImageReplaceRenamesDocument (settings.value (SETTINGS_IMAGE_REPLACE_RENAMES_DOCUMENT,
                                                                    QVariant (DEFAULT_IMAGE_REPLACE_RENAMES_DOCUMENT)).toBool ());
 
  // MainDirectoryPersist starts with directories from last execution
  MainDirectoryPersist directoryPersist;
  directoryPersist.setDirectoryExportSaveFromSavedPath (settings.value (SETTINGS_MAIN_DIRECTORY_EXPORT_SAVE,
                                                                        QVariant (QDir::currentPath())).toString ());
  directoryPersist.setDirectoryImportLoadFromSavedPath (settings.value (SETTINGS_MAIN_DIRECTORY_IMPORT_LOAD,
                                                                        QVariant (QDir::currentPath())).toString ());
 
  updateSettingsMainWindow();
  updateSmallDialogs();
 
  settings.endGroup();
}
 
void MainWindow::settingsWrite ()
{
  MainDirectoryPersist directoryPersist;
 
  QSettings settings (SETTINGS_ENGAUGE, SETTINGS_DIGITIZER);
 
  settings.beginGroup (SETTINGS_GROUP_ENVIRONMENT);
  settings.setValue (SETTINGS_CURRENT_DIRECTORY, QDir::currentPath ());
  settings.endGroup ();
 
  settings.beginGroup (SETTINGS_GROUP_MAIN_WINDOW);
  settings.setValue (SETTINGS_SIZE, size ());
  settings.setValue (SETTINGS_POS, pos ());
#if !defined(OSX_DEBUG) && !defined(OSX_RELEASE)
  settings.setValue (SETTINGS_HELP_SIZE, m_helpWindow->size());
  settings.setValue (SETTINGS_HELP_POS, m_helpWindow->pos ());
#endif
  if (m_dockChecklistGuide->isFloating()) {
 
    settings.setValue (SETTINGS_CHECKLIST_GUIDE_DOCK_AREA, Qt::NoDockWidgetArea);
    settings.setValue (SETTINGS_CHECKLIST_GUIDE_DOCK_GEOMETRY, m_dockChecklistGuide->saveGeometry ());
 
  } else {
 
    settings.setValue (SETTINGS_CHECKLIST_GUIDE_DOCK_AREA, dockWidgetArea (m_dockChecklistGuide));
 
  }
  if (m_dockFittingWindow->isFloating()) {
 
    settings.setValue (SETTINGS_FITTING_WINDOW_DOCK_AREA, Qt::NoDockWidgetArea);
    settings.setValue (SETTINGS_FITTING_WINDOW_DOCK_GEOMETRY, m_dockFittingWindow->saveGeometry());
  } else {
 
    settings.setValue (SETTINGS_FITTING_WINDOW_DOCK_AREA, dockWidgetArea (m_dockFittingWindow));
  }
  if (m_dockGeometryWindow->isFloating()) {
 
    settings.setValue (SETTINGS_GEOMETRY_WINDOW_DOCK_AREA, Qt::NoDockWidgetArea);
    settings.setValue (SETTINGS_GEOMETRY_WINDOW_DOCK_GEOMETRY, m_dockGeometryWindow->saveGeometry ());
 
  } else {
 
    settings.setValue (SETTINGS_GEOMETRY_WINDOW_DOCK_AREA, dockWidgetArea (m_dockGeometryWindow));
 
  }
  settings.setValue (SETTINGS_BACKGROUND_IMAGE, m_cmbBackground->currentData().toInt());
  settings.setValue (SETTINGS_CHECKLIST_GUIDE_WIZARD, m_actionHelpChecklistGuideWizard->isChecked ());
  settings.setValue (SETTINGS_DRAG_DROP_EXPORT, m_modelMainWindow.dragDropExport ());
  settings.setValue (SETTINGS_HIGHLIGHT_OPACITY, m_modelMainWindow.highlightOpacity());
  settings.setValue (SETTINGS_IMAGE_REPLACE_RENAMES_DOCUMENT, m_modelMainWindow.imageReplaceRenamesDocument());
  settings.setValue (SETTINGS_IMPORT_CROPPING, m_modelMainWindow.importCropping());
  settings.setValue (SETTINGS_IMPORT_PDF_RESOLUTION, m_modelMainWindow.pdfResolution ());
  settings.setValue (SETTINGS_LOCALE_LANGUAGE, m_modelMainWindow.locale().language());
  settings.setValue (SETTINGS_LOCALE_COUNTRY, m_modelMainWindow.locale().country());
  settings.setValue (SETTINGS_MAIN_DIRECTORY_EXPORT_SAVE,
                     directoryPersist.getDirectoryExportSave().absolutePath());
  settings.setValue (SETTINGS_MAIN_DIRECTORY_IMPORT_LOAD,
                     directoryPersist.getDirectoryImportOpen().absolutePath());
  settings.setValue (SETTINGS_MAIN_TITLE_BAR_FORMAT, m_modelMainWindow.mainTitleBarFormat());
  settings.setValue (SETTINGS_MAXIMUM_GRID_LINES, m_modelMainWindow.maximumGridLines());
  settings.setValue (SETTINGS_SMALL_DIALOGS, m_modelMainWindow.smallDialogs());
  settings.setValue (SETTINGS_VIEW_BACKGROUND_TOOLBAR, m_actionViewBackground->isChecked());
  settings.setValue (SETTINGS_VIEW_DIGITIZE_TOOLBAR, m_actionViewDigitize->isChecked ());
  settings.setValue (SETTINGS_VIEW_STATUS_BAR, m_statusBar->statusBarMode ());
  settings.setValue (SETTINGS_VIEW_SETTINGS_VIEWS_TOOLBAR, m_actionViewSettingsViews->isChecked ());
  settings.setValue (SETTINGS_VIEW_COORD_SYSTEM_TOOLBAR, m_actionViewCoordSystem->isChecked ());
  settings.setValue (SETTINGS_VIEW_TOOL_TIPS, m_actionViewToolTips->isChecked ());
  settings.setValue (SETTINGS_ZOOM_CONTROL, m_modelMainWindow.zoomControl());
  settings.setValue (SETTINGS_ZOOM_FACTOR, currentZoomFactor ());
  settings.setValue (SETTINGS_ZOOM_FACTOR_INITIAL, m_modelMainWindow.zoomFactorInitial());
  settings.endGroup ();
}
 
bool MainWindow::setupAfterLoadNewDocument (const QString &fileName,
                                            const QString &temporaryMessage ,
                                            ImportType importType)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::setupAfterLoadNewDocument"
                              << " file=" << fileName.toLatin1().data()
                              << " message=" << temporaryMessage.toLatin1().data()
                              << " importType=" << importType;
 
  // The steps in this method should theoretically be a superset of the steps in setupAfterLoadNewDocument. Therefore, any
  // changes to this method should be considered for application to the other method also
 
  const QString EMPTY_CURVE_NAME_TO_SKIP_BACKGROUND_PROCESSING; // For bootstrapping the preview
 
  // At this point the code assumes CmdMediator for the NEW Document is already stored in m_cmdMediator
 
  m_digitizeStateContext->resetOnLoad (m_cmdMediator); // Before setPixmap
  m_backgroundStateContext->setCurveSelected (m_isGnuplot,
                                              m_transformation,
                                              m_cmdMediator->document().modelGridRemoval(),
                                              m_cmdMediator->document().modelColorFilter(),
                                              EMPTY_CURVE_NAME_TO_SKIP_BACKGROUND_PROCESSING); // Before setPixmap
  setPixmap (m_cmdMediator->document().curvesGraphsNames().first(),
             m_cmdMediator->pixmap ()); // Set background immediately so it is visible as a preview when any dialogs are displayed
 
  // Image is visible now so the user can refer to it when we ask for the number of coordinate systems. Note that the Document
  // may already have multiple CoordSystem if user loaded a file that had multiple CoordSystem entries
  if (importType == IMPORT_TYPE_ADVANCED) {
 
    applyZoomFactorAfterLoad(); // Apply the currently selected zoom factor
 
    DlgImportAdvanced dlgImportAdvanced (*this);
    dlgImportAdvanced.exec();
 
    if (dlgImportAdvanced.result() == QDialog::Rejected) {
      return false;
    }
 
    int numberCoordSystem = signed (dlgImportAdvanced.numberCoordSystem());
    m_cmdMediator->document().addCoordSystems (unsigned (numberCoordSystem - 1));
    m_cmdMediator->setDocumentAxesPointsRequired (dlgImportAdvanced.documentAxesPointsRequired());
  }
 
  m_transformation.resetOnLoad();
  m_transformationStateContext->resetOnLoad();
  m_scene->resetOnLoad();
 
  connect (m_actionEditUndo, SIGNAL (triggered ()), m_cmdMediator, SLOT (undo ()));
  connect (m_actionEditUndo, SIGNAL (triggered ()), m_cmdStackShadow, SLOT (slotUndo ()));
  connect (m_actionEditRedo, SIGNAL (triggered ()), m_cmdMediator, SLOT (redo ())); // No effect until CmdMediator::undo and CmdStackShadow::slotUndo get called
  connect (m_actionEditRedo, SIGNAL (triggered ()), m_cmdStackShadow, SLOT (slotRedo ())); // No effect after CmdMediator::undo and CmdStackShadow::slotUndo get called
  connect (m_cmdMediator, SIGNAL (canRedoChanged(bool)), this, SLOT (slotCanRedoChanged (bool)));
  connect (m_cmdMediator, SIGNAL (canUndoChanged(bool)), this, SLOT (slotCanUndoChanged (bool)));
  connect (m_cmdMediator, SIGNAL (redoTextChanged (const QString &)), this, SLOT (slotRedoTextChanged (const QString &)));
  connect (m_cmdMediator, SIGNAL (undoTextChanged (const QString &)), this, SLOT (slotUndoTextChanged (const QString &)));
  loadCurveListFromCmdMediator ();
  loadCoordSystemListFromCmdMediator ();
  updateViewsOfSettings ();
 
  m_isDocumentExported = false;
 
  // Background must be set (by setPixmap) before slotViewZoomFactor which relies on the background. At this point
  // the transformation is undefined (unless the code is changed) so grid removal will not work
  // but updateTransformationAndItsDependencies will call this again to fix that issue. Note that the selected
  // curve name was set (by setCurveSelected) earlier before the call to setPixmap
  m_backgroundStateContext->setCurveSelected (m_isGnuplot,
                                              m_transformation,
                                              m_cmdMediator->document().modelGridRemoval(),
                                              m_cmdMediator->document().modelColorFilter(),
                                              m_cmbCurve->currentText ());
  m_backgroundStateContext->setBackgroundImage (static_cast<BackgroundImage> (m_cmbBackground->currentIndex ()));
 
  applyZoomFactorAfterLoad(); // Zoom factor must be reapplied after background image is set, to have any effect
 
  setCurrentFile(fileName);
  m_statusBar->showTemporaryMessage (temporaryMessage);
  m_statusBar->wakeUp ();
 
  saveStartingDocumentSnapshot();
 
  updateAfterCommand(); // Replace stale points by points in new Document
 
  return true;
}
 
bool MainWindow::setupAfterLoadReplacingImage (const QString &fileName,
                                               const QString &temporaryMessage ,
                                               ImportType importType)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::setupAfterLoadReplacingImage"
                              << " file=" << fileName.toLatin1().data()
                              << " message=" << temporaryMessage.toLatin1().data()
                              << " importType=" << importType;
 
  // The steps in this method should theoretically be just a subset of the steps in setupAfterLoadNewDocument
 
  // After this point there should be no commands in CmdMediator, since we effectively have a new document
  m_cmdMediator->clear();
 
  setPixmap (m_cmdMediator->document().curvesGraphsNames().first(),
             m_cmdMediator->pixmap ()); // Set background immediately so it is visible as a preview when any dialogs are displayed
 
  m_isDocumentExported = false;
 
  m_backgroundStateContext->setBackgroundImage (static_cast<BackgroundImage> (m_cmbBackground->currentIndex ()));
 
  applyZoomFactorAfterLoad(); // Zoom factor must be reapplied after background image is set, to have any effect
 
  // Some people prefer
  if (m_modelMainWindow.imageReplaceRenamesDocument()) {
    setCurrentFile(fileName);
  }
 
  m_statusBar->showTemporaryMessage (temporaryMessage);
  m_statusBar->wakeUp ();
 
  saveStartingDocumentSnapshot();
 
  updateAfterCommand(); // Replace stale points by points in new Document
 
  return true;
}
 
void MainWindow::showEvent (QShowEvent *event)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::showEvent"
                              << " files=" << m_loadStartupFiles.join (",").toLatin1().data();
 
  QMainWindow::showEvent (event);
 
  if (m_loadStartupFiles.count() > 0) {
 
    m_timerLoadStartupFiles = new QTimer;
    m_timerLoadStartupFiles->setSingleShot (true);
    connect (m_timerLoadStartupFiles, SIGNAL (timeout ()), this, SLOT (slotLoadStartupFiles ()));
    m_timerLoadStartupFiles->start (0); // Zero delay still waits until execution finishes and gui is available
 
  }
}
 
void MainWindow::showTemporaryMessage (const QString &temporaryMessage)
{
  m_statusBar->showTemporaryMessage (temporaryMessage);
}
 
void MainWindow::slotBtnPrintAll ()
{
  LOG4CPP_DEBUG_S ((*mainCat)) << "MainWindow::slotBtnPrintAll";
 
  ghostsCreate ();
 
  QPrinter printer (QPrinter::HighResolution);
  QPrintDialog dlg (&printer, this);
  if (dlg.exec() == QDialog::Accepted) {
    QPainter painter (&printer);
    m_view->render (&painter);
    painter.end();
  }
 
  ghostsDestroy ();
}
 
void MainWindow::slotBtnShowAllPressed ()
{
  LOG4CPP_DEBUG_S ((*mainCat)) << "MainWindow::slotBtnShowAllPressed";
 
  // Start of press-release sequence
  ghostsCreate ();
}
 
void MainWindow::slotBtnShowAllReleased ()
{
  LOG4CPP_DEBUG_S ((*mainCat)) << "MainWindow::slotBtnShowAllReleased";
 
  // End of press-release sequence
  ghostsDestroy ();
}
 
void MainWindow::slotCanRedoChanged (bool canRedo)
{
  LOG4CPP_DEBUG_S ((*mainCat)) << "MainWindow::slotCanRedoChanged";
 
  m_actionEditRedo->setEnabled (canRedo || m_cmdStackShadow->canRedo());
}
 
void MainWindow::slotCanUndoChanged (bool canUndo)
{
  LOG4CPP_DEBUG_S ((*mainCat)) << "MainWindow::slotCanUndoChanged";
 
  m_actionEditUndo->setEnabled (canUndo);
}
 
void MainWindow::slotChecklistClosed()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotChecklistClosed";
 
  m_actionViewChecklistGuide->setChecked (false);
}
 
void MainWindow::slotCleanChanged(bool clean)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotCleanChanged";
 
  setWindowModified (!clean);
}
 
void MainWindow::slotCmbBackground(int currentIndex)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotCmbBackground";
 
  switch (currentIndex) {
    case BACKGROUND_IMAGE_NONE:
      if (!m_actionViewBackgroundNone->isChecked()) {
        m_actionViewBackgroundNone->toggle();
      }
      break;
 
    case BACKGROUND_IMAGE_ORIGINAL:
      if (!m_actionViewBackgroundOriginal->isChecked ()) {
          m_actionViewBackgroundOriginal->toggle();
      }
      break;
 
    case BACKGROUND_IMAGE_FILTERED:
      if (!m_actionViewBackgroundFiltered->isChecked ()) {
        m_actionViewBackgroundFiltered->toggle();
      }
      break;
  }
 
  m_backgroundStateContext->setBackgroundImage (static_cast<BackgroundImage> (currentIndex));
}
 
void MainWindow::slotCmbCoordSystem(int index)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotCmbCoordSystem";
 
  CmdSelectCoordSystem *cmd = new CmdSelectCoordSystem (*this,
                                                        m_cmdMediator->document(),
                                                        static_cast<CoordSystemIndex> (index));
 
  m_cmdMediator->push (cmd);
}
 
void MainWindow::slotCmbCurve(int /* index */)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotCmbCurve";
 
  m_backgroundStateContext->setCurveSelected (m_isGnuplot,
                                              m_transformation,
                                              m_cmdMediator->document().modelGridRemoval(),
                                              m_cmdMediator->document().modelColorFilter(),
                                              m_cmbCurve->currentText ());
  m_digitizeStateContext->handleCurveChange (m_cmdMediator);
  m_cmdMediator->setSelectedCurveName (m_cmbCurve->currentText ()); // Save for next time current coordinate system returns
 
  updateViewedCurves();
  updateViewsOfSettings();
  updateFittingWindow();
  updateGeometryWindow();
}
 
void MainWindow::slotContextMenuEventAxis (QString pointIdentifier)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotContextMenuEventAxis point=" << pointIdentifier.toLatin1 ().data ();
 
  m_digitizeStateContext->handleContextMenuEventAxis (m_cmdMediator,
                                                      pointIdentifier);
}
 
void MainWindow::slotContextMenuEventGraph (QStringList pointIdentifiers)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotContextMenuEventGraph point=" << pointIdentifiers.join(",").toLatin1 ().data ();
 
  m_digitizeStateContext->handleContextMenuEventGraph (m_cmdMediator,
                                                       pointIdentifiers);
}
 
void MainWindow::slotDigitizeAxis ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotDigitizeAxis";
 
  m_digitizeStateContext->requestImmediateStateTransition (m_cmdMediator,
                                                           DIGITIZE_STATE_AXIS);
  m_cmbCurve->setEnabled (false); // Graph curve is irrelevant in this mode
  m_viewPointStyle->setEnabled (true); // Point style is important in this mode
  m_viewSegmentFilter->setEnabled (true); // Filtering is important in this mode
  updateControls (); // For Paste which is state dependent
}
 
void MainWindow::slotDigitizeColorPicker ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotDigitizeColorPicker";
 
  m_digitizeStateContext->requestImmediateStateTransition (m_cmdMediator,
                                                           DIGITIZE_STATE_COLOR_PICKER);
  m_cmbCurve->setEnabled (true);
  m_viewPointStyle->setEnabled (true);
  m_viewSegmentFilter->setEnabled (true);
  updateControls (); // For Paste which is state dependent
}
 
void MainWindow::slotDigitizeCurve ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotDigitizeCurve";
 
  m_digitizeStateContext->requestImmediateStateTransition (m_cmdMediator,
                                                           DIGITIZE_STATE_CURVE);
  m_cmbCurve->setEnabled (true);
  m_viewPointStyle->setEnabled (true);
  m_viewSegmentFilter->setEnabled (true);
  updateControls (); // For Paste which is state dependent
}
 
void MainWindow::slotDigitizePointMatch ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotDigitizePointMatch";
 
  m_digitizeStateContext->requestImmediateStateTransition (m_cmdMediator,
                                                           DIGITIZE_STATE_POINT_MATCH);
  m_cmbCurve->setEnabled (true);
  m_viewPointStyle->setEnabled (true);
  m_viewSegmentFilter->setEnabled (true);
  updateControls (); // For Paste which is state dependent
}
 
void MainWindow::slotDigitizeScale ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotDigitizeScale";
 
  m_digitizeStateContext->requestImmediateStateTransition (m_cmdMediator,
                                                           DIGITIZE_STATE_SCALE);
  m_cmbCurve->setEnabled (false);
  m_viewPointStyle->setEnabled (false);
  m_viewSegmentFilter->setEnabled (false);
  updateControls (); // For Paste which is state dependent
}
 
void MainWindow::slotDigitizeSegment ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotDigitizeSegment";
 
  m_digitizeStateContext->requestImmediateStateTransition (m_cmdMediator,
                                                           DIGITIZE_STATE_SEGMENT);
  m_cmbCurve->setEnabled (true);
  m_viewPointStyle->setEnabled (true);
  m_viewSegmentFilter->setEnabled (true);
  updateControls (); // For Paste which is state dependent
}
 
void MainWindow::slotDigitizeSelect ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotDigitizeSelect";
 
  m_digitizeStateContext->requestImmediateStateTransition (m_cmdMediator,
                                                           DIGITIZE_STATE_SELECT);
  m_cmbCurve->setEnabled (false);
  m_viewPointStyle->setEnabled (false);
  m_viewSegmentFilter->setEnabled (false);
  updateControls (); // For Paste which is state dependent
}
 
void MainWindow::slotEditCopy ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotEditCopy";
 
  // Copy command is sent to FittingWindow or GeometryWindow, or processed locally
  bool tableFittingIsActive, tableFittingIsCopyable;
  bool tableGeometryIsActive, tableGeometryIsCopyable;
  m_dockFittingWindow->getTableStatus (tableFittingIsActive, tableFittingIsCopyable); // Fitting window status
  m_dockGeometryWindow->getTableStatus (tableGeometryIsActive, tableGeometryIsCopyable); // Geometry window status
 
  if (tableFittingIsActive) {
 
    // Send to FittingWindow
    m_dockFittingWindow->doCopy ();
 
  } else if (tableGeometryIsActive) {
 
    // Send to GeometryWindow
    m_dockGeometryWindow->doCopy ();
 
  } else {
 
    // Process curve points in main window
    GraphicsItemsExtractor graphicsItemsExtractor;
    const QList<QGraphicsItem*> &items = m_scene->selectedItems();
    QStringList pointIdentifiers = graphicsItemsExtractor.selectedPointIdentifiers (items);
 
    CmdCopy *cmd = new CmdCopy (*this,
                                m_cmdMediator->document(),
                                pointIdentifiers);
    m_digitizeStateContext->appendNewCmd (m_cmdMediator,
                                          cmd);
  }
}
 
void MainWindow::slotEditCut ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotEditCut";
 
  // Copy command is sent to FittingWindow or GeometryWindow, or processed locally
  bool tableFittingIsActive, tableFittingIsCopyable;
  bool tableGeometryIsActive, tableGeometryIsCopyable;
  m_dockFittingWindow->getTableStatus (tableFittingIsActive, tableFittingIsCopyable); // Fitting window status
  m_dockGeometryWindow->getTableStatus (tableGeometryIsActive, tableGeometryIsCopyable); // Geometry window status
 
  if (tableFittingIsActive || tableGeometryIsActive) {
 
    // Cannot delete from fitting or geometry windows
 
  } else {
 
    // Process curve points in main window
    GraphicsItemsExtractor graphicsItemsExtractor;
    const QList<QGraphicsItem*> &items = m_scene->selectedItems();
    QStringList pointIdentifiers = graphicsItemsExtractor.selectedPointIdentifiers (items);
 
    CmdCut *cmd = new CmdCut (*this,
                              m_cmdMediator->document(),
                              pointIdentifiers);
    m_digitizeStateContext->appendNewCmd (m_cmdMediator,
                                          cmd);
  }
}
 
void MainWindow::slotEditDelete ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotEditDelete";
 
  // Copy command is sent to FittingWindow or GeometryWindow, or processed locally
  bool tableFittingIsActive, tableFittingIsCopyable;
  bool tableGeometryIsActive, tableGeometryIsCopyable;
  m_dockFittingWindow->getTableStatus (tableFittingIsActive, tableFittingIsCopyable); // Fitting window status
  m_dockGeometryWindow->getTableStatus (tableGeometryIsActive, tableGeometryIsCopyable); // Geometry window status
 
  if (tableFittingIsActive || tableGeometryIsActive) {
 
    // Cannot delete from fitting or geometry windows
 
  } else {
 
    // If this is a map, which has a scale bar with two axis points, then selection of just one axis point
    // for deletion should result in deletion of the other point also so this object will enforce that. Otherwise
    // this class has no effect below
    ScaleBarAxisPointsUnite scaleBarAxisPoints;
 
    // Process curve points in main window
    GraphicsItemsExtractor graphicsItemsExtractor;
    const QList<QGraphicsItem*> &items = m_scene->selectedItems();
    QStringList pointIdentifiers = scaleBarAxisPoints.unite (m_cmdMediator,
                                                             graphicsItemsExtractor.selectedPointIdentifiers (items));
 
    CmdDelete *cmd = new CmdDelete (*this,
                                    m_cmdMediator->document(),
                                    pointIdentifiers);
    m_digitizeStateContext->appendNewCmd (m_cmdMediator,
                                          cmd);
  }
}
 
void MainWindow::slotEditMenu ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotEditMenu";
 
  m_actionEditPasteAsNew->setEnabled (!QApplication::clipboard()->image().isNull());
  m_actionEditPasteAsNewAdvanced->setEnabled (!QApplication::clipboard()->image().isNull());
}
 
void MainWindow::slotEditPaste ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotEditPaste";
 
  QList<QPoint> points;
  QList<double> ordinals;
 
  MimePointsImport mimePointsImport;
  mimePointsImport.retrievePoints (m_transformation,
                                   points,
                                   ordinals);
 
  CmdAddPointsGraph *cmd = new CmdAddPointsGraph (*this,
                                                  m_cmdMediator->document(),
                                                  m_cmbCurve->currentText (),
                                                  points,
                                                  ordinals);
  m_digitizeStateContext->appendNewCmd (m_cmdMediator,
                                        cmd);
}
 
void MainWindow::slotEditPasteAsNew ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotEditPasteAsNew";
 
  filePaste (IMPORT_TYPE_SIMPLE);
}
 
void MainWindow::slotEditPasteAsNewAdvanced ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotEditPasteAsNewAdvanced";
 
  filePaste (IMPORT_TYPE_ADVANCED);
}
 
void MainWindow::slotFileClose()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotFileClose";
 
  if (maybeSave ()) {
 
    // Transition from defined to undefined. This must be after the clearing of the screen
    // since the axes checker screen item (and maybe others) must still exist
    m_transformationStateContext->triggerStateTransition(m_isGnuplot,
                                                         TRANSFORMATION_STATE_UNDEFINED,
                                                         *m_cmdMediator,
                                                         m_transformation,
                                                         selectedGraphCurve());
 
    // Transition to empty state so an inadvertent mouse press does not trigger, for example,
    // the creation of an axis point on a non-existent GraphicsScene (=crash)
    m_digitizeStateContext->requestImmediateStateTransition (m_cmdMediator,
                                                             DIGITIZE_STATE_EMPTY);
 
    // Deallocate fitted curve
    if (m_fittingCurve != nullptr) {
      m_scene->removeItem (m_fittingCurve);
      m_fittingCurve = nullptr;
    }
 
    // Remove screen objects
    m_scene->resetOnLoad ();
 
    // Remove background
    m_backgroundStateContext->close ();
 
    // Remove scroll bars if they exist
    m_scene->setSceneRect (QRectF (0, 0, 1, 1));
 
    // Remove stale data from fitting window
    m_dockFittingWindow->clear ();
 
    // Remove stale data from geometry window
    m_dockGeometryWindow->clear ();
 
    // Deallocate Document
    delete m_cmdMediator;
 
    // Remove file information
    m_cmdMediator = nullptr;
    m_currentFile = "";
    m_engaugeFile = "";
    setWindowTitle (engaugeWindowTitle ());
 
    m_gridLines.clear();
    updateControls();
  }
}
 
void MainWindow::slotFileExport ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotFileExport";
 
  if (m_transformation.transformIsDefined()) {
 
    MainDirectoryPersist directoryPersist;
    ExportToFile exportStrategy;
 
    QString fileName;
    if (m_isExportOnly) {
      fileName = fileNameForExportOnly ();
    } else {
 
      QString filter = QString ("%1;;%2;;All files (*.*)")
                       .arg (exportStrategy.filterCsv ())
                       .arg (exportStrategy.filterTsv ());
 
      // OSX sandbox requires, for the default, a non-empty filename
      QString defaultFileName = QString ("%1/%2.%3")
                                .arg (directoryPersist.getDirectoryExportSave().path ())
                                .arg (m_currentFile)
                                .arg (exportStrategy.fileExtensionCsv ());
      QFileDialog dlg;
      QString filterCsv = exportStrategy.filterCsv ();
 
      fileName = dlg.getSaveFileName (this,
                                      tr("Export"),
                                      defaultFileName,
                                      filter,
                                      &filterCsv);
    }
 
    if (!fileName.isEmpty ()) {
 
      directoryPersist.setDirectoryExportSaveFromFilename(fileName);
      fileExport(fileName,
                 exportStrategy);
    }
  } else {
    DlgRequiresTransform dlg ("Export");
    dlg.exec ();
  }
}
 
void MainWindow::slotFileImport ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotFileImport";
 
  fileImportWithPrompts (IMPORT_TYPE_SIMPLE);
}
 
void MainWindow::slotFileImportAdvanced ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotFileImportAdvanced";
 
  fileImportWithPrompts (IMPORT_TYPE_ADVANCED);
}
 
void MainWindow::slotFileImportDraggedImage(QImage image)
{  
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotFileImportDraggedImage";
 
  // No need to check return value from loadImage since there are no prompts that give the user a chance to cancel
  loadImage ("",
             image,
             IMPORT_TYPE_SIMPLE);
}
 
void MainWindow::slotFileImportDraggedImageUrl(QUrl url)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotFileImportDraggedImageUrl url=" << url.toString ().toLatin1 ().data ();
 
  // This is required for drag and drop from GraphicsView. This had an #ifdef
  // around it for NETWORKING but restored for drag and drop
  m_loadImageFromUrl->startLoadImage (url);
}
 
void MainWindow::slotFileImportImage(QString fileName, QImage image)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotFileImportImage fileName=" << fileName.toLatin1 ().data ();
 
  // No need to check return value from loadImage since there are no prompts that give the user a chance to cancel
  loadImage (fileName,
             image,
             IMPORT_TYPE_SIMPLE);
}
 
void MainWindow::slotFileImportImageReplace ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotFileImportImageReplace";
 
  fileImportWithPrompts (IMPORT_TYPE_IMAGE_REPLACE);
}
 
void MainWindow::slotFileOpen()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotFileOpen";
 
  if (maybeSave ()) {
 
    // Allow selection of files with strange suffixes in case the file extension was changed. Since
    // the default is the first filter, the wildcard filter is added afterwards (it is the off-nominal case)
    QString filter = QString ("%1 (*.%2);; All Files (*.*)")
                     .arg (ENGAUGE_FILENAME_DESCRIPTION)
                     .arg (ENGAUGE_FILENAME_EXTENSION);
 
    MainDirectoryPersist directoryPersist;
    QString fileName = QFileDialog::getOpenFileName (this,
                                                     tr("Open Document"),
                                                     directoryPersist.getDirectoryImportOpen ().path (),
                                                     filter);
    if (!fileName.isEmpty ()) {
 
      directoryPersist.setDirectoryImportOpenFromFilename (fileName);
      loadDocumentFile (fileName);
 
    }
  }
}
 
void MainWindow::slotFileOpenDraggedDigFile (QString fileName)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotFileOpenDraggedDigFile";
 
  loadDocumentFile (fileName);
}
 
void MainWindow::slotFilePrint()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotFilePrint";
 
  QPrinter printer (QPrinter::HighResolution);
  QPrintDialog dlg (&printer, this);
  if (dlg.exec() == QDialog::Accepted) {
    QPainter painter (&printer);
    m_view->render (&painter);
    painter.end();
  }
}
 
bool MainWindow::slotFileSave()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotFileSave";
 
  if (m_engaugeFile.isEmpty()) {
    return slotFileSaveAs();
  } else {
    return saveDocumentFile (m_engaugeFile);
  }
}
 
bool MainWindow::slotFileSaveAs()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotFileSaveAs";
 
  // Append engauge file extension if it is not already there
  QString filenameDefault = m_currentFile;
  if (!m_currentFile.endsWith (ENGAUGE_FILENAME_EXTENSION)) {
    filenameDefault = QString ("%1.%2")
                               .arg (m_currentFile)
                               .arg (ENGAUGE_FILENAME_EXTENSION);
  }
 
  if (!m_engaugeFile.isEmpty()) {
    filenameDefault = m_engaugeFile;
  }
 
  QString filterDigitizer = QString ("%1 (*.%2)")
                            .arg (ENGAUGE_FILENAME_DESCRIPTION)
                            .arg (ENGAUGE_FILENAME_EXTENSION);
  QString filterAll ("All files (*. *)");
 
  QStringList filters;
  filters << filterDigitizer;
  filters << filterAll;
 
  MainDirectoryPersist directoryPersist;
 
  QFileDialog dlg(this);
  dlg.setFileMode (QFileDialog::AnyFile);
  dlg.selectNameFilter (filterDigitizer);
  dlg.setNameFilters (filters);
#if !defined(OSX_DEBUG) && !defined(OSX_RELEASE)
  // Prevent hang in OSX
  dlg.setWindowModality(Qt::WindowModal);
#endif
  dlg.setAcceptMode(QFileDialog::AcceptSave);
  dlg.selectFile(filenameDefault);
  dlg.setDirectory (directoryPersist.getDirectoryExportSave ());
  if (dlg.exec()) {
 
    QStringList files = dlg.selectedFiles();
    directoryPersist.setDirectoryExportSaveFromFilename (files.at(0));
    return saveDocumentFile(files.at(0));
  }
 
  return false;
}
 
void MainWindow::slotFittingWindowClosed()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotFittingWindowClosed";
 
  m_actionViewFittingWindow->setChecked (false);
}
 
void MainWindow::slotFittingWindowCurveFit(FittingCurveCoefficients fittingCurveCoef,
                                           double xMin,
                                           double xMax,
                                           bool isLogXTheta,
                                           bool isLogYRadius)
{
  // Do not output elements in fittingCurveCoef here since that list may be empty
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotFittingWindowCurveFit"
                              << " order=" << fittingCurveCoef.size() - 1;
 
  if (m_fittingCurve != nullptr) {
    m_scene->removeItem (m_fittingCurve);
    delete m_fittingCurve;
  }
 
  m_fittingCurve = new FittingCurve (fittingCurveCoef,
                                     xMin,
                                     xMax,
                                     isLogXTheta,
                                     isLogYRadius,
                                     m_transformation);
  m_fittingCurve->setVisible (m_actionViewFittingWindow->isChecked ());
  m_scene->addItem (m_fittingCurve);
}
 
void MainWindow::slotGeometryWindowClosed()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotGeometryWindowClosed";
 
  m_actionViewGeometryWindow->setChecked (false);
}
 
void MainWindow::slotHelpAbout()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotHelpAbout";
 
  DlgAbout dlg (*this);
  dlg.exec ();
}
 
void MainWindow::slotHelpTutorial()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotHelpTutorial";
 
  m_tutorialDlg->show ();
  m_tutorialDlg->exec ();
}
 
void MainWindow::slotKeyPress (Qt::Key key,
                               bool atLeastOneSelectedItem)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotKeyPress"
                              << " key=" << QKeySequence (key).toString().toLatin1 ().data ()
                              << " atLeastOneSelectedItem=" << (atLeastOneSelectedItem ? "true" : "false");
 
  m_digitizeStateContext->handleKeyPress (m_cmdMediator,
                                          key,
                                          atLeastOneSelectedItem);
}
 
void MainWindow::slotLoadStartupFiles ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotLoadStartupFiles";
 
  ENGAUGE_ASSERT (m_loadStartupFiles.count() > 0);
 
  QString fileName = m_loadStartupFiles.front(); // Get next file name
  m_loadStartupFiles.pop_front(); // Remove next file name
 
  // Load next file into this instance of Engauge
  LoadFileInfo loadFileInfo;
  if (loadFileInfo.loadsAsDigFile(fileName)) {
 
    loadDocumentFile (fileName);
 
  } else {
 
    fileImport (fileName,
                IMPORT_TYPE_SIMPLE);
 
  }
 
  if (m_loadStartupFiles.count() > 0) {
 
    // Fork off another instance of this application to handle the remaining files recursively. New process
    // is detached so killing/terminating this process does not automatically kill the child process(es) also
    QProcess::startDetached (QCoreApplication::applicationFilePath(),
                             m_commandLineWithoutLoadStartupFiles + m_loadStartupFiles);
  }
}
 
void MainWindow::slotMouseMove (QPointF pos)
{
//  LOG4CPP_DEBUG_S ((*mainCat)) << "MainWindow::slotMouseMove pos=" << QPointFToString (pos).toLatin1 ().data ();
 
  // Ignore mouse moves before Document is loaded
  if (m_cmdMediator != nullptr) {
 
    // Get status bar coordinates
    QString coordsScreen, coordsGraph, resolutionGraph;
    m_transformation.coordTextForStatusBar (pos,
                                            coordsScreen,
                                            coordsGraph,
                                            resolutionGraph,
                                            modeMap ());
 
    // Update status bar coordinates
    m_statusBar->setCoordinates (coordsScreen,
                                 coordsGraph,
                                 resolutionGraph);
 
    // There used to be a call to updateGraphicsLinesToMatchGraphicsPoints here, but that resulted
    // in hundreds of gratuitous log messages as the cursor was moved around, and nothing important happened
 
    m_digitizeStateContext->handleMouseMove (m_cmdMediator,
                                             pos);
  }
}
 
void MainWindow::slotMousePress (QPointF pos)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotMousePress";
 
  m_scene->resetPositionHasChangedFlags();
 
  m_digitizeStateContext->handleMousePress (m_cmdMediator,
                                            pos);
}
 
void MainWindow::slotMouseRelease (QPointF pos)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotMouseRelease";
 
  if (pos.x() < 0 || pos.y() < 0) {
 
    // Cursor is outside the image so drop this event. However, call updateControls since this may be
    // a click-and-drag to select in which case the controls (especially Copy and Cut) reflect the new selection
    updateControls ();
 
  } else {
 
    // Cursor is within the image so process this as a normal mouse release
    m_digitizeStateContext->handleMouseRelease (m_cmdMediator,
                                                pos);
  }
}
 
void MainWindow::slotRecentFileAction ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotRecentFileAction";
 
  QAction *action = qobject_cast<QAction*>(sender ());
 
  if (action) {
    QString fileName = action->data().toString();
    loadDocumentFile (fileName);
  }
}
 
void MainWindow::slotRecentFileClear ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotRecentFileClear";
 
  QStringList emptyList;
 
  QSettings settings (SETTINGS_ENGAUGE, SETTINGS_DIGITIZER);
  settings.setValue (SETTINGS_RECENT_FILE_LIST,
                     emptyList);
 
  updateRecentFileList();
}
 
void MainWindow::slotRedoTextChanged (const QString &text)
{
  LOG4CPP_DEBUG_S ((*mainCat)) << "MainWindow::slotRedoTextChanged";
 
  QString completeText ("Redo");
  if (!text.isEmpty ()) {
    completeText += QString (" \"%1\"").arg (text);
  }
  m_actionEditRedo->setText (completeText);
}
 
void MainWindow::slotSettingsAxesChecker ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotSettingsAxesChecker";
 
  m_dlgSettingsAxesChecker->load (*m_cmdMediator);
  m_dlgSettingsAxesChecker->show ();
}
 
void MainWindow::slotSettingsColorFilter ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotSettingsColorFilter";
 
  m_dlgSettingsColorFilter->load (*m_cmdMediator);
  m_dlgSettingsColorFilter->show ();
}
 
void MainWindow::slotSettingsCoords ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotSettingsCoords";
 
  m_dlgSettingsCoords->load (*m_cmdMediator);
  m_dlgSettingsCoords->show ();
}
 
void MainWindow::slotSettingsCurveList ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotSettingsCurveList";
 
  m_dlgSettingsCurveList->load (*m_cmdMediator);
  m_dlgSettingsCurveList->show ();
}
 
void MainWindow::slotSettingsCurveProperties ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotSettingsCurveProperties";
 
  m_dlgSettingsCurveProperties->load (*m_cmdMediator);
  m_dlgSettingsCurveProperties->setCurveName (selectedGraphCurve ());
  m_dlgSettingsCurveProperties->show ();
}
 
void MainWindow::slotSettingsDigitizeCurve ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotSettingsDigitizeCurve";
 
  m_dlgSettingsDigitizeCurve->load (*m_cmdMediator);
  m_dlgSettingsDigitizeCurve->show ();
}
 
void MainWindow::slotSettingsExportFormat ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotSettingsExportFormat";
 
  if (transformIsDefined()) {
    m_dlgSettingsExportFormat->load (*m_cmdMediator);
    m_dlgSettingsExportFormat->show ();
  } else {
    DlgRequiresTransform dlg ("Export settings");
    dlg.exec();
  }
}
 
void MainWindow::slotSettingsGeneral ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotSettingsGeneral";
 
  m_dlgSettingsGeneral->load (*m_cmdMediator);
  m_dlgSettingsGeneral->show ();
}
 
void MainWindow::slotSettingsGridDisplay()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotSettingsGridDisplay";
 
  m_dlgSettingsGridDisplay->load (*m_cmdMediator);
  m_dlgSettingsGridDisplay->show ();
}
 
void MainWindow::slotSettingsGridRemoval ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotSettingsGridRemoval";
 
  m_dlgSettingsGridRemoval->load (*m_cmdMediator);
  m_dlgSettingsGridRemoval->show ();
}
 
void MainWindow::slotSettingsPointMatch ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotSettingsPointMatch";
 
  m_dlgSettingsPointMatch->load (*m_cmdMediator);
  m_dlgSettingsPointMatch->show ();
}
 
void MainWindow::slotSettingsSegments ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotSettingsSegments";
 
  m_dlgSettingsSegments->load (*m_cmdMediator);
  m_dlgSettingsSegments->show ();
}
 
void MainWindow::slotTableStatusChange ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotTableStatusChange";
 
  // This slot is called when either window in FittingWindow or GeometryWindow loses/gains focus. This is
  // so the Copy menu item can be updated
  updateControls ();
}
 
void MainWindow::slotSettingsMainWindow ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotSettingsMainWindow";
 
  m_dlgSettingsMainWindow->loadMainWindowModel (*m_cmdMediator,
                                                m_modelMainWindow);
  m_dlgSettingsMainWindow->show ();
}
 
void MainWindow::slotTimeoutRegressionErrorReport ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotTimeoutRegressionErrorReport"
                              << " cmdStackIndex=" << m_cmdMediator->index()
                              << " cmdStackCount=" << m_cmdMediator->count();
 
  if (m_cmdStackShadow->canRedo()) {
 
    // Always reset current directory before the command. This guarantees the upcoming redo step will work
    QDir::setCurrent (m_startupDirectory);
 
    m_cmdStackShadow->slotRedo();
 
    // Always reset current directory after the command. This guarantees the final export to file will work
    QDir::setCurrent (m_startupDirectory);
 
  } else {
 
#if !defined(OSX_DEBUG) && !defined(OSX_RELEASE)
    exportAllCoordinateSystemsAfterRegressionTests ();
#endif
 
    // Regression test has finished so exit. We unset the dirty flag so there is no prompt
    m_cmdMediator->setClean();
    close();
 
  }
}
 
void MainWindow::slotTimeoutRegressionFileCmdScript ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotTimeoutRegressionFileCmdScript";
 
  if (m_fileCmdScript->canRedo()) {
 
    // Always reset current directory before the command. This guarantees the upcoming redo step will work
    QDir::setCurrent (m_startupDirectory);
 
    m_fileCmdScript->redo(*this);
 
    // Always reset current directory after the command. This guarantees the final export to file will work
    QDir::setCurrent (m_startupDirectory);
 
  } else {
 
    // Script file might already have closed the Document so export only if last was not closed
    if (m_cmdMediator != nullptr) {
 
#if !defined(OSX_DEBUG) && !defined(OSX_RELEASE)
      exportAllCoordinateSystemsAfterRegressionTests ();
#endif
 
      // We unset the dirty flag so there is no "Save changes?" prompt
      m_cmdMediator->setClean();
 
    }
 
    // Regression test has finished so exit
    close();
 
  }
}
 
void MainWindow::slotUndoTextChanged (const QString &text)
{
  LOG4CPP_DEBUG_S ((*mainCat)) << "MainWindow::slotUndoTextChanged";
 
  QString completeText ("Undo");
  if (!text.isEmpty ()) {
    completeText += QString (" \"%1\"").arg (text);
  }
  m_actionEditUndo->setText (completeText);
}
 
void MainWindow::slotViewGridLines ()
{
  LOG4CPP_DEBUG_S ((*mainCat)) << "MainWindow::slotViewGridLines";
 
  updateGridLines ();
}
 
void MainWindow::slotViewGroupBackground(QAction *action)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotViewGroupBackground";
 
  // Set the combobox
  BackgroundImage backgroundImage;
  int indexBackground;
  if (action == m_actionViewBackgroundNone) {
    indexBackground = m_cmbBackground->findData (QVariant (BACKGROUND_IMAGE_NONE));
    backgroundImage = BACKGROUND_IMAGE_NONE;
  } else if (action == m_actionViewBackgroundOriginal) {
    indexBackground = m_cmbBackground->findData (QVariant (BACKGROUND_IMAGE_ORIGINAL));
    backgroundImage = BACKGROUND_IMAGE_ORIGINAL;
  } else if (action == m_actionViewBackgroundFiltered) {
    indexBackground = m_cmbBackground->findData (QVariant (BACKGROUND_IMAGE_FILTERED));
    backgroundImage = BACKGROUND_IMAGE_FILTERED;
  } else {
    ENGAUGE_ASSERT (false);
 
    // Defaults if assert is disabled so execution continues
    indexBackground = m_cmbBackground->findData (QVariant (BACKGROUND_IMAGE_ORIGINAL));
    backgroundImage = BACKGROUND_IMAGE_ORIGINAL;
  }
 
  m_cmbBackground->setCurrentIndex (indexBackground);
  m_backgroundStateContext->setBackgroundImage (backgroundImage);
}
 
void MainWindow::slotViewGroupCurves(QAction * /* action */)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotViewGroupCurves";
 
  updateViewedCurves ();
}
 
void MainWindow::slotViewGroupStatus(QAction *action)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotViewGroupStatus";
 
  ENGAUGE_CHECK_PTR (m_statusBar); // At startup, make sure status bar is already set up when View menu gets initialized
 
  if (action == m_actionStatusNever) {
    m_statusBar->setStatusBarMode(STATUS_BAR_MODE_NEVER);
  } else if (action == m_actionStatusTemporary) {
    m_statusBar->setStatusBarMode(STATUS_BAR_MODE_TEMPORARY);
  } else {
    m_statusBar->setStatusBarMode(STATUS_BAR_MODE_ALWAYS);
  }
}
 
void MainWindow::slotViewToolBarBackground ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotViewToolBarBackground";
 
  if (m_actionViewBackground->isChecked ()) {
    m_toolBackground->show();
  } else {
    m_toolBackground->hide();
  }
}
 
void MainWindow::slotViewToolBarChecklistGuide ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotViewToolBarChecklistGuide";
 
  if (m_actionViewChecklistGuide->isChecked ()) {
    m_dockChecklistGuide->show();
  } else {
    m_dockChecklistGuide->hide();
  }
}
 
void MainWindow::slotViewToolBarCoordSystem ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotViewToolBarCoordSystem";
 
  if (m_actionViewCoordSystem->isChecked ()) {
    m_toolCoordSystem->show();
  } else {
    m_toolCoordSystem->hide();
  }
}
 
void MainWindow::slotViewToolBarDigitize ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotViewToolBarDigitize";
 
  if (m_actionViewDigitize->isChecked ()) {
    m_toolDigitize->show();
  } else {
    m_toolDigitize->hide();
  }
}
 
void MainWindow::slotViewToolBarFittingWindow()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotViewToolBarFittingWindow";
 
  if (m_actionViewFittingWindow->isChecked()) {
    m_dockFittingWindow->show ();
    if (m_fittingCurve != nullptr) {
      m_fittingCurve->setVisible (true);
    }
  } else {
    m_dockFittingWindow->hide ();
    if (m_fittingCurve != nullptr) {
      m_fittingCurve->setVisible (false);
    }
  }
}
 
void MainWindow::slotViewToolBarGeometryWindow ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotViewToolBarGeometryWindow";
 
  if (m_actionViewGeometryWindow->isChecked ()) {
    m_dockGeometryWindow->show();
  } else {
    m_dockGeometryWindow->hide();
  }
}
 
void MainWindow::slotViewToolBarSettingsViews ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotViewToolBarSettingsViews";
 
  if (m_actionViewSettingsViews->isChecked ()) {
    m_toolSettingsViews->show();
  } else {
    m_toolSettingsViews->hide();
  }
}
 
void MainWindow::slotViewToolTips ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotViewToolTips";
 
  loadToolTips();
}
 
void MainWindow::slotViewZoom (int zoom)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotViewZoom";
 
  // Update zoom controls and apply the zoom factor
  ZoomFactor zoomFactor = static_cast<ZoomFactor> (zoom);
  m_zoomMapToAction [zoomFactor]->setChecked (true);
  slotViewZoomFactor (static_cast<ZoomFactor> (zoom));
}
 
void MainWindow::slotViewZoomFactor (ZoomFactor zoomFactor)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotViewZoomFactor";
 
  if (zoomFactor == ZOOM_FILL) {
      m_backgroundStateContext->fitInView (*m_view);
  } else {
 
    ZoomTransition zoomTransition;    
    double factor = zoomTransition.mapToFactor (zoomFactor);
 
    QTransform transform;
    transform.scale (factor, factor);
    m_view->setTransform (transform);
  }
 
  emit signalZoom(zoomFactor);
}
 
void MainWindow::slotViewZoomFactorInt (int zoom)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotViewZoomFactorInt";
 
  slotViewZoomFactor (static_cast<ZoomFactor> (zoom));
}
 
void MainWindow::slotViewZoomIn ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotViewZoomIn";
 
  ZoomTransition zoomTransition;
  ZoomFactor zoomFactorNew = zoomTransition.zoomIn (currentZoomFactor (),
                                                    m_view->transform ().m11 (),
                                                    m_view->transform ().m22 (),
                                                    m_actionZoomFill->isChecked ());
  setNonFillZoomFactor (zoomFactorNew);
}
 
 
void MainWindow::slotViewZoomInFromWheelEvent ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotViewZoomInFromWheelEvent";
 
  if ((m_modelMainWindow.zoomControl() == ZOOM_CONTROL_MENU_WHEEL) ||
      (m_modelMainWindow.zoomControl() == ZOOM_CONTROL_MENU_WHEEL_PLUSMINUS)) {
 
    // Anchor the zoom to the cursor position
    m_view->setTransformationAnchor(QGraphicsView::AnchorUnderMouse);
 
    // Forward this event
    slotViewZoomIn ();
 
    m_view->setTransformationAnchor(QGraphicsView::NoAnchor);
  }
}
 
void MainWindow::slotViewZoomOut ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotViewZoomOut";
 
  // Try to zoom out
  ZoomTransition zoomTransition;
  ZoomFactor zoomFactorNew = zoomTransition.zoomOut (currentZoomFactor (),
                                                     m_view->transform ().m11 (),
                                                     m_view->transform ().m22 (),
                                                     m_actionZoomFill->isChecked ());
  setNonFillZoomFactor (zoomFactorNew);
}
 
void MainWindow::slotViewZoomOutFromWheelEvent ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::slotViewZoomOutFromWheelEvent";
 
  if ((m_modelMainWindow.zoomControl() == ZOOM_CONTROL_MENU_WHEEL) ||
      (m_modelMainWindow.zoomControl() == ZOOM_CONTROL_MENU_WHEEL_PLUSMINUS)) {
 
    // Anchor the zoom to the cursor position
    m_view->setTransformationAnchor(QGraphicsView::AnchorUnderMouse);
 
    // Forward this event
    slotViewZoomOut ();
 
    m_view->setTransformationAnchor(QGraphicsView::NoAnchor);
  }
}
 
void MainWindow::startRegressionDropTest (const QStringList &loadStartupFiles)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::startRegressionTestErrorReport";
 
  // Regression testing of drag and drop has some constraints:
  // 1) Need graphics window (GraphicsView) or else its events will not work. This is why
  //    drag and drop testing is not done as one of the cli tests, which do not show the gui
  // 2) Drag and drop by itself does not produce the csv file, so this code will output theupdateTransformFromMatrices
  //    x,y dimensions of the imported image instead of a normal csv file
  connect (this, SIGNAL (signalDropRegression (QString)), m_view, SLOT (slotDropRegression (QString)));
 
  for (int counter = 0; counter < loadStartupFiles.size (); counter++) {
    QString filenameDrop = loadStartupFiles.at (counter);
 
    // Trigger drop part of drag and drop operation
    emit signalDropRegression (filenameDrop);
 
    QSize siz = m_view->size();
 
    QString filenameCsv;
    if (filenameDrop.startsWith ("http")) {
 
      // Internet url is not useful for computing local file name. Only regression tests reach this branch
      // so filename is hardcoded
      filenameCsv = "../test/drag_and_drop_http.csv_actual_1";
 
    } else {
 
      // Local file
      filenameCsv = QString ("%1_%2")
        .arg (exportRegressionFilenameFromInputFilename (filenameDrop))
        .arg (counter + 1);
    }
 
    QFile file (filenameCsv);
    file.open (QIODevice::WriteOnly);
    QTextStream str (&file);
    str << siz.width() << "x" << siz.height() << "\n";
    file.close ();
  }
 
  exit (0);
}
 
void MainWindow::startRegressionTestErrorReport(const QString &regressionInputFile)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::startRegressionTestErrorReport";
 
  // In order for point-deleting commands to work (CmdCut, CmdDelete) in the regression tests, we need to
  // reset the Point identifier index here:
  // 1) after loading of the file which has increased the index value to greater than 0
  // 2) before running any commands since those commands implicitly assume the index is zero
  Point::setIdentifierIndex(0);
 
  // Save output/export file name
  m_regressionFile = exportRegressionFilenameFromInputFilename (regressionInputFile);
 
  m_timerRegressionErrorReport = new QTimer();
  m_timerRegressionErrorReport->setSingleShot(false);
  connect (m_timerRegressionErrorReport, SIGNAL (timeout()), this, SLOT (slotTimeoutRegressionErrorReport()));
 
  m_timerRegressionErrorReport->start(REGRESSION_INTERVAL);
}
 
void MainWindow::startRegressionTestFileCmdScript()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::startRegressionTestFileCmdScript";
 
  m_timerRegressionFileCmdScript = new QTimer();
  m_timerRegressionFileCmdScript->setSingleShot(false);
  connect (m_timerRegressionFileCmdScript, SIGNAL (timeout()), this, SLOT (slotTimeoutRegressionFileCmdScript()));
 
  m_timerRegressionFileCmdScript->start(REGRESSION_INTERVAL);
}
 
Transformation MainWindow::transformation() const
{
  return m_transformation;
}
 
bool MainWindow::transformIsDefined() const
{
  return m_transformation.transformIsDefined();
}
 
void MainWindow::updateAfterCommand ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::updateAfterCommand";
 
  ENGAUGE_CHECK_PTR (m_cmdMediator);
 
  // Update transformation stuff, including the graph coordinates of every point in the Document, so coordinates in
  // status bar are up to date. Point coordinates in Document are also updated
  updateAfterCommandStatusBarCoords ();
 
  updateHighlightOpacity ();
 
  // Update graphics. Effectively, these steps do very little (just needed for highlight opacity)
  m_digitizeStateContext->updateAfterPointAddition (); // May or may not be needed due to point addition
 
  updateControls ();
  updateChecklistGuide ();
  updateFittingWindow ();
  updateGeometryWindow();
 
  // Final actions at the end of a redo/undo are:
  // 1) checkpoint the Document and GraphicsScene to log files so proper state can be verified
  // 2) run sanity check on state
  writeCheckpointToLogFile ();
  DocumentScrub docScrub;
  docScrub.check (*this,
                  m_cmdMediator->document ());
 
  // Since focus may have drifted over to Geometry Window or some other control we se focus on the GraphicsView
  // so the cursor is appropriate for the current state (otherwise it often ends up as default arrow)
  m_view->setFocus ();
}
 
void MainWindow::updateAfterCommandStatusBarCoords ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::updateAfterCommandStatusBarCoords";
 
  // For some reason, mapFromGlobal(QCursor::pos) differs from event->pos by a little bit. We must compensate for
  // this so cursor coordinates in status bar match the DlgEditPointAxis inputs initially. After the mouse moves
  // the problem disappears since event->pos is available and QCursor::pos is no longer needed
  const QPoint HACK_SO_GRAPH_COORDINATE_MATCHES_INPUT (1, 1);
 
  Transformation m_transformationBefore (m_transformation);
 
  updateTransformationAndItsDependencies();
 
  // Trigger state transitions for transformation if appropriate
  if (!m_transformationBefore.transformIsDefined() && m_transformation.transformIsDefined()) {
 
    // Transition from undefined to defined
    m_transformationStateContext->triggerStateTransition(m_isGnuplot,
                                                         TRANSFORMATION_STATE_DEFINED,
                                                         *m_cmdMediator,
                                                         m_transformation,
                                                         selectedGraphCurve());
 
  } else if (m_transformationBefore.transformIsDefined() && !m_transformation.transformIsDefined()) {
 
    // Transition from defined to undefined
    m_transformationStateContext->triggerStateTransition(m_isGnuplot,
                                                         TRANSFORMATION_STATE_UNDEFINED,
                                                         *m_cmdMediator,
                                                         m_transformation,
                                                         selectedGraphCurve());
 
  } else if (m_transformation.transformIsDefined() && (m_transformationBefore != m_transformation)) {
 
    // There was not a define/undefined or undefined/defined transition, but the transformation changed so we
    // need to update the Checker
    m_transformationStateContext->updateAxesChecker(*m_cmdMediator,
                                                    m_transformation);
 
  }
 
  QPoint posLocal = m_view->mapFromGlobal (QCursor::pos ()) - HACK_SO_GRAPH_COORDINATE_MATCHES_INPUT;
  QPointF posScreen = m_view->mapToScene (posLocal);
 
  slotMouseMove (posScreen); // Update the status bar coordinates to reflect the newly updated transformation
}
 
void MainWindow::updateAfterMouseRelease ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::updateAfterMouseRelease";
 
  updateControls ();
}
 
void MainWindow::updateChecklistGuide ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::updateChecklistGuide";
 
  m_dockChecklistGuide->update (*m_cmdMediator,
                                m_isDocumentExported);
}
 
void MainWindow::updateControls ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::updateControls"
                              << " selectedItems=" << m_scene->selectedItems().count();
 
  m_cmbBackground->setEnabled (!m_currentFile.isEmpty ());
 
  m_actionImportImageReplace->setEnabled (m_cmdMediator != nullptr);
#if !defined(OSX_DEBUG) && !defined(OSX_RELEASE)
  m_menuFileOpenRecent->setEnabled ((m_actionRecentFiles.count () > 0) &&
                                    (m_actionRecentFiles.at(0)->isVisible ())); // Need at least one visible recent file entry
#endif
  m_actionClose->setEnabled (!m_currentFile.isEmpty ());
  m_actionSave->setEnabled (!m_currentFile.isEmpty ());
  m_actionSaveAs->setEnabled (!m_currentFile.isEmpty ());
  m_actionExport->setEnabled (!m_currentFile.isEmpty ());
  m_actionPrint->setEnabled (!m_currentFile.isEmpty ());
 
  if (m_cmdMediator == nullptr) {
    m_actionEditUndo->setEnabled (false);
    m_actionEditRedo->setEnabled (false);
  } else {
    m_actionEditUndo->setEnabled (m_cmdMediator->canUndo ());
    m_actionEditRedo->setEnabled (m_cmdMediator->canRedo () || m_cmdStackShadow->canRedo ());
  }
  bool tableFittingIsActive, tableFittingIsCopyable;
  bool tableGeometryIsActive, tableGeometryIsCopyable;
  m_dockFittingWindow->getTableStatus (tableFittingIsActive, tableFittingIsCopyable); // Fitting window status
  m_dockGeometryWindow->getTableStatus (tableGeometryIsActive, tableGeometryIsCopyable); // Geometry window status
  m_actionEditCut->setEnabled (!tableFittingIsActive &&
                               !tableGeometryIsActive &&
                               m_scene->selectedItems().count () > 0);
  m_actionEditCopy->setEnabled ((!tableFittingIsActive && !tableGeometryIsActive && m_scene->selectedItems().count () > 0) ||
                                (tableFittingIsActive && tableFittingIsCopyable) ||
                                (tableGeometryIsActive && tableGeometryIsCopyable));
  m_actionEditPaste->setEnabled (m_digitizeStateContext->canPaste (m_transformation,
                                                                   m_view->size ()));
  m_actionEditDelete->setEnabled (!tableFittingIsActive &&
                                  !tableGeometryIsActive &&
                                  m_scene->selectedItems().count () > 0);
  // m_actionEditPasteAsNew and m_actionEditPasteAsNewAdvanced are updated when m_menuEdit is about to be shown
 
  m_actionDigitizeAxis->setEnabled (modeGraph ());
  m_actionDigitizeScale->setEnabled (modeMap ());
  m_actionDigitizeCurve ->setEnabled (!m_currentFile.isEmpty ());
  m_actionDigitizePointMatch->setEnabled (!m_currentFile.isEmpty ());
  m_actionDigitizeColorPicker->setEnabled (!m_currentFile.isEmpty ());
  m_actionDigitizeSegment->setEnabled (!m_currentFile.isEmpty ());
  m_actionDigitizeSelect->setEnabled (!m_currentFile.isEmpty ());
  if (m_transformation.transformIsDefined()) {
    m_actionViewGridLines->setEnabled (true);
  } else {
    m_actionViewGridLines->setEnabled (false);
    m_actionViewGridLines->setChecked (false);
  }
  m_actionViewBackground->setEnabled (!m_currentFile.isEmpty());
  m_actionViewChecklistGuide->setEnabled (!m_dockChecklistGuide->browserIsEmpty());
  m_actionViewDigitize->setEnabled (!m_currentFile.isEmpty ());
  m_actionViewSettingsViews->setEnabled (!m_currentFile.isEmpty ());
 
  m_actionSettingsCoords->setEnabled (!m_currentFile.isEmpty ());
  m_actionSettingsCurveList->setEnabled (!m_currentFile.isEmpty ());
  m_actionSettingsCurveProperties->setEnabled (!m_currentFile.isEmpty ());
  m_actionSettingsDigitizeCurve->setEnabled (!m_currentFile.isEmpty ());
  m_actionSettingsExport->setEnabled (!m_currentFile.isEmpty ());
  m_actionSettingsColorFilter->setEnabled (!m_currentFile.isEmpty ());
  m_actionSettingsAxesChecker->setEnabled (!m_currentFile.isEmpty ());
  m_actionSettingsGridDisplay->setEnabled (!m_currentFile.isEmpty () && m_transformation.transformIsDefined());
  m_actionSettingsGridRemoval->setEnabled (!m_currentFile.isEmpty ());
  m_actionSettingsPointMatch->setEnabled (!m_currentFile.isEmpty ());
  m_actionSettingsSegments->setEnabled (!m_currentFile.isEmpty ());
  m_actionSettingsGeneral->setEnabled (!m_currentFile.isEmpty ());
 
  m_groupBackground->setEnabled (!m_currentFile.isEmpty ());
  m_groupCurves->setEnabled (!m_currentFile.isEmpty ());
  m_groupZoom->setEnabled (!m_currentFile.isEmpty ());
 
  m_actionZoomIn->setEnabled (!m_currentFile.isEmpty ()); // Disable at startup so shortcut has no effect
  m_actionZoomOut->setEnabled (!m_currentFile.isEmpty ()); // Disable at startup so shortcut has no effect
}
 
void MainWindow::updateCoordSystem(CoordSystemIndex coordSystemIndex)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::updateCoordSystem";
 
  // Set current curve in the Document and in the MainWindow combobox together so they are in sync. Setting
  // the selected curve prevents a crash in updateTransformationAndItsDependencies
  m_cmdMediator->document().setCoordSystemIndex (coordSystemIndex);
  loadCurveListFromCmdMediator ();
 
  updateTransformationAndItsDependencies(); // Transformation state may have changed
  updateSettingsAxesChecker(m_cmdMediator->document().modelAxesChecker()); // Axes checker dependes on transformation state
 
  // Nice trick for showing that a new coordinate system is in effect is to show the axes checker
  m_transformationStateContext->updateAxesChecker (*m_cmdMediator,
                                                   m_transformation);
 
  updateAfterCommand();
}
 
void MainWindow::updateDigitizeStateIfSoftwareTriggered (DigitizeState digitizeState)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::updateDigitizeStateIfSoftwareTriggered";
 
  switch (digitizeState) {
    case DIGITIZE_STATE_AXIS:
      m_actionDigitizeAxis->setChecked(true);
      slotDigitizeAxis(); // Call the slot that the setChecked call fails to trigger
      break;
 
    case DIGITIZE_STATE_COLOR_PICKER:
      m_actionDigitizeColorPicker->setChecked(true);
      slotDigitizeColorPicker(); // Call the slot that the setChecked call fails to trigger
      break;
 
    case DIGITIZE_STATE_CURVE:
      m_actionDigitizeCurve->setChecked(true);
      slotDigitizeCurve(); // Call the slot that the setChecked call fails to trigger
      break;
 
    case DIGITIZE_STATE_EMPTY:
      break;
 
    case DIGITIZE_STATE_POINT_MATCH:
      m_actionDigitizePointMatch->setChecked(true);
      slotDigitizePointMatch(); // Call the slot that the setChecked call fails to trigger
      break;
 
    case DIGITIZE_STATE_SCALE:
      m_actionDigitizeScale->setChecked(true);
      slotDigitizeScale(); // Call the slot that the setChecked call fails to trigger
      break;
 
    case DIGITIZE_STATE_SEGMENT:
      m_actionDigitizeSegment->setChecked(true);
       slotDigitizeSegment(); // Call the slot that the setChecked call fails to trigger
      break;
 
    case DIGITIZE_STATE_SELECT:
      m_actionDigitizeSelect->setChecked(true);
      slotDigitizeSelect(); // Call the slot that the setChecked call fails to trigger
      break;
 
    default:
      LOG4CPP_ERROR_S ((*mainCat)) << "MainWindow::updateDigitizeStateIfSoftwareTriggered";
      break;
  }
}
 
void MainWindow::updateFittingWindow ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::updateFittingWindow";
 
  if (m_cmdMediator != nullptr &&
      m_cmbCurve != nullptr) {
 
    // Update fitting window
    m_dockFittingWindow->update (*m_cmdMediator,
                                 m_modelMainWindow,
                                 m_cmbCurve->currentText (),
                                 m_transformation);
  }
}
 
void MainWindow::updateGeometryWindow ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::updateGeometryWindow";
 
  if (m_cmdMediator != nullptr &&
      m_cmbCurve != nullptr) {
 
    // Update geometry window
    m_dockGeometryWindow->update (*m_cmdMediator,
                                  m_modelMainWindow,
                                  m_cmbCurve->currentText (),
                                  m_transformation);
  }
}
 
void MainWindow::updateGraphicsLinesToMatchGraphicsPoints()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::updateGraphicsLinesToMatchGraphicsPoints";
 
  m_scene->updateGraphicsLinesToMatchGraphicsPoints(m_cmdMediator->document().modelCurveStyles(),
                                                    m_transformation);
}
 
void MainWindow::updateGridLines ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::updateGridLines";
 
  // Remove old grid lines
  m_gridLines.clear ();
 
  // Create new grid lines
  GridLineFactory factory (*m_scene,
                           m_cmdMediator->document().modelCoords());
  factory.createGridLinesForEvenlySpacedGrid (m_cmdMediator->document().modelGridDisplay(),
                                              m_cmdMediator->document(),
                                              m_modelMainWindow,
                                              m_transformation,
                                              m_gridLines);
 
  m_gridLines.setVisible (m_actionViewGridLines->isChecked());
}
 
void MainWindow::updateHighlightOpacity ()
{
  if (m_cmdMediator != nullptr) {
 
    // Update the QGraphicsScene with the populated Curves. This requires the points in the Document to be already updated
    // by updateAfterCommandStatusBarCoords
    m_scene->updateAfterCommand (*m_cmdMediator,
                                 m_modelMainWindow.highlightOpacity(),
                                 m_dockGeometryWindow,
                                 m_transformation);
  }
}
 
void MainWindow::updateRecentFileList()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::updateRecentFileList";
 
#if !defined(OSX_DEBUG) && !defined(OSX_RELEASE)
  QSettings settings (SETTINGS_ENGAUGE, SETTINGS_DIGITIZER);
  QStringList recentFilePaths = settings.value(SETTINGS_RECENT_FILE_LIST).toStringList();
 
  // Determine the desired size of the path list
  unsigned int count = unsigned (recentFilePaths.size());
  if (count > MAX_RECENT_FILE_LIST_SIZE) {
    count = MAX_RECENT_FILE_LIST_SIZE;
  }
 
  // Add visible entries
  int i;
  for (i = 0; i < signed (count); i++) {
    QString strippedName = QFileInfo (recentFilePaths.at(i)).fileName();
    m_actionRecentFiles.at (i)->setText (strippedName);
    m_actionRecentFiles.at (i)->setData (recentFilePaths.at (i));
    m_actionRecentFiles.at (i)->setVisible (true);
  }
 
  // Hide any extra entries
  for (i = signed (count); i < signed (MAX_RECENT_FILE_LIST_SIZE); i++) {
    m_actionRecentFiles.at (i)->setVisible (false);
  }
#endif
}
 
void MainWindow::updateSettingsAxesChecker(const DocumentModelAxesChecker &modelAxesChecker)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::updateSettingsAxesChecker";
 
  m_cmdMediator->document().setModelAxesChecker(modelAxesChecker);
  if (m_transformation.transformIsDefined()) {
    m_transformationStateContext->triggerStateTransition(m_isGnuplot,
                                                         TRANSFORMATION_STATE_DEFINED,
                                                         *m_cmdMediator,
                                                         m_transformation,
                                                         m_cmbCurve->currentText());
  } else {
    m_transformationStateContext->triggerStateTransition(m_isGnuplot,
                                                         TRANSFORMATION_STATE_UNDEFINED,
                                                         *m_cmdMediator,
                                                         m_transformation,
                                                         m_cmbCurve->currentText());
  }
}
 
void MainWindow::updateSettingsColorFilter(const DocumentModelColorFilter &modelColorFilter)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::updateSettingsColorFilter";
 
  m_cmdMediator->document().setModelColorFilter(modelColorFilter);
  m_backgroundStateContext->updateColorFilter (m_isGnuplot,
                                               m_transformation,
                                               m_cmdMediator->document().modelGridRemoval(),
                                               modelColorFilter,
                                               m_cmbCurve->currentText());
  m_digitizeStateContext->handleCurveChange (m_cmdMediator);
  updateViewsOfSettings();
}
 
void MainWindow::updateSettingsCoords(const DocumentModelCoords &modelCoords)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::updateSettingsCoords";
 
  m_cmdMediator->document().setModelCoords(modelCoords);
}
 
void MainWindow::updateSettingsCurveList (const CurvesGraphs &curvesGraphs)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::updateSettingsCurveList";
 
  m_cmdMediator->document().setCurvesGraphs (curvesGraphs);
  loadCurveListFromCmdMediator();
  updateViewsOfSettings();
}
 
void MainWindow::updateSettingsCurveStyles(const CurveStyles &modelCurveStyles)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::updateSettingsCurveStyles";
 
  m_scene->updateCurveStyles(modelCurveStyles);
  m_cmdMediator->document().setModelCurveStyles(modelCurveStyles);
  updateViewsOfSettings();
}
 
void MainWindow::updateSettingsDigitizeCurve(const DocumentModelDigitizeCurve &modelDigitizeCurve)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::updateSettingsDigitizeCurve";
 
  m_cmdMediator->document().setModelDigitizeCurve(modelDigitizeCurve);
  m_digitizeStateContext->updateModelDigitizeCurve (m_cmdMediator,
                                                    modelDigitizeCurve);
}
 
void MainWindow::updateSettingsExportFormat(const DocumentModelExportFormat &modelExport)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::updateSettingsExportFormat";
 
  m_cmdMediator->document().setModelExport (modelExport);
}
 
void MainWindow::updateSettingsGeneral(const DocumentModelGeneral &modelGeneral)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::updateSettingsGeneral";
 
  m_cmdMediator->document().setModelGeneral(modelGeneral);
}
 
void MainWindow::updateSettingsGridDisplay(const DocumentModelGridDisplay &modelGridDisplay)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::updateSettingsGridDisplay";
 
  m_cmdMediator->document().setModelGridDisplay(modelGridDisplay);
  updateGridLines ();
}
 
void MainWindow::updateSettingsGridRemoval(const DocumentModelGridRemoval &modelGridRemoval)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::updateSettingsGridRemoval";
 
  m_cmdMediator->document().setModelGridRemoval(modelGridRemoval);
}
 
void MainWindow::updateSettingsMainWindow()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::updateSettingsMainWindow";
 
  if (m_modelMainWindow.zoomControl() == ZOOM_CONTROL_MENU_ONLY ||
      m_modelMainWindow.zoomControl() == ZOOM_CONTROL_MENU_WHEEL) {
 
    m_actionZoomIn->setShortcut (tr (""));
    m_actionZoomOut->setShortcut (tr (""));
 
  } else {
 
    m_actionZoomIn->setShortcut (tr ("+"));
    m_actionZoomOut->setShortcut (tr ("-"));
 
  }
 
  if ((m_scene != nullptr) &&
      (m_cmdMediator != nullptr)) {
    m_scene->updateCurveStyles(m_cmdMediator->document().modelCurveStyles());
  }
 
  updateHighlightOpacity();
  updateWindowTitle();
  updateFittingWindow(); // Forward the drag and drop choice
  updateGeometryWindow(); // Forward the drag and drop choice
}
 
void MainWindow::updateSettingsMainWindow(const MainWindowModel &modelMainWindow)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::updateSettingsMainWindow";
 
  m_modelMainWindow = modelMainWindow;
  updateSettingsMainWindow();
}
 
void MainWindow::updateSettingsPointMatch(const DocumentModelPointMatch &modelPointMatch)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::updateSettingsPointMatch";
 
  m_cmdMediator->document().setModelPointMatch(modelPointMatch);
}
 
void MainWindow::updateSettingsSegments(const DocumentModelSegments &modelSegments)
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::updateSettingsSegments";
 
  m_cmdMediator->document().setModelSegments(modelSegments);
  m_digitizeStateContext->updateModelSegments(modelSegments);
}
 
void MainWindow::updateSmallDialogs ()
{
  m_dlgSettingsAxesChecker->setSmallDialogs (m_modelMainWindow.smallDialogs ());
  m_dlgSettingsColorFilter->setSmallDialogs (m_modelMainWindow.smallDialogs ());
  m_dlgSettingsCoords->setSmallDialogs (m_modelMainWindow.smallDialogs ());
  m_dlgSettingsCurveList->setSmallDialogs (m_modelMainWindow.smallDialogs ());
  m_dlgSettingsCurveProperties->setSmallDialogs (m_modelMainWindow.smallDialogs ());
  m_dlgSettingsDigitizeCurve->setSmallDialogs (m_modelMainWindow.smallDialogs ());
  m_dlgSettingsExportFormat->setSmallDialogs (m_modelMainWindow.smallDialogs ());
  m_dlgSettingsGeneral->setSmallDialogs (m_modelMainWindow.smallDialogs ());
  m_dlgSettingsGridDisplay->setSmallDialogs (m_modelMainWindow.smallDialogs ());
  m_dlgSettingsGridRemoval->setSmallDialogs (m_modelMainWindow.smallDialogs ());
  m_dlgSettingsMainWindow->setSmallDialogs (m_modelMainWindow.smallDialogs ());
  m_dlgSettingsPointMatch->setSmallDialogs (m_modelMainWindow.smallDialogs ());
  m_dlgSettingsSegments->setSmallDialogs (m_modelMainWindow.smallDialogs ());
}
 
void MainWindow::updateTransformationAndItsDependencies()
{
  m_transformation.update (!m_currentFile.isEmpty (),
                           *m_cmdMediator,
                           m_modelMainWindow);
 
  // Grid removal is affected by new transformation above
  m_backgroundStateContext->setCurveSelected (m_isGnuplot,
                                              m_transformation,
                                              m_cmdMediator->document().modelGridRemoval(),
                                              m_cmdMediator->document().modelColorFilter(),
                                              m_cmbCurve->currentText ());
  
  // Grid display is also affected by new transformation above, if there was a transition into defined state
  // in which case that transition triggered the initialization of the grid display parameters
  updateGridLines();
}
 
void MainWindow::updateViewedCurves ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::updateViewedCurves";
 
  if (m_actionViewCurvesAll->isChecked ()) {
 
    m_scene->showCurves (true, true);
 
  } else if (m_actionViewCurvesSelected->isChecked ()) {
 
    m_scene->showCurves (true, false, selectedGraphCurve ());
 
  } else if (m_actionViewCurvesNone->isChecked ()) {
 
    m_scene->showCurves (false);
 
  } else {
    ENGAUGE_ASSERT (false);
  }
}
 
void MainWindow::updateViewsOfSettings ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::updateViewsOfSettings";
 
  QString activeCurve = m_digitizeStateContext->activeCurve ();
 
  updateViewsOfSettings (activeCurve);
}
 
void MainWindow::updateViewsOfSettings (const QString &activeCurve)
{
  if (activeCurve.isEmpty ()) {
 
    m_viewPointStyle->unsetPointStyle ();
    m_viewSegmentFilter->unsetColorFilterSettings ();
 
 
  } else {
 
    PointStyle pointStyle = m_cmdMediator->document().modelCurveStyles().curveStyle(activeCurve).pointStyle();
    m_viewPointStyle->setPointStyle (pointStyle);
 
    ColorFilterSettings colorFilterSettings = m_cmdMediator->document().modelColorFilter().colorFilterSettings(activeCurve);
    m_viewSegmentFilter->setColorFilterSettings (colorFilterSettings,
                                                 m_cmdMediator->pixmap ());
 
  }
}
 
void MainWindow::updateWindowTitle ()
{
  LOG4CPP_INFO_S ((*mainCat)) << "MainWindow::updateWindowTitle";
 
  const QString PLACEHOLDER ("[*]");
 
  QString title = QString ("%1 %2")
                           .arg (tr ("Engauge Digitizer"))
                           .arg (VERSION_NUMBER);
 
  QString fileNameMaybeStripped;
  if (!m_currentFileWithPathAndFileExtension.isEmpty()) {
 
    QFileInfo fileInfo (m_currentFileWithPathAndFileExtension);
 
    switch (m_modelMainWindow.mainTitleBarFormat())
    {
      case MAIN_TITLE_BAR_FORMAT_NO_PATH:
        // Remove file extension and path for "clean look". We use completeBaseName rather than baseName so
        // files with multiple periods are handled correctly - all but last suffix gets kept
        fileNameMaybeStripped = fileInfo.completeBaseName();
        break;
 
      case MAIN_TITLE_BAR_FORMAT_PATH:
        fileNameMaybeStripped = m_currentFileWithPathAndFileExtension;
        break;
    }
 
    title += QString (": %1")
             .arg (fileNameMaybeStripped);
  }
 
  // To prevent "QWidget::setWindowModified: The window title does not contain a [*] placeholder" warnings,
  // we always append a placeholder
  title += PLACEHOLDER;
 
  setWindowTitle (title);
}
 
GraphicsView &MainWindow::view ()
{
  ENGAUGE_CHECK_PTR (m_view);
  return *m_view;
}
 
const GraphicsView &MainWindow::view () const
{
  ENGAUGE_CHECK_PTR (m_view);
  return *m_view;
}
 
void MainWindow::writeCheckpointToLogFile ()
{
  // Document
  QString checkpointDoc;
  QTextStream strDoc (&checkpointDoc);
  m_cmdMediator->document().printStream(INDENTATION_PAST_TIMESTAMP,
                                        strDoc);
 
  // Scene
  QString checkpointScene;
  QTextStream strScene (&checkpointScene);
  m_scene->printStream (INDENTATION_PAST_TIMESTAMP,
                        strScene);
 
  // Skip slow string manipulation if BEFORE call to LOG4CPP_DEBUG_S
  if (mainCat->getPriority() == log4cpp::Priority::DEBUG) {
 
    LOG4CPP_DEBUG_S ((*mainCat)) << "MainWindow::writeCheckpointToLogFile\n"
                                 << "--------------DOCUMENT CHECKPOINT START----------" << "\n"
                                 << checkpointDoc.toLatin1().data()
                                 << "---------------DOCUMENT CHECKPOINT END-----------" << "\n"
                                 << "----------------SCENE CHECKPOINT START-----------" << "\n"
                                 << checkpointScene.toLatin1().data()
                                 << "-----------------SCENE CHECKPOINT END------------" ;
  }
}