Stokhos_StieltjesUnitTest.cpp

Go to the documentation of this file.

// $Id$ 
// $Source$ 
// @HEADER
// ***********************************************************************
// 
//                           Stokhos Package
//                 Copyright (2009) Sandia Corporation
// 
// Under terms of Contract DE-AC04-94AL85000, there is a non-exclusive
// license for use of this work by or on behalf of the U.S. Government.
// 
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
// 1. Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// 2. Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
//
// 3. Neither the name of the Corporation nor the names of the
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY SANDIA CORPORATION "AS IS" AND ANY
// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
// PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL SANDIA CORPORATION OR THE
// CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
// Questions? Contact Eric T. Phipps (etphipp@sandia.gov).
// 
// ***********************************************************************
// @HEADER
 
#include "Teuchos_UnitTestHarness.hpp"
#include "Teuchos_TestingHelpers.hpp"
#include "Teuchos_UnitTestRepository.hpp"
#include "Teuchos_GlobalMPISession.hpp"
 
#include "Stokhos.hpp"
#include "Stokhos_UnitTestHelpers.hpp"
#include "Stokhos_StieltjesPCEBasis.hpp"
 
// Quadrature functor to be passed into quadrature expansion for mapping
// from Stieltjes basis back to original PCE
struct stieltjes_pce_quad_func {
  stieltjes_pce_quad_func(const Stokhos::OrthogPolyApprox<int,double>& pce_,
        const Stokhos::OrthogPolyBasis<int,double>& basis_) :
    pce(pce_), basis(basis_), vec(1) {}
  
  double operator() (const double& a) const {
    vec[0] = a;
    return pce.evaluate(vec);
  }
  const Stokhos::OrthogPolyApprox<int,double>& pce;
  const Stokhos::OrthogPolyBasis<int,double>& basis;
  mutable Teuchos::Array<double> vec;
};
 
// Class encapsulating setup of the Stieltjes basis for a given PCE
// u = Func(x), where Func is specified by a template-parameter
template <typename Func>
struct Stieltjes_PCE_Setup {
  typedef typename Func::OrdinalType OrdinalType;
  typedef typename Func::ValueType ValueType;
  ValueType rtol, atol;
  Func func;
  bool use_pce_quad_points;
  OrdinalType sz, st_sz;
  Teuchos::RCP<const Stokhos::CompletePolynomialBasis<OrdinalType,ValueType> > basis;
  Teuchos::RCP< Stokhos::QuadOrthogPolyExpansion<OrdinalType,ValueType> > exp;
  Teuchos::RCP<const Stokhos::StieltjesPCEBasis<OrdinalType,ValueType> > st_1d_basis;
  Teuchos::RCP<const Stokhos::CompletePolynomialBasis<OrdinalType,ValueType> > st_basis;
  Teuchos::RCP<const Stokhos::Quadrature<OrdinalType,ValueType> > st_quad;
  Stokhos::OrthogPolyApprox<OrdinalType,ValueType> u, v, u_st, v_st;
  
  Stieltjes_PCE_Setup(bool use_pce_quad_points_) : 
    func(), use_pce_quad_points(use_pce_quad_points_) 
  {
    rtol = 1e-8;
    atol = 1e-12;
    const OrdinalType d = 3;
    const OrdinalType p = 5;
    
    // Create product basis
    Teuchos::Array< Teuchos::RCP<const Stokhos::OneDOrthogPolyBasis<OrdinalType,ValueType> > > bases(d);
    for (OrdinalType i=0; i<d; i++)
      bases[i] = 
  Teuchos::rcp(new Stokhos::LegendreBasis<OrdinalType,ValueType>(p));
    basis =
      Teuchos::rcp(new Stokhos::CompletePolynomialBasis<OrdinalType,ValueType>(bases));
    
    // Create approximation
    sz = basis->size();
    Stokhos::OrthogPolyApprox<OrdinalType,ValueType> x(basis);
    for (OrdinalType i=0; i<d; i++)
      x.term(i, 1) = 1.0;
    
    // Tensor product quadrature
    Teuchos::RCP<const Stokhos::Quadrature<OrdinalType,ValueType> > quad = 
      Teuchos::rcp(new Stokhos::TensorProductQuadrature<OrdinalType,ValueType>(basis, 4*p));
 
    // Triple product tensor
    Teuchos::RCP<Stokhos::Sparse3Tensor<int,double> > Cijk =
      basis->computeTripleProductTensor();
    
    // Quadrature expansion
    exp = Teuchos::rcp(new Stokhos::QuadOrthogPolyExpansion<OrdinalType,ValueType>(basis, Cijk, quad));
    
    // Compute PCE via quadrature expansion
    u.reset(basis);
    v.reset(basis);
    func.eval(*exp, x, u);
    exp->times(v,u,u);
    
    // Compute Stieltjes basis
    st_1d_basis = 
      Teuchos::rcp(new Stokhos::StieltjesPCEBasis<OrdinalType,ValueType>(
         p, Teuchos::rcp(&u,false), quad, use_pce_quad_points));
    Teuchos::Array< Teuchos::RCP<const Stokhos::OneDOrthogPolyBasis<OrdinalType,ValueType> > > st_bases(1);
    st_bases[0] = st_1d_basis;
    st_basis = 
      Teuchos::rcp(new Stokhos::CompletePolynomialBasis<OrdinalType,ValueType>(st_bases, 1e-15));
    st_sz = st_basis->size();
    u_st.reset(st_basis);
    v_st.reset(st_basis);
    u_st[0] = u.mean();
    u_st[1] = 1.0;
    
    // Tensor product quadrature
    st_quad = 
      Teuchos::rcp(new Stokhos::TensorProductQuadrature<OrdinalType,ValueType>(st_basis));
 
    // Triple product tensor
    Teuchos::RCP<Stokhos::Sparse3Tensor<int,double> > st_Cijk =
      st_basis->computeTripleProductTensor();
    
    // Quadrature expansion
    Stokhos::QuadOrthogPolyExpansion<OrdinalType,ValueType> st_exp(st_basis, 
                   st_Cijk,
                   st_quad);
    
    st_exp.times(v_st, u_st, u_st);
  }
  
};
 
//
// Stieltjes tests based on expansion of u = cos(x) where x is a U([-1,1])
// random variable
//
namespace StieltjesCosTest {
  
  template <typename Ordinal_Type, typename Value_Type>
  struct Stieltjes_Cos_Func {
    typedef Ordinal_Type OrdinalType;
    typedef Value_Type ValueType;
    static const bool is_even = true;
    void 
    eval(Stokhos::QuadOrthogPolyExpansion<OrdinalType,ValueType>& exp,
   const Stokhos::OrthogPolyApprox<OrdinalType,ValueType>& x, 
   Stokhos::OrthogPolyApprox<OrdinalType,ValueType>& u) {
      exp.cos(u,x);
    }
  };
  Stieltjes_PCE_Setup< Stieltjes_Cos_Func<int,double> > setup(true);
 
  // Tests mapping from Stieltjes basis to original is correct
  TEUCHOS_UNIT_TEST( Stokhos_StieltjesPCEBasis, CosMap ) {
   Stokhos::OrthogPolyApprox<int,double> u2(setup.basis);
   setup.st_1d_basis->transformCoeffsFromStieltjes(setup.u_st.coeff(), 
               u2.coeff());
   success = Stokhos::comparePCEs(setup.u, "u", u2, "u2", setup.rtol, setup.atol, out);
  }
 
  // Tests Stieltjes basis is orthogonal
  TEUCHOS_UNIT_TEST( Stokhos_StieltjesPCEBasis, CosOrthog ) {
    const Teuchos::Array<double>& norms = setup.st_1d_basis->norm_squared();
    const Teuchos::Array<double>& weights = setup.st_quad->getQuadWeights();
    const Teuchos::Array< Teuchos::Array<double> >& values = 
      setup.st_quad->getBasisAtQuadPoints();
    Teuchos::SerialDenseMatrix<int,double> mat(setup.st_sz, 
                 setup.st_sz);
    for (int i=0; i<setup.st_sz; i++) {
      for (int j=0; j<setup.st_sz; j++) {
  for (unsigned int k=0; k<weights.size(); k++)
    mat(i,j) += weights[k]*values[k][i]*values[k][j];
  mat(i,j) /= std::sqrt(norms[i]*norms[j]);
      }
      mat(i,i) -= 1.0;
    }
    success = mat.normInf() < setup.atol;
    if (!success) {
      out << "\n Error, mat.normInf() < atol = " << mat.normInf() 
    << " < " << setup.atol << ": failed!\n";
      out << "mat = " << mat << std::endl;
    }
  }
 
  // Tests PCE computed from Stieltjes basis is same as original
  TEUCHOS_UNIT_TEST( Stokhos_StieltjesPCEBasis, CosPCE ) {
    Stokhos::OrthogPolyApprox<int,double> v2(setup.basis);
    stieltjes_pce_quad_func quad_func(setup.v_st, *setup.st_basis);
    setup.exp->unary_op(quad_func, v2, setup.u);
    success = comparePCEs(setup.v, "v", v2, "v2", setup.rtol, setup.atol, out);
  }
 
  // Tests mean computed from Stieltjes basis is same as original
  TEUCHOS_UNIT_TEST( Stokhos_StieltjesPCEBasis, CosMean ) {
    success = Teuchos::testRelErr("v.mean()", setup.v.mean(), 
          "v_st.mean()", setup.v_st.mean(),
          "rtol", setup.rtol, 
          "rtol", setup.rtol, 
                                  Teuchos::Ptr<std::ostream>(out.getOStream().get()));
 
  }
 
  // Tests mean standard deviation from Stieltjes basis is same as original
  TEUCHOS_UNIT_TEST( Stokhos_StieltjesPCEBasis, CosStandardDeviation ) {
    success = Teuchos::testRelErr("v.standard_deviation()", 
          setup.v.standard_deviation(), 
          "v_st.standard_devaition()", 
          setup.v_st.standard_deviation(),
          "rtol", 1e-1, 
          "rtol", 1e-1, 
                                  Teuchos::Ptr<std::ostream>(out.getOStream().get()));
  }
 
}
  
//
// Stieltjes tests based on expansion of u = sin(x) where x is a U([-1,1])
// random variable
//
namespace StieltjesSinTest {
 
  template <typename Ordinal_Type, typename Value_Type>
  struct Stieltjes_Sin_Func {
    typedef Ordinal_Type OrdinalType;
    typedef Value_Type ValueType;
    static const bool is_even = false;
    void 
    eval(Stokhos::QuadOrthogPolyExpansion<OrdinalType,ValueType>& exp,
   const Stokhos::OrthogPolyApprox<OrdinalType,ValueType>& x, 
   Stokhos::OrthogPolyApprox<OrdinalType,ValueType>& u) {
      exp.sin(u,x);
    }
  };
  Stieltjes_PCE_Setup< Stieltjes_Sin_Func<int,double> > setup(true);
 
  // Tests mapping from Stieltjes basis to original is correct
  TEUCHOS_UNIT_TEST( Stokhos_StieltjesPCEBasis, SinMap ) {
   Stokhos::OrthogPolyApprox<int,double> u2(setup.basis);
   setup.st_1d_basis->transformCoeffsFromStieltjes(setup.u_st.coeff(), 
               u2.coeff());
   success = Stokhos::comparePCEs(setup.u, "u", u2, "u2", setup.rtol, setup.atol, out);
  }
 
  // Tests Stieltjes basis is orthogonal
  TEUCHOS_UNIT_TEST( Stokhos_StieltjesPCEBasis, SinOrthog ) {
    const Teuchos::Array<double>& norms = setup.st_1d_basis->norm_squared();
    const Teuchos::Array<double>& weights = setup.st_quad->getQuadWeights();
    const Teuchos::Array< Teuchos::Array<double> >& values = 
      setup.st_quad->getBasisAtQuadPoints();
    Teuchos::SerialDenseMatrix<int,double> mat(setup.st_sz, 
                 setup.st_sz);
    for (int i=0; i<setup.st_sz; i++) {
      for (int j=0; j<setup.st_sz; j++) {
  for (unsigned int k=0; k<weights.size(); k++)
    mat(i,j) += weights[k]*values[k][i]*values[k][j];
  mat(i,j) /= std::sqrt(norms[i]*norms[j]);
      }
      mat(i,i) -= 1.0;
    }
    success = mat.normInf() < setup.atol;
    if (!success) {
      out << "\n Error, mat.normInf() < atol = " << mat.normInf() 
    << " < " << setup.atol << ": failed!\n";
      out << "mat = " << mat << std::endl;
    }
  }
 
  // Tests PCE computed from Stieltjes basis is same as original
  TEUCHOS_UNIT_TEST( Stokhos_StieltjesPCEBasis, SinPCE ) {
    Stokhos::OrthogPolyApprox<int,double> v2(setup.basis);
    stieltjes_pce_quad_func quad_func(setup.v_st, *setup.st_basis);
    setup.exp->unary_op(quad_func, v2, setup.u);
    success = comparePCEs(setup.v, "v", v2, "v2", setup.rtol, setup.atol, out);
  }
 
  // Tests mean computed from Stieltjes basis is same as original
  TEUCHOS_UNIT_TEST( Stokhos_StieltjesPCEBasis, SinMean ) {
    success = Teuchos::testRelErr("v.mean()", setup.v.mean(), 
          "v_st.mean()", setup.v_st.mean(),
          "rtol", setup.rtol, 
          "rtol", setup.rtol, 
                                  Teuchos::Ptr<std::ostream>(out.getOStream().get()));
  }
 
  // Tests mean standard deviation from Stieltjes basis is same as original
  TEUCHOS_UNIT_TEST( Stokhos_StieltjesPCEBasis, SinStandardDeviation ) {
    success = Teuchos::testRelErr("v.standard_deviation()", 
          setup.v.standard_deviation(), 
          "v_st.standard_devaition()", 
          setup.v_st.standard_deviation(),
          "rtol", 1e-1, 
          "rtol", 1e-1, 
                                  Teuchos::Ptr<std::ostream>(out.getOStream().get()));
  }
 
}
 
//
// Stieltjes tests based on expansion of u = exp(x) where x is a U([-1,1])
// random variable.  For this test we don't use the PCE quad points and 
// instead use those generated for the Stieltjes basis
//
namespace StieltjesExpTest {
 
  template <typename Ordinal_Type, typename Value_Type>
  struct Stieltjes_Exp_Func {
    typedef Ordinal_Type OrdinalType;
    typedef Value_Type ValueType;
    static const bool is_even = false;
    void 
    eval(Stokhos::QuadOrthogPolyExpansion<OrdinalType,ValueType>& exp,
   const Stokhos::OrthogPolyApprox<OrdinalType,ValueType>& x, 
   Stokhos::OrthogPolyApprox<OrdinalType,ValueType>& u) {
      exp.exp(u,x);
    }
  };
  Stieltjes_PCE_Setup< Stieltjes_Exp_Func<int,double> > setup(false);
 
  // Tests mapping from Stieltjes basis to original is correct
  TEUCHOS_UNIT_TEST( Stokhos_StieltjesPCEBasis, ExpMap ) {
   Stokhos::OrthogPolyApprox<int,double> u2(setup.basis);
   setup.st_1d_basis->transformCoeffsFromStieltjes(setup.u_st.coeff(), 
               u2.coeff());
   success = Stokhos::comparePCEs(setup.u, "u", u2, "u2", setup.rtol, setup.atol, out);
  }
 
  // Tests Stieltjes basis is orthogonal
  TEUCHOS_UNIT_TEST( Stokhos_StieltjesPCEBasis, ExpOrthog ) {
    const Teuchos::Array<double>& norms = setup.st_1d_basis->norm_squared();
    const Teuchos::Array<double>& weights = setup.st_quad->getQuadWeights();
    const Teuchos::Array< Teuchos::Array<double> >& values = 
      setup.st_quad->getBasisAtQuadPoints();
    Teuchos::SerialDenseMatrix<int,double> mat(setup.st_sz, 
                 setup.st_sz);
    for (int i=0; i<setup.st_sz; i++) {
      for (int j=0; j<setup.st_sz; j++) {
  for (unsigned int k=0; k<weights.size(); k++)
    mat(i,j) += weights[k]*values[k][i]*values[k][j];
  mat(i,j) /= std::sqrt(norms[i]*norms[j]);
      }
      mat(i,i) -= 1.0;
    }
    success = mat.normInf() < setup.atol;
    if (!success) {
      out << "\n Error, mat.normInf() < atol = " << mat.normInf() 
    << " < " << setup.atol << ": failed!\n";
      out << "mat = " << mat << std::endl;
    }
  }
 
  // Tests PCE computed from Stieltjes basis is same as original
  TEUCHOS_UNIT_TEST( Stokhos_StieltjesPCEBasis, ExpPCE ) {
    Stokhos::OrthogPolyApprox<int,double> v2(setup.basis);
    stieltjes_pce_quad_func quad_func(setup.v_st, *setup.st_basis);
    setup.exp->unary_op(quad_func, v2, setup.u);
    success = comparePCEs(setup.v, "v", v2, "v2", setup.rtol, setup.atol, out);
  }
 
  // Tests mean computed from Stieltjes basis is same as original
  TEUCHOS_UNIT_TEST( Stokhos_StieltjesPCEBasis, ExpMean ) {
    success = Teuchos::testRelErr("v.mean()", setup.v.mean(), 
          "v_st.mean()", setup.v_st.mean(),
          "rtol", setup.rtol, 
          "rtol", setup.rtol, 
                                  Teuchos::Ptr<std::ostream>(out.getOStream().get()));
  }
 
  // Tests mean standard deviation from Stieltjes basis is same as original
  TEUCHOS_UNIT_TEST( Stokhos_StieltjesPCEBasis, ExpStandardDeviation ) {
    success = Teuchos::testRelErr("v.standard_deviation()", 
          setup.v.standard_deviation(), 
          "v_st.standard_devaition()", 
          setup.v_st.standard_deviation(),
          "rtol", 1e-1, 
          "rtol", 1e-1, 
                                  Teuchos::Ptr<std::ostream>(out.getOStream().get()));
  }
 
}
 
int main( int argc, char* argv[] ) {
  Teuchos::GlobalMPISession mpiSession(&argc, &argv);
  return Teuchos::UnitTestRepository::runUnitTestsFromMain(argc, argv);
}