<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'>
  <node id='_common_cmds_'>
    <name>Common Commands</name>
    <description>These commands are available on all VTY nodes. They are listed here only once, to unclutter the VTY reference.</description>
    <command id='help'>
      <params>
        <param name='help' doc='Description of the interactive help system' />
      </params>
    </command>
    <command id='list'>
      <params>
        <param name='list' doc='Print command list' />
      </params>
    </command>
    <command id='write terminal'>
      <params>
        <param name='write' doc='Write running configuration to memory, network, or terminal' />
        <param name='terminal' doc='Write to terminal' />
      </params>
    </command>
    <command id='write file'>
      <params>
        <param name='write' doc='Write running configuration to memory, network, or terminal' />
        <param name='file' doc='Write to configuration file' />
      </params>
    </command>
    <command id='write memory'>
      <params>
        <param name='write' doc='Write running configuration to memory, network, or terminal' />
        <param name='memory' doc='Write configuration to the file (same as write file)' />
      </params>
    </command>
    <command id='write'>
      <params>
        <param name='write' doc='Write running configuration to memory, network, or terminal' />
      </params>
    </command>
    <command id='show running-config'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='running-config' doc='running configuration' />
      </params>
    </command>
    <command id='exit'>
      <params>
        <param name='exit' doc='Exit current mode and down to previous mode' />
      </params>
    </command>
    <command id='end'>
      <params>
        <param name='end' doc='End current mode and change to enable mode.' />
      </params>
    </command>
  </node>
  <node id='view'>
    <name>view</name>
    <command id='show version'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='version' doc='Displays program version' />
      </params>
    </command>
    <command id='show online-help'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='online-help' doc='Online help' />
      </params>
    </command>
    <command id='enable'>
      <params>
        <param name='enable' doc='Turn on privileged mode command' />
      </params>
    </command>
    <command id='terminal length &lt;0-512&gt;'>
      <params>
        <param name='terminal' doc='Set terminal line parameters' />
        <param name='length' doc='Set number of lines on a screen' />
        <param name='&lt;0-512&gt;' doc='Number of lines on screen (0 for no pausing)' />
      </params>
    </command>
    <command id='terminal no length'>
      <params>
        <param name='terminal' doc='Set terminal line parameters' />
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='length' doc='Set number of lines on a screen' />
      </params>
    </command>
    <command id='who'>
      <params>
        <param name='who' doc='Display who is on vty' />
      </params>
    </command>
    <command id='show history'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='history' doc='Display the session command history' />
      </params>
    </command>
    <command id='show network'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='network' doc='Display information about a GSM NETWORK' />
      </params>
    </command>
    <command id='show bts [&lt;0-255&gt;]'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='bts' doc='Display information about a BTS' />
        <param name='[&lt;0-255&gt;]' doc='BTS number' />
      </params>
    </command>
    <command id='show trx [&lt;0-255&gt;] [&lt;0-255&gt;]'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='trx' doc='Display information about a TRX' />
        <param name='[&lt;0-255&gt;]' doc='BTS Number' />
        <param name='[&lt;0-255&gt;]' doc='TRX Number' />
      </params>
    </command>
    <command id='show timeslot [&lt;0-255&gt;] [&lt;0-255&gt;] [&lt;0-7&gt;]'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='timeslot' doc='Display information about a TS' />
        <param name='[&lt;0-255&gt;]' doc='BTS Number' />
        <param name='[&lt;0-255&gt;]' doc='TRX Number' />
        <param name='[&lt;0-7&gt;]' doc='Timeslot Number' />
      </params>
    </command>
    <command id='show lchan [&lt;0-255&gt;] [&lt;0-255&gt;] [&lt;0-7&gt;] [lchan_nr]'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='lchan' doc='Display information about a logical channel' />
        <param name='[&lt;0-255&gt;]' doc='BTS Number' />
        <param name='[&lt;0-255&gt;]' doc='TRX Number' />
        <param name='[&lt;0-7&gt;]' doc='Timeslot Number' />
        <param name='[lchan_nr]' doc='Logical Channel Number' />
      </params>
    </command>
    <command id='show lchan summary [&lt;0-255&gt;] [&lt;0-255&gt;] [&lt;0-7&gt;] [lchan_nr]'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='lchan' doc='Display information about a logical channel' />
        <param name='summary' doc='Short summary' />
        <param name='[&lt;0-255&gt;]' doc='BTS Number' />
        <param name='[&lt;0-255&gt;]' doc='TRX Number' />
        <param name='[&lt;0-7&gt;]' doc='Timeslot Number' />
        <param name='[lchan_nr]' doc='Logical Channel Number' />
      </params>
    </command>
    <command id='show paging [&lt;0-255&gt;]'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='paging' doc='Display information about paging reuqests of a BTS' />
        <param name='[&lt;0-255&gt;]' doc='BTS Number' />
      </params>
    </command>
    <command id='show paging-group &lt;0-255&gt; IMSI'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='paging-group' doc='Display the paging group' />
        <param name='&lt;0-255&gt;' doc='BTS Number' />
        <param name='IMSI' doc='IMSI' />
      </params>
    </command>
    <command id='logging enable'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='enable' doc='Enables logging to this vty' />
      </params>
    </command>
    <command id='logging disable'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='disable' doc='Disables logging to this vty' />
      </params>
    </command>
    <command id='logging filter all (0|1)'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='filter' doc='Filter log messages' />
        <param name='all' doc='Do you want to log all messages?' />
        <param name='0' doc='Only print messages matched by other filters' />
        <param name='1' doc='Bypass filter and print all messages' />
      </params>
    </command>
    <command id='logging color (0|1)'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='color' doc='Configure color-printing for log messages' />
        <param name='0' doc='Don&apos;t use color for printing messages' />
        <param name='1' doc='Use color for printing messages' />
      </params>
    </command>
    <command id='logging timestamp (0|1)'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='timestamp' doc='Configure log message timestamping' />
        <param name='0' doc='Don&apos;t prefix each log message' />
        <param name='1' doc='Prefix each log message with current timestamp' />
      </params>
    </command>
    <command id='logging print extended-timestamp (0|1)'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='print' doc='Log output settings' />
        <param name='extended-timestamp' doc='Configure log message timestamping' />
        <param name='0' doc='Don&apos;t prefix each log message' />
        <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
      </params>
    </command>
    <command id='logging print category (0|1)'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='print' doc='Log output settings' />
        <param name='category' doc='Configure log message' />
        <param name='0' doc='Don&apos;t prefix each log message' />
        <param name='1' doc='Prefix each log message with category/subsystem name' />
      </params>
    </command>
    <command id='logging print category-hex (0|1)'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='print' doc='Log output settings' />
        <param name='category-hex' doc='Configure log message' />
        <param name='0' doc='Don&apos;t prefix each log message' />
        <param name='1' doc='Prefix each log message with category/subsystem nr in hex (&apos;&lt;000b&gt;&apos;)' />
      </params>
    </command>
    <command id='logging print level (0|1)'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='print' doc='Log output settings' />
        <param name='level' doc='Configure log message' />
        <param name='0' doc='Don&apos;t prefix each log message' />
        <param name='1' doc='Prefix each log message with the log level name' />
      </params>
    </command>
    <command id='logging print file (0|1|basename) [last]'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='print' doc='Log output settings' />
        <param name='file' doc='Configure log message' />
        <param name='0' doc='Don&apos;t prefix each log message' />
        <param name='1' doc='Prefix each log message with the source file and line' />
        <param name='basename' doc='Prefix each log message with the source file&apos;s basename (strip leading paths) and line' />
        <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
      </params>
    </command>
    <command id='logging set-log-mask MASK'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='set-log-mask' doc='Set the logmask of this logging target' />
        <param name='MASK' doc='List of logging categories to log, e.g. &apos;abc:mno:xyz&apos;. Available log categories depend on the specific application, refer to the &apos;logging level&apos; command. Optionally add individual log levels like &apos;abc,1:mno,3:xyz,5&apos;, where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
      </params>
    </command>
    <command id='logging level (rll|cc|mm|rr|rsl|nm|mncc|pag|meas|sccp|msc|mgcp|ho|db|ref|gprs|ns|bssgp|llc|sndcp|nat|ctrl|smpp|filter|ranap|sua|pcu|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='level' doc='Set the log level for a specified category' />
        <param name='rll' doc='A-bis Radio Link Layer (RLL)' />
        <param name='cc' doc='Layer3 Call Control (CC)' />
        <param name='mm' doc='Layer3 Mobility Management (MM)' />
        <param name='rr' doc='Layer3 Radio Resource (RR)' />
        <param name='rsl' doc='A-bis Radio Siganlling Link (RSL)' />
        <param name='nm' doc='A-bis Network Management / O&amp;M (NM/OML)' />
        <param name='mncc' doc='MNCC API for Call Control application' />
        <param name='pag' doc='Paging Subsystem' />
        <param name='meas' doc='Radio Measurement Processing' />
        <param name='sccp' doc='SCCP Protocol' />
        <param name='msc' doc='Mobile Switching Center' />
        <param name='mgcp' doc='Media Gateway Control Protocol' />
        <param name='ho' doc='Hand-Over' />
        <param name='db' doc='Database Layer' />
        <param name='ref' doc='Reference Counting' />
        <param name='gprs' doc='GPRS Packet Service' />
        <param name='ns' doc='GPRS Network Service (NS)' />
        <param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' />
        <param name='llc' doc='GPRS Logical Link Control Protocol (LLC)' />
        <param name='sndcp' doc='GPRS Sub-Network Dependent Control Protocol (SNDCP)' />
        <param name='nat' doc='GSM 08.08 NAT/Multiplexer' />
        <param name='ctrl' doc='Control interface' />
        <param name='smpp' doc='SMPP interface for external SMS apps' />
        <param name='filter' doc='BSC/NAT IMSI based filtering' />
        <param name='ranap' doc='Radio Access Network Application Part Protocol' />
        <param name='sua' doc='SCCP User Adaptation Protocol' />
        <param name='pcu' doc='PCU Interface' />
        <param name='lglobal' doc='Library-internal global log family' />
        <param name='llapd' doc='LAPD in libosmogsm' />
        <param name='linp' doc='A-bis Intput Subsystem' />
        <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
        <param name='lmi' doc='A-bis Input Driver for Signalling' />
        <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
        <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
        <param name='lctrl' doc='Control Interface' />
        <param name='lgtp' doc='GPRS GTP library' />
        <param name='lstats' doc='Statistics messages and logging' />
        <param name='lgsup' doc='Generic Subscriber Update Protocol' />
        <param name='loap' doc='Osmocom Authentication Protocol' />
        <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
        <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
        <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
        <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
        <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
        <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
        <param name='lrspro' doc='Remote SIM protocol' />
        <param name='debug' doc='Log debug messages and higher levels' />
        <param name='info' doc='Log informational messages and higher levels' />
        <param name='notice' doc='Log noticeable messages and higher levels' />
        <param name='error' doc='Log error messages and higher levels' />
        <param name='fatal' doc='Log only fatal messages' />
      </params>
    </command>
    <command id='logging level set-all (debug|info|notice|error|fatal)'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='level' doc='Set the log level for a specified category' />
        <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
        <param name='debug' doc='Log debug messages and higher levels' />
        <param name='info' doc='Log informational messages and higher levels' />
        <param name='notice' doc='Log noticeable messages and higher levels' />
        <param name='error' doc='Log error messages and higher levels' />
        <param name='fatal' doc='Log only fatal messages' />
      </params>
    </command>
    <command id='logging level force-all (debug|info|notice|error|fatal)'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='level' doc='Set the log level for a specified category' />
        <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the &apos;no logging level force-all&apos; command. Note: any &apos;logging level &lt;category&gt; &lt;level&gt;&apos; commands will have no visible effect after this, until the forced level is released.' />
        <param name='debug' doc='Log debug messages and higher levels' />
        <param name='info' doc='Log informational messages and higher levels' />
        <param name='notice' doc='Log noticeable messages and higher levels' />
        <param name='error' doc='Log error messages and higher levels' />
        <param name='fatal' doc='Log only fatal messages' />
      </params>
    </command>
    <command id='no logging level force-all'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='logging' doc='Configure logging' />
        <param name='level' doc='Set the log level for a specified category' />
        <param name='force-all' doc='Release any globally forced log level set with &apos;logging level force-all &lt;level&gt;&apos;' />
      </params>
    </command>
    <command id='show logging vty'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='logging' doc='Show current logging configuration' />
        <param name='vty' doc='Show current logging configuration for this vty' />
      </params>
    </command>
    <command id='show alarms'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='alarms' doc='Show current logging configuration' />
      </params>
    </command>
    <command id='show stats'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='stats' doc='Show statistical values' />
      </params>
    </command>
    <command id='show stats level (global|peer|subscriber)'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='stats' doc='Show statistical values' />
        <param name='level' doc='Set the maximum group level' />
        <param name='global' doc='Show global groups only' />
        <param name='peer' doc='Show global and network peer related groups' />
        <param name='subscriber' doc='Show global, peer, and subscriber groups' />
      </params>
    </command>
    <command id='show asciidoc counters'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='asciidoc' doc='Asciidoc generation' />
        <param name='counters' doc='Generate table of all registered counters' />
      </params>
    </command>
    <command id='show rate-counters'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='rate-counters' doc='Show all rate counters' />
      </params>
    </command>
    <command id='show e1_driver'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='e1_driver' doc='Display information about available E1 drivers' />
      </params>
    </command>
    <command id='show e1_line [line_nr] [stats]'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='e1_line' doc='Display information about a E1 line' />
        <param name='[line_nr]' doc='E1 Line Number' />
        <param name='[stats]' doc='Include statistics' />
      </params>
    </command>
    <command id='show e1_timeslot [line_nr] [ts_nr]'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='e1_timeslot' doc='Display information about a E1 timeslot' />
        <param name='[line_nr]' doc='E1 Line Number' />
        <param name='[ts_nr]' doc='E1 Timeslot Number' />
      </params>
    </command>
    <command id='show fsm NAME'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='fsm' doc='Show information about finite state machines' />
        <param name='NAME' doc='Display information about a single named finite state machine' />
      </params>
    </command>
    <command id='show fsm all'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='fsm' doc='Show information about finite state machines' />
        <param name='all' doc='Display a list of all registered finite state machines' />
      </params>
    </command>
    <command id='show fsm-instances NAME'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='fsm-instances' doc='Show information about finite state machine instances' />
        <param name='NAME' doc='Display a list of all FSM instances of the named finite state machine' />
      </params>
    </command>
    <command id='show fsm-instances all'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='fsm-instances' doc='Show information about finite state machine instances' />
        <param name='all' doc='Display a list of all FSM instances of all finite state machine' />
      </params>
    </command>
    <command id='show subscriber (extension|imsi|tmsi|id) ID'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='subscriber' doc='Operations on a Subscriber' />
        <param name='extension' doc='Identify subscriber by extension (phone number)' />
        <param name='imsi' doc='Identify subscriber by IMSI' />
        <param name='tmsi' doc='Identify subscriber by TMSI' />
        <param name='id' doc='Identify subscriber by database ID' />
        <param name='ID' doc='Identifier for the subscriber' />
      </params>
    </command>
    <command id='show subscriber cache'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='subscriber' doc='Show information about subscribers' />
        <param name='cache' doc='Display contents of subscriber cache' />
      </params>
    </command>
    <command id='sms send pending'>
      <params>
        <param name='sms' doc='SMS related commands' />
        <param name='send' doc='SMS Sending related commands' />
        <param name='pending' doc='Send all pending SMS' />
      </params>
    </command>
    <command id='subscriber create imsi ID'>
      <params>
        <param name='subscriber' doc='Operations on a Subscriber' />
        <param name='create' doc='Create new subscriber' />
        <param name='imsi' doc='Identify the subscriber by his IMSI' />
        <param name='ID' doc='Identifier for the subscriber' />
      </params>
    </command>
    <command id='subscriber (extension|imsi|tmsi|id) ID sms sender (extension|imsi|tmsi|id) SENDER_ID send .LINE'>
      <params>
        <param name='subscriber' doc='Operations on a Subscriber' />
        <param name='extension' doc='Identify subscriber by extension (phone number)' />
        <param name='imsi' doc='Identify subscriber by IMSI' />
        <param name='tmsi' doc='Identify subscriber by TMSI' />
        <param name='id' doc='Identify subscriber by database ID' />
        <param name='ID' doc='Identifier for the subscriber' />
        <param name='sms' doc='SMS Operations' />
        <param name='sender' doc='Operations on a Subscriber' />
        <param name='extension' doc='Identify subscriber by extension (phone number)' />
        <param name='imsi' doc='Identify subscriber by IMSI' />
        <param name='tmsi' doc='Identify subscriber by TMSI' />
        <param name='id' doc='Identify subscriber by database ID' />
        <param name='SENDER_ID' doc='Identifier for the subscriber' />
        <param name='send' doc='Send SMS' />
        <param name='.LINE' doc='Actual SMS Text' />
      </params>
    </command>
    <command id='subscriber (extension|imsi|tmsi|id) ID silent-sms sender (extension|imsi|tmsi|id) SENDER_ID send .LINE'>
      <params>
        <param name='subscriber' doc='Operations on a Subscriber' />
        <param name='extension' doc='Identify subscriber by extension (phone number)' />
        <param name='imsi' doc='Identify subscriber by IMSI' />
        <param name='tmsi' doc='Identify subscriber by TMSI' />
        <param name='id' doc='Identify subscriber by database ID' />
        <param name='ID' doc='Identifier for the subscriber' />
        <param name='silent-sms' doc='Silent SMS Operations' />
        <param name='sender' doc='Operations on a Subscriber' />
        <param name='extension' doc='Identify subscriber by extension (phone number)' />
        <param name='imsi' doc='Identify subscriber by IMSI' />
        <param name='tmsi' doc='Identify subscriber by TMSI' />
        <param name='id' doc='Identify subscriber by database ID' />
        <param name='SENDER_ID' doc='Identifier for the subscriber' />
        <param name='send' doc='Send SMS' />
        <param name='.LINE' doc='Actual SMS Text' />
      </params>
    </command>
    <command id='subscriber (extension|imsi|tmsi|id) ID silent-call start (any|tch/f|tch/any|sdcch)'>
      <params>
        <param name='subscriber' doc='Operations on a Subscriber' />
        <param name='extension' doc='Identify subscriber by extension (phone number)' />
        <param name='imsi' doc='Identify subscriber by IMSI' />
        <param name='tmsi' doc='Identify subscriber by TMSI' />
        <param name='id' doc='Identify subscriber by database ID' />
        <param name='ID' doc='Identifier for the subscriber' />
        <param name='silent-call' doc='Silent call operation' />
        <param name='start' doc='Start silent call' />
        <param name='any' doc='Any channel' />
        <param name='tch/f' doc='TCH/F channel' />
        <param name='tch/any' doc='Any TCH channel' />
        <param name='sdcch' doc='SDCCH channel' />
      </params>
    </command>
    <command id='subscriber (extension|imsi|tmsi|id) ID silent-call stop'>
      <params>
        <param name='subscriber' doc='Operations on a Subscriber' />
        <param name='extension' doc='Identify subscriber by extension (phone number)' />
        <param name='imsi' doc='Identify subscriber by IMSI' />
        <param name='tmsi' doc='Identify subscriber by TMSI' />
        <param name='id' doc='Identify subscriber by database ID' />
        <param name='ID' doc='Identifier for the subscriber' />
        <param name='silent-call' doc='Silent call operation' />
        <param name='stop' doc='Stop silent call' />
      </params>
    </command>
    <command id='subscriber (extension|imsi|tmsi|id) ID ussd-notify (0|1|2) .TEXT'>
      <params>
        <param name='subscriber' doc='Operations on a Subscriber' />
        <param name='extension' doc='Identify subscriber by extension (phone number)' />
        <param name='imsi' doc='Identify subscriber by IMSI' />
        <param name='tmsi' doc='Identify subscriber by TMSI' />
        <param name='id' doc='Identify subscriber by database ID' />
        <param name='ID' doc='Identifier for the subscriber' />
        <param name='ussd-notify' doc='Send a USSD notify to the subscriber' />
        <param name='0' doc='Alerting Level 0' />
        <param name='1' doc='Alerting Level 1' />
        <param name='2' doc='Alerting Level 2' />
        <param name='.TEXT' doc='Text of USSD message to send' />
      </params>
    </command>
    <command id='subscriber (extension|imsi|tmsi|id) ID ms-test close-loop (a|b|c|d|e|f|i)'>
      <params>
        <param name='subscriber' doc='Operations on a Subscriber' />
        <param name='extension' doc='Identify subscriber by extension (phone number)' />
        <param name='imsi' doc='Identify subscriber by IMSI' />
        <param name='tmsi' doc='Identify subscriber by TMSI' />
        <param name='id' doc='Identify subscriber by database ID' />
        <param name='ID' doc='Identifier for the subscriber' />
        <param name='ms-test' doc='Send a TS 04.14 MS Test Command to subscriber' />
        <param name='close-loop' doc='Close a TCH Loop inside the MS' />
        <param name='a' doc='Loop Type A' />
        <param name='b' doc='Loop Type B' />
        <param name='c' doc='Loop Type C' />
        <param name='d' doc='Loop Type D' />
        <param name='e' doc='Loop Type E' />
        <param name='f' doc='Loop Type F' />
        <param name='i' doc='Loop Type I' />
      </params>
    </command>
    <command id='subscriber (extension|imsi|tmsi|id) ID ms-test open-loop'>
      <params>
        <param name='subscriber' doc='Operations on a Subscriber' />
        <param name='extension' doc='Identify subscriber by extension (phone number)' />
        <param name='imsi' doc='Identify subscriber by IMSI' />
        <param name='tmsi' doc='Identify subscriber by TMSI' />
        <param name='id' doc='Identify subscriber by database ID' />
        <param name='ID' doc='Identifier for the subscriber' />
        <param name='ms-test' doc='Send a TS 04.14 MS Test Command to subscriber' />
        <param name='open-loop' doc='Open a TCH Loop inside the MS' />
      </params>
    </command>
    <command id='subscriber (extension|imsi|tmsi|id) ID update'>
      <params>
        <param name='subscriber' doc='Operations on a Subscriber' />
        <param name='extension' doc='Identify subscriber by extension (phone number)' />
        <param name='imsi' doc='Identify subscriber by IMSI' />
        <param name='tmsi' doc='Identify subscriber by TMSI' />
        <param name='id' doc='Identify subscriber by database ID' />
        <param name='ID' doc='Identifier for the subscriber' />
        <param name='update' doc='Update the subscriber data from the dabase.' />
      </params>
    </command>
    <command id='show statistics'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='statistics' doc='Display network statistics' />
      </params>
    </command>
    <command id='show sms-queue'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='sms-queue' doc='Display SMSqueue statistics' />
      </params>
    </command>
    <command id='logging filter imsi IMSI'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='filter' doc='Filter log messages' />
        <param name='imsi' doc='Filter log messages by IMSI' />
        <param name='IMSI' doc='IMSI to be used as filter' />
      </params>
    </command>
    <command id='show smpp esme'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='smpp' doc='SMPP Interface' />
        <param name='esme' doc='SMPP External SMS Entity' />
      </params>
    </command>
  </node>
  <node id='enable'>
    <name>enable</name>
    <command id='disable'>
      <params>
        <param name='disable' doc='Turn off privileged mode command' />
      </params>
    </command>
    <command id='configure terminal'>
      <params>
        <param name='configure' doc='Configuration from vty interface' />
        <param name='terminal' doc='Configuration terminal' />
      </params>
    </command>
    <command id='copy running-config startup-config'>
      <params>
        <param name='copy' doc='Copy configuration' />
        <param name='running-config' doc='Copy running config to... ' />
        <param name='startup-config' doc='Copy running config to startup config (same as write file)' />
      </params>
    </command>
    <command id='show startup-config'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='startup-config' doc='Contentes of startup configuration' />
      </params>
    </command>
    <command id='show version'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='version' doc='Displays program version' />
      </params>
    </command>
    <command id='show online-help'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='online-help' doc='Online help' />
      </params>
    </command>
    <command id='terminal length &lt;0-512&gt;'>
      <params>
        <param name='terminal' doc='Set terminal line parameters' />
        <param name='length' doc='Set number of lines on a screen' />
        <param name='&lt;0-512&gt;' doc='Number of lines on screen (0 for no pausing)' />
      </params>
    </command>
    <command id='terminal no length'>
      <params>
        <param name='terminal' doc='Set terminal line parameters' />
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='length' doc='Set number of lines on a screen' />
      </params>
    </command>
    <command id='who'>
      <params>
        <param name='who' doc='Display who is on vty' />
      </params>
    </command>
    <command id='show history'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='history' doc='Display the session command history' />
      </params>
    </command>
    <command id='terminal monitor'>
      <params>
        <param name='terminal' doc='Set terminal line parameters' />
        <param name='monitor' doc='Copy debug output to the current terminal line' />
      </params>
    </command>
    <command id='terminal no monitor'>
      <params>
        <param name='terminal' doc='Set terminal line parameters' />
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='monitor' doc='Copy debug output to the current terminal line' />
      </params>
    </command>
    <command id='show network'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='network' doc='Display information about a GSM NETWORK' />
      </params>
    </command>
    <command id='show bts [&lt;0-255&gt;]'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='bts' doc='Display information about a BTS' />
        <param name='[&lt;0-255&gt;]' doc='BTS number' />
      </params>
    </command>
    <command id='show trx [&lt;0-255&gt;] [&lt;0-255&gt;]'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='trx' doc='Display information about a TRX' />
        <param name='[&lt;0-255&gt;]' doc='BTS Number' />
        <param name='[&lt;0-255&gt;]' doc='TRX Number' />
      </params>
    </command>
    <command id='show timeslot [&lt;0-255&gt;] [&lt;0-255&gt;] [&lt;0-7&gt;]'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='timeslot' doc='Display information about a TS' />
        <param name='[&lt;0-255&gt;]' doc='BTS Number' />
        <param name='[&lt;0-255&gt;]' doc='TRX Number' />
        <param name='[&lt;0-7&gt;]' doc='Timeslot Number' />
      </params>
    </command>
    <command id='show lchan [&lt;0-255&gt;] [&lt;0-255&gt;] [&lt;0-7&gt;] [lchan_nr]'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='lchan' doc='Display information about a logical channel' />
        <param name='[&lt;0-255&gt;]' doc='BTS Number' />
        <param name='[&lt;0-255&gt;]' doc='TRX Number' />
        <param name='[&lt;0-7&gt;]' doc='Timeslot Number' />
        <param name='[lchan_nr]' doc='Logical Channel Number' />
      </params>
    </command>
    <command id='show lchan summary [&lt;0-255&gt;] [&lt;0-255&gt;] [&lt;0-7&gt;] [lchan_nr]'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='lchan' doc='Display information about a logical channel' />
        <param name='summary' doc='Short summary' />
        <param name='[&lt;0-255&gt;]' doc='BTS Number' />
        <param name='[&lt;0-255&gt;]' doc='TRX Number' />
        <param name='[&lt;0-7&gt;]' doc='Timeslot Number' />
        <param name='[lchan_nr]' doc='Logical Channel Number' />
      </params>
    </command>
    <command id='show paging [&lt;0-255&gt;]'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='paging' doc='Display information about paging reuqests of a BTS' />
        <param name='[&lt;0-255&gt;]' doc='BTS Number' />
      </params>
    </command>
    <command id='show paging-group &lt;0-255&gt; IMSI'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='paging-group' doc='Display the paging group' />
        <param name='&lt;0-255&gt;' doc='BTS Number' />
        <param name='IMSI' doc='IMSI' />
      </params>
    </command>
    <command id='logging enable'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='enable' doc='Enables logging to this vty' />
      </params>
    </command>
    <command id='logging disable'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='disable' doc='Disables logging to this vty' />
      </params>
    </command>
    <command id='logging filter all (0|1)'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='filter' doc='Filter log messages' />
        <param name='all' doc='Do you want to log all messages?' />
        <param name='0' doc='Only print messages matched by other filters' />
        <param name='1' doc='Bypass filter and print all messages' />
      </params>
    </command>
    <command id='logging color (0|1)'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='color' doc='Configure color-printing for log messages' />
        <param name='0' doc='Don&apos;t use color for printing messages' />
        <param name='1' doc='Use color for printing messages' />
      </params>
    </command>
    <command id='logging timestamp (0|1)'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='timestamp' doc='Configure log message timestamping' />
        <param name='0' doc='Don&apos;t prefix each log message' />
        <param name='1' doc='Prefix each log message with current timestamp' />
      </params>
    </command>
    <command id='logging print extended-timestamp (0|1)'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='print' doc='Log output settings' />
        <param name='extended-timestamp' doc='Configure log message timestamping' />
        <param name='0' doc='Don&apos;t prefix each log message' />
        <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
      </params>
    </command>
    <command id='logging print category (0|1)'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='print' doc='Log output settings' />
        <param name='category' doc='Configure log message' />
        <param name='0' doc='Don&apos;t prefix each log message' />
        <param name='1' doc='Prefix each log message with category/subsystem name' />
      </params>
    </command>
    <command id='logging print category-hex (0|1)'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='print' doc='Log output settings' />
        <param name='category-hex' doc='Configure log message' />
        <param name='0' doc='Don&apos;t prefix each log message' />
        <param name='1' doc='Prefix each log message with category/subsystem nr in hex (&apos;&lt;000b&gt;&apos;)' />
      </params>
    </command>
    <command id='logging print level (0|1)'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='print' doc='Log output settings' />
        <param name='level' doc='Configure log message' />
        <param name='0' doc='Don&apos;t prefix each log message' />
        <param name='1' doc='Prefix each log message with the log level name' />
      </params>
    </command>
    <command id='logging print file (0|1|basename) [last]'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='print' doc='Log output settings' />
        <param name='file' doc='Configure log message' />
        <param name='0' doc='Don&apos;t prefix each log message' />
        <param name='1' doc='Prefix each log message with the source file and line' />
        <param name='basename' doc='Prefix each log message with the source file&apos;s basename (strip leading paths) and line' />
        <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
      </params>
    </command>
    <command id='logging set-log-mask MASK'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='set-log-mask' doc='Set the logmask of this logging target' />
        <param name='MASK' doc='List of logging categories to log, e.g. &apos;abc:mno:xyz&apos;. Available log categories depend on the specific application, refer to the &apos;logging level&apos; command. Optionally add individual log levels like &apos;abc,1:mno,3:xyz,5&apos;, where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
      </params>
    </command>
    <command id='logging level (rll|cc|mm|rr|rsl|nm|mncc|pag|meas|sccp|msc|mgcp|ho|db|ref|gprs|ns|bssgp|llc|sndcp|nat|ctrl|smpp|filter|ranap|sua|pcu|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='level' doc='Set the log level for a specified category' />
        <param name='rll' doc='A-bis Radio Link Layer (RLL)' />
        <param name='cc' doc='Layer3 Call Control (CC)' />
        <param name='mm' doc='Layer3 Mobility Management (MM)' />
        <param name='rr' doc='Layer3 Radio Resource (RR)' />
        <param name='rsl' doc='A-bis Radio Siganlling Link (RSL)' />
        <param name='nm' doc='A-bis Network Management / O&amp;M (NM/OML)' />
        <param name='mncc' doc='MNCC API for Call Control application' />
        <param name='pag' doc='Paging Subsystem' />
        <param name='meas' doc='Radio Measurement Processing' />
        <param name='sccp' doc='SCCP Protocol' />
        <param name='msc' doc='Mobile Switching Center' />
        <param name='mgcp' doc='Media Gateway Control Protocol' />
        <param name='ho' doc='Hand-Over' />
        <param name='db' doc='Database Layer' />
        <param name='ref' doc='Reference Counting' />
        <param name='gprs' doc='GPRS Packet Service' />
        <param name='ns' doc='GPRS Network Service (NS)' />
        <param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' />
        <param name='llc' doc='GPRS Logical Link Control Protocol (LLC)' />
        <param name='sndcp' doc='GPRS Sub-Network Dependent Control Protocol (SNDCP)' />
        <param name='nat' doc='GSM 08.08 NAT/Multiplexer' />
        <param name='ctrl' doc='Control interface' />
        <param name='smpp' doc='SMPP interface for external SMS apps' />
        <param name='filter' doc='BSC/NAT IMSI based filtering' />
        <param name='ranap' doc='Radio Access Network Application Part Protocol' />
        <param name='sua' doc='SCCP User Adaptation Protocol' />
        <param name='pcu' doc='PCU Interface' />
        <param name='lglobal' doc='Library-internal global log family' />
        <param name='llapd' doc='LAPD in libosmogsm' />
        <param name='linp' doc='A-bis Intput Subsystem' />
        <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
        <param name='lmi' doc='A-bis Input Driver for Signalling' />
        <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
        <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
        <param name='lctrl' doc='Control Interface' />
        <param name='lgtp' doc='GPRS GTP library' />
        <param name='lstats' doc='Statistics messages and logging' />
        <param name='lgsup' doc='Generic Subscriber Update Protocol' />
        <param name='loap' doc='Osmocom Authentication Protocol' />
        <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
        <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
        <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
        <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
        <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
        <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
        <param name='lrspro' doc='Remote SIM protocol' />
        <param name='debug' doc='Log debug messages and higher levels' />
        <param name='info' doc='Log informational messages and higher levels' />
        <param name='notice' doc='Log noticeable messages and higher levels' />
        <param name='error' doc='Log error messages and higher levels' />
        <param name='fatal' doc='Log only fatal messages' />
      </params>
    </command>
    <command id='logging level set-all (debug|info|notice|error|fatal)'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='level' doc='Set the log level for a specified category' />
        <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
        <param name='debug' doc='Log debug messages and higher levels' />
        <param name='info' doc='Log informational messages and higher levels' />
        <param name='notice' doc='Log noticeable messages and higher levels' />
        <param name='error' doc='Log error messages and higher levels' />
        <param name='fatal' doc='Log only fatal messages' />
      </params>
    </command>
    <command id='logging level force-all (debug|info|notice|error|fatal)'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='level' doc='Set the log level for a specified category' />
        <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the &apos;no logging level force-all&apos; command. Note: any &apos;logging level &lt;category&gt; &lt;level&gt;&apos; commands will have no visible effect after this, until the forced level is released.' />
        <param name='debug' doc='Log debug messages and higher levels' />
        <param name='info' doc='Log informational messages and higher levels' />
        <param name='notice' doc='Log noticeable messages and higher levels' />
        <param name='error' doc='Log error messages and higher levels' />
        <param name='fatal' doc='Log only fatal messages' />
      </params>
    </command>
    <command id='no logging level force-all'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='logging' doc='Configure logging' />
        <param name='level' doc='Set the log level for a specified category' />
        <param name='force-all' doc='Release any globally forced log level set with &apos;logging level force-all &lt;level&gt;&apos;' />
      </params>
    </command>
    <command id='show logging vty'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='logging' doc='Show current logging configuration' />
        <param name='vty' doc='Show current logging configuration for this vty' />
      </params>
    </command>
    <command id='show alarms'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='alarms' doc='Show current logging configuration' />
      </params>
    </command>
    <command id='show stats'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='stats' doc='Show statistical values' />
      </params>
    </command>
    <command id='show stats level (global|peer|subscriber)'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='stats' doc='Show statistical values' />
        <param name='level' doc='Set the maximum group level' />
        <param name='global' doc='Show global groups only' />
        <param name='peer' doc='Show global and network peer related groups' />
        <param name='subscriber' doc='Show global, peer, and subscriber groups' />
      </params>
    </command>
    <command id='show asciidoc counters'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='asciidoc' doc='Asciidoc generation' />
        <param name='counters' doc='Generate table of all registered counters' />
      </params>
    </command>
    <command id='show rate-counters'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='rate-counters' doc='Show all rate counters' />
      </params>
    </command>
    <command id='drop bts connection &lt;0-65535&gt; (oml|rsl)'>
      <params>
        <param name='drop' doc='Debug/Simulation command to drop Abis/IP BTS' />
        <param name='bts' doc='Debug/Simulation command to drop Abis/IP BTS' />
        <param name='connection' doc='Debug/Simulation command to drop Abis/IP BTS' />
        <param name='&lt;0-65535&gt;' doc='BTS NR' />
        <param name='oml' doc='Drop OML Connection' />
        <param name='rsl' doc='Drop RSL Connection' />
      </params>
    </command>
    <command id='restart-bts &lt;0-65535&gt;'>
      <params>
        <param name='restart-bts' doc='Restart ip.access nanoBTS through OML' />
        <param name='&lt;0-65535&gt;' doc='BTS Number' />
      </params>
    </command>
    <command id='bts &lt;0-255&gt; resend-system-information'>
      <params>
        <param name='bts' doc='BTS Specific Commands' />
        <param name='&lt;0-255&gt;' doc='BTS Number' />
        <param name='resend-system-information' doc='Re-generate + re-send BCCH SYSTEM INFORMATION' />
      </params>
    </command>
    <command id='bts &lt;0-255&gt; trx &lt;0-255&gt; timeslot &lt;0-7&gt; pdch (activate|deactivate)'>
      <params>
        <param name='bts' doc='BTS related commands' />
        <param name='&lt;0-255&gt;' doc='BTS Number' />
        <param name='trx' doc='Transceiver' />
        <param name='&lt;0-255&gt;' doc='Transceiver Number' />
        <param name='timeslot' doc='TRX Timeslot' />
        <param name='&lt;0-7&gt;' doc='Timeslot Number' />
        <param name='pdch' doc='Packet Data Channel' />
        <param name='activate' doc='Activate Dynamic PDCH/TCH (-&gt; PDCH mode)' />
        <param name='deactivate' doc='Deactivate Dynamic PDCH/TCH (-&gt; TCH mode)' />
      </params>
    </command>
    <command id='bts &lt;0-255&gt; trx &lt;0-255&gt; timeslot &lt;0-7&gt; sub-slot &lt;0-7&gt; (activate|deactivate) (hr|fr|efr|amr) [&lt;0-7&gt;]'>
      <params>
        <param name='bts' doc='BTS related commands' />
        <param name='&lt;0-255&gt;' doc='BTS Number' />
        <param name='trx' doc='Transceiver' />
        <param name='&lt;0-255&gt;' doc='Transceiver Number' />
        <param name='timeslot' doc='TRX Timeslot' />
        <param name='&lt;0-7&gt;' doc='Timeslot Number' />
        <param name='sub-slot' doc='Sub-Slot Number' />
        <param name='&lt;0-7&gt;' doc='Sub-Slot Number' />
        <param name='activate' doc='Manual Channel Activation (e.g. for BER test)' />
        <param name='deactivate' doc='Manual Channel Deactivation (e.g. for BER test)' />
        <param name='hr' doc='Half-Rate v1' />
        <param name='fr' doc='Full-Rate' />
        <param name='efr' doc='Enhanced Full Rate' />
        <param name='amr' doc='Adaptive Multi-Rate' />
        <param name='[&lt;0-7&gt;]' doc='AMR Mode' />
      </params>
    </command>
    <command id='bts &lt;0-255&gt; trx &lt;0-255&gt; timeslot &lt;0-7&gt; sub-slot &lt;0-7&gt; mdcx A.B.C.D &lt;0-65535&gt;'>
      <params>
        <param name='bts' doc='BTS related commands' />
        <param name='&lt;0-255&gt;' doc='BTS Number' />
        <param name='trx' doc='Transceiver' />
        <param name='&lt;0-255&gt;' doc='Transceiver Number' />
        <param name='timeslot' doc='TRX Timeslot' />
        <param name='&lt;0-7&gt;' doc='Timeslot Number' />
        <param name='sub-slot' doc='Sub-Slot' />
        <param name='&lt;0-7&gt;' doc='Sub-Slot Number' />
        <param name='mdcx' doc='Modify RTP Connection' />
        <param name='A.B.C.D' doc='MGW IP Address' />
        <param name='&lt;0-65535&gt;' doc='MGW UDP Port' />
      </params>
    </command>
    <command id='bts &lt;0-255&gt; smscb-command &lt;1-4&gt; HEXSTRING'>
      <params>
        <param name='bts' doc='BTS related commands' />
        <param name='&lt;0-255&gt;' doc='BTS Number' />
        <param name='smscb-command' doc='SMS Cell Broadcast' />
        <param name='&lt;1-4&gt;' doc='Last Valid Block' />
        <param name='HEXSTRING' doc='Hex Encoded SMSCB message (up to 88 octets)' />
      </params>
    </command>
    <command id='ctrl-interface generate-trap TRAP VALUE'>
      <params>
        <param name='ctrl-interface' doc='Commands related to the CTRL Interface' />
        <param name='generate-trap' doc='Generate a TRAP for test purpose' />
        <param name='TRAP' doc='Identity/Name of the TRAP variable' />
        <param name='VALUE' doc='Value of the TRAP variable' />
      </params>
    </command>
    <command id='bts &lt;0-255&gt; oml class (site-manager|bts|radio-carrier|baseband-transceiver|channel|adjc|handover|power-contorl|btse|rack|test|envabtse|bport|gprs-nse|gprs-cell|gprs-nsvc|siemenshw) instance &lt;0-255&gt; &lt;0-255&gt; &lt;0-255&gt;'>
      <params>
        <param name='bts' doc='BTS related commands' />
        <param name='&lt;0-255&gt;' doc='BTS Number' />
        <param name='oml' doc='Manipulate the OML managed objects' />
        <param name='class' doc='Object Class' />
        <param name='site-manager' doc='Site Manager Object' />
        <param name='bts' doc='BTS Object' />
        <param name='radio-carrier' doc='Radio Carrier Object' />
        <param name='baseband-transceiver' doc='Baseband Transceiver Object' />
        <param name='channel' doc='Channel (Timeslot) Object' />
        <param name='adjc' doc='Adjacent Object (Siemens)' />
        <param name='handover' doc='Handover Object (Siemens)' />
        <param name='power-contorl' doc='Power Control Object (Siemens)' />
        <param name='btse' doc='BTSE Object (Siemens)' />
        <param name='rack' doc='Rack Object (Siemens)' />
        <param name='test' doc='Test Object (Siemens)' />
        <param name='envabtse' doc='ENVABTSE Object (Siemens)' />
        <param name='bport' doc='BPORT Object (Siemens)' />
        <param name='gprs-nse' doc='GPRS NSE Object (ip.access/osmo-bts)' />
        <param name='gprs-cell' doc='GPRS Cell Object (ip.acecss/osmo-bts)' />
        <param name='gprs-nsvc' doc='GPRS NSVC Object (ip.acecss/osmo-bts)' />
        <param name='siemenshw' doc='SIEMENSHW Object (Siemens)' />
        <param name='instance' doc='Object Instance' />
        <param name='&lt;0-255&gt;' doc='BTS Number' />
        <param name='&lt;0-255&gt;' doc='TRX Number' />
        <param name='&lt;0-255&gt;' doc='TS Number' />
      </params>
    </command>
    <command id='bts &lt;0-255&gt; oml class &lt;0-255&gt; instance &lt;0-255&gt; &lt;0-255&gt; &lt;0-255&gt;'>
      <params>
        <param name='bts' doc='BTS related commands' />
        <param name='&lt;0-255&gt;' doc='BTS Number' />
        <param name='oml' doc='Manipulate the OML managed objects' />
        <param name='class' doc='Object Class' />        <param name='&lt;0-255&gt;' doc='Object Class' />
        <param name='instance' doc='Object Instance' />
        <param name='&lt;0-255&gt;' doc='BTS Number' />
        <param name='&lt;0-255&gt;' doc='TRX Number' />
        <param name='&lt;0-255&gt;' doc='TS Number' />
      </params>
    </command>
    <command id='bts &lt;0-255&gt; om2000 class (trxc|ts|tf|is|con|dp|cf|tx|rx) &lt;0-255&gt; &lt;0-255&gt; &lt;0-255&gt;'>
      <params>
        <param name='bts' doc='BTS related commands' />
        <param name='&lt;0-255&gt;' doc='BTS Number' />
        <param name='om2000' doc='Manipulate the OM2000 managed objects' />
        <param name='class' doc='Object Class' />
        <param name='trxc' doc='TRX Controller' />
        <param name='ts' doc='Timeslot' />
        <param name='tf' doc='Timing Function' />
        <param name='is' doc='Interface Switch' />
        <param name='con' doc='Abis Concentrator' />
        <param name='dp' doc='Digital Path' />
        <param name='cf' doc='Central Function' />
        <param name='tx' doc='Transmitter' />
        <param name='rx' doc='Receiver' />
        <param name='&lt;0-255&gt;' doc='BTS Number' />
        <param name='&lt;0-255&gt;' doc='Associated SO Instance' />
        <param name='&lt;0-255&gt;' doc='Instance Number' />
      </params>
    </command>
    <command id='bts &lt;0-255&gt; om2000 class &lt;0-255&gt; &lt;0-255&gt; &lt;0-255&gt; &lt;0-255&gt;'>
      <params>
        <param name='bts' doc='BTS related commands' />
        <param name='&lt;0-255&gt;' doc='BTS Number' />
        <param name='om2000' doc='Manipulate the OML managed objects' />
        <param name='class' doc='Object Class' />
        <param name='&lt;0-255&gt;' doc='Object Class' />
        <param name='&lt;0-255&gt;' doc='BTS Number' />
        <param name='&lt;0-255&gt;' doc='Associated SO Instance' />
        <param name='&lt;0-255&gt;' doc='Instance Number' />
      </params>
    </command>
    <command id='show e1_driver'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='e1_driver' doc='Display information about available E1 drivers' />
      </params>
    </command>
    <command id='show e1_line [line_nr] [stats]'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='e1_line' doc='Display information about a E1 line' />
        <param name='[line_nr]' doc='E1 Line Number' />
        <param name='[stats]' doc='Include statistics' />
      </params>
    </command>
    <command id='show e1_timeslot [line_nr] [ts_nr]'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='e1_timeslot' doc='Display information about a E1 timeslot' />
        <param name='[line_nr]' doc='E1 Line Number' />
        <param name='[ts_nr]' doc='E1 Timeslot Number' />
      </params>
    </command>
    <command id='show fsm NAME'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='fsm' doc='Show information about finite state machines' />
        <param name='NAME' doc='Display information about a single named finite state machine' />
      </params>
    </command>
    <command id='show fsm all'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='fsm' doc='Show information about finite state machines' />
        <param name='all' doc='Display a list of all registered finite state machines' />
      </params>
    </command>
    <command id='show fsm-instances NAME'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='fsm-instances' doc='Show information about finite state machine instances' />
        <param name='NAME' doc='Display a list of all FSM instances of the named finite state machine' />
      </params>
    </command>
    <command id='show fsm-instances all'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='fsm-instances' doc='Show information about finite state machine instances' />
        <param name='all' doc='Display a list of all FSM instances of all finite state machine' />
      </params>
    </command>
    <command id='show subscriber (extension|imsi|tmsi|id) ID'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='subscriber' doc='Operations on a Subscriber' />
        <param name='extension' doc='Identify subscriber by extension (phone number)' />
        <param name='imsi' doc='Identify subscriber by IMSI' />
        <param name='tmsi' doc='Identify subscriber by TMSI' />
        <param name='id' doc='Identify subscriber by database ID' />
        <param name='ID' doc='Identifier for the subscriber' />
      </params>
    </command>
    <command id='show subscriber cache'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='subscriber' doc='Show information about subscribers' />
        <param name='cache' doc='Display contents of subscriber cache' />
      </params>
    </command>
    <command id='sms send pending'>
      <params>
        <param name='sms' doc='SMS related commands' />
        <param name='send' doc='SMS Sending related commands' />
        <param name='pending' doc='Send all pending SMS' />
      </params>
    </command>
    <command id='subscriber create imsi ID'>
      <params>
        <param name='subscriber' doc='Operations on a Subscriber' />
        <param name='create' doc='Create new subscriber' />
        <param name='imsi' doc='Identify the subscriber by his IMSI' />
        <param name='ID' doc='Identifier for the subscriber' />
      </params>
    </command>
    <command id='subscriber (extension|imsi|tmsi|id) ID sms sender (extension|imsi|tmsi|id) SENDER_ID send .LINE'>
      <params>
        <param name='subscriber' doc='Operations on a Subscriber' />
        <param name='extension' doc='Identify subscriber by extension (phone number)' />
        <param name='imsi' doc='Identify subscriber by IMSI' />
        <param name='tmsi' doc='Identify subscriber by TMSI' />
        <param name='id' doc='Identify subscriber by database ID' />
        <param name='ID' doc='Identifier for the subscriber' />
        <param name='sms' doc='SMS Operations' />
        <param name='sender' doc='Operations on a Subscriber' />
        <param name='extension' doc='Identify subscriber by extension (phone number)' />
        <param name='imsi' doc='Identify subscriber by IMSI' />
        <param name='tmsi' doc='Identify subscriber by TMSI' />
        <param name='id' doc='Identify subscriber by database ID' />
        <param name='SENDER_ID' doc='Identifier for the subscriber' />
        <param name='send' doc='Send SMS' />
        <param name='.LINE' doc='Actual SMS Text' />
      </params>
    </command>
    <command id='subscriber (extension|imsi|tmsi|id) ID silent-sms sender (extension|imsi|tmsi|id) SENDER_ID send .LINE'>
      <params>
        <param name='subscriber' doc='Operations on a Subscriber' />
        <param name='extension' doc='Identify subscriber by extension (phone number)' />
        <param name='imsi' doc='Identify subscriber by IMSI' />
        <param name='tmsi' doc='Identify subscriber by TMSI' />
        <param name='id' doc='Identify subscriber by database ID' />
        <param name='ID' doc='Identifier for the subscriber' />
        <param name='silent-sms' doc='Silent SMS Operations' />
        <param name='sender' doc='Operations on a Subscriber' />
        <param name='extension' doc='Identify subscriber by extension (phone number)' />
        <param name='imsi' doc='Identify subscriber by IMSI' />
        <param name='tmsi' doc='Identify subscriber by TMSI' />
        <param name='id' doc='Identify subscriber by database ID' />
        <param name='SENDER_ID' doc='Identifier for the subscriber' />
        <param name='send' doc='Send SMS' />
        <param name='.LINE' doc='Actual SMS Text' />
      </params>
    </command>
    <command id='subscriber (extension|imsi|tmsi|id) ID silent-call start (any|tch/f|tch/any|sdcch)'>
      <params>
        <param name='subscriber' doc='Operations on a Subscriber' />
        <param name='extension' doc='Identify subscriber by extension (phone number)' />
        <param name='imsi' doc='Identify subscriber by IMSI' />
        <param name='tmsi' doc='Identify subscriber by TMSI' />
        <param name='id' doc='Identify subscriber by database ID' />
        <param name='ID' doc='Identifier for the subscriber' />
        <param name='silent-call' doc='Silent call operation' />
        <param name='start' doc='Start silent call' />
        <param name='any' doc='Any channel' />
        <param name='tch/f' doc='TCH/F channel' />
        <param name='tch/any' doc='Any TCH channel' />
        <param name='sdcch' doc='SDCCH channel' />
      </params>
    </command>
    <command id='subscriber (extension|imsi|tmsi|id) ID silent-call stop'>
      <params>
        <param name='subscriber' doc='Operations on a Subscriber' />
        <param name='extension' doc='Identify subscriber by extension (phone number)' />
        <param name='imsi' doc='Identify subscriber by IMSI' />
        <param name='tmsi' doc='Identify subscriber by TMSI' />
        <param name='id' doc='Identify subscriber by database ID' />
        <param name='ID' doc='Identifier for the subscriber' />
        <param name='silent-call' doc='Silent call operation' />
        <param name='stop' doc='Stop silent call' />
      </params>
    </command>
    <command id='subscriber (extension|imsi|tmsi|id) ID ussd-notify (0|1|2) .TEXT'>
      <params>
        <param name='subscriber' doc='Operations on a Subscriber' />
        <param name='extension' doc='Identify subscriber by extension (phone number)' />
        <param name='imsi' doc='Identify subscriber by IMSI' />
        <param name='tmsi' doc='Identify subscriber by TMSI' />
        <param name='id' doc='Identify subscriber by database ID' />
        <param name='ID' doc='Identifier for the subscriber' />
        <param name='ussd-notify' doc='Send a USSD notify to the subscriber' />
        <param name='0' doc='Alerting Level 0' />
        <param name='1' doc='Alerting Level 1' />
        <param name='2' doc='Alerting Level 2' />
        <param name='.TEXT' doc='Text of USSD message to send' />
      </params>
    </command>
    <command id='subscriber (extension|imsi|tmsi|id) ID ms-test close-loop (a|b|c|d|e|f|i)'>
      <params>
        <param name='subscriber' doc='Operations on a Subscriber' />
        <param name='extension' doc='Identify subscriber by extension (phone number)' />
        <param name='imsi' doc='Identify subscriber by IMSI' />
        <param name='tmsi' doc='Identify subscriber by TMSI' />
        <param name='id' doc='Identify subscriber by database ID' />
        <param name='ID' doc='Identifier for the subscriber' />
        <param name='ms-test' doc='Send a TS 04.14 MS Test Command to subscriber' />
        <param name='close-loop' doc='Close a TCH Loop inside the MS' />
        <param name='a' doc='Loop Type A' />
        <param name='b' doc='Loop Type B' />
        <param name='c' doc='Loop Type C' />
        <param name='d' doc='Loop Type D' />
        <param name='e' doc='Loop Type E' />
        <param name='f' doc='Loop Type F' />
        <param name='i' doc='Loop Type I' />
      </params>
    </command>
    <command id='subscriber (extension|imsi|tmsi|id) ID ms-test open-loop'>
      <params>
        <param name='subscriber' doc='Operations on a Subscriber' />
        <param name='extension' doc='Identify subscriber by extension (phone number)' />
        <param name='imsi' doc='Identify subscriber by IMSI' />
        <param name='tmsi' doc='Identify subscriber by TMSI' />
        <param name='id' doc='Identify subscriber by database ID' />
        <param name='ID' doc='Identifier for the subscriber' />        <param name='ms-test' doc='Send a TS 04.14 MS Test Command to subscriber' />
        <param name='open-loop' doc='Open a TCH Loop inside the MS' />
      </params>
    </command>
    <command id='subscriber (extension|imsi|tmsi|id) ID update'>
      <params>
        <param name='subscriber' doc='Operations on a Subscriber' />
        <param name='extension' doc='Identify subscriber by extension (phone number)' />
        <param name='imsi' doc='Identify subscriber by IMSI' />
        <param name='tmsi' doc='Identify subscriber by TMSI' />
        <param name='id' doc='Identify subscriber by database ID' />
        <param name='ID' doc='Identifier for the subscriber' />
        <param name='update' doc='Update the subscriber data from the dabase.' />
      </params>
    </command>
    <command id='show statistics'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='statistics' doc='Display network statistics' />
      </params>
    </command>
    <command id='show sms-queue'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='sms-queue' doc='Display SMSqueue statistics' />
      </params>
    </command>
    <command id='logging filter imsi IMSI'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='filter' doc='Filter log messages' />
        <param name='imsi' doc='Filter log messages by IMSI' />
        <param name='IMSI' doc='IMSI to be used as filter' />
      </params>
    </command>
    <command id='subscriber (extension|imsi|tmsi|id) ID delete'>
      <params>
        <param name='subscriber' doc='Operations on a Subscriber' />
        <param name='extension' doc='Identify subscriber by extension (phone number)' />
        <param name='imsi' doc='Identify subscriber by IMSI' />
        <param name='tmsi' doc='Identify subscriber by TMSI' />
        <param name='id' doc='Identify subscriber by database ID' />
        <param name='ID' doc='Identifier for the subscriber' />
        <param name='delete' doc='Delete subscriber in HLR' />
      </params>
    </command>
    <command id='subscriber (extension|imsi|tmsi|id) ID expire'>
      <params>
        <param name='subscriber' doc='Operations on a Subscriber' />
        <param name='extension' doc='Identify subscriber by extension (phone number)' />
        <param name='imsi' doc='Identify subscriber by IMSI' />
        <param name='tmsi' doc='Identify subscriber by TMSI' />
        <param name='id' doc='Identify subscriber by database ID' />
        <param name='ID' doc='Identifier for the subscriber' />
        <param name='expire' doc='Expire the subscriber Now' />
      </params>
    </command>
    <command id='subscriber (extension|imsi|tmsi|id) ID name .NAME'>
      <params>
        <param name='subscriber' doc='Operations on a Subscriber' />
        <param name='extension' doc='Identify subscriber by extension (phone number)' />
        <param name='imsi' doc='Identify subscriber by IMSI' />
        <param name='tmsi' doc='Identify subscriber by TMSI' />
        <param name='id' doc='Identify subscriber by database ID' />
        <param name='ID' doc='Identifier for the subscriber' />
        <param name='name' doc='Set the name of the subscriber' />
        <param name='.NAME' doc='Name of the Subscriber' />
      </params>
    </command>
    <command id='subscriber (extension|imsi|tmsi|id) ID extension EXTENSION'>
      <params>
        <param name='subscriber' doc='Operations on a Subscriber' />
        <param name='extension' doc='Identify subscriber by extension (phone number)' />
        <param name='imsi' doc='Identify subscriber by IMSI' />
        <param name='tmsi' doc='Identify subscriber by TMSI' />
        <param name='id' doc='Identify subscriber by database ID' />
        <param name='ID' doc='Identifier for the subscriber' />
        <param name='extension' doc='Set the extension (phone number) of the subscriber' />
        <param name='EXTENSION' doc='Extension (phone number)' />
      </params>
    </command>
    <command id='subscriber (extension|imsi|tmsi|id) ID authorized (0|1)'>
      <params>
        <param name='subscriber' doc='Operations on a Subscriber' />
        <param name='extension' doc='Identify subscriber by extension (phone number)' />
        <param name='imsi' doc='Identify subscriber by IMSI' />
        <param name='tmsi' doc='Identify subscriber by TMSI' />
        <param name='id' doc='Identify subscriber by database ID' />
        <param name='ID' doc='Identifier for the subscriber' />
        <param name='authorized' doc='(De-)Authorize subscriber in HLR' />
        <param name='0' doc='Subscriber should NOT be authorized' />
        <param name='1' doc='Subscriber should be authorized' />
      </params>
    </command>
    <command id='subscriber (extension|imsi|tmsi|id) ID a3a8 (none|xor|comp128v1|comp128v2|comp128v3) [KI]'>
      <params>
        <param name='subscriber' doc='Operations on a Subscriber' />
        <param name='extension' doc='Identify subscriber by extension (phone number)' />
        <param name='imsi' doc='Identify subscriber by IMSI' />
        <param name='tmsi' doc='Identify subscriber by TMSI' />
        <param name='id' doc='Identify subscriber by database ID' />
        <param name='ID' doc='Identifier for the subscriber' />
        <param name='a3a8' doc='Set a3a8 parameters for the subscriber' />
        <param name='none' doc='Use No A3A8 algorithm' />
        <param name='xor' doc='Use XOR algorithm' />
        <param name='comp128v1' doc='Use COMP128v1 algorithm' />
        <param name='comp128v2' doc='Use COMP128v2 algorithm' />
        <param name='comp128v3' doc='Use COMP128v3 algorithm' />
        <param name='[KI]' doc='Encryption Key Ki' />
      </params>
    </command>
    <command id='subscriber (extension|imsi|tmsi|id) ID handover BTS_NR'>
      <params>
        <param name='subscriber' doc='Operations on a Subscriber' />
        <param name='extension' doc='Identify subscriber by extension (phone number)' />
        <param name='imsi' doc='Identify subscriber by IMSI' />
        <param name='tmsi' doc='Identify subscriber by TMSI' />
        <param name='id' doc='Identify subscriber by database ID' />
        <param name='ID' doc='Identifier for the subscriber' />
        <param name='handover' doc='Handover the active connection' />
        <param name='BTS_NR' doc='Number of the BTS to handover to' />
      </params>
    </command>
    <command id='subscriber purge-inactive'>
      <params>
        <param name='subscriber' doc='Operations on a Subscriber' />
        <param name='purge-inactive' doc='Purge subscribers with a zero use count.' />
      </params>
    </command>
    <command id='sms-queue trigger'>
      <params>
        <param name='sms-queue' doc='SMS Queue' />
        <param name='trigger' doc='Trigger sending messages' />
      </params>
    </command>
    <command id='sms-queue max-pending &lt;1-500&gt;'>
      <params>
        <param name='sms-queue' doc='SMS Queue' />
        <param name='max-pending' doc='SMS to deliver in parallel' />
        <param name='&lt;1-500&gt;' doc='Amount' />
      </params>
    </command>
    <command id='sms-queue clear'>
      <params>
        <param name='sms-queue' doc='SMS Queue' />
        <param name='clear' doc='Clear the queue of pending SMS' />
      </params>
    </command>
    <command id='sms-queue max-failure &lt;1-500&gt;'>
      <params>
        <param name='sms-queue' doc='SMS Queue' />
        <param name='max-failure' doc='Maximum amount of delivery failures' />
        <param name='&lt;1-500&gt;' doc='Amount' />
      </params>
    </command>
    <command id='subscriber (extension|imsi|tmsi|id) ID sms pending-send'>
      <params>
        <param name='subscriber' doc='Operations on a Subscriber' />
        <param name='extension' doc='Identify subscriber by extension (phone number)' />
        <param name='imsi' doc='Identify subscriber by IMSI' />
        <param name='tmsi' doc='Identify subscriber by TMSI' />
        <param name='id' doc='Identify subscriber by database ID' />
        <param name='ID' doc='Identifier for the subscriber' />
        <param name='sms' doc='SMS Operations' />
        <param name='pending-send' doc='Send pending SMS' />
      </params>
    </command>
    <command id='meas-feed scenario NAME'>
      <params>
        <param name='meas-feed' doc='Measurement export related' />
        <param name='scenario' doc='scenario' />
        <param name='NAME' doc='Name up to 31 characters included in report' />
      </params>
    </command>
    <command id='show smpp esme'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='smpp' doc='SMPP Interface' />
        <param name='esme' doc='SMPP External SMS Entity' />
      </params>
    </command>
  </node>
  <node id='config'>
    <name>config</name>
    <command id='hostname WORD'>
      <params>
        <param name='hostname' doc='Set system&apos;s network name' />
        <param name='WORD' doc='This system&apos;s network name' />
      </params>
    </command>
    <command id='no hostname [HOSTNAME]'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='hostname' doc='Reset system&apos;s network name' />
        <param name='[HOSTNAME]' doc='Host name of this router' />
      </params>
    </command>
    <command id='password (8|) WORD'>
      <params>
        <param name='password' doc='Assign the terminal connection password' />
        <param name='8' doc='Specifies a HIDDEN password will follow' />
        <param name='' doc='dummy string ' />
        <param name='WORD' doc='The HIDDEN line password string' />
      </params>
    </command>
    <command id='password LINE'>
      <params>
        <param name='password' doc='Assign the terminal connection password' />
        <param name='LINE' doc='The UNENCRYPTED (cleartext) line password' />
      </params>
    </command>
    <command id='enable password (8|) WORD'>
      <params>
        <param name='enable' doc='Modify enable password parameters' />
        <param name='password' doc='Assign the privileged level password' />
        <param name='8' doc='Specifies a HIDDEN password will follow' />
        <param name='' doc='dummy string ' />
        <param name='WORD' doc='The HIDDEN &apos;enable&apos; password string' />
      </params>
    </command>
    <command id='enable password LINE'>
      <params>
        <param name='enable' doc='Modify enable password parameters' />
        <param name='password' doc='Assign the privileged level password' />
        <param name='LINE' doc='The UNENCRYPTED (cleartext) &apos;enable&apos; password' />
      </params>
    </command>
    <command id='no enable password'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='enable' doc='Modify enable password parameters' />
        <param name='password' doc='Assign the privileged level password' />
      </params>
    </command>
    <command id='banner motd default'>
      <params>
        <param name='banner' doc='Set banner string' />
        <param name='motd' doc='Strings for motd' />
        <param name='default' doc='Default string' />
      </params>
    </command>
    <command id='banner motd file [FILE]'>
      <params>
        <param name='banner' doc='Set banner' />
        <param name='motd' doc='Banner for motd' />
        <param name='file' doc='Banner from a file' />
        <param name='[FILE]' doc='Filename' />
      </params>
    </command>
    <command id='no banner motd'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='banner' doc='Set banner string' />
        <param name='motd' doc='Strings for motd' />
      </params>
    </command>
    <command id='service terminal-length &lt;0-512&gt;'>
      <params>
        <param name='service' doc='Set up miscellaneous service' />
        <param name='terminal-length' doc='System wide terminal length configuration' />
        <param name='&lt;0-512&gt;' doc='Number of lines of VTY (0 means no line control)' />
      </params>
    </command>
    <command id='no service terminal-length [&lt;0-512&gt;]'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='service' doc='Set up miscellaneous service' />
        <param name='terminal-length' doc='System wide terminal length configuration' />
        <param name='[&lt;0-512&gt;]' doc='Number of lines of VTY (0 means no line control)' />
      </params>
    </command>
    <command id='line vty'>
      <params>
        <param name='line' doc='Configure a terminal line' />
        <param name='vty' doc='Virtual terminal' />
      </params>
    </command>
    <command id='service advanced-vty'>
      <params>
        <param name='service' doc='Set up miscellaneous service' />
        <param name='advanced-vty' doc='Enable advanced mode vty interface' />
      </params>
    </command>
    <command id='no service advanced-vty'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='service' doc='Set up miscellaneous service' />
        <param name='advanced-vty' doc='Enable advanced mode vty interface' />
      </params>
    </command>
    <command id='show history'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='history' doc='Display the session command history' />
      </params>
    </command>
    <command id='network'>
      <params>
        <param name='network' doc='Configure the GSM network' />
      </params>
    </command>
    <command id='log stderr'>
      <params>
        <param name='log' doc='Configure logging sub-system' />
        <param name='stderr' doc='Logging via STDERR of the process' />
      </params>
    </command>
    <command id='no log stderr'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='log' doc='Configure logging sub-system' />
        <param name='stderr' doc='Logging via STDERR of the process' />
      </params>
    </command>
    <command id='log file .FILENAME'>
      <params>
        <param name='log' doc='Configure logging sub-system' />
        <param name='file' doc='Logging to text file' />
        <param name='.FILENAME' doc='Filename' />
      </params>
    </command>
    <command id='no log file .FILENAME'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='log' doc='Configure logging sub-system' />
        <param name='file' doc='Logging to text file' />
        <param name='.FILENAME' doc='Filename' />
      </params>
    </command>
    <command id='log alarms &lt;2-32700&gt;'>
      <params>
        <param name='log' doc='Configure logging sub-system' />
        <param name='alarms' doc='Logging alarms to osmo_strrb' />
        <param name='&lt;2-32700&gt;' doc='Maximum number of messages to log' />
      </params>
    </command>
    <command id='no log alarms'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='log' doc='Configure logging sub-system' />
        <param name='alarms' doc='Logging alarms to osmo_strrb' />
      </params>
    </command>
    <command id='log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)'>
      <params>
        <param name='log' doc='Configure logging sub-system' />
        <param name='syslog' doc='Logging via syslog' />
        <param name='authpriv' doc='Security/authorization messages facility' />
        <param name='cron' doc='Clock daemon (cron/at) facility' />
        <param name='daemon' doc='General system daemon facility' />
        <param name='ftp' doc='Ftp daemon facility' />
        <param name='lpr' doc='Line printer facility' />
        <param name='mail' doc='Mail facility' />
        <param name='news' doc='News facility' />
        <param name='user' doc='Generic facility' />
        <param name='uucp' doc='UUCP facility' />
      </params>
    </command>
    <command id='log syslog local &lt;0-7&gt;'>
      <params>
        <param name='log' doc='Configure logging sub-system' />
        <param name='syslog' doc='Logging via syslog' />
        <param name='local' doc='Syslog LOCAL facility' />
        <param name='&lt;0-7&gt;' doc='Local facility number' />
      </params>
    </command>
    <command id='no log syslog'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='log' doc='Configure logging sub-system' />
        <param name='syslog' doc='Logging via syslog' />
      </params>
    </command>
    <command id='log gsmtap [HOSTNAME]'>
      <params>
        <param name='log' doc='Configure logging sub-system' />
        <param name='gsmtap' doc='Logging via GSMTAP' />
        <param name='[HOSTNAME]' doc='Host name to send the GSMTAP logging to (UDP port 4729)' />
      </params>
    </command>
    <command id='stats reporter statsd'>
      <params>
        <param name='stats' doc='Configure stats sub-system' />
        <param name='reporter' doc='Configure a stats reporter' />
        <param name='statsd' doc='Report to a STATSD server' />
      </params>
    </command>
    <command id='no stats reporter statsd'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='stats' doc='Configure stats sub-system' />
        <param name='reporter' doc='Configure a stats reporter' />
        <param name='statsd' doc='Report to a STATSD server' />
      </params>
    </command>
    <command id='stats reporter log'>
      <params>
        <param name='stats' doc='Configure stats sub-system' />
        <param name='reporter' doc='Configure a stats reporter' />
        <param name='log' doc='Report to the logger' />
      </params>
    </command>
    <command id='no stats reporter log'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='stats' doc='Configure stats sub-system' />
        <param name='reporter' doc='Configure a stats reporter' />
        <param name='log' doc='Report to the logger' />
      </params>
    </command>
    <command id='stats interval &lt;1-65535&gt;'>
      <params>
        <param name='stats' doc='Configure stats sub-system' />
        <param name='interval' doc='Set the reporting interval' />
        <param name='&lt;1-65535&gt;' doc='Interval in seconds' />
      </params>
    </command>
    <command id='e1_input'>
      <params>
        <param name='e1_input' doc='Configure E1/T1/J1 TDM input' />
      </params>
    </command>
    <command id='mncc-int'>
      <params>
        <param name='mncc-int' doc='Configure internal MNCC handler' />
      </params>
    </command>
    <command id='nitb'>
      <params>
        <param name='nitb' doc='Configure NITB options' />
      </params>
    </command>
    <command id='ctrl'>
      <params>
        <param name='ctrl' doc='Configure the Control Interface' />
      </params>
    </command>
    <command id='smpp'>
      <params>
        <param name='smpp' doc='Configure SMPP SMS Interface' />
      </params>
    </command>
  </node>
  <node id='config-log'>
    <name>config-log</name>
    <command id='logging filter all (0|1)'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='filter' doc='Filter log messages' />
        <param name='all' doc='Do you want to log all messages?' />
        <param name='0' doc='Only print messages matched by other filters' />
        <param name='1' doc='Bypass filter and print all messages' />
      </params>
    </command>
    <command id='logging color (0|1)'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='color' doc='Configure color-printing for log messages' />
        <param name='0' doc='Don&apos;t use color for printing messages' />
        <param name='1' doc='Use color for printing messages' />
      </params>
    </command>
    <command id='logging timestamp (0|1)'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='timestamp' doc='Configure log message timestamping' />
        <param name='0' doc='Don&apos;t prefix each log message' />
        <param name='1' doc='Prefix each log message with current timestamp' />
      </params>
    </command>
    <command id='logging print extended-timestamp (0|1)'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='print' doc='Log output settings' />
        <param name='extended-timestamp' doc='Configure log message timestamping' />
        <param name='0' doc='Don&apos;t prefix each log message' />
        <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
      </params>
    </command>
    <command id='logging print category (0|1)'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='print' doc='Log output settings' />
        <param name='category' doc='Configure log message' />
        <param name='0' doc='Don&apos;t prefix each log message' />
        <param name='1' doc='Prefix each log message with category/subsystem name' />
      </params>
    </command>
    <command id='logging print category-hex (0|1)'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='print' doc='Log output settings' />
        <param name='category-hex' doc='Configure log message' />
        <param name='0' doc='Don&apos;t prefix each log message' />
        <param name='1' doc='Prefix each log message with category/subsystem nr in hex (&apos;&lt;000b&gt;&apos;)' />
      </params>
    </command>
    <command id='logging print level (0|1)'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='print' doc='Log output settings' />
        <param name='level' doc='Configure log message' />
        <param name='0' doc='Don&apos;t prefix each log message' />
        <param name='1' doc='Prefix each log message with the log level name' />
      </params>
    </command>
    <command id='logging print file (0|1|basename) [last]'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='print' doc='Log output settings' />
        <param name='file' doc='Configure log message' />
        <param name='0' doc='Don&apos;t prefix each log message' />
        <param name='1' doc='Prefix each log message with the source file and line' />
        <param name='basename' doc='Prefix each log message with the source file&apos;s basename (strip leading paths) and line' />
        <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
      </params>
    </command>
    <command id='logging level (rll|cc|mm|rr|rsl|nm|mncc|pag|meas|sccp|msc|mgcp|ho|db|ref|gprs|ns|bssgp|llc|sndcp|nat|ctrl|smpp|filter|ranap|sua|pcu|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='level' doc='Set the log level for a specified category' />
        <param name='rll' doc='A-bis Radio Link Layer (RLL)' />
        <param name='cc' doc='Layer3 Call Control (CC)' />
        <param name='mm' doc='Layer3 Mobility Management (MM)' />
        <param name='rr' doc='Layer3 Radio Resource (RR)' />
        <param name='rsl' doc='A-bis Radio Siganlling Link (RSL)' />
        <param name='nm' doc='A-bis Network Management / O&amp;M (NM/OML)' />
        <param name='mncc' doc='MNCC API for Call Control application' />
        <param name='pag' doc='Paging Subsystem' />
        <param name='meas' doc='Radio Measurement Processing' />
        <param name='sccp' doc='SCCP Protocol' />
        <param name='msc' doc='Mobile Switching Center' />
        <param name='mgcp' doc='Media Gateway Control Protocol' />
        <param name='ho' doc='Hand-Over' />
        <param name='db' doc='Database Layer' />
        <param name='ref' doc='Reference Counting' />
        <param name='gprs' doc='GPRS Packet Service' />
        <param name='ns' doc='GPRS Network Service (NS)' />
        <param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' />
        <param name='llc' doc='GPRS Logical Link Control Protocol (LLC)' />
        <param name='sndcp' doc='GPRS Sub-Network Dependent Control Protocol (SNDCP)' />
        <param name='nat' doc='GSM 08.08 NAT/Multiplexer' />
        <param name='ctrl' doc='Control interface' />
        <param name='smpp' doc='SMPP interface for external SMS apps' />
        <param name='filter' doc='BSC/NAT IMSI based filtering' />
        <param name='ranap' doc='Radio Access Network Application Part Protocol' />
        <param name='sua' doc='SCCP User Adaptation Protocol' />
        <param name='pcu' doc='PCU Interface' />
        <param name='lglobal' doc='Library-internal global log family' />
        <param name='llapd' doc='LAPD in libosmogsm' />
        <param name='linp' doc='A-bis Intput Subsystem' />
        <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
        <param name='lmi' doc='A-bis Input Driver for Signalling' />
        <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
        <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
        <param name='lctrl' doc='Control Interface' />
        <param name='lgtp' doc='GPRS GTP library' />
        <param name='lstats' doc='Statistics messages and logging' />
        <param name='lgsup' doc='Generic Subscriber Update Protocol' />
        <param name='loap' doc='Osmocom Authentication Protocol' />
        <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
        <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
        <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
        <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
        <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
        <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
        <param name='lrspro' doc='Remote SIM protocol' />
        <param name='debug' doc='Log debug messages and higher levels' />
        <param name='info' doc='Log informational messages and higher levels' />
        <param name='notice' doc='Log noticeable messages and higher levels' />
        <param name='error' doc='Log error messages and higher levels' />
        <param name='fatal' doc='Log only fatal messages' />
      </params>
    </command>
    <command id='logging level set-all (debug|info|notice|error|fatal)'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='level' doc='Set the log level for a specified category' />
        <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
        <param name='debug' doc='Log debug messages and higher levels' />
        <param name='info' doc='Log informational messages and higher levels' />
        <param name='notice' doc='Log noticeable messages and higher levels' />
        <param name='error' doc='Log error messages and higher levels' />
        <param name='fatal' doc='Log only fatal messages' />
      </params>
    </command>
    <command id='logging level force-all (debug|info|notice|error|fatal)'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='level' doc='Set the log level for a specified category' />
        <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the &apos;no logging level force-all&apos; command. Note: any &apos;logging level &lt;category&gt; &lt;level&gt;&apos; commands will have no visible effect after this, until the forced level is released.' />
        <param name='debug' doc='Log debug messages and higher levels' />
        <param name='info' doc='Log informational messages and higher levels' />
        <param name='notice' doc='Log noticeable messages and higher levels' />
        <param name='error' doc='Log error messages and higher levels' />
        <param name='fatal' doc='Log only fatal messages' />
      </params>
    </command>
    <command id='no logging level force-all'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='logging' doc='Configure logging' />
        <param name='level' doc='Set the log level for a specified category' />
        <param name='force-all' doc='Release any globally forced log level set with &apos;logging level force-all &lt;level&gt;&apos;' />
      </params>
    </command>
    <command id='logging filter imsi IMSI'>
      <params>
        <param name='logging' doc='Configure logging' />
        <param name='filter' doc='Filter log messages' />
        <param name='imsi' doc='Filter log messages by IMSI' />
        <param name='IMSI' doc='IMSI to be used as filter' />
      </params>
    </command>
  </node>
  <node id='config-stats'>
    <name>config-stats</name>
    <command id='local-ip ADDR'>
      <params>
        <param name='local-ip' doc='Set the IP address to which we bind locally' />
        <param name='ADDR' doc='IP Address' />
      </params>
    </command>
    <command id='no local-ip'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='local-ip' doc='Set the IP address to which we bind locally' />
      </params>
    </command>
    <command id='remote-ip ADDR'>
      <params>
        <param name='remote-ip' doc='Set the remote IP address to which we connect' />
        <param name='ADDR' doc='IP Address' />
      </params>
    </command>
    <command id='remote-port &lt;1-65535&gt;'>
      <params>
        <param name='remote-port' doc='Set the remote port to which we connect' />
        <param name='&lt;1-65535&gt;' doc='Remote port number' />
      </params>
    </command>
    <command id='mtu &lt;100-65535&gt;'>
      <params>
        <param name='mtu' doc='Set the maximum packet size' />
        <param name='&lt;100-65535&gt;' doc='Size in byte' />
      </params>
    </command>
    <command id='no mtu'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='mtu' doc='Set the maximum packet size' />
      </params>
    </command>
    <command id='prefix PREFIX'>
      <params>
        <param name='prefix' doc='Set the item name prefix' />
        <param name='PREFIX' doc='The prefix string' />
      </params>
    </command>
    <command id='no prefix'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='prefix' doc='Set the item name prefix' />
      </params>
    </command>
    <command id='level (global|peer|subscriber)'>
      <params>
        <param name='level' doc='Set the maximum group level' />
        <param name='global' doc='Report global groups only' />
        <param name='peer' doc='Report global and network peer related groups' />
        <param name='subscriber' doc='Report global, peer, and subscriber groups' />
      </params>
    </command>
    <command id='enable'>
      <params>
        <param name='enable' doc='Enable the reporter' />
      </params>
    </command>
    <command id='disable'>
      <params>
        <param name='disable' doc='Disable the reporter' />
      </params>
    </command>
  </node>
  <node id='config-line'>
    <name>config-line</name>
    <command id='login'>
      <params>
        <param name='login' doc='Enable password checking' />
      </params>
    </command>
    <command id='no login'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='login' doc='Enable password checking' />
      </params>
    </command>
    <command id='bind A.B.C.D [&lt;0-65535&gt;]'>
      <params>
        <param name='bind' doc='Accept VTY telnet connections on local interface' />
        <param name='A.B.C.D' doc='Local interface IP address (default: 127.0.0.1)' />
        <param name='[&lt;0-65535&gt;]' doc='Local TCP port number' />
      </params>
    </command>
  </node>
  <node id='config-e1_input'>
    <name>config-e1_input</name>
    <command id='e1_line &lt;0-255&gt; driver (misdn|misdn_lapd|dahdi|ipa|unixsocket)'>
      <params>
        <param name='e1_line' doc='Configure E1/T1/J1 Line' />
        <param name='&lt;0-255&gt;' doc='Line Number' />
        <param name='driver' doc='Set driver for this line' />
        <param name='misdn' doc='mISDN supported E1 Card (kernel LAPD)' />
        <param name='misdn_lapd' doc='mISDN supported E1 Card (userspace LAPD)' />
        <param name='dahdi' doc='DAHDI supported E1/T1/J1 Card' />
        <param name='ipa' doc='IPA TCP/IP input' />
        <param name='unixsocket' doc='HSL TCP/IP input' />
      </params>
    </command>
    <command id='e1_line &lt;0-255&gt; port &lt;0-255&gt;'>
      <params>
        <param name='e1_line' doc='Configure E1/T1/J1 Line' />
        <param name='&lt;0-255&gt;' doc='Line Number' />
        <param name='port' doc='Set physical port/span/card number' />
        <param name='&lt;0-255&gt;' doc='E1/T1 Port/Span/Card number' />
      </params>
    </command>
    <command id='e1_line &lt;0-255&gt; socket .SOCKET'>
      <params>
        <param name='e1_line' doc='Configure E1/T1/J1 Line' />
        <param name='&lt;0-255&gt;' doc='Line Number' />
        <param name='socket' doc='Set socket path for unixsocket' />
        <param name='.SOCKET' doc='socket path' />
      </params>
    </command>
    <command id='e1_line &lt;0-255&gt; name .LINE'>
      <params>
        <param name='e1_line' doc='Configure E1/T1/J1 Line' />
        <param name='&lt;0-255&gt;' doc='Line Number' />
        <param name='name' doc='Set name for this line' />
        <param name='.LINE' doc='Human readable name' />
      </params>
    </command>
    <command id='e1_line &lt;0-255&gt; keepalive'>
      <params>
        <param name='e1_line' doc='Configure E1/T1/J1 Line' />
        <param name='&lt;0-255&gt;' doc='Line Number' />
        <param name='keepalive' doc='Enable keep-alive probing' />
      </params>
    </command>
    <command id='e1_line &lt;0-255&gt; keepalive &lt;1-300&gt; &lt;1-20&gt; &lt;1-300&gt;'>
      <params>
        <param name='e1_line' doc='Configure E1/T1/J1 Line' />
        <param name='&lt;0-255&gt;' doc='Line Number' />
        <param name='keepalive' doc='Enable keep-alive probing' />
        <param name='&lt;1-300&gt;' doc='Idle interval in seconds before probes are sent' />
        <param name='&lt;1-20&gt;' doc='Number of probes to sent' />
        <param name='&lt;1-300&gt;' doc='Delay between probe packets in seconds' />
      </params>
    </command>
    <command id='no e1_line &lt;0-255&gt; keepalive'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='e1_line' doc='Configure E1/T1/J1 Line' />
        <param name='&lt;0-255&gt;' doc='Line Number' />
        <param name='keepalive' doc='Enable keep-alive probing' />
      </params>
    </command>
    <command id='ipa bind A.B.C.D'>
      <params>
        <param name='ipa' doc='ipa driver config' />
        <param name='bind' doc='Set ipa local bind address' />
        <param name='A.B.C.D' doc='Listen on this IP address (default 0.0.0.0)' />
      </params>
    </command>
  </node>
  <node id='config-ctrl'>
    <name>config-ctrl</name>
    <command id='bind A.B.C.D'>
      <params>
        <param name='bind' doc='Set bind address to listen for Control connections' />
        <param name='A.B.C.D' doc='Local IP address (default 127.0.0.1)' />
      </params>
    </command>
  </node>
  <node id='config-net'>
    <name>config-net</name>
    <command id='network country code &lt;1-999&gt;'>
      <params>
        <param name='network' doc='Set the GSM network country code' />
        <param name='country' doc='Country commands' />
        <param name='code' doc='Code commands' />
        <param name='&lt;1-999&gt;' doc='Network Country Code to use' />
      </params>
    </command>
    <command id='mobile network code &lt;0-999&gt;'>
      <params>
        <param name='mobile' doc='Set the GSM mobile network code' />
        <param name='network' doc='Network Commands' />
        <param name='code' doc='Code commands' />
        <param name='&lt;0-999&gt;' doc='Mobile Network Code to use' />
      </params>
    </command>
    <command id='short name NAME'>
      <params>
        <param name='short' doc='Set the short GSM network name' />
        <param name='name' doc='Name Commands' />
        <param name='NAME' doc='Name to use' />
      </params>
    </command>
    <command id='long name NAME'>
      <params>
        <param name='long' doc='Set the long GSM network name' />
        <param name='name' doc='Name Commands' />
        <param name='NAME' doc='Name to use' />
      </params>
    </command>
    <command id='auth policy (closed|accept-all|regexp|token)'>
      <params>
        <param name='auth' doc='Authentication (not cryptographic)' />
        <param name='policy' doc='Set the GSM network authentication policy' />
        <param name='closed' doc='Require the MS to be activated in HLR' />
        <param name='accept-all' doc='Accept all MS, whether in HLR or not' />
        <param name='regexp' doc='Use regular expression for IMSI authorization decision' />
        <param name='token' doc='Use SMS-token based authentication' />
      </params>
    </command>
    <command id='authorized-regexp REGEXP'>
      <params>
        <param name='authorized-regexp' doc='Set regexp for IMSI which will be used for authorization decision' />
        <param name='REGEXP' doc='Regular expression, IMSIs matching it are allowed to use the network' />
      </params>
    </command>
    <command id='location updating reject cause &lt;2-111&gt;'>
      <params>
        <param name='location' doc='Set the reject cause of location updating reject' />
        <param name='updating' doc='Set the reject cause of location updating reject' />
        <param name='reject' doc='Set the reject cause of location updating reject' />
        <param name='cause' doc='Set the reject cause of location updating reject' />
        <param name='&lt;2-111&gt;' doc='Cause Value as Per GSM TS 04.08' />
      </params>
    </command>
    <command id='encryption a5 (0|1|2|3)'>
      <params>
        <param name='encryption' doc='Encryption options' />
        <param name='a5' doc='A5 encryption' />
        <param name='0' doc='A5/0: No encryption' />
        <param name='1' doc='A5/1: Encryption' />
        <param name='2' doc='A5/2: Export-grade Encryption' />
        <param name='3' doc='A5/3: &apos;New&apos; Secure Encryption' />
      </params>
    </command>
    <command id='rrlp mode (none|ms-based|ms-preferred|ass-preferred)'>
      <params>
        <param name='rrlp' doc='Radio Resource Location Protocol' />
        <param name='mode' doc='Set the Radio Resource Location Protocol Mode' />
        <param name='none' doc='Don&apos;t send RRLP request' />
        <param name='ms-based' doc='Request MS-based location' />
        <param name='ms-preferred' doc='Request any location, prefer MS-based' />
        <param name='ass-preferred' doc='Request any location, prefer MS-assisted' />
      </params>
    </command>
    <command id='mm info (0|1)'>
      <params>
        <param name='mm' doc='Mobility Management' />
        <param name='info' doc='Send MM INFO after LOC UPD ACCEPT' />
        <param name='0' doc='Disable' />
        <param name='1' doc='Enable' />
      </params>
    </command>
    <command id='subscriber-keep-in-ram (0|1)'>
      <params>
        <param name='subscriber-keep-in-ram' doc='Keep unused subscribers in RAM.' />
        <param name='0' doc='Delete unused subscribers' />
        <param name='1' doc='Keep unused subscribers' />
      </params>
    </command>
    <command id='timezone &lt;-19-19&gt; (0|15|30|45)'>
      <params>
        <param name='timezone' doc='Set the Timezone Offset of the network' />
        <param name='&lt;-19-19&gt;' doc='Timezone offset (hours)' />
        <param name='0' doc='Timezone offset (00 minutes)' />
        <param name='15' doc='Timezone offset (15 minutes)' />
        <param name='30' doc='Timezone offset (30 minutes)' />
        <param name='45' doc='Timezone offset (45 minutes)' />
      </params>
    </command>
    <command id='timezone &lt;-19-19&gt; (0|15|30|45) &lt;0-2&gt;'>
      <params>
        <param name='timezone' doc='Set the Timezone Offset of the network' />
        <param name='&lt;-19-19&gt;' doc='Timezone offset (hours)' />
        <param name='0' doc='Timezone offset (00 minutes)' />
        <param name='15' doc='Timezone offset (15 minutes)' />
        <param name='30' doc='Timezone offset (30 minutes)' />
        <param name='45' doc='Timezone offset (45 minutes)' />
        <param name='&lt;0-2&gt;' doc='DST offset (hours)' />
      </params>
    </command>
    <command id='no timezone'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='timezone' doc='Disable network timezone override, use system tz' />
      </params>
    </command>
    <command id='dyn_ts_allow_tch_f (0|1)'>
      <params>
        <param name='dyn_ts_allow_tch_f' doc='Allow or disallow allocating TCH/F on TCH_F_TCH_H_PDCH timeslots' />
        <param name='0' doc='Disallow TCH/F on TCH_F_TCH_H_PDCH (default)' />
        <param name='1' doc='Allow TCH/F on TCH_F_TCH_H_PDCH' />
      </params>
    </command>
    <command id='neci (0|1)'>
      <params>
        <param name='neci' doc='New Establish Cause Indication' />
        <param name='0' doc='Don&apos;t set the NECI bit' />
        <param name='1' doc='Set the NECI bit' />
      </params>
    </command>
    <command id='handover (0|1)'>
      <params>
        <param name='handover' doc='Handover Options' />
        <param name='0' doc='Don&apos;t perform in-call handover' />
        <param name='1' doc='Perform in-call handover' />
      </params>
    </command>
    <command id='handover window rxlev averaging &lt;1-10&gt;'>
      <params>
        <param name='handover' doc='Handover Options' />
        <param name='window' doc='Measurement Window' />
        <param name='rxlev' doc='Received Level Averaging' />
        <param name='averaging' doc='How many RxLev measurements are used for averaging' />
        <param name='&lt;1-10&gt;' doc='Amount to use for Averaging' />
      </params>
    </command>
    <command id='handover window rxqual averaging &lt;1-10&gt;'>
      <params>
        <param name='handover' doc='Handover Options' />
        <param name='window' doc='Measurement Window' />
        <param name='rxqual' doc='Received Quality Averaging' />
        <param name='averaging' doc='How many RxQual measurements are used for averaging' />
        <param name='&lt;1-10&gt;' doc='Amount to use for Averaging' />
      </params>
    </command>
    <command id='handover window rxlev neighbor averaging &lt;1-10&gt;'>
      <params>
        <param name='handover' doc='Handover Options' />
        <param name='window' doc='Measurement Window' />
        <param name='rxlev' doc='Received Level Averaging' />
        <param name='neighbor' doc='Neighbor' />
        <param name='averaging' doc='How many RxQual measurements are used for averaging' />
        <param name='&lt;1-10&gt;' doc='Amount to use for Averaging' />
      </params>
    </command>
    <command id='handover power budget interval &lt;1-99&gt;'>
      <params>
        <param name='handover' doc='Handover Options' />
        <param name='power' doc='Power Budget' />
        <param name='budget' doc='How often to check if we have a better cell (SACCH frames)' />
        <param name='interval' doc='Interval' />
        <param name='&lt;1-99&gt;' doc='Number' />
      </params>
    </command>
    <command id='handover power budget hysteresis &lt;0-999&gt;'>
      <params>
        <param name='handover' doc='Handover Options' />
        <param name='power' doc='Power Budget' />
        <param name='budget' doc='How many dB does a neighbor to be stronger to become a HO candidate' />
        <param name='hysteresis' doc='Hysteresis' />
        <param name='&lt;0-999&gt;' doc='Number' />
      </params>
    </command>
    <command id='handover maximum distance &lt;0-9999&gt;'>
      <params>
        <param name='handover' doc='Handover Options' />
        <param name='maximum' doc='How big is the maximum timing advance before HO is forced' />
        <param name='distance' doc='Distance' />
        <param name='&lt;0-9999&gt;' doc='Number' />
      </params>
    </command>
    <command id='timer t3101 (default|&lt;1-65535&gt;)'>
      <params>
        <param name='timer' doc='Configure GSM Timers' />
        <param name='t3101' doc='Set the timeout value for IMMEDIATE ASSIGNMENT (default: 10 seconds)' />
        <param name='default' doc='Set to default timer value (10 seconds)' />
        <param name='&lt;1-65535&gt;' doc='Timer Value in seconds' />
      </params>
    </command>
    <command id='timer t3103 (default|&lt;1-65535&gt;)'>
      <params>
        <param name='timer' doc='Configure GSM Timers' />
        <param name='t3103' doc='Set the timeout value for HANDOVER (default: 5 seconds)' />
        <param name='default' doc='Set to default timer value (5 seconds)' />
        <param name='&lt;1-65535&gt;' doc='Timer Value in seconds' />
      </params>
    </command>
    <command id='timer t3105 (default|&lt;1-65535&gt;)'>
      <params>
        <param name='timer' doc='Configure GSM Timers' />
        <param name='t3105' doc='Set the timer for repetition of PHYSICAL INFORMATION (default: 100 seconds)' />
        <param name='default' doc='Set to default timer value (100 seconds)' />
        <param name='&lt;1-65535&gt;' doc='Timer Value in seconds' />
      </params>
    </command>
    <command id='timer t3107 (default|&lt;1-65535&gt;)'>
      <params>
        <param name='timer' doc='Configure GSM Timers' />
        <param name='t3107' doc='Currently not used (default: 5 seconds)' />
        <param name='default' doc='Set to default timer value (5 seconds)' />
        <param name='&lt;1-65535&gt;' doc='Timer Value in seconds' />
      </params>
    </command>
    <command id='timer t3109 (default|&lt;1-65535&gt;)'>
      <params>
        <param name='timer' doc='Configure GSM Timers' />
        <param name='t3109' doc='Set the RSL SACCH deactivation timeout (default: 19 seconds)' />
        <param name='default' doc='Set to default timer value (19 seconds)' />
        <param name='&lt;1-65535&gt;' doc='Timer Value in seconds' />
      </params>
    </command>
    <command id='timer t3111 (default|&lt;1-65535&gt;)'>
      <params>
        <param name='timer' doc='Configure GSM Timers' />
        <param name='t3111' doc='Set the RSL timeout to wait before releasing the RF Channel (default: 2 seconds)' />
        <param name='default' doc='Set to default timer value (2 seconds)' />
        <param name='&lt;1-65535&gt;' doc='Timer Value in seconds' />
      </params>
    </command>
    <command id='timer t3113 (default|&lt;1-65535&gt;)'>
      <params>
        <param name='timer' doc='Configure GSM Timers' />
        <param name='t3113' doc='Set the time to try paging a subscriber (default: 60 seconds)' />
        <param name='default' doc='Set to default timer value (60 seconds)' />
        <param name='&lt;1-65535&gt;' doc='Timer Value in seconds' />
      </params>
    </command>
    <command id='timer t3115 (default|&lt;1-65535&gt;)'>
      <params>
        <param name='timer' doc='Configure GSM Timers' />
        <param name='t3115' doc='Currently not used (default: 10 seconds)' />
        <param name='default' doc='Set to default timer value (10 seconds)' />
        <param name='&lt;1-65535&gt;' doc='Timer Value in seconds' />
      </params>
    </command>
    <command id='timer t3117 (default|&lt;1-65535&gt;)'>
      <params>
        <param name='timer' doc='Configure GSM Timers' />
        <param name='t3117' doc='Currently not used (default: 10 seconds)' />
        <param name='default' doc='Set to default timer value (10 seconds)' />
        <param name='&lt;1-65535&gt;' doc='Timer Value in seconds' />
      </params>
    </command>
    <command id='timer t3119 (default|&lt;1-65535&gt;)'>
      <params>
        <param name='timer' doc='Configure GSM Timers' />
        <param name='t3119' doc='Currently not used (default: 10 seconds)' />
        <param name='default' doc='Set to default timer value (10 seconds)' />
        <param name='&lt;1-65535&gt;' doc='Timer Value in seconds' />
      </params>
    </command>
    <command id='timer t3122 (default|&lt;1-65535&gt;)'>
      <params>
        <param name='timer' doc='Configure GSM Timers' />
        <param name='t3122' doc='Default waiting time (seconds) after IMM ASS REJECT (default: 10 seconds)' />
        <param name='default' doc='Set to default timer value (10 seconds)' />
        <param name='&lt;1-65535&gt;' doc='Timer Value in seconds' />
      </params>
    </command>
    <command id='timer t3141 (default|&lt;1-65535&gt;)'>
      <params>
        <param name='timer' doc='Configure GSM Timers' />
        <param name='t3141' doc='Currently not used (default: 10 seconds)' />
        <param name='default' doc='Set to default timer value (10 seconds)' />
        <param name='&lt;1-65535&gt;' doc='Timer Value in seconds' />
      </params>
    </command>
    <command id='paging any use tch (0|1)'>
      <params>
        <param name='paging' doc='Assign a TCH when receiving a Paging Any request' />
        <param name='any' doc='Any Channel' />
        <param name='use' doc='Use' />
        <param name='tch' doc='TCH' />
        <param name='0' doc='Do not use TCH for Paging Request Any' />
        <param name='1' doc='Do use TCH for Paging Request Any' />
      </params>
    </command>
    <command id='bts &lt;0-255&gt;'>
      <params>
        <param name='bts' doc='Select a BTS to configure' />
        <param name='&lt;0-255&gt;' doc='BTS Number' />
      </params>
    </command>
  </node>
  <node id='config-net-bts'>
    <name>config-net-bts</name>
    <command id='type (unknown|bs11|nanobts|rbs2000|nokia_site|sysmobts)'>
      <params>
        <param name='type' doc='BTS Vendor/Type' />
        <param name='unknown' doc='Unknown BTS Type' />
        <param name='bs11' doc='Siemens BTS (BS-11 or compatible)' />
        <param name='nanobts' doc='ip.access nanoBTS or compatible' />
        <param name='rbs2000' doc='Ericsson RBS2000 Series' />
        <param name='nokia_site' doc='Nokia {Metro,Ultra,In}Site' />
        <param name='sysmobts' doc='sysmocom sysmoBTS' />
      </params>
    </command>
    <command id='description .TEXT'>
      <params>
        <param name='description' doc='Save human-readable description of the object' />
        <param name='.TEXT' doc='Text until the end of the line' />
      </params>
    </command>
    <command id='no description'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='description' doc='Remove description of the object' />
      </params>
    </command>
    <command id='band BAND'>
      <params>
        <param name='band' doc='Set the frequency band of this BTS' />
        <param name='BAND' doc='Frequency band' />
      </params>
    </command>
    <command id='cell_identity &lt;0-65535&gt;'>
      <params>
        <param name='cell_identity' doc='Set the Cell identity of this BTS' />
        <param name='&lt;0-65535&gt;' doc='Cell Identity' />
      </params>
    </command>
    <command id='dtx uplink [force]'>
      <params>
        <param name='dtx' doc='Configure discontinuous transmission' />
        <param name='uplink' doc='Enable Uplink DTX for this BTS' />
        <param name='[force]' doc='MS &apos;shall&apos; use DTXu instead of &apos;may&apos; use (might not be supported by older phones).' />
      </params>
    </command>
    <command id='dtx downlink'>
      <params>
        <param name='dtx' doc='Configure discontinuous transmission' />
        <param name='downlink' doc='Enable Downlink DTX for this BTS' />
      </params>
    </command>
    <command id='no dtx uplink'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='dtx' doc='Configure discontinuous transmission' />
        <param name='uplink' doc='Disable Uplink DTX for this BTS' />
      </params>
    </command>
    <command id='no dtx downlink'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='dtx' doc='Configure discontinuous transmission' />
        <param name='downlink' doc='Disable Downlink DTX for this BTS' />
      </params>
    </command>
    <command id='location_area_code &lt;0-65535&gt;'>
      <params>
        <param name='location_area_code' doc='Set the Location Area Code (LAC) of this BTS' />
        <param name='&lt;0-65535&gt;' doc='LAC' />
      </params>
    </command>
    <command id='base_station_id_code &lt;0-63&gt;'>
      <params>
        <param name='base_station_id_code' doc='Set the Base Station Identity Code (BSIC) of this BTS' />
        <param name='&lt;0-63&gt;' doc='BSIC of this BTS' />
      </params>
    </command>
    <command id='ip.access unit_id &lt;0-65534&gt; &lt;0-255&gt;'>
      <params>
        <param name='ip.access' doc='Abis/IP specific options' />
        <param name='unit_id' doc='Set the IPA BTS Unit ID' />
        <param name='&lt;0-65534&gt;' doc='Unit ID (Site)' />
        <param name='&lt;0-255&gt;' doc='Unit ID (BTS)' />
      </params>
    </command>
    <command id='ip.access rsl-ip A.B.C.D'>
      <params>
        <param name='ip.access' doc='Abis/IP specific options' />
        <param name='rsl-ip' doc='Set the IPA RSL IP Address of the BSC' />
        <param name='A.B.C.D' doc='Destination IP address for RSL connection' />
      </params>
    </command>
    <command id='nokia_site skip-reset (0|1)'>
      <params>
        <param name='nokia_site' doc='Nokia *Site related commands' />
        <param name='skip-reset' doc='Skip the reset step during bootstrap process of this BTS' />
        <param name='0' doc='Do NOT skip the reset' />
        <param name='1' doc='Skip the reset' />
      </params>
    </command>
    <command id='nokia_site no-local-rel-conf (0|1)'>
      <params>
        <param name='nokia_site' doc='Nokia *Site related commands' />
        <param name='no-local-rel-conf' doc='Do not wait for RELease CONFirm message when releasing channel locally' />
        <param name='0' doc='Wait for RELease CONFirm' />
        <param name='1' doc='Do not wait for RELease CONFirm' />
      </params>
    </command>
    <command id='nokia_site bts-reset-timer  &lt;15-100&gt;'>
      <params>
        <param name='nokia_site' doc='Nokia *Site related commands' />
        <param name='bts-reset-timer' doc='The amount of time (in sec.) between BTS_RESET is sent,' />
        <param name='&lt;15-100&gt;' doc='and the BTS is being bootstrapped.' />
      </params>
    </command>
    <command id='oml ip.access stream_id &lt;0-255&gt; line E1_LINE'>
      <params>
        <param name='oml' doc='Organization &amp; Maintenance Link' />
        <param name='ip.access' doc='A-bis/IP Specific Options' />
        <param name='stream_id' doc='Set the ip.access Stream ID of the OML link of this BTS' />
        <param name='&lt;0-255&gt;' doc='Stream Identifier' />
        <param name='line' doc='Virtual E1 Line Number' />
        <param name='E1_LINE' doc='Virtual E1 Line Number' />
      </params>
    </command>
    <command id='oml e1 line E1_LINE timeslot &lt;1-31&gt; sub-slot (0|1|2|3|full)'>
      <params>
        <param name='oml' doc='Organization &amp; Maintenance Link' />
        <param name='e1' doc='OML E1/T1 Configuration' />
        <param name='line' doc='E1/T1 line number to be used for OML' />
        <param name='E1_LINE' doc='E1/T1 line number to be used for OML' />
        <param name='timeslot' doc='E1/T1 timeslot to be used for OML' />
        <param name='&lt;1-31&gt;' doc='E1/T1 timeslot to be used for OML' />
        <param name='sub-slot' doc='E1/T1 sub-slot to be used for OML' />
        <param name='0' doc='Use E1/T1 sub-slot 0' />
        <param name='1' doc='Use E1/T1 sub-slot 1' />
        <param name='2' doc='Use E1/T1 sub-slot 2' />
        <param name='3' doc='Use E1/T1 sub-slot 3' />
        <param name='full' doc='Use full E1 slot 3' />
      </params>
    </command>
    <command id='oml e1 tei &lt;0-63&gt;'>
      <params>
        <param name='oml' doc='Organization &amp; Maintenance Link' />
        <param name='e1' doc='OML E1/T1 Configuration' />
        <param name='tei' doc='Set the TEI to be used for OML' />
        <param name='&lt;0-63&gt;' doc='TEI Number' />
      </params>
    </command>
    <command id='channel allocator (ascending|descending)'>
      <params>
        <param name='channel' doc='Channnel Allocator' />
        <param name='allocator' doc='Channel Allocator' />
        <param name='ascending' doc='Allocate Timeslots and Transceivers in ascending order' />
        <param name='descending' doc='Allocate Timeslots and Transceivers in descending order' />
      </params>
    </command>
    <command id='rach tx integer &lt;0-15&gt;'>
      <params>
        <param name='rach' doc='Random Access Control Channel' />
        <param name='tx' doc='Set the raw tx integer value in RACH Control parameters IE' />
        <param name='integer' doc='Set the raw tx integer value in RACH Control parameters IE' />
        <param name='&lt;0-15&gt;' doc='Raw tx integer value in RACH Control parameters IE' />
      </params>
    </command>
    <command id='rach max transmission (1|2|4|7)'>
      <params>
        <param name='rach' doc='Random Access Control Channel' />
        <param name='max' doc='Set the maximum number of RACH burst transmissions' />
        <param name='transmission' doc='Set the maximum number of RACH burst transmissions' />
        <param name='1' doc='Maximum number of 1 RACH burst transmissions' />
        <param name='2' doc='Maximum number of 2 RACH burst transmissions' />
        <param name='4' doc='Maximum number of 4 RACH burst transmissions' />
        <param name='7' doc='Maximum number of 7 RACH burst transmissions' />
      </params>
    </command>
    <command id='channel-descrption attach (0|1)'>
      <params>
        <param name='channel-descrption' doc='Channel Description' />
        <param name='attach' doc='Set if attachment is required' />
        <param name='0' doc='Attachment is NOT required' />
        <param name='1' doc='Attachment is required (standard)' />
      </params>
    </command>
    <command id='channel-descrption bs-pa-mfrms &lt;2-9&gt;'>
      <params>
        <param name='channel-descrption' doc='Channel Description' />
        <param name='bs-pa-mfrms' doc='Set number of multiframe periods for paging groups' />
        <param name='&lt;2-9&gt;' doc='Number of multiframe periods for paging groups' />
      </params>
    </command>
    <command id='channel-descrption bs-ag-blks-res &lt;0-7&gt;'>
      <params>
        <param name='channel-descrption' doc='Channel Description' />
        <param name='bs-ag-blks-res' doc='Set number of blocks reserved for access grant' />
        <param name='&lt;0-7&gt;' doc='Number of blocks reserved for access grant' />
      </params>
    </command>
    <command id='rach nm busy threshold &lt;0-255&gt;'>
      <params>
        <param name='rach' doc='Random Access Control Channel' />
        <param name='nm' doc='Network Management' />
        <param name='busy' doc='Set the NM Busy Threshold' />
        <param name='threshold' doc='Set the NM Busy Threshold' />
        <param name='&lt;0-255&gt;' doc='NM Busy Threshold in dB' />
      </params>
    </command>
    <command id='rach nm load average &lt;0-65535&gt;'>
      <params>
        <param name='rach' doc='Random Access Control Channel' />
        <param name='nm' doc='Network Management' />
        <param name='load' doc='Set the NM Loadaverage Slots value' />
        <param name='average' doc='Set the NM Loadaverage Slots value' />
        <param name='&lt;0-65535&gt;' doc='NM Loadaverage Slots value' />
      </params>
    </command>
    <command id='cell barred (0|1)'>
      <params>
        <param name='cell' doc='Should this cell be barred from access?' />
        <param name='barred' doc='Should this cell be barred from access?' />
        <param name='0' doc='Cell should NOT be barred' />
        <param name='1' doc='Cell should be barred' />
      </params>
    </command>
    <command id='rach emergency call allowed (0|1)'>
      <params>
        <param name='rach' doc='Random Access Control Channel' />
        <param name='emergency' doc='Should this cell allow emergency calls?' />
        <param name='call' doc='Should this cell allow emergency calls?' />
        <param name='allowed' doc='Should this cell allow emergency calls?' />
        <param name='0' doc='Do NOT allow emergency calls' />
        <param name='1' doc='Allow emergency calls' />
      </params>
    </command>
    <command id='rach access-control-class (0|1|2|3|4|5|6|7|8|9|11|12|13|14|15) (barred|allowed)'>
      <params>
        <param name='rach' doc='Random Access Control Channel' />
        <param name='access-control-class' doc='Set access control class' />
        <param name='0' doc='Access control class 0' />
        <param name='1' doc='Access control class 1' />
        <param name='2' doc='Access control class 2' />
        <param name='3' doc='Access control class 3' />
        <param name='4' doc='Access control class 4' />
        <param name='5' doc='Access control class 5' />
        <param name='6' doc='Access control class 6' />
        <param name='7' doc='Access control class 7' />
        <param name='8' doc='Access control class 8' />
        <param name='9' doc='Access control class 9' />
        <param name='11' doc='Access control class 11 for PLMN use' />
        <param name='12' doc='Access control class 12 for security services' />
        <param name='13' doc='Access control class 13 for public utilities (e.g. water/gas suppliers)' />
        <param name='14' doc='Access control class 14 for emergency services' />
        <param name='15' doc='Access control class 15 for PLMN staff' />
        <param name='barred' doc='barred to use access control class' />
        <param name='allowed' doc='allowed to use access control class' />
      </params>
    </command>
    <command id='ms max power &lt;0-40&gt;'>
      <params>
        <param name='ms' doc='MS Options' />
        <param name='max' doc='Maximum transmit power of the MS' />
        <param name='power' doc='Maximum transmit power of the MS' />
        <param name='&lt;0-40&gt;' doc='Maximum transmit power of the MS in dBm' />
      </params>
    </command>
    <command id='periodic location update &lt;6-1530&gt;'>
      <params>
        <param name='periodic' doc='Periodic Location Updating Interval' />
        <param name='location' doc='Periodic Location Updating Interval' />
        <param name='update' doc='Periodic Location Updating Interval' />
        <param name='&lt;6-1530&gt;' doc='Periodic Location Updating Interval in Minutes' />
      </params>
    </command>
    <command id='no periodic location update'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='periodic' doc='Periodic Location Updating Interval' />
        <param name='location' doc='Periodic Location Updating Interval' />
        <param name='update' doc='Periodic Location Updating Interval' />
      </params>
    </command>
    <command id='cell reselection hysteresis &lt;0-14&gt;'>
      <params>
        <param name='cell' doc='Cell Parameters' />
        <param name='reselection' doc='Cell re-selection parameters' />
        <param name='hysteresis' doc='Cell Re-Selection Hysteresis in dB' />
        <param name='&lt;0-14&gt;' doc='Cell Re-Selection Hysteresis in dB' />
      </params>
    </command>
    <command id='rxlev access min &lt;0-63&gt;'>
      <params>
        <param name='rxlev' doc='Minimum RxLev needed for cell access' />
        <param name='access' doc='Minimum RxLev needed for cell access' />
        <param name='min' doc='Minimum RxLev needed for cell access' />
        <param name='&lt;0-63&gt;' doc='Minimum RxLev needed for cell access (better than -110dBm)' />
      </params>
    </command>
    <command id='cell bar qualify (0|1)'>
      <params>
        <param name='cell' doc='Cell Parameters' />
        <param name='bar' doc='Cell Bar Qualify' />
        <param name='qualify' doc='Cell Bar Qualify' />
        <param name='0' doc='Set CBQ to 0' />
        <param name='1' doc='Set CBQ to 1' />
      </params>
    </command>
    <command id='cell reselection offset &lt;0-126&gt;'>
      <params>
        <param name='cell' doc='Cell Parameters' />
        <param name='reselection' doc='Cell Re-Selection Parameters' />
        <param name='offset' doc='Cell Re-Selection Offset (CRO) in dB' />
        <param name='&lt;0-126&gt;' doc='Cell Re-Selection Offset (CRO) in dB' />
      </params>
    </command>
    <command id='temporary offset &lt;0-60&gt;'>
      <params>
        <param name='temporary' doc='Cell selection temporary negative offset' />
        <param name='offset' doc='Cell selection temporary negative offset' />
        <param name='&lt;0-60&gt;' doc='Cell selection temporary negative offset in dB' />
      </params>
    </command>
    <command id='temporary offset infinite'>
      <params>
        <param name='temporary' doc='Cell selection temporary negative offset' />
        <param name='offset' doc='Cell selection temporary negative offset' />
        <param name='infinite' doc='Sets cell selection temporary negative offset to infinity' />
      </params>
    </command>
    <command id='penalty time &lt;20-620&gt;'>
      <params>
        <param name='penalty' doc='Cell selection penalty time' />
        <param name='time' doc='Cell selection penalty time' />
        <param name='&lt;20-620&gt;' doc='Cell selection penalty time in seconds (by 20s increments)' />
      </params>
    </command>
    <command id='penalty time reserved'>
      <params>
        <param name='penalty' doc='Cell selection penalty time' />
        <param name='time' doc='Cell selection penalty time' />
        <param name='reserved' doc='Set cell selection penalty time to reserved value 31, (indicate that CELL_RESELECT_OFFSET is subtracted from C2 and TEMPORARY_OFFSET is ignored)' />
      </params>
    </command>
    <command id='radio-link-timeout &lt;4-64&gt;'>
      <params>
        <param name='radio-link-timeout' doc='Radio link timeout criterion (BTS side)' />
        <param name='&lt;4-64&gt;' doc='Radio link timeout value (lost SACCH block)' />
      </params>
    </command>
    <command id='radio-link-timeout infinite'>
      <params>
        <param name='radio-link-timeout' doc='Radio link timeout criterion (BTS side)' />
        <param name='infinite' doc='Infinite Radio link timeout value (use only for BTS RF testing)' />
      </params>
    </command>
    <command id='gprs mode (none|gprs|egprs)'>
      <params>
        <param name='gprs' doc='GPRS Packet Network' />
        <param name='mode' doc='GPRS Mode for this BTS' />
        <param name='none' doc='GPRS Disabled on this BTS' />
        <param name='gprs' doc='GPRS Enabled on this BTS' />
        <param name='egprs' doc='EGPRS (EDGE) Enabled on this BTS' />
      </params>
    </command>
    <command id='gprs 11bit_rach_support_for_egprs (0|1)'>
      <params>
        <param name='gprs' doc='GPRS Packet Network' />
        <param name='11bit_rach_support_for_egprs' doc='11 bit RACH options' />
        <param name='0' doc='Disable 11 bit RACH for EGPRS' />
        <param name='1' doc='Enable 11 bit RACH for EGPRS' />
      </params>
    </command>
    <command id='gprs ns timer (tns-block|tns-block-retries|tns-reset|tns-reset-retries|tns-test|tns-alive|tns-alive-retries|tsns-prov) &lt;0-255&gt;'>
      <params>
        <param name='gprs' doc='GPRS Packet Network' />
        <param name='ns' doc='Network Service' />
        <param name='timer' doc='Network Service Timer' />
        <param name='tns-block' doc='(un)blocking Timer (Tns-block) timeout' />
        <param name='tns-block-retries' doc='(un)blocking Timer (Tns-block) number of retries' />
        <param name='tns-reset' doc='Reset Timer (Tns-reset) timeout' />
        <param name='tns-reset-retries' doc='Reset Timer (Tns-reset) number of retries' />
        <param name='tns-test' doc='Test Timer (Tns-test) timeout' />
        <param name='tns-alive' doc='Alive Timer (Tns-alive) timeout' />
        <param name='tns-alive-retries' doc='Alive Timer (Tns-alive) number of retries' />
        <param name='tsns-prov' doc='SNS Provision Timer (Tsns-prov) timeout' />
        <param name='&lt;0-255&gt;' doc='Timer Value' />
      </params>
    </command>
    <command id='gprs routing area &lt;0-255&gt;'>
      <params>
        <param name='gprs' doc='GPRS Packet Network' />
        <param name='routing' doc='GPRS Routing Area Code' />
        <param name='area' doc='GPRS Routing Area Code' />
        <param name='&lt;0-255&gt;' doc='GPRS Routing Area Code' />
      </params>
    </command>
    <command id='gprs network-control-order (nc0|nc1|nc2)'>
      <params>
        <param name='gprs' doc='GPRS Packet Network' />
        <param name='network-control-order' doc='GPRS Network Control Order' />
        <param name='nc0' doc='MS controlled cell re-selection, no measurement reporting' />
        <param name='nc1' doc='MS controlled cell re-selection, MS sends measurement reports' />
        <param name='nc2' doc='Network controlled cell re-selection, MS sends measurement reports' />
      </params>
    </command>
    <command id='gprs control-ack-type-rach'>
      <params>
        <param name='gprs' doc='GPRS Packet Network' />
        <param name='control-ack-type-rach' doc='Set GPRS Control Ack Type for PACKET CONTROL ACKNOWLEDGMENT message to four access bursts format instead of default RLC/MAC control block' />
      </params>
    </command>
    <command id='no gprs control-ack-type-rach'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='gprs' doc='GPRS Packet Network' />
        <param name='control-ack-type-rach' doc='Set GPRS Control Ack Type for PACKET CONTROL ACKNOWLEDGMENT message to four access bursts format instead of default RLC/MAC control block' />
      </params>
    </command>
    <command id='gprs cell bvci &lt;2-65535&gt;'>
      <params>
        <param name='gprs' doc='GPRS Packet Network' />
        <param name='cell' doc='GPRS Cell Settings' />
        <param name='bvci' doc='GPRS BSSGP VC Identifier' />
        <param name='&lt;2-65535&gt;' doc='GPRS BSSGP VC Identifier' />
      </params>
    </command>
    <command id='gprs cell timer (blocking-timer|blocking-retries|unblocking-retries|reset-timer|reset-retries|suspend-timer|suspend-retries|resume-timer|resume-retries|capability-update-timer|capability-update-retries) &lt;0-255&gt;'>
      <params>
        <param name='gprs' doc='GPRS Packet Network' />
        <param name='cell' doc='Cell / BSSGP' />
        <param name='timer' doc='Cell/BSSGP Timer' />
        <param name='blocking-timer' doc='Tbvc-block timeout' />
        <param name='blocking-retries' doc='Tbvc-block retries' />
        <param name='unblocking-retries' doc='Tbvc-unblock retries' />
        <param name='reset-timer' doc='Tbvcc-reset timeout' />
        <param name='reset-retries' doc='Tbvc-reset retries' />
        <param name='suspend-timer' doc='Tbvc-suspend timeout' />
        <param name='suspend-retries' doc='Tbvc-suspend retries' />
        <param name='resume-timer' doc='Tbvc-resume timeout' />
        <param name='resume-retries' doc='Tbvc-resume retries' />
        <param name='capability-update-timer' doc='Tbvc-capa-update timeout' />
        <param name='capability-update-retries' doc='Tbvc-capa-update retries' />
        <param name='&lt;0-255&gt;' doc='Timer Value' />
      </params>
    </command>
    <command id='gprs nsei &lt;0-65535&gt;'>
      <params>
        <param name='gprs' doc='GPRS Packet Network' />
        <param name='nsei' doc='GPRS NS Entity Identifier' />
        <param name='&lt;0-65535&gt;' doc='GPRS NS Entity Identifier' />
      </params>
    </command>
    <command id='gprs nsvc &lt;0-1&gt; nsvci &lt;0-65535&gt;'>
      <params>
        <param name='gprs' doc='GPRS Packet Network' />
        <param name='nsvc' doc='Network Service Virtual Connection (NS-VC)' />
        <param name='&lt;0-1&gt;' doc='NSVC Logical Number' />
        <param name='nsvci' doc='NS Virtual Connection Identifier' />
        <param name='&lt;0-65535&gt;' doc='GPRS NS VC Identifier' />
      </params>
    </command>
    <command id='gprs nsvc &lt;0-1&gt; local udp port &lt;0-65535&gt;'>
      <params>
        <param name='gprs' doc='GPRS Packet Network' />
        <param name='nsvc' doc='Network Service Virtual Connection (NS-VC)' />
        <param name='&lt;0-1&gt;' doc='NSVC Logical Number' />
        <param name='local' doc='GPRS NS Local UDP Port' />
        <param name='udp' doc='GPRS NS Local UDP Port' />
        <param name='port' doc='GPRS NS Local UDP Port' />
        <param name='&lt;0-65535&gt;' doc='GPRS NS Local UDP Port Number' />
      </params>
    </command>
    <command id='gprs nsvc &lt;0-1&gt; remote udp port &lt;0-65535&gt;'>
      <params>
        <param name='gprs' doc='GPRS Packet Network' />
        <param name='nsvc' doc='Network Service Virtual Connection (NS-VC)' />
        <param name='&lt;0-1&gt;' doc='NSVC Logical Number' />
        <param name='remote' doc='GPRS NS Remote UDP Port' />
        <param name='udp' doc='GPRS NS Remote UDP Port' />
        <param name='port' doc='GPRS NS Remote UDP Port' />
        <param name='&lt;0-65535&gt;' doc='GPRS NS Remote UDP Port Number' />
      </params>
    </command>
    <command id='gprs nsvc &lt;0-1&gt; remote ip A.B.C.D'>
      <params>
        <param name='gprs' doc='GPRS Packet Network' />
        <param name='nsvc' doc='Network Service Virtual Connection (NS-VC)' />
        <param name='&lt;0-1&gt;' doc='NSVC Logical Number' />
        <param name='remote' doc='GPRS NS Remote IP Address' />
        <param name='ip' doc='GPRS NS Remote IP Address' />
        <param name='A.B.C.D' doc='GPRS NS Remote IP Address' />
      </params>
    </command>
    <command id='paging free &lt;-1-1024&gt;'>
      <params>
        <param name='paging' doc='Paging options' />
        <param name='free' doc='Only page when having a certain amount of free slots' />
        <param name='&lt;-1-1024&gt;' doc='amount of required free paging slots. -1 to disable' />
      </params>
    </command>
    <command id='system-information (1|2|3|4|5|6|7|8|9|10|13|16|17|18|19|20|2bis|2ter|2quater|5bis|5ter) mode (static|computed)'>
      <params>
        <param name='system-information' doc='System Information Messages' />
        <param name='1' doc='System Information Type 1' />
        <param name='2' doc='System Information Type 2' />
        <param name='3' doc='System Information Type 3' />
        <param name='4' doc='System Information Type 4' />
        <param name='5' doc='System Information Type 5' />
        <param name='6' doc='System Information Type 6' />
        <param name='7' doc='System Information Type 7' />
        <param name='8' doc='System Information Type 8' />
        <param name='9' doc='System Information Type 9' />
        <param name='10' doc='System Information Type 10' />
        <param name='13' doc='System Information Type 13' />
        <param name='16' doc='System Information Type 16' />
        <param name='17' doc='System Information Type 17' />
        <param name='18' doc='System Information Type 18' />
        <param name='19' doc='System Information Type 19' />
        <param name='20' doc='System Information Type 20' />
        <param name='2bis' doc='System Information Type 2bis' />
        <param name='2ter' doc='System Information Type 2ter' />
        <param name='2quater' doc='System Information Type 2quater' />
        <param name='5bis' doc='System Information Type 5bis' />
        <param name='5ter' doc='System Information Type 5ter' />
        <param name='mode' doc='System Information Mode' />
        <param name='static' doc='Static user-specified' />
        <param name='computed' doc='Dynamic, BSC-computed' />
      </params>
    </command>
    <command id='system-information (1|2|3|4|5|6|7|8|9|10|13|16|17|18|19|20|2bis|2ter|2quater|5bis|5ter) static HEXSTRING'>
      <params>
        <param name='system-information' doc='System Information Messages' />
        <param name='1' doc='System Information Type 1' />
        <param name='2' doc='System Information Type 2' />
        <param name='3' doc='System Information Type 3' />
        <param name='4' doc='System Information Type 4' />
        <param name='5' doc='System Information Type 5' />
        <param name='6' doc='System Information Type 6' />
        <param name='7' doc='System Information Type 7' />
        <param name='8' doc='System Information Type 8' />
        <param name='9' doc='System Information Type 9' />
        <param name='10' doc='System Information Type 10' />
        <param name='13' doc='System Information Type 13' />
        <param name='16' doc='System Information Type 16' />
        <param name='17' doc='System Information Type 17' />
        <param name='18' doc='System Information Type 18' />
        <param name='19' doc='System Information Type 19' />
        <param name='20' doc='System Information Type 20' />
        <param name='2bis' doc='System Information Type 2bis' />
        <param name='2ter' doc='System Information Type 2ter' />
        <param name='2quater' doc='System Information Type 2quater' />
        <param name='5bis' doc='System Information Type 5bis' />
        <param name='5ter' doc='System Information Type 5ter' />
        <param name='static' doc='Static System Information filling' />
        <param name='HEXSTRING' doc='Static user-specified SI content in HEX notation' />
      </params>
    </command>
    <command id='early-classmark-sending (allowed|forbidden)'>
      <params>
        <param name='early-classmark-sending' doc='Early Classmark Sending' />
        <param name='allowed' doc='Early Classmark Sending is allowed' />
        <param name='forbidden' doc='Early Classmark Sending is forbidden' />
      </params>
    </command>
    <command id='early-classmark-sending-3g (allowed|forbidden)'>
      <params>
        <param name='early-classmark-sending-3g' doc='3G Early Classmark Sending' />
        <param name='allowed' doc='3G Early Classmark Sending is allowed' />
        <param name='forbidden' doc='3G Early Classmark Sending is forbidden' />
      </params>
    </command>
    <command id='neighbor-list mode (automatic|manual|manual-si5)'>
      <params>
        <param name='neighbor-list' doc='Neighbor List' />
        <param name='mode' doc='Mode of Neighbor List generation' />
        <param name='automatic' doc='Automatically from all BTS in this OpenBSC' />
        <param name='manual' doc='Manual' />
        <param name='manual-si5' doc='Manual with different lists for SI2 and SI5' />
      </params>
    </command>
    <command id='neighbor-list (add|del) arfcn &lt;0-1023&gt;'>
      <params>
        <param name='neighbor-list' doc='Neighbor List' />
        <param name='add' doc='Add to manual neighbor list' />
        <param name='del' doc='Delete from manual neighbor list' />
        <param name='arfcn' doc='ARFCN of neighbor' />
        <param name='&lt;0-1023&gt;' doc='ARFCN of neighbor' />
      </params>
    </command>
    <command id='si5 neighbor-list (add|del) arfcn &lt;0-1023&gt;'>
      <params>
        <param name='si5' doc='SI5 Neighbor List' />
        <param name='neighbor-list' doc='SI5 Neighbor List' />
        <param name='add' doc='Add to manual SI5 neighbor list' />
        <param name='del' doc='Delete from SI5 manual neighbor list' />
        <param name='arfcn' doc='ARFCN of neighbor' />
        <param name='&lt;0-1023&gt;' doc='ARFCN of neighbor' />
      </params>
    </command>
    <command id='si2quater neighbor-list add earfcn &lt;0-65535&gt; thresh-hi &lt;0-31&gt; thresh-lo &lt;0-32&gt; prio &lt;0-8&gt; qrxlv &lt;0-32&gt; meas &lt;0-8&gt;'>
      <params>
        <param name='si2quater' doc='SI2quater Neighbor List' />
        <param name='neighbor-list' doc='SI2quater Neighbor List' />
        <param name='add' doc='Add to manual SI2quater neighbor list' />
        <param name='earfcn' doc='EARFCN of neighbor' />
        <param name='&lt;0-65535&gt;' doc='EARFCN of neighbor' />
        <param name='thresh-hi' doc='threshold high bits' />
        <param name='&lt;0-31&gt;' doc='threshold high bits' />
        <param name='thresh-lo' doc='threshold low bits' />
        <param name='&lt;0-32&gt;' doc='threshold low bits (32 means NA)' />
        <param name='prio' doc='priority' />
        <param name='&lt;0-8&gt;' doc='priority (8 means NA)' />
        <param name='qrxlv' doc='QRXLEVMIN' />
        <param name='&lt;0-32&gt;' doc='QRXLEVMIN (32 means NA)' />
        <param name='meas' doc='measurement bandwidth' />
        <param name='&lt;0-8&gt;' doc='measurement bandwidth (8 means NA)' />
      </params>
    </command>
    <command id='si2quater neighbor-list del earfcn &lt;0-65535&gt;'>
      <params>
        <param name='si2quater' doc='SI2quater Neighbor List' />
        <param name='neighbor-list' doc='SI2quater Neighbor List' />
        <param name='del' doc='Delete from SI2quater manual neighbor list' />
        <param name='earfcn' doc='EARFCN of neighbor' />
        <param name='&lt;0-65535&gt;' doc='EARFCN' />
      </params>
    </command>
    <command id='si2quater neighbor-list add uarfcn &lt;0-16383&gt; &lt;0-511&gt; &lt;0-1&gt;'>
      <params>
        <param name='si2quater' doc='SI2quater Neighbor List' />
        <param name='neighbor-list' doc='SI2quater Neighbor List' />
        <param name='add' doc='Add to manual SI2quater neighbor list' />
        <param name='uarfcn' doc='UARFCN of neighbor' />
        <param name='&lt;0-16383&gt;' doc='UARFCN of neighbor' />
        <param name='&lt;0-511&gt;' doc='scrambling code' />
        <param name='&lt;0-1&gt;' doc='diversity bit' />
      </params>
    </command>
    <command id='si2quater neighbor-list del uarfcn &lt;0-16383&gt; &lt;0-511&gt;'>
      <params>
        <param name='si2quater' doc='SI2quater Neighbor List' />
        <param name='neighbor-list' doc='SI2quater Neighbor List' />
        <param name='del' doc='Delete from SI2quater manual neighbor list' />
        <param name='uarfcn' doc='UARFCN of neighbor' />
        <param name='&lt;0-16383&gt;' doc='UARFCN' />
        <param name='&lt;0-511&gt;' doc='scrambling code' />
      </params>
    </command>
    <command id='rf-lock-exclude'>
      <params>
        <param name='rf-lock-exclude' doc='Exclude this BTS from the global RF Lock' />
      </params>
    </command>
    <command id='no rf-lock-exclude'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='rf-lock-exclude' doc='Exclude this BTS from the global RF Lock' />
      </params>
    </command>
    <command id='force-combined-si'>
      <params>
        <param name='force-combined-si' doc='Force the generation of a single SI (no ter/bis)' />
      </params>
    </command>
    <command id='no force-combined-si'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='force-combined-si' doc='Force the generation of a single SI (no ter/bis)' />
      </params>
    </command>
    <command id='codec-support fr'>
      <params>
        <param name='codec-support' doc='Codec Support settings' />
        <param name='fr' doc='Fullrate' />
      </params>
    </command>
    <command id='codec-support fr (hr|efr|amr)'>
      <params>
        <param name='codec-support' doc='Codec Support settings' />
        <param name='fr' doc='Fullrate' />
        <param name='hr' doc='Half Rate' />
        <param name='efr' doc='Enhanced Full Rate' />
        <param name='amr' doc='Adaptive Multirate' />
      </params>
    </command>
    <command id='codec-support fr (hr|efr|amr) (hr|efr|amr)'>
      <params>
        <param name='codec-support' doc='Codec Support settings' />
        <param name='fr' doc='Fullrate' />
        <param name='hr' doc='Half Rate' />
        <param name='efr' doc='Enhanced Full Rate' />
        <param name='amr' doc='Adaptive Multirate' />
        <param name='hr' doc='Half Rate' />
        <param name='efr' doc='Enhanced Full Rate' />
        <param name='amr' doc='Adaptive Multirate' />
      </params>
    </command>
    <command id='codec-support fr (hr|efr|amr) (hr|efr|amr) (hr|efr|amr)'>
      <params>
        <param name='codec-support' doc='Codec Support settings' />
        <param name='fr' doc='Fullrate' />
        <param name='hr' doc='Half Rate' />
        <param name='efr' doc='Enhanced Full Rate' />
        <param name='amr' doc='Adaptive Multirate' />
        <param name='hr' doc='Half Rate' />
        <param name='efr' doc='Enhanced Full Rate' />
        <param name='amr' doc='Adaptive Multirate' />
        <param name='hr' doc='Half Rate' />
        <param name='efr' doc='Enhanced Full Rate' />
        <param name='amr' doc='Adaptive Multirate' />
      </params>
    </command>
    <command id='codec-support fr (hr|efr|amr) (hr|efr|amr) (hr|efr|amr) (hr|efr|amr)'>
      <params>
        <param name='codec-support' doc='Codec Support settings' />
        <param name='fr' doc='Fullrate' />
        <param name='hr' doc='Half Rate' />
        <param name='efr' doc='Enhanced Full Rate' />
        <param name='amr' doc='Adaptive Multirate' />
        <param name='hr' doc='Half Rate' />
        <param name='efr' doc='Enhanced Full Rate' />
        <param name='amr' doc='Adaptive Multirate' />
        <param name='hr' doc='Half Rate' />
        <param name='efr' doc='Enhanced Full Rate' />
        <param name='amr' doc='Adaptive Multirate' />
        <param name='hr' doc='Half Rate' />
        <param name='efr' doc='Enhanced Full Rate' />
        <param name='amr' doc='Adaptive Multirate' />
      </params>
    </command>
    <command id='depends-on-bts &lt;0-255&gt;'>
      <params>
        <param name='depends-on-bts' doc='This BTS can only be started if another one is up' />
        <param name='&lt;0-255&gt;' doc='BTS Number' />
      </params>
    </command>
    <command id='depeneds-on-bts &lt;0-255&gt;'>
      <params>
        <param name='depeneds-on-bts' doc='Negate a command or set its defaults' />
        <param name='&lt;0-255&gt;' doc='This BTS can only be started if another one is up' />
      </params>
    </command>
    <command id='amr tch-f modes (0|1|2|3|4|5|6|7)'>
      <params>
        <param name='amr' doc='Adaptive Multi Rate settings' />
        <param name='tch-f' doc='Full Rate' />
        <param name='modes' doc='Codec modes to use with AMR codec' />
        <param name='0' doc='4,75k' />
        <param name='1' doc='5,15k' />
        <param name='2' doc='5,90k' />
        <param name='3' doc='6,70k' />
        <param name='4' doc='7,40k' />
        <param name='5' doc='7,95k' />
        <param name='6' doc='10,2k' />
        <param name='7' doc='12,2k' />
      </params>
    </command>
    <command id='amr tch-f modes (0|1|2|3|4|5|6|7) (0|1|2|3|4|5|6|7)'>
      <params>
        <param name='amr' doc='Adaptive Multi Rate settings' />
        <param name='tch-f' doc='Full Rate' />
        <param name='modes' doc='Codec modes to use with AMR codec' />
        <param name='0' doc='4,75k' />
        <param name='1' doc='5,15k' />
        <param name='2' doc='5,90k' />
        <param name='3' doc='6,70k' />
        <param name='4' doc='7,40k' />
        <param name='5' doc='7,95k' />
        <param name='6' doc='10,2k' />
        <param name='7' doc='12,2k' />
        <param name='0' doc='4,75k' />
        <param name='1' doc='5,15k' />
        <param name='2' doc='5,90k' />
        <param name='3' doc='6,70k' />
        <param name='4' doc='7,40k' />
        <param name='5' doc='7,95k' />
        <param name='6' doc='10,2k' />
        <param name='7' doc='12,2k' />
      </params>
    </command>
    <command id='amr tch-f modes (0|1|2|3|4|5|6|7) (0|1|2|3|4|5|6|7) (0|1|2|3|4|5|6|7)'>
      <params>
        <param name='amr' doc='Adaptive Multi Rate settings' />
        <param name='tch-f' doc='Full Rate' />
        <param name='modes' doc='Codec modes to use with AMR codec' />
        <param name='0' doc='4,75k' />
        <param name='1' doc='5,15k' />
        <param name='2' doc='5,90k' />
        <param name='3' doc='6,70k' />
        <param name='4' doc='7,40k' />
        <param name='5' doc='7,95k' />
        <param name='6' doc='10,2k' />
        <param name='7' doc='12,2k' />
        <param name='0' doc='4,75k' />
        <param name='1' doc='5,15k' />
        <param name='2' doc='5,90k' />
        <param name='3' doc='6,70k' />
        <param name='4' doc='7,40k' />
        <param name='5' doc='7,95k' />
        <param name='6' doc='10,2k' />
        <param name='7' doc='12,2k' />
        <param name='0' doc='4,75k' />
        <param name='1' doc='5,15k' />
        <param name='2' doc='5,90k' />
        <param name='3' doc='6,70k' />
        <param name='4' doc='7,40k' />
        <param name='5' doc='7,95k' />
        <param name='6' doc='10,2k' />
        <param name='7' doc='12,2k' />
      </params>
    </command>
    <command id='amr tch-f modes (0|1|2|3|4|5|6|7) (0|1|2|3|4|5|6|7) (0|1|2|3|4|5|6|7) (0|1|2|3|4|5|6|7)'>
      <params>
        <param name='amr' doc='Adaptive Multi Rate settings' />
        <param name='tch-f' doc='Full Rate' />
        <param name='modes' doc='Codec modes to use with AMR codec' />
        <param name='0' doc='4,75k' />
        <param name='1' doc='5,15k' />
        <param name='2' doc='5,90k' />
        <param name='3' doc='6,70k' />
        <param name='4' doc='7,40k' />
        <param name='5' doc='7,95k' />
        <param name='6' doc='10,2k' />
        <param name='7' doc='12,2k' />
        <param name='0' doc='4,75k' />
        <param name='1' doc='5,15k' />
        <param name='2' doc='5,90k' />
        <param name='3' doc='6,70k' />
        <param name='4' doc='7,40k' />
        <param name='5' doc='7,95k' />
        <param name='6' doc='10,2k' />
        <param name='7' doc='12,2k' />
        <param name='0' doc='4,75k' />
        <param name='1' doc='5,15k' />
        <param name='2' doc='5,90k' />
        <param name='3' doc='6,70k' />
        <param name='4' doc='7,40k' />
        <param name='5' doc='7,95k' />
        <param name='6' doc='10,2k' />
        <param name='7' doc='12,2k' />
        <param name='0' doc='4,75k' />
        <param name='1' doc='5,15k' />
        <param name='2' doc='5,90k' />
        <param name='3' doc='6,70k' />
        <param name='4' doc='7,40k' />
        <param name='5' doc='7,95k' />
        <param name='6' doc='10,2k' />
        <param name='7' doc='12,2k' />
      </params>
    </command>
    <command id='amr tch-f threshold (ms|bts) &lt;0-63&gt;'>
      <params>
        <param name='amr' doc='Adaptive Multi Rate settings' />
        <param name='tch-f' doc='Full Rate' />
        <param name='threshold' doc='AMR threshold between codecs' />
        <param name='ms' doc='MS side' />
        <param name='bts' doc='BTS side' />
        <param name='&lt;0-63&gt;' doc='Threshold between codec 1 and 2' />
      </params>
    </command>
    <command id='amr tch-f threshold (ms|bts) &lt;0-63&gt; &lt;0-63&gt;'>
      <params>
        <param name='amr' doc='Adaptive Multi Rate settings' />
        <param name='tch-f' doc='Full Rate' />
        <param name='threshold' doc='AMR threshold between codecs' />
        <param name='ms' doc='MS side' />
        <param name='bts' doc='BTS side' />
        <param name='&lt;0-63&gt;' doc='Threshold between codec 1 and 2' />
        <param name='&lt;0-63&gt;' doc='Threshold between codec 1 and 2' />
      </params>
    </command>
    <command id='amr tch-f threshold (ms|bts) &lt;0-63&gt; &lt;0-63&gt; &lt;0-63&gt;'>
      <params>
        <param name='amr' doc='Adaptive Multi Rate settings' />
        <param name='tch-f' doc='Full Rate' />
        <param name='threshold' doc='AMR threshold between codecs' />
        <param name='ms' doc='MS side' />
        <param name='bts' doc='BTS side' />
        <param name='&lt;0-63&gt;' doc='Threshold between codec 1 and 2' />
        <param name='&lt;0-63&gt;' doc='Threshold between codec 1 and 2' />
        <param name='&lt;0-63&gt;' doc='Threshold between codec 1 and 2' />
      </params>
    </command>
    <command id='amr tch-f hysteresis (ms|bts) &lt;0-15&gt;'>
      <params>
        <param name='amr' doc='Adaptive Multi Rate settings' />
        <param name='tch-f' doc='Full Rate' />
        <param name='hysteresis' doc='AMR hysteresis between codecs' />
        <param name='ms' doc='MS side' />
        <param name='bts' doc='BTS side' />
        <param name='&lt;0-15&gt;' doc='Hysteresis between codec 1 and 2' />
      </params>
    </command>
    <command id='amr tch-f hysteresis (ms|bts) &lt;0-15&gt; &lt;0-15&gt;'>
      <params>
        <param name='amr' doc='Adaptive Multi Rate settings' />
        <param name='tch-f' doc='Full Rate' />
        <param name='hysteresis' doc='AMR hysteresis between codecs' />
        <param name='ms' doc='MS side' />
        <param name='bts' doc='BTS side' />
        <param name='&lt;0-15&gt;' doc='Hysteresis between codec 1 and 2' />
        <param name='&lt;0-15&gt;' doc='Hysteresis between codec 1 and 2' />
      </params>
    </command>
    <command id='amr tch-f hysteresis (ms|bts) &lt;0-15&gt; &lt;0-15&gt; &lt;0-15&gt;'>
      <params>
        <param name='amr' doc='Adaptive Multi Rate settings' />
        <param name='tch-f' doc='Full Rate' />
        <param name='hysteresis' doc='AMR hysteresis between codecs' />
        <param name='ms' doc='MS side' />
        <param name='bts' doc='BTS side' />
        <param name='&lt;0-15&gt;' doc='Hysteresis between codec 1 and 2' />
        <param name='&lt;0-15&gt;' doc='Hysteresis between codec 1 and 2' />
        <param name='&lt;0-15&gt;' doc='Hysteresis between codec 1 and 2' />
      </params>
    </command>
    <command id='amr tch-f start-mode (auto|1|2|3|4)'>
      <params>
        <param name='amr' doc='Adaptive Multi Rate settings' />
        <param name='tch-f' doc='Full Rate' />
        <param name='start-mode' doc='Initial codec to use with AMR' />
        <param name='auto' doc='Automatically' />
        <param name='1' doc='First codec' />
        <param name='2' doc='Second codec' />
        <param name='3' doc='Third codec' />
        <param name='4' doc='Fourth codec' />
      </params>
    </command>
    <command id='amr tch-h modes (0|1|2|3|4|5)'>
      <params>
        <param name='amr' doc='Adaptive Multi Rate settings' />
        <param name='tch-h' doc='Half Rate' />
        <param name='modes' doc='Codec modes to use with AMR codec' />
        <param name='0' doc='4,75k' />
        <param name='1' doc='5,15k' />
        <param name='2' doc='5,90k' />
        <param name='3' doc='6,70k' />
        <param name='4' doc='7,40k' />
        <param name='5' doc='7,95k' />
      </params>
    </command>
    <command id='amr tch-h modes (0|1|2|3|4|5) (0|1|2|3|4|5)'>
      <params>
        <param name='amr' doc='Adaptive Multi Rate settings' />
        <param name='tch-h' doc='Half Rate' />
        <param name='modes' doc='Codec modes to use with AMR codec' />
        <param name='0' doc='4,75k' />
        <param name='1' doc='5,15k' />
        <param name='2' doc='5,90k' />
        <param name='3' doc='6,70k' />
        <param name='4' doc='7,40k' />
        <param name='5' doc='7,95k' />
        <param name='0' doc='4,75k' />
        <param name='1' doc='5,15k' />
        <param name='2' doc='5,90k' />
        <param name='3' doc='6,70k' />
        <param name='4' doc='7,40k' />
        <param name='5' doc='7,95k' />
      </params>
    </command>
    <command id='amr tch-h modes (0|1|2|3|4|5) (0|1|2|3|4|5) (0|1|2|3|4|5)'>
      <params>
        <param name='amr' doc='Adaptive Multi Rate settings' />
        <param name='tch-h' doc='Half Rate' />
        <param name='modes' doc='Codec modes to use with AMR codec' />
        <param name='0' doc='4,75k' />
        <param name='1' doc='5,15k' />
        <param name='2' doc='5,90k' />
        <param name='3' doc='6,70k' />
        <param name='4' doc='7,40k' />
        <param name='5' doc='7,95k' />
        <param name='0' doc='4,75k' />
        <param name='1' doc='5,15k' />
        <param name='2' doc='5,90k' />
        <param name='3' doc='6,70k' />
        <param name='4' doc='7,40k' />
        <param name='5' doc='7,95k' />
        <param name='0' doc='4,75k' />
        <param name='1' doc='5,15k' />
        <param name='2' doc='5,90k' />
        <param name='3' doc='6,70k' />
        <param name='4' doc='7,40k' />
        <param name='5' doc='7,95k' />
      </params>
    </command>
    <command id='amr tch-h modes (0|1|2|3|4|5) (0|1|2|3|4|5) (0|1|2|3|4|5) (0|1|2|3|4|5)'>
      <params>
        <param name='amr' doc='Adaptive Multi Rate settings' />
        <param name='tch-h' doc='Half Rate' />
        <param name='modes' doc='Codec modes to use with AMR codec' />
        <param name='0' doc='4,75k' />
        <param name='1' doc='5,15k' />
        <param name='2' doc='5,90k' />
        <param name='3' doc='6,70k' />
        <param name='4' doc='7,40k' />
        <param name='5' doc='7,95k' />
        <param name='0' doc='4,75k' />
        <param name='1' doc='5,15k' />
        <param name='2' doc='5,90k' />
        <param name='3' doc='6,70k' />
        <param name='4' doc='7,40k' />
        <param name='5' doc='7,95k' />
        <param name='0' doc='4,75k' />
        <param name='1' doc='5,15k' />
        <param name='2' doc='5,90k' />
        <param name='3' doc='6,70k' />
        <param name='4' doc='7,40k' />
        <param name='5' doc='7,95k' />
        <param name='0' doc='4,75k' />
        <param name='1' doc='5,15k' />
        <param name='2' doc='5,90k' />
        <param name='3' doc='6,70k' />
        <param name='4' doc='7,40k' />
        <param name='5' doc='7,95k' />
      </params>
    </command>
    <command id='amr tch-h threshold (ms|bts) &lt;0-63&gt;'>
      <params>
        <param name='amr' doc='Adaptive Multi Rate settings' />
        <param name='tch-h' doc='Half Rate' />
        <param name='threshold' doc='AMR threshold between codecs' />
        <param name='ms' doc='MS side' />
        <param name='bts' doc='BTS side' />
        <param name='&lt;0-63&gt;' doc='Threshold between codec 1 and 2' />
      </params>
    </command>
    <command id='amr tch-h threshold (ms|bts) &lt;0-63&gt; &lt;0-63&gt;'>
      <params>
        <param name='amr' doc='Adaptive Multi Rate settings' />
        <param name='tch-h' doc='Half Rate' />
        <param name='threshold' doc='AMR threshold between codecs' />
        <param name='ms' doc='MS side' />
        <param name='bts' doc='BTS side' />
        <param name='&lt;0-63&gt;' doc='Threshold between codec 1 and 2' />
        <param name='&lt;0-63&gt;' doc='Threshold between codec 1 and 2' />
      </params>
    </command>
    <command id='amr tch-h threshold (ms|bts) &lt;0-63&gt; &lt;0-63&gt; &lt;0-63&gt;'>
      <params>
        <param name='amr' doc='Adaptive Multi Rate settings' />
        <param name='tch-h' doc='Half Rate' />
        <param name='threshold' doc='AMR threshold between codecs' />
        <param name='ms' doc='MS side' />
        <param name='bts' doc='BTS side' />
        <param name='&lt;0-63&gt;' doc='Threshold between codec 1 and 2' />
        <param name='&lt;0-63&gt;' doc='Threshold between codec 1 and 2' />
        <param name='&lt;0-63&gt;' doc='Threshold between codec 1 and 2' />
      </params>
    </command>
    <command id='amr tch-h hysteresis (ms|bts) &lt;0-15&gt;'>
      <params>
        <param name='amr' doc='Adaptive Multi Rate settings' />
        <param name='tch-h' doc='Half Rate' />
        <param name='hysteresis' doc='AMR hysteresis between codecs' />
        <param name='ms' doc='MS side' />
        <param name='bts' doc='BTS side' />
        <param name='&lt;0-15&gt;' doc='Hysteresis between codec 1 and 2' />
      </params>
    </command>
    <command id='amr tch-h hysteresis (ms|bts) &lt;0-15&gt; &lt;0-15&gt;'>
      <params>
        <param name='amr' doc='Adaptive Multi Rate settings' />
        <param name='tch-h' doc='Half Rate' />
        <param name='hysteresis' doc='AMR hysteresis between codecs' />
        <param name='ms' doc='MS side' />
        <param name='bts' doc='BTS side' />
        <param name='&lt;0-15&gt;' doc='Hysteresis between codec 1 and 2' />
        <param name='&lt;0-15&gt;' doc='Hysteresis between codec 1 and 2' />
      </params>
    </command>
    <command id='amr tch-h hysteresis (ms|bts) &lt;0-15&gt; &lt;0-15&gt; &lt;0-15&gt;'>
      <params>
        <param name='amr' doc='Adaptive Multi Rate settings' />
        <param name='tch-h' doc='Half Rate' />
        <param name='hysteresis' doc='AMR hysteresis between codecs' />
        <param name='ms' doc='MS side' />
        <param name='bts' doc='BTS side' />
        <param name='&lt;0-15&gt;' doc='Hysteresis between codec 1 and 2' />
        <param name='&lt;0-15&gt;' doc='Hysteresis between codec 1 and 2' />
        <param name='&lt;0-15&gt;' doc='Hysteresis between codec 1 and 2' />
      </params>
    </command>
    <command id='amr tch-h start-mode (auto|1|2|3|4)'>
      <params>
        <param name='amr' doc='Adaptive Multi Rate settings' />
        <param name='tch-h' doc='Half Rate' />
        <param name='start-mode' doc='Initial codec to use with AMR' />
        <param name='auto' doc='Automatically' />
        <param name='1' doc='First codec' />
        <param name='2' doc='Second codec' />
        <param name='3' doc='Third codec' />
        <param name='4' doc='Fourth codec' />
      </params>
    </command>
    <command id='pcu-socket PATH'>
      <params>
        <param name='pcu-socket' doc='PCU Socket Path for using OsmoPCU co-located with BSC (legacy BTS)' />
        <param name='PATH' doc='Path in the file system for the unix-domain PCU socket' />
      </params>
    </command>
    <command id='access-control-class-ramping'>
      <params>
        <param name='access-control-class-ramping' doc='Enable Access Control Class ramping' />
      </params>
    </command>
    <command id='no access-control-class-ramping'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='access-control-class-ramping' doc='Disable Access Control Class ramping' />
      </params>
    </command>
    <command id='access-control-class-ramping-step-interval (&lt;30-600&gt;|dynamic)'>
      <params>
        <param name='access-control-class-ramping-step-interval' doc='Configure Access Control Class ramping step interval' />
        <param name='&lt;30-600&gt;' doc='Set a fixed step interval (in seconds)' />
        <param name='dynamic' doc='Use dynamic step interval based on BTS channel load' />
      </params>
    </command>
    <command id='access-control-class-ramping-step-size (&lt;1-10&gt;)'>
      <params>
        <param name='access-control-class-ramping-step-size' doc='Configure Access Control Class ramping step size' />
        <param name='&lt;1-10&gt;' doc='Set the number of Access Control Classes to enable per ramping step' />
      </params>
    </command>
    <command id='trx &lt;0-255&gt;'>
      <params>
        <param name='trx' doc='Radio Transceiver' />
        <param name='&lt;0-255&gt;' doc='Select a TRX to configure' />
      </params>
    </command>
    <command id='is-connection-list (add|del) &lt;0-2047&gt; &lt;0-2047&gt; &lt;0-255&gt;'>
      <params>
        <param name='is-connection-list' doc='Interface Switch Connection List' />
        <param name='add' doc='Add to IS list' />
        <param name='del' doc='Delete from IS list' />
        <param name='&lt;0-2047&gt;' doc='ICP1' />
        <param name='&lt;0-2047&gt;' doc='ICP2' />
        <param name='&lt;0-255&gt;' doc='Contiguity Index' />
      </params>
    </command>
    <command id='abis-lower-transport (single-timeslot|super-channel)'>
      <params>
        <param name='abis-lower-transport' doc='Configure thee Abis Lower Transport' />
        <param name='single-timeslot' doc='Single Timeslot (classic Abis)' />
        <param name='super-channel' doc='SuperChannel (Packet Abis)' />
      </params>
    </command>
    <command id='con-connection-group &lt;1-31&gt;'>
      <params>
        <param name='con-connection-group' doc='Configure a CON (Concentrator) Connection Group' />
        <param name='&lt;1-31&gt;' doc='CON Connection Group Number' />
      </params>
    </command>
    <command id='del-connection-group &lt;1-31&gt;'>
      <params>
        <param name='del-connection-group' doc='Delete a CON (Concentrator) Connection Group' />
        <param name='&lt;1-31&gt;' doc='CON Connection Group Number' />
      </params>
    </command>
  </node>
  <node id='config-net-bts-trx'>
    <name>config-net-bts-trx</name>
    <command id='arfcn &lt;0-1023&gt;'>
      <params>
        <param name='arfcn' doc='Set the ARFCN for this TRX' />
        <param name='&lt;0-1023&gt;' doc='Absolute Radio Frequency Channel Number' />
      </params>
    </command>
    <command id='description .TEXT'>
      <params>
        <param name='description' doc='Save human-readable description of the object' />
        <param name='.TEXT' doc='Text until the end of the line' />
      </params>
    </command>
    <command id='no description'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='description' doc='Remove description of the object' />
      </params>
    </command>
    <command id='nominal power &lt;0-100&gt;'>
      <params>
        <param name='nominal' doc='Nominal TRX RF Power in dBm' />
        <param name='power' doc='Nominal TRX RF Power in dBm' />
        <param name='&lt;0-100&gt;' doc='Nominal TRX RF Power in dBm' />
      </params>
    </command>
    <command id='max_power_red &lt;0-100&gt;'>
      <params>
        <param name='max_power_red' doc='Reduction of maximum BS RF Power (relative to nominal power)' />
        <param name='&lt;0-100&gt;' doc='Reduction of maximum BS RF Power in dB' />
      </params>
    </command>
    <command id='rsl e1 line E1_LINE timeslot &lt;1-31&gt; sub-slot (0|1|2|3|full)'>
      <params>
        <param name='rsl' doc='RSL Parameters' />
        <param name='e1' doc='E1/T1 interface to be used for RSL' />
        <param name='line' doc='E1/T1 interface to be used for RSL' />
        <param name='E1_LINE' doc='E1/T1 Line Number to be used for RSL' />
        <param name='timeslot' doc='E1/T1 Timeslot to be used for RSL' />
        <param name='&lt;1-31&gt;' doc='E1/T1 Timeslot to be used for RSL' />
        <param name='sub-slot' doc='E1/T1 Sub-slot to be used for RSL' />
        <param name='0' doc='E1/T1 Sub-slot 0 is to be used for RSL' />
        <param name='1' doc='E1/T1 Sub-slot 1 is to be used for RSL' />
        <param name='2' doc='E1/T1 Sub-slot 2 is to be used for RSL' />
        <param name='3' doc='E1/T1 Sub-slot 3 is to be used for RSL' />
        <param name='full' doc='E1/T1 full timeslot is to be used for RSL' />
      </params>
    </command>
    <command id='rsl e1 tei &lt;0-63&gt;'>
      <params>
        <param name='rsl' doc='RSL Parameters' />
        <param name='e1' doc='Set the TEI to be used for RSL' />
        <param name='tei' doc='Set the TEI to be used for RSL' />
        <param name='&lt;0-63&gt;' doc='TEI to be used for RSL' />
      </params>
    </command>
    <command id='rf_locked (0|1)'>
      <params>
        <param name='rf_locked' doc='Set or unset the RF Locking (Turn off RF of the TRX)' />
        <param name='0' doc='TRX is NOT RF locked (active)' />
        <param name='1' doc='TRX is RF locked (turned off)' />
      </params>
    </command>
    <command id='timeslot &lt;0-7&gt;'>
      <params>
        <param name='timeslot' doc='Select a Timeslot to configure' />
        <param name='&lt;0-7&gt;' doc='Timeslot number' />
      </params>
    </command>
  </node>
  <node id='config-net-bts-trx-ts'>
    <name>config-net-bts-trx-ts</name>
    <command id='phys_chan_config (none|ccch|ccch+sdcch4|tch/f|tch/h|sdcch8|pdch|tch/f_pdch|unknown|ccch+sdcch4+cbch|sdcch8+cbch|tch/f_tch/h_pdch)'>
      <params>
        <param name='phys_chan_config' doc='Physical Channel Combination' />
        <param name='none' doc='Physical Channel not configured' />
        <param name='ccch' doc='FCCH + SCH + BCCH + CCCH (Comb. IV)' />
        <param name='ccch+sdcch4' doc='FCCH + SCH + BCCH + CCCH + 4 SDCCH + 2 SACCH (Comb. V)' />
        <param name='tch/f' doc='TCH/F + FACCH/F + SACCH (Comb. I)' />
        <param name='tch/h' doc='2 TCH/H + 2 FACCH/H + 2 SACCH (Comb. II)' />
        <param name='sdcch8' doc='8 SDCCH + 4 SACCH (Comb. VII)' />
        <param name='pdch' doc='Packet Data Channel for GPRS/EDGE' />
        <param name='tch/f_pdch' doc='Dynamic TCH/F or GPRS PDCH' />
        <param name='unknown' doc='Unknown / Unsupported channel combination' />
        <param name='ccch+sdcch4+cbch' doc='FCCH + SCH + BCCH + CCCH + CBCH + 3 SDCCH + 2 SACCH (Comb. V)' />
        <param name='sdcch8+cbch' doc='7 SDCCH + 4 SACCH + CBCH (Comb. VII)' />
        <param name='tch/f_tch/h_pdch' doc='Dynamic TCH/F or TCH/H or GPRS PDCH' />
      </params>
    </command>
    <command id='training_sequence_code &lt;0-7&gt;'>
      <params>
        <param name='training_sequence_code' doc='Training Sequence Code of the Timeslot' />
        <param name='&lt;0-7&gt;' doc='TSC' />
      </params>
    </command>
    <command id='hopping enabled (0|1)'>
      <params>
        <param name='hopping' doc='Configure frequency hopping' />
        <param name='enabled' doc='Enable or disable frequency hopping' />
        <param name='0' doc='Disable frequency hopping' />
        <param name='1' doc='Enable frequency hopping' />
      </params>
    </command>
    <command id='hopping sequence-number &lt;0-63&gt;'>
      <params>
        <param name='hopping' doc='Configure frequency hopping' />
        <param name='sequence-number' doc='Which hopping sequence to use for this channel' />
        <param name='&lt;0-63&gt;' doc='Hopping Sequence Number (HSN)' />
      </params>
    </command>
    <command id='hopping maio &lt;0-63&gt;'>
      <params>
        <param name='hopping' doc='Configure frequency hopping' />
        <param name='maio' doc='Which hopping MAIO to use for this channel' />
        <param name='&lt;0-63&gt;' doc='Mobile Allocation Index Offset (MAIO)' />
      </params>
    </command>
    <command id='hopping arfcn add &lt;0-1023&gt;'>
      <params>
        <param name='hopping' doc='Configure frequency hopping' />
        <param name='arfcn' doc='Configure hopping ARFCN list' />
        <param name='add' doc='Add an entry to the hopping ARFCN list' />
        <param name='&lt;0-1023&gt;' doc='ARFCN' />
      </params>
    </command>
    <command id='hopping arfcn del &lt;0-1023&gt;'>
      <params>
        <param name='hopping' doc='Configure frequency hopping' />
        <param name='arfcn' doc='Configure hopping ARFCN list' />
        <param name='del' doc='Delete an entry to the hopping ARFCN list' />
        <param name='&lt;0-1023&gt;' doc='ARFCN' />
      </params>
    </command>
    <command id='e1 line E1_LINE timeslot &lt;1-31&gt; sub-slot (0|1|2|3|full)'>
      <params>
        <param name='e1' doc='E1/T1 channel connected to this on-air timeslot' />
        <param name='line' doc='E1/T1 channel connected to this on-air timeslot' />
        <param name='E1_LINE' doc='E1/T1 line connected to this on-air timeslot' />
        <param name='timeslot' doc='E1/T1 timeslot connected to this on-air timeslot' />
        <param name='&lt;1-31&gt;' doc='E1/T1 timeslot connected to this on-air timeslot' />
        <param name='sub-slot' doc='E1/T1 sub-slot connected to this on-air timeslot' />
        <param name='0' doc='E1/T1 sub-slot 0 connected to this on-air timeslot' />
        <param name='1' doc='E1/T1 sub-slot 1 connected to this on-air timeslot' />
        <param name='2' doc='E1/T1 sub-slot 2 connected to this on-air timeslot' />
        <param name='3' doc='E1/T1 sub-slot 3 connected to this on-air timeslot' />
        <param name='full' doc='Full E1/T1 timeslot connected to this on-air timeslot' />
      </params>
    </command>
  </node>
  <node id='oml'>
    <name>oml</name>
    <command id='change-adm-state (locked|unlocked|shutdown|null)'>
      <params>
        <param name='change-adm-state' doc='Change the Administrative State' />
        <param name='locked' doc='Locked' />
        <param name='unlocked' doc='Unlocked' />
        <param name='shutdown' doc='Shutdown' />
        <param name='null' doc='NULL' />
      </params>
    </command>
    <command id='opstart'>
      <params>
        <param name='opstart' doc='Send an OPSTART message to the object' />
      </params>
    </command>
  </node>
  <node id='om2k'>
    <name>om2k</name>
    <command id='reset-command'>
      <params>
        <param name='reset-command' doc='Reset the MO' />
      </params>
    </command>
    <command id='start-request'>
      <params>
        <param name='start-request' doc='Start the MO' />
      </params>
    </command>
    <command id='status-request'>
      <params>
        <param name='status-request' doc='Get the MO Status' />
      </params>
    </command>
    <command id='connect-command'>
      <params>
        <param name='connect-command' doc='Connect the MO' />
      </params>
    </command>
    <command id='disconnect-command'>
      <params>
        <param name='disconnect-command' doc='Disconnect the MO' />
      </params>
    </command>
    <command id='enable-request'>
      <params>
        <param name='enable-request' doc='Enable the MO' />
      </params>
    </command>
    <command id='disable-request'>
      <params>
        <param name='disable-request' doc='Disable the MO' />
      </params>
    </command>
    <command id='operational-info &lt;0-1&gt;'>
      <params>
        <param name='operational-info' doc='Set operational information' />
        <param name='&lt;0-1&gt;' doc='Set operational info to 0 or 1' />
      </params>
    </command>
    <command id='test-request'>
      <params>
        <param name='test-request' doc='Test the MO' />
      </params>
    </command>
    <command id='capabilities-request'>
      <params>
        <param name='capabilities-request' doc='Request MO capabilities' />
      </params>
    </command>
    <command id='configuration-request'>
      <params>
        <param name='configuration-request' doc='Send the configuration request for current MO' />
      </params>
    </command>
  </node>
  <node id='om2k-con-group'>
    <name>om2k-con-group</name>
    <command id='con-path (add|del) &lt;0-2047&gt; &lt;0-255&gt; deconcentrated &lt;0-63&gt;'>
      <params>
        <param name='con-path' doc='CON Path (In/Out)' />
        <param name='add' doc='Add CON Path to Concentration Group' />
        <param name='del' doc='Delete CON Path from Concentration Group' />
        <param name='&lt;0-2047&gt;' doc='CON Conection Point' />
        <param name='&lt;0-255&gt;' doc='Contiguity Index' />
        <param name='deconcentrated' doc='De-concentrated in/outlet' />
        <param name='&lt;0-63&gt;' doc='TEI Value' />
      </params>
    </command>
    <command id='con-path (add|del) &lt;0-2047&gt; &lt;0-255&gt; concentrated &lt;1-16&gt;'>
      <params>
        <param name='con-path' doc='CON Path (In/Out)' />
        <param name='add' doc='Add CON Path to Concentration Group' />
        <param name='del' doc='Delete CON Path from Concentration Group' />
        <param name='&lt;0-2047&gt;' doc='CON Conection Point' />
        <param name='&lt;0-255&gt;' doc='Contiguity Index' />
        <param name='concentrated' doc='Concentrated in/outlet' />
        <param name='&lt;1-16&gt;' doc='Tag Number' />
      </params>
    </command>
  </node>
  <node id='config-mncc-int'>
    <name>config-mncc-int</name>
    <command id='default-codec tch-f (fr|efr|amr)'>
      <params>
        <param name='default-codec' doc='Set default codec' />
        <param name='tch-f' doc='Codec for TCH/F' />
        <param name='fr' doc='Full-Rate' />
        <param name='efr' doc='Enhanced Full-Rate' />
        <param name='amr' doc='Adaptive Multi-Rate' />
      </params>
    </command>
    <command id='default-codec tch-h (hr|amr)'>
      <params>
        <param name='default-codec' doc='Set default codec' />
        <param name='tch-h' doc='Codec for TCH/H' />
        <param name='hr' doc='Half-Rate' />
        <param name='amr' doc='Adaptive Multi-Rate' />
      </params>
    </command>
    <command id='meas-feed destination ADDR &lt;0-65535&gt;'>
      <params>
        <param name='meas-feed' doc='Measurement export related' />
        <param name='destination' doc='destination' />
        <param name='ADDR' doc='address or hostname' />
        <param name='&lt;0-65535&gt;' doc='port number' />
      </params>
    </command>
    <command id='meas-feed scenario NAME'>
      <params>
        <param name='meas-feed' doc='Measurement export related' />
        <param name='scenario' doc='scenario' />
        <param name='NAME' doc='Name up to 31 characters included in report' />
      </params>
    </command>
  </node>
  <node id='config-nitb'>
    <name>config-nitb</name>
    <command id='subscriber-create-on-demand [no-extension]'>
      <params>
        <param name='subscriber-create-on-demand' doc='Make a new record when a subscriber is first seen.' />
        <param name='[no-extension]' doc='Do not automatically assign extension to created subscribers' />
      </params>
    </command>
    <command id='subscriber-create-on-demand random &lt;1-9999999999&gt; &lt;2-9999999999&gt;'>
      <params>
        <param name='subscriber-create-on-demand' doc='Set random parameters for a new record when a subscriber is first seen.' />
        <param name='random' doc='Set random parameters for a new record when a subscriber is first seen.' />
        <param name='&lt;1-9999999999&gt;' doc='Minimum for subscriber extension' />
        <param name='&lt;2-9999999999&gt;' doc='Maximum for subscriber extension' />
      </params>
    </command>
    <command id='no subscriber-create-on-demand'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='subscriber-create-on-demand' doc='Make a new record when a subscriber is first seen.' />
      </params>
    </command>
    <command id='assign-tmsi'>
      <params>
        <param name='assign-tmsi' doc='Assign TMSI during Location Updating.' />
      </params>
    </command>
    <command id='no assign-tmsi'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='assign-tmsi' doc='Assign TMSI during Location Updating.' />
      </params>
    </command>
  </node>
  <node id='config-smpp'>
    <name>config-smpp</name>
    <command id='smpp-first'>
      <params>
        <param name='smpp-first' doc='Try SMPP routes before the subscriber DB' />
      </params>
    </command>
    <command id='no smpp-first'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='smpp-first' doc='Try SMPP before routes before the subscriber DB' />
      </params>
    </command>
    <command id='local-tcp-port &lt;1-65535&gt;'>
      <params>
        <param name='local-tcp-port' doc='Set the local TCP port on which we listen for SMPP' />
        <param name='&lt;1-65535&gt;' doc='TCP port number' />
      </params>
    </command>
    <command id='local-tcp-ip A.B.C.D &lt;1-65535&gt;'>
      <params>
        <param name='local-tcp-ip' doc='Set the local IP address and TCP port on which we listen for SMPP' />
        <param name='A.B.C.D' doc='Local IP address' />
        <param name='&lt;1-65535&gt;' doc='TCP port number' />
      </params>
    </command>
    <command id='system-id ID'>
      <params>
        <param name='system-id' doc='Set the System ID of this SMSC' />
        <param name='ID' doc='Alphanumeric SMSC System ID' />
      </params>
    </command>
    <command id='policy (accept-all|closed)'>
      <params>
        <param name='policy' doc='Set the authentication policy of this SMSC' />
        <param name='accept-all' doc='Accept all SMPP connections independent of system ID / password' />
        <param name='closed' doc='Accept only SMPP connections from ESMEs explicitly configured' />
      </params>
    </command>
    <command id='esme NAME'>
      <params>
        <param name='esme' doc='Configure a particular ESME' />
        <param name='NAME' doc='Alphanumeric System ID of the ESME to be configured' />
      </params>
    </command>
    <command id='no esme NAME'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='esme' doc='Remove ESME configuration' />
        <param name='NAME' doc='Alphanumeric System ID of the ESME to be removed' />
      </params>
    </command>
  </node>
  <node id='config-smpp-esme'>
    <name>config-smpp-esme</name>
    <command id='password PASSWORD'>
      <params>
        <param name='password' doc='Set the password for this ESME' />
        <param name='PASSWORD' doc='Alphanumeric password string' />
      </params>
    </command>
    <command id='no password'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='password' doc='Remove the password for this ESME' />
      </params>
    </command>
    <command id='route prefix (unknown|international|national|network|subscriber|alpha|abbrev) (unknown|isdn|x121|f69|e212|national|private|ermes|ip|wap) PREFIX'>
      <params>
        <param name='route' doc='Configure a route for MO-SMS to be sent to this ESME' />
        <param name='prefix' doc='Prefix-match route' />
        <param name='unknown' doc='Unknown type-of-number' />
        <param name='international' doc='International type-of-number' />
        <param name='national' doc='National type-of-number' />
        <param name='network' doc='Network specific type-of-number' />
        <param name='subscriber' doc='Subscriber type-of-number' />
        <param name='alpha' doc='Alphanumeric type-of-number' />
        <param name='abbrev' doc='Abbreviated type-of-number' />
        <param name='unknown' doc='Unknown numbering plan' />
        <param name='isdn' doc='ISDN (E.164) numbering plan' />
        <param name='x121' doc='X.121 numbering plan' />
        <param name='f69' doc='F.69 numbering plan' />
        <param name='e212' doc='E.212 numbering plan' />
        <param name='national' doc='National numbering plan' />
        <param name='private' doc='Private numbering plan' />
        <param name='ermes' doc='ERMES numbering plan' />
        <param name='ip' doc='IP numbering plan' />
        <param name='wap' doc='WAP numbeing plan' />
        <param name='PREFIX' doc='Destination number prefix' />
      </params>
    </command>
    <command id='no route prefix (unknown|international|national|network|subscriber|alpha|abbrev) (unknown|isdn|x121|f69|e212|national|private|ermes|ip|wap) PREFIX'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='route' doc='Configure a route for MO-SMS to be sent to this ESME' />
        <param name='prefix' doc='Prefix-match route' />
        <param name='unknown' doc='Unknown type-of-number' />
        <param name='international' doc='International type-of-number' />
        <param name='national' doc='National type-of-number' />
        <param name='network' doc='Network specific type-of-number' />
        <param name='subscriber' doc='Subscriber type-of-number' />
        <param name='alpha' doc='Alphanumeric type-of-number' />
        <param name='abbrev' doc='Abbreviated type-of-number' />
        <param name='unknown' doc='Unknown numbering plan' />
        <param name='isdn' doc='ISDN (E.164) numbering plan' />
        <param name='x121' doc='X.121 numbering plan' />
        <param name='f69' doc='F.69 numbering plan' />
        <param name='e212' doc='E.212 numbering plan' />
        <param name='national' doc='National numbering plan' />
        <param name='private' doc='Private numbering plan' />
        <param name='ermes' doc='ERMES numbering plan' />
        <param name='ip' doc='IP numbering plan' />
        <param name='wap' doc='WAP numbeing plan' />
        <param name='PREFIX' doc='Destination number prefix' />
      </params>
    </command>
    <command id='default-route'>
      <params>
        <param name='default-route' doc='Set this ESME as default-route for all SMS to unknown destinations' />
      </params>
    </command>
    <command id='no default-route'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='default-route' doc='Remove this ESME as default-route for all SMS to unknown destinations' />
      </params>
    </command>
    <command id='deliver-src-imsi'>
      <params>
        <param name='deliver-src-imsi' doc='Enable the use of IMSI as source address in DELIVER' />
      </params>
    </command>
    <command id='no deliver-src-imsi'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='deliver-src-imsi' doc='Disable the use of IMSI as source address in DELIVER' />
      </params>
    </command>
    <command id='osmocom-extensions'>
      <params>
        <param name='osmocom-extensions' doc='Enable the use of Osmocom SMPP Extensions for this ESME' />
      </params>
    </command>
    <command id='no osmocom-extensions'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='osmocom-extensions' doc='Disable the use of Osmocom SMPP Extensions for this ESME' />
      </params>
    </command>
    <command id='dcs-transparent'>
      <params>
        <param name='dcs-transparent' doc='Enable the transparent pass-through of TP-DCS to SMPP DataCoding' />
      </params>
    </command>
    <command id='no dcs-transparent'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='dcs-transparent' doc='Disable the transparent pass-through of TP-DCS to SMPP DataCoding' />
      </params>
    </command>
    <command id='alert-notifications'>
      <params>
        <param name='alert-notifications' doc='Disable sending of SMPP Alert Notifications for this ESME' />
      </params>
    </command>
    <command id='no alert-notifications'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='alert-notifications' doc='Disable sending of SMPP Alert Notifications for this ESME' />
      </params>
    </command>
  </node>
</vtydoc>
