#++ # NAME # mysql_table 5 # SUMMARY # Postfix MySQL client configuration # SYNOPSIS # \fBpostmap -q "\fIstring\fB" mysql:/etc/postfix/\fIfilename\fR # # \fBpostmap -q - mysql:/etc/postfix/\fIfilename\fB <\fIinputfile\fR # DESCRIPTION # The Postfix mail system uses optional tables for address # rewriting or mail routing. These tables are usually in # \fBdbm\fR or \fBdb\fR format. # # Alternatively, lookup tables can be specified as MySQL databases. # In order to use MySQL lookups, define a MySQL source as a lookup # table in main.cf, for example: # .nf # alias_maps = mysql:/etc/mysql-aliases.cf # .fi # # The file /etc/postfix/mysql-aliases.cf has the same format as # the Postfix main.cf file, and can specify the parameters # described below. # BACKWARDS COMPATIBILITY # .ad # .fi # For compatibility with other Postfix lookup tables, MySQL # parameters can also be defined in main.cf. In order to do that, # specify as MySQL source a name that doesn't begin with a slash # or a dot. The MySQL parameters will then be accessible as the # name you've given the source in its definition, an underscore, # and the name of the parameter. For example, if the map is # specified as "mysql:\fImysqlname\fR", the parameter "hosts" # below would be defined in main.cf as "\fImysqlname\fR_hosts". # # Note: with this form, the passwords for the MySQL sources are # written in main.cf, which is normally world-readable. Support # for this form will be removed in a future Postfix version. # # Normally, the SQL query is specified via a single \fBquery\fR # parameter (described in more detail below). When this # parameter is not specified in the map definition, Postfix # reverts to an older interface, with the SQL query constructed # from the \fBselect_field\fR, \fBtable\fR, \fBwhere_field\fR # and \fBadditional_conditions\fR parameters. The old interface # will be gradually phased out. To migrate to the new interface # set: # # .nf # \fBquery\fR = SELECT [\fIselect_field\fR] # FROM [\fItable\fR] # WHERE [\fIwhere_field\fR] = '%s' # [\fIadditional_conditions\fR] # .fi # # Insert the value, not the name, of each legacy parameter. Note # that the \fBadditional_conditions\fR parameter is optional # and if not empty, will always start with \fBAND\fR. # LIST MEMBERSHIP # .ad # .fi # When using SQL to store lists such as $mynetworks, # $mydestination, $relay_domains, $local_recipient_maps, # etc., it is important to understand that the table must # store each list member as a separate key. The table lookup # verifies the *existence* of the key. See "Postfix lists # versus tables" in the DATABASE_README document for a # discussion. # # Do NOT create tables that return the full list of domains # in $mydestination or $relay_domains etc., or IP addresses # in $mynetworks. # # DO create tables with each matching item as a key and with # an arbitrary value. With SQL databases it is not uncommon to # return the key itself or a constant value. # MYSQL PARAMETERS # .ad # .fi # .IP "\fBhosts\fR" # The hosts that Postfix will try to connect to and query from. # Specify \fIunix:\fR for UNIX domain sockets, \fIinet:\fR for TCP # connections (default). Example: # .nf # hosts = host1.some.domain host2.some.domain:port # hosts = unix:/file/name # .fi # # The hosts are tried in random order, with all connections over # UNIX domain sockets being tried before those over TCP. The # connections are automatically closed after being idle for about # 1 minute, and are re-opened as necessary. Postfix versions 2.0 # and earlier do not randomize the host order. # # NOTE: if you specify localhost as a hostname (even if you # prefix it with \fIinet:\fR), MySQL will connect to the default # UNIX domain socket. In order to instruct MySQL to connect to # localhost over TCP you have to specify # .nf # hosts = 127.0.0.1 # .fi # .IP "\fBuser, password\fR" # The user name and password to log into the mysql server. # Example: # .nf # user = someone # password = some_password # .fi # .IP "\fBdbname\fR" # The database name on the servers. Example: # .nf # dbname = customer_database # .fi # .IP "\fBquery\fR" # The SQL query template used to search the database, where \fB%s\fR # is a substitute for the address Postfix is trying to resolve, # e.g. # .nf # query = SELECT replacement FROM aliases WHERE mailbox = '%s' # .fi # # This parameter supports the following '%' expansions: # .RS # .IP "\fB%%\fR" # This is replaced by a literal '%' character. # .IP "\fB%s\fR" # This is replaced by the input key. # SQL quoting is used to make sure that the input key does not # add unexpected metacharacters. # .IP "\fB%u\fR" # When the input key is an address of the form user@domain, \fB%u\fR # is replaced by the SQL quoted local part of the address. # Otherwise, \fB%u\fR is replaced by the entire search string. # If the localpart is empty, the query is suppressed and returns # no results. # .IP "\fB%d\fR" # When the input key is an address of the form user@domain, \fB%d\fR # is replaced by the SQL quoted domain part of the address. # Otherwise, the query is suppressed and returns no results. # .IP "\fB%[SUD]\fR" # The upper-case equivalents of the above expansions behave in the # \fBquery\fR parameter identically to their lower-case counter-parts. # With the \fBresult_format\fR parameter (see below), they expand the # input key rather than the result value. # .IP "\fB%[1-9]\fR" # The patterns %1, %2, ... %9 are replaced by the corresponding # most significant component of the input key's domain. If the # input key is \fIuser@mail.example.com\fR, then %1 is \fBcom\fR, # %2 is \fBexample\fR and %3 is \fBmail\fR. If the input key is # unqualified or does not have enough domain components to satisfy # all the specified patterns, the query is suppressed and returns # no results. # .RE # .IP # The \fBdomain\fR parameter described below limits the input # keys to addresses in matching domains. When the \fBdomain\fR # parameter is non-empty, SQL queries for unqualified addresses # or addresses in non-matching domains are suppressed # and return no results. # # This parameter is available with Postfix 2.2. In prior releases # the SQL query was built from the separate parameters: # \fBselect_field\fR, \fBtable\fR, \fBwhere_field\fR and # \fBadditional_conditions\fR. The mapping from the old parameters # to the equivalent query is: # # .nf # SELECT [\fBselect_field\fR] # FROM [\fBtable\fR] # WHERE [\fBwhere_field\fR] = '%s' # [\fBadditional_conditions\fR] # .fi # # The '%s' in the \fBWHERE\fR clause expands to the escaped search string. # With Postfix 2.2 these legacy parameters are used if the \fBquery\fR # parameter is not specified. # # NOTE: DO NOT put quotes around the query parameter. # .IP "\fBresult_format (default: \fB%s\fR)\fR" # Format template applied to result attributes. Most commonly used # to append (or prepend) text to the result. This parameter supports # the following '%' expansions: # .RS # .IP "\fB%%\fR" # This is replaced by a literal '%' character. # .IP "\fB%s\fR" # This is replaced by the value of the result attribute. When # result is empty it is skipped. # .IP "\fB%u\fR # When the result attribute value is an address of the form # user@domain, \fB%u\fR is replaced by the local part of the # address. When the result has an empty localpart it is skipped. # .IP "\fB%d\fR" # When a result attribute value is an address of the form # user@domain, \fB%d\fR is replaced by the domain part of # the attribute value. When the result is unqualified it # is skipped. # .IP "\fB%[SUD1-9]\fR" # The upper-case and decimal digit expansions interpolate # the parts of the input key rather than the result. Their # behavior is identical to that described with \fBquery\fR, # and in fact because the input key is known in advance, queries # whose key does not contain all the information specified in # the result template are suppressed and return no results. # .RE # .IP # For example, using "result_format = smtp:[%s]" allows one # to use a mailHost attribute as the basis of a transport(5) # table. After applying the result format, multiple values # are concatenated as comma separated strings. The expansion_limit # and parameter explained below allows one to restrict the number # of values in the result, which is especially useful for maps that # must return at most one value. # # The default value \fB%s\fR specifies that each result value should # be used as is. # # This parameter is available with Postfix 2.2 and later. # # NOTE: DO NOT put quotes around the result format! # .IP "\fBdomain (default: no domain list)\fR" # This is a list of domain names, paths to files, or # dictionaries. When specified, only fully qualified search # keys with a *non-empty* localpart and a matching domain # are eligible for lookup: 'user' lookups, bare domain lookups # and "@domain" lookups are not performed. This can significantly # reduce the query load on the MySQL server. # .nf # domain = postfix.org, hash:/etc/postfix/searchdomains # .fi # # It is best not to use SQL to store the domains eligible # for SQL lookups. # # This parameter is available with Postfix 2.2 and later. # # NOTE: DO NOT define this parameter for local(8) aliases, # because the input keys are always unqualified. # .IP "\fBexpansion_limit (default: 0)\fR" # A limit on the total number of result elements returned # (as a comma separated list) by a lookup against the map. # A setting of zero disables the limit. Lookups fail with a # temporary error if the limit is exceeded. Setting the # limit to 1 ensures that lookups do not return multiple # values. # .IP "\fBoption_file\fR" # Read options from the given file instead of the default my.cnf # location. # .sp # This parameter is available with Postfix 2.11 and later. # .IP "\fBoption_group\fR" # Read options from the given group. # .sp # Postfix 3.1 and earlier don't read \fB[client]\fR option # group settings unless a non-empty \fBoption_file\fR or # \fBoption_group\fR value are specified. To enable this, # specify, for example, "\fBoption_group = client\fR". # .sp # This parameter is available with Postfix 2.11 and later. # .IP "\fBtls_cert_file\fR" # File containing client's X509 certificate. # .sp # This parameter is available with Postfix 2.11 and later. # .IP "\fBtls_key_file\fR" # File containing the private key corresponding to \fBtls_cert_file\fR. # .sp # This parameter is available with Postfix 2.11 and later. # .IP "\fBtls_CAfile\fR" # File containing certificates for all of the X509 Certification # Authorities the client will recognize. Takes precedence over # \fBtls_CApath\fR. # .sp # This parameter is available with Postfix 2.11 and later. # .IP "\fBtls_CApath\fR" # Directory containing X509 Certification Authority certificates # in separate individual files. # .sp # This parameter is available with Postfix 2.11 and later. # .IP "\fBtls_verify_cert (default: no)\fR" # Verify that the server's name matches the common name in the # certificate. # .sp # This parameter is available with Postfix 2.11 and later. # OBSOLETE QUERY INTERFACE # .ad # .fi # This section describes an interface that is deprecated as # of Postfix 2.2. It is replaced by the more general \fBquery\fR # interface described above. If the \fBquery\fR parameter # is defined, the legacy parameters described here ignored. # Please migrate to the new interface as the legacy interface # may be removed in a future release. # # The following parameters can be used to fill in a # SELECT template statement of the form: # # .nf # SELECT [\fBselect_field\fR] # FROM [\fBtable\fR] # WHERE [\fBwhere_field\fR] = '%s' # [\fBadditional_conditions\fR] # .fi # # The specifier %s is replaced by the search string, and is # escaped so if it contains single quotes or other odd characters, # it will not cause a parse error, or worse, a security problem. # .IP "\fBselect_field\fR" # The SQL "select" parameter. Example: # .nf # \fBselect_field\fR = forw_addr # .fi # .IP "\fBtable\fR" # The SQL "select .. from" table name. Example: # .nf # \fBtable\fR = mxaliases # .fi # .IP "\fBwhere_field\fR # The SQL "select .. where" parameter. Example: # .nf # \fBwhere_field\fR = alias # .fi # .IP "\fBadditional_conditions\fR # Additional conditions to the SQL query. Example: # .nf # \fBadditional_conditions\fR = AND status = 'paid' # .fi # SEE ALSO # postmap(1), Postfix lookup table maintenance # postconf(5), configuration parameters # ldap_table(5), LDAP lookup tables # pgsql_table(5), PostgreSQL lookup tables # sqlite_table(5), SQLite lookup tables # README FILES # .ad # .fi # Use "\fBpostconf readme_directory\fR" or # "\fBpostconf html_directory\fR" to locate this information. # .na # .nf # DATABASE_README, Postfix lookup table overview # MYSQL_README, Postfix MYSQL client guide # LICENSE # .ad # .fi # The Secure Mailer license must be distributed with this software. # HISTORY # MySQL support was introduced with Postfix version 1.0. # AUTHOR(S) # Original implementation by: # Scott Cotton, Joshua Marcus # IC Group, Inc. # # Further enhancements by: # Liviu Daia # Institute of Mathematics of the Romanian Academy # P.O. BOX 1-764 # RO-014700 Bucharest, ROMANIA #--