/*
 * (C) Copyright 2005- ECMWF.
 *
 * This software is licensed under the terms of the Apache Licence Version 2.0
 * which can be obtained at http://www.apache.org/licenses/LICENSE-2.0.
 *
 * In applying this licence, ECMWF does not waive the privileges and immunities granted to it by
 * virtue of its status as an intergovernmental organisation nor does it submit to any jurisdiction.
 */

/*! \file eccodes.h
  \brief The ecCodes C header file

  This is the only file that must be included to use the ecCodes library
  from C.
*/

#ifndef eccodes_H
#define eccodes_H

#include "grib_api.h"

#ifdef __cplusplus
extern "C" {
#endif

#define CODES_VERSION ECCODES_VERSION

/* sections */
#define CODES_SECTION_PRODUCT GRIB_SECTION_PRODUCT
#define CODES_SECTION_GRID    GRIB_SECTION_GRID
#define CODES_SECTION_LOCAL   GRIB_SECTION_LOCAL
#define CODES_SECTION_DATA    GRIB_SECTION_DATA
#define CODES_SECTION_BITMAP  GRIB_SECTION_BITMAP

/* LOG MODES
Log mode for processing information
*/
#define CODES_LOG_INFO    GRIB_LOG_INFO
#define CODES_LOG_WARNING GRIB_LOG_WARNING
#define CODES_LOG_ERROR   GRIB_LOG_ERROR
#define CODES_LOG_FATAL   GRIB_LOG_FATAL
#define CODES_LOG_DEBUG   GRIB_LOG_DEBUG

/* Types */
#define CODES_TYPE_UNDEFINED GRIB_TYPE_UNDEFINED
#define CODES_TYPE_LONG      GRIB_TYPE_LONG
#define CODES_TYPE_DOUBLE    GRIB_TYPE_DOUBLE
#define CODES_TYPE_STRING    GRIB_TYPE_STRING
#define CODES_TYPE_BYTES     GRIB_TYPE_BYTES
#define CODES_TYPE_SECTION   GRIB_TYPE_SECTION
#define CODES_TYPE_LABEL     GRIB_TYPE_LABEL
#define CODES_TYPE_MISSING   GRIB_TYPE_MISSING

/* Missing values */
#define CODES_MISSING_LONG   GRIB_MISSING_LONG
#define CODES_MISSING_DOUBLE GRIB_MISSING_DOUBLE

/* Dump option flags*/
#define CODES_DUMP_FLAG_READ_ONLY      GRIB_DUMP_FLAG_READ_ONLY
#define CODES_DUMP_FLAG_DUMP_OK        GRIB_DUMP_FLAG_DUMP_OK
#define CODES_DUMP_FLAG_VALUES         GRIB_DUMP_FLAG_VALUES
#define CODES_DUMP_FLAG_CODED          GRIB_DUMP_FLAG_CODED
#define CODES_DUMP_FLAG_OCTET          GRIB_DUMP_FLAG_OCTET
#define CODES_DUMP_FLAG_ALIASES        GRIB_DUMP_FLAG_ALIASES
#define CODES_DUMP_FLAG_TYPE           GRIB_DUMP_FLAG_TYPE
#define CODES_DUMP_FLAG_HEXADECIMAL    GRIB_DUMP_FLAG_HEXADECIMAL
#define CODES_DUMP_FLAG_NO_DATA        GRIB_DUMP_FLAG_NO_DATA
#define CODES_DUMP_FLAG_ALL_DATA       GRIB_DUMP_FLAG_ALL_DATA
#define CODES_DUMP_FLAG_ALL_ATTRIBUTES GRIB_DUMP_FLAG_ALL_ATTRIBUTES

/* codes_nearest flags */
#define CODES_NEAREST_SAME_GRID  GRIB_NEAREST_SAME_GRID
#define CODES_NEAREST_SAME_DATA  GRIB_NEAREST_SAME_DATA
#define CODES_NEAREST_SAME_POINT GRIB_NEAREST_SAME_POINT

/* Geoiterator flags */
#define CODES_GEOITERATOR_NO_VALUES GRIB_GEOITERATOR_NO_VALUES

/*! Iteration is carried out on all the keys available in the message
\ingroup keys_iterator
\see codes_keys_iterator_new
*/
#define CODES_KEYS_ITERATOR_ALL_KEYS GRIB_KEYS_ITERATOR_ALL_KEYS

/*! read only keys are skipped by keys iterator.
\ingroup keys_iterator
\see codes_keys_iterator_new
*/
#define CODES_KEYS_ITERATOR_SKIP_READ_ONLY GRIB_KEYS_ITERATOR_SKIP_READ_ONLY

/*! optional keys are skipped by keys iterator.
\ingroup keys_iterator
\see codes_keys_iterator_new */
#define CODES_KEYS_ITERATOR_SKIP_OPTIONAL GRIB_KEYS_ITERATOR_SKIP_OPTIONAL

/*! edition specific keys are skipped by keys iterator.
\ingroup keys_iterator
\see codes_keys_iterator_new */
#define CODES_KEYS_ITERATOR_SKIP_EDITION_SPECIFIC GRIB_KEYS_ITERATOR_SKIP_EDITION_SPECIFIC

/*! coded keys are skipped by keys iterator.
\ingroup keys_iterator
\see codes_keys_iterator_new */
#define CODES_KEYS_ITERATOR_SKIP_CODED GRIB_KEYS_ITERATOR_SKIP_CODED

/*! computed keys are skipped by keys iterator.
\ingroup keys_iterator
\see codes_keys_iterator_new */
#define CODES_KEYS_ITERATOR_SKIP_COMPUTED GRIB_KEYS_ITERATOR_SKIP_COMPUTED

/*! duplicates of a key are skipped by keys iterator.
\ingroup keys_iterator
\see codes_keys_iterator_new */
#define CODES_KEYS_ITERATOR_SKIP_DUPLICATES GRIB_KEYS_ITERATOR_SKIP_DUPLICATES

/*! function keys are skipped by keys iterator.
\ingroup keys_iterator
\see codes_keys_iterator_new */
#define CODES_KEYS_ITERATOR_SKIP_FUNCTION GRIB_KEYS_ITERATOR_SKIP_FUNCTION

/*!  only keys present in the dump
\ingroup keys_iterator
\see codes_keys_iterator_new */
#define CODES_KEYS_ITERATOR_DUMP_ONLY GRIB_KEYS_ITERATOR_DUMP_ONLY

typedef struct grib_values codes_values;
typedef struct grib_key_value_list codes_key_value_list;

/*! Codes handle,   structure giving access to parsed values by keys
    \ingroup codes_handle
    \struct codes_handle
*/
typedef struct grib_handle codes_handle;

/*! GRIB multi-field handle, structure used to build multi-field messages.
    \ingroup codes_handle
    \struct codes_multi_handle
 */
typedef struct grib_multi_handle codes_multi_handle;

/*! Codes context,  structure containing the memory methods, the parsers and the formats.
    \ingroup codes_context
    \struct codes_context
*/
typedef struct grib_context codes_context;

/*! GRIB geoiterator, structure supporting a geographic iteration of values in a GRIB message.
    \ingroup iterators
    \struct codes_iterator
*/
typedef struct grib_iterator codes_iterator;

/*! Codes nearest, structure used to find the nearest points of a latitude longitude point in a GRIB message.
    \ingroup iterators
    \struct codes_nearest
*/
typedef struct grib_nearest codes_nearest;

/*! Codes keys iterator. Iterator over keys.
    \ingroup keys_iterator
    \struct codes_keys_iterator
*/
typedef struct grib_keys_iterator codes_keys_iterator;
typedef struct bufr_keys_iterator codes_bufr_keys_iterator;

typedef struct grib_fieldset codes_fieldset;
typedef struct grib_order_by codes_order_by;
typedef struct grib_where codes_where;
typedef struct grib_sarray codes_sarray;
typedef struct grib_oarray codes_oarray;
typedef struct grib_darray codes_darray;
typedef struct grib_iarray codes_iarray;
typedef struct grib_vdarray codes_vdarray;
typedef struct grib_vsarray codes_vsarray;
typedef struct grib_viarray codes_viarray;
typedef struct grib_string_list codes_string_list;
typedef struct grib_util_packing_spec codes_util_packing_spec;
typedef struct grib_util_grid_spec codes_util_grid_spec;


codes_fieldset* codes_fieldset_new_from_files(codes_context* c, const char* filenames[], int nfiles, const char** keys, int nkeys, const char* where_string, const char* order_by_string, int* err);

void codes_fieldset_delete(codes_fieldset* set);
void codes_fieldset_rewind(codes_fieldset* set);
int codes_fieldset_apply_order_by(codes_fieldset* set, const char* order_by_string);
codes_handle* codes_fieldset_next_handle(codes_fieldset* set, int* err);
int codes_fieldset_count(const codes_fieldset* set);
int codes_values_check(codes_handle* h, codes_values* values, int count);

/*! \defgroup codes_index The indexing feature
The codes_index is the structure giving indexed access to messages in a file.
 */
/*! @{*/

/*! index structure to access messages in a file.
 * \ingroup codes_index
 * \struct codes_index
 */
typedef struct grib_index codes_index;

/**
 *  Create a new index from a file. The file is indexed with the keys in argument.
 *
 * @param c           : context  (NULL for default context)
 * @param filename    : name of the file of messages to be indexed
 * @param keys        : comma separated list of keys for the index.
 *    The type of the key can be explicitly declared appending :l for long,
 *    (or alternatively :i)
 *    :d for double, :s for string to the key name. If the type is not
 *    declared explicitly, the native type is assumed.
 * @param err         :  0 if OK, integer value on error
 * @return            the newly created index
 */
codes_index* codes_index_new_from_file(codes_context* c, const char* filename, const char* keys, int* err);

/**
 *  Create a new index based on a set of keys.
 *
 * @param c           : context  (NULL for default context)
 * @param keys        : comma separated list of keys for the index.
 *    The type of the key can be explicitly declared appending :l for long,
 *    (or alternatively :i)
 *    :d for double, :s for string to the key name. If the type is not
 *    declared explicitly, the native type is assumed.
 * @param err         :  0 if OK, integer value on error
 * @return            the newly created index
 */
codes_index* codes_index_new(codes_context* c, const char* keys, int* err);

/**
 *  Indexes the file given in argument in the index given in argument.
 *
 * @param index       : index
 * @param filename    : name of the file of messages to be indexed
 * @return            0 if OK, integer value on error
 */
int codes_index_add_file(codes_index* index, const char* filename);
int codes_index_write(codes_index* index, const char* filename);
codes_index* codes_index_read(codes_context* c, const char* filename, int* err);

/**
 *  Get the number of distinct values of the key in argument contained in the index. The key must belong to the index.
 *
 * @param index       : an index created from a file.
 *                      The index must have been created with the key in argument.
 * @param key         : key for which the number of values is computed
 * @param size        : number of distinct values of the key in the index
 * @return            0 if OK, integer value on error
 */
int codes_index_get_size(const codes_index* index, const char* key, size_t* size);

/**
 *  Get the distinct values of the key in argument contained in the index. The key must belong to the index. This function is used when the type of the key was explicitly defined as long or when the native type of the key is long.
 *
 * @param index       : an index created from a file.
 *                      The index must have been created with the key in argument.
 * @param key         : key for which the values are returned
 * @param values      : array of values. The array must be allocated before entering this function and its size must be enough to contain all the values.
 * @param size        : size of the values array
 * @return            0 if OK, integer value on error
 */
int codes_index_get_long(const codes_index* index, const char* key, long* values, size_t* size);

/**
 *  Get the distinct values of the key in argument contained in the index. The key must belong to the index. This function is used when the type of the key was explicitly defined as double or when the native type of the key is double.
 *
 * @param index       : an index created from a file.
 *                      The index must have been created with the key in argument.
 * @param key         : key for which the values are returned
 * @param values      : array of values. The array must be allocated before entering this function and its size must be enough to contain all the values.
 * @param size        : size of the values array
 * @return            0 if OK, integer value on error
 */
int codes_index_get_double(const codes_index* index, const char* key, double* values, size_t* size);

/**
 *  Get the distinct values of the key in argument contained in the index. The key must belong to the index. This function is used when the type of the key was explicitly defined as string or when the native type of the key is string.
 *
 * @param index       : an index created from a file.
 *                      The index must have been created with the key in argument.
 * @param key         : key for which the values are returned
 * @param values      : array of values. The array must be allocated before entering this function and its size must be enough to contain all the values.
 * @param size        : size of the values array
 * @return            0 if OK, integer value on error
 */
int codes_index_get_string(const codes_index* index, const char* key, char** values, size_t* size);


/**
 *  Select the message subset with key==value. The value is a long. The key must have been created with long type or have long as native type if the type was not explicitly defined in the index creation.
 *
 * @param index       : an index created from a file.
 *                      The index must have been created with the key in argument.
 * @param key         : key to be selected
 * @param value       : value of the key to select
 * @return            0 if OK, integer value on error
 */
int codes_index_select_long(codes_index* index, const char* key, long value);

/**
 *  Select the message subset with key==value. The value is a double. The key must have been created with double type or have double as native type if the type was not explicitly defined in the index creation.
 *
 * @param index       : an index created from a file.
 *     The index must have been created with the key in argument.
 * @param key         : key to be selected
 * @param value       : value of the key to select
 * @return            0 if OK, integer value on error
 */
int codes_index_select_double(codes_index* index, const char* key, double value);

/**
 * Select the message subset with key==value. The value is a string. The key must have been created with string type or have string as native type if the type was not explicitly defined in the index creation.
 *
 * @param index       : an index created from a file.
 *                      The index must have been created with the key in argument.
 * @param key         : key to be selected
 * @param value       : value of the key to select
 * @return            0 if OK, integer value on error
 */
int codes_index_select_string(codes_index* index, const char* key, const char* value);

/**
 * Create a new handle from an index after having selected the key values.
 * All the keys belonging to the index must be selected before calling this function. Successive calls to this function will return all the handles compatible with the constraints defined selecting the values of the index keys.
 * When no more handles are available from the index a NULL pointer is returned and the err variable is set to CODES_END_OF_INDEX.
 *
 * @param index       : an index created from a file.
 * @param err         : 0 if OK, integer value on error. CODES_END_OF_INDEX when no more handles are contained in the index.
 * @return            message handle.
 */
codes_handle* codes_handle_new_from_index(codes_index* index, int* err);

/**
 *  Delete the index.
 *
 * @param index       : index to be deleted.
 */
void codes_index_delete(codes_index* index);

/*! @} */

/*! \defgroup codes_handle The message handle
The codes_handle is the structure giving access to parsed message values by keys.
*/
/*! @{*/
/**
 *  Counts the messages contained in a file resource.
 *
 * @param c           : the context from which the handle will be created (NULL for default context)
 * @param f           : the file resource
 * @param n           : the number of messages in the file
 * @return            0 if OK, integer value on error
 */
int codes_count_in_file(codes_context* c, FILE* f, int* n);

/**
 *  Counts the messages contained in a file.
 *
 * @param c           : the context from which the handle will be created (NULL for default context)
 * @param filename    : the path to the file
 * @param n           : the number of messages in the file
 * @return            0 if OK, integer value on error
 */
int codes_count_in_filename(codes_context* c, const char* filename, int* n);

/**
 *  Create a handle from a file resource.
 *  The file is read until a message is found. The message is then copied.
 *  Remember always to delete the handle when it is not needed anymore to avoid
 *  memory leaks.
 *
 * @param c           : the context from which the handle will be created (NULL for default context)
 * @param f           : the file resource
 * @param product     : the kind of product e.g. PRODUCT_GRIB, PRODUCT_BUFR
 * @param error       : error code set if the returned handle is NULL and the end of file is not reached
 * @return            the new handle, NULL if the resource is invalid or a problem is encountered
 */
codes_handle* codes_handle_new_from_file(codes_context* c, FILE* f, ProductKind product, int* error);

/**
 *  Create a GRIB handle from a file resource.
 *  The file is read until a GRIB message is found. The message is then copied.
 *  Remember always to delete the handle when it is not needed anymore to avoid
 *  memory leaks.
 *
 * @param c           : the context from which the handle will be created (NULL for default context)
 * @param f           : the file resource
 * @param error       : error code set if the returned handle is NULL and the end of file is not reached
 * @return            the new handle, NULL if the resource is invalid or a problem is encountered
 */
codes_handle* codes_grib_handle_new_from_file(codes_context* c, FILE* f, int* error);

/**
 *  Create a BUFR handle from a file resource.
 *  The file is read until a BUFR message is found. The message is then copied.
 *  Remember always to delete the handle when it is not needed anymore to avoid
 *  memory leaks.
 *
 * @param c           : the context from which the handle will be created (NULL for default context)
 * @param f           : the file resource
 * @param error       : error code set if the returned handle is NULL and the end of file is not reached
 * @return            the new handle, NULL if the resource is invalid or a problem is encountered
 */
codes_handle* codes_bufr_handle_new_from_file(codes_context* c, FILE* f, int* error);


/**
 *  Write a coded message to a file.
 *
 * @param h           : codes_handle to be written
 * @param file        : name of the output file
 * @param mode        : mode
 * @return            0 if OK, integer value on error
 */
int codes_write_message(const codes_handle* h, const char* file, const char* mode);

/* The 'what' argument can be a bitwise OR of GRIB_SECTION_GRID, GRIB_SECTION_PRODUCT... etc */
codes_handle* codes_grib_util_sections_copy(codes_handle* hfrom, codes_handle* hto, int what, int* err);

/**
 *  Create a handle from a user message in memory. The message will not be freed at the end.
 *  The message will be copied as soon as a modification is needed.
 *
 * @param c           : the context from which the handle will be created (NULL for default context)
 * @param data        : the actual message
 * @param data_len    : the length of the message in number of bytes
 * @return            the new handle, NULL if the message is invalid or a problem is encountered
 */
codes_handle* codes_handle_new_from_message(codes_context* c, const void* data, size_t data_len);

/**
 *  Create a handle from a user message in memory. The message will not be freed at the end.
 *  The message will be copied as soon as a modification is needed.
 *  This function also works with GRIB multi-field messages.
 *
 * @param c           : the context from which the handle will be created (NULL for default context)
 * @param data        : the actual message
 * @param data_len    : the length of the message in number of bytes
 * @param error       : error code
 * @return            the new handle, NULL if the message is invalid or a problem is encountered
 */
codes_handle* codes_grib_handle_new_from_multi_message(codes_context* c, void** data,
                                                       size_t* data_len, int* error);

/**
 *  Create a handle from a user message. The message is copied and will be freed with the handle
 *
 * @param c           : the context from which the handle will be created (NULL for default context)
 * @param data        : the actual message
 * @param data_len    : the length of the message in number of bytes
 * @return            the new handle, NULL if the message is invalid or a problem is encountered
 */
codes_handle* codes_handle_new_from_message_copy(codes_context* c, const void* data, size_t data_len);


/**
 *  Create a handle from a GRIB message contained in the samples directory.
 *  The message is copied at the creation of the handle
 *
 * @param c           : the context from which the handle will be created (NULL for default context)
 * @param sample_name : the name of the GRIB sample file
 * @return            the new handle, NULL if the resource is invalid or a problem is encountered
 */
codes_handle* codes_grib_handle_new_from_samples(codes_context* c, const char* sample_name);

/**
 *  Create a handle from a BUFR message contained in a samples directory.
 *  The message is copied at the creation of the handle
 *
 * @param c           : the context from which the handle will be created (NULL for default context)
 * @param sample_name : the name of the BUFR sample file
 * @return            the new handle, NULL if the resource is invalid or a problem is encountered
 */
codes_handle* codes_bufr_handle_new_from_samples(codes_context* c, const char* sample_name);

/**
 *  Create a handle from a file contained in a samples directory.
 *  The samples file can be GRIB, BUFR etc. Its type will be determined at runtime.
 *  The message is copied at the creation of the handle
 *
 * @param c           : the context from which the handle will be created (NULL for default context)
 * @param sample_name : the name of the sample file
 * @return            the new handle, NULL if the resource is invalid or a problem is encountered
 */
codes_handle* codes_handle_new_from_samples(codes_context* c, const char* sample_name);


/**
 *  Clone an existing handle using the context of the original handle,
 *  The message is copied and reparsed
 *
 * @param h           : The handle to be cloned
 * @return            the new handle, NULL if the message is invalid or a problem is encountered
 */
codes_handle* codes_handle_clone(const codes_handle* h);
codes_handle* codes_handle_clone_headers_only(const codes_handle* h);

/**
 *  Frees a handle, also frees the message if it is not a user message
 *  @see  codes_handle_new_from_message
 * @param h           : The handle to be deleted
 * @return            0 if OK, integer value on error
 */
int codes_handle_delete(codes_handle* h);

/**
 *  Create an empty multi-field GRIB handle.
 *  This is only applicable to GRIB edition 2.
 *  Remember always to delete the multi-handle when it is not needed anymore to avoid
 *  memory leaks.
 *
 * @param c           : the context from which the handle will be created (NULL for default context)
 */
codes_multi_handle* codes_grib_multi_handle_new(codes_context* c);

/**
 *  Append the sections starting with start_section of the message pointed by h at
 *  the end of the multi-field GRIB handle mh.
 *  This is only applicable to GRIB edition 2.
 *  Remember always to delete the multi-handle when it is not needed anymore to avoid
 *  memory leaks.
 *
 * @param h           : The handle from which the sections are copied.
 * @param start_section : Section number. Starting from this section all the sections to the end of the message will be copied.
 * @param mh          : The multi-field handle on which the sections are appended.
 * @return            0 if OK, integer value on error
 */
int codes_grib_multi_handle_append(codes_handle* h, int start_section, codes_multi_handle* mh);

/**
 * Delete multi-field GRIB handle.
 * This is only applicable to GRIB edition 2.
 *
 * @param mh          : The multi-field handle to be deleted.
 * @return            0 if OK, integer value on error
 */
int codes_grib_multi_handle_delete(codes_multi_handle* mh);

/**
 *  Write a multi-field GRIB handle in a file.
 *  This is only applicable to GRIB edition 2.
 *  Remember always to delete the multi-handle when it is not needed anymore to avoid
 *  memory leaks.
 *
 * @param mh          : The multi-field GRIB handle to be written.
 * @param f            : File on which the file handle is written.
 * @return            0 if OK, integer value on error
 */
int codes_grib_multi_handle_write(codes_multi_handle* mh, FILE* f);

/*! @} */

/*! \defgroup handling_coded_messages Handling coded messages */
/*! @{ */
/**
 * getting the message attached to a handle
 *
 * @param h              : the handle to which the buffer should be gathered
 * @param message        : the pointer to be set to the handle's data
 * @param message_length : On exit, the message size in number of bytes
 * @return            0 if OK, integer value on error
 */
int codes_get_message(const codes_handle* h, const void** message, size_t* message_length);


/**
 * getting a copy of the message attached to a handle
 *
 * @param h              : the handle to which the buffer should be returned
 * @param message        : the pointer to the data buffer to be filled
 * @param message_length : On entry, the size in number of bytes of the allocated empty message.
 *                         On exit, the actual message length in number of bytes
 * @return            0 if OK, integer value on error
 */
int codes_get_message_copy(const codes_handle* h, void* message, size_t* message_length);
/*! @} */

/*! \defgroup iterators Iterating on latitude/longitude/values */
/*! @{ */

/*!
 * \brief Create a new geoiterator from a GRIB handle, using current geometry and values.
 *
 * \param h           : the handle from which the geoiterator will be created
 * \param flags       : flags for future use.
 * \param error       : error code
 * \return            the new geoiterator, NULL if no geoiterator can be created
 */
codes_iterator* codes_grib_iterator_new(const codes_handle* h, unsigned long flags, int* error);

/**
 * Get latitude/longitude and data values for a GRIB message.
 * The latitudes, longitudes and values arrays must be properly allocated by the caller.
 * Their required dimension can be obtained by getting the value of the integer key "numberOfPoints".
 *
 * @param h           : handle from which geography and data values are taken
 * @param lats        : returned array of latitudes
 * @param lons        : returned array of longitudes
 * @param values      : returned array of data values
 * @return            0 if OK, integer value on error
 */
int codes_grib_get_data(const codes_handle* h, double* lats, double* lons, double* values);

/**
 * Get the next value from a geoiterator.
 *
 * @param i           : the geoiterator
 * @param lat         : output latitude in degrees
 * @param lon         : output longitude in degrees
 * @param value       : output value of the point
 * @return            positive value if successful, 0 if no more data are available
 */
int codes_grib_iterator_next(codes_iterator* i, double* lat, double* lon, double* value);

/**
 * Get the previous value from a geoiterator.
 *
 * @param i           : the geoiterator
 * @param lat         : output latitude in degrees
 * @param lon         : output longitude in degrees
 * @param value       : output value of the point*
 * @return            positive value if successful, 0 if no more data are available
 */
int codes_grib_iterator_previous(codes_iterator* i, double* lat, double* lon, double* value);

/**
 * Test procedure for values in a geoiterator.
 *
 * @param i           : the geoiterator
 * @return            boolean, 1 if the iterator still has next values, 0 otherwise
 */
int codes_grib_iterator_has_next(codes_iterator* i);

/**
 * Test procedure for values in a geoiterator.
 *
 * @param i           : the geoiterator
 * @return            0 if OK, integer value on error
 */
int codes_grib_iterator_reset(codes_iterator* i);

/**
 *  Frees the geoiterator from memory.
 *
 * @param i           : the geoiterator
 * @return            0 if OK, integer value on error
 */
int codes_grib_iterator_delete(codes_iterator* i);

/*!
 * \brief Create a new nearest neighbour object from a handle, using current geometry.
 *
 * \param h           : the handle from which the nearest object will be created
 * \param error       : error code
 * \return            the new nearest, NULL if no nearest can be created
 */
codes_nearest* codes_grib_nearest_new(const codes_handle* h, int* error);

/**
 * Find the 4 nearest points of a latitude longitude point.
 * The flags are provided to speed up the process of searching. If you are
 * sure that the point you are asking for is not changing from a call
 * to another you can use CODES_NEAREST_SAME_POINT. The same is valid for
 * the grid. Flags can be used together doing a bitwise OR.
 * The distances are given in kilometres.
 *
 * @param nearest     : nearest structure
 * @param h           : handle from which geography and data values are taken
 * @param inlat       : latitude of the point to search for
 * @param inlon       : longitude of the point to search for
 * @param flags       : CODES_NEAREST_SAME_POINT, CODES_NEAREST_SAME_GRID
 * @param outlats     : returned array of latitudes of the nearest points
 * @param outlons     : returned array of longitudes of the nearest points
 * @param values      : returned array of data values of the nearest points
 * @param distances   : returned array of distances from the nearest points
 * @param indexes     : returned array of indexes of the nearest points
 * @param len         : size of the arrays
 * @return            0 if OK, integer value on error
 */
int codes_grib_nearest_find(codes_nearest* nearest, const codes_handle* h, double inlat, double inlon,
                            unsigned long flags, double* outlats, double* outlons,
                            double* values, double* distances, int* indexes, size_t* len);

/**
 *  Frees a nearest object from memory
 *
 * @param nearest           : the nearest neighbour object
 * @return            0 if OK, integer value on error
 */
int codes_grib_nearest_delete(codes_nearest* nearest);

/**
 * Find the nearest point of a set of points whose latitudes and longitudes
 * are given in the inlats, inlons arrays respectively.
 * If the flag is_lsm is 1 the nearest land point is returned and the
 * GRIB passed as handle (h) is considered a land sea mask.
 * The land nearest point is the nearest point with land sea mask value>=0.5.
 * If no nearest land points are found the nearest value is returned.
 * If the flag is_lsm is 0 the nearest point is returned.
 * values, distances, indexes (in the "values" array) for the nearest points (ilons,ilats)
 * are returned.
 * The distances are given in kilometres.
 *
 * @param h           : handle from which geography and data values are taken
 * @param is_lsm      : lsm flag (1-> nearest land, 0-> nearest)
 * @param inlats      : latitudes of the points to search for
 * @param inlons      : longitudes of the points to search for
 * @param npoints     : number of points (size of the inlats,inlons,outlats,outlons,values,distances,indexes arrays)
 * @param outlats     : returned array of latitudes of the nearest points
 * @param outlons     : returned array of longitudes of the nearest points
 * @param values      : returned array of data values of the nearest points
 * @param distances   : returned array of distances from the nearest points
 * @param indexes     : returned array of indexes of the nearest points
 * @return            0 if OK, integer value on error
 */
int codes_grib_nearest_find_multiple(const codes_handle* h, int is_lsm,
                                     const double* inlats, const double* inlons, long npoints,
                                     double* outlats, double* outlons,
                                     double* values, double* distances, int* indexes);

/* @} */

/*! \defgroup get_set Accessing header and data values   */
/*! @{ */
/**
 *  Get the byte offset of a key, if several keys of the same name
 *  are present, the offset of the last one is returned
 *
 * @param h           : the handle to get the offset from
 * @param key         : the key to be searched
 * @param offset      : the address of a size_t where the offset will be set
 * @return            0 if OK, integer value on error
 */
int codes_get_offset(const codes_handle* h, const char* key, size_t* offset);

/**
 *  Get the number of coded value from a key, if several keys of the same name are present, the total sum is returned
 *
 * @param h           : the handle to get the data from
 * @param key         : the key to be searched
 * @param size        : the address of a size_t where the size will be set
 * @return            0 if OK, integer value on error
 */
int codes_get_size(const codes_handle* h, const char* key, size_t* size);

/**
 *  Get the length of the string representation of the key, if several keys of the same name are present, the maximum length is returned
 *
 * @param h           : the handle to get the data from
 * @param key         : the key to be searched
 * @param length        : the address of a size_t where the length will be set
 * @return            0 if OK, integer value on error
 */
int codes_get_length(const codes_handle* h, const char* key, size_t* length);

/**
 *  Get a long value from a key, if several keys of the same name are present, the last one is returned
 *  @see  codes_set_long
 *
 * @param h           : the handle to get the data from
 * @param key         : the key to be searched
 * @param value       : the address of a long where the data will be retrieved
 * @return            0 if OK, integer value on error
 */
int codes_get_long(const codes_handle* h, const char* key, long* value);

/**
 *  Get a double value from a key, if several keys of the same name are present, the last one is returned
 *  @see  codes_set_double
 *
 * @param h           : the handle to get the data from
 * @param key         : the key to be searched
 * @param value       : the address of a double where the data will be retrieved
 * @return            0 if OK, integer value on error
 */
int codes_get_double(const codes_handle* h, const char* key, double* value);
int codes_get_float(const codes_handle* h, const char* key, float* value);

/**
 *  Get as double the i-th element of the "key" array
 *
 * @param h           : the handle to get the data from
 * @param key         : the key to be searched
 * @param i           : zero-based index
 * @param value       : the address of a double where the data will be retrieved
 * @return            0 if OK, integer value on error
 */
int codes_get_double_element(const codes_handle* h, const char* key, int i, double* value);
int codes_get_float_element(const codes_handle* h, const char* key, int i, float* value);

/**
 *  Get as double array the elements of the "key" array whose indexes are listed in the input array "index_array"
 *
 * @param h           : the handle to get the data from
 * @param key         : the key to be searched
 * @param index_array : zero-based array of indexes
 * @param size        : size of the index_array and value arrays
 * @param value       : the double array for the data values
 * @return            0 if OK, integer value on error
 */
int codes_get_double_elements(const codes_handle* h, const char* key, const int* index_array, long size, double* value);
int codes_get_float_elements(const codes_handle* h, const char* key, const int* index_array, long size, float* value);

/**
 *  Get a string value from a key, if several keys of the same name are present, the last one is returned
 * @see  codes_set_string
 *
 * @param h         : the handle to get the data from
 * @param key       : the key to be searched
 * @param value     : the address of a string where the data will be retrieved
 * @param length    : the address of a size_t that contains allocated length of the string on input,
 *                    and that contains the actual length of the string on output
 * @return          0 if OK, integer value on error
 */
int codes_get_string(const codes_handle* h, const char* key, char* value, size_t* length);

/**
 *  Get string array values from a key. If several keys of the same name are present, the last one is returned
 * @see  codes_set_string_array
 *
 * @param h       : the handle to get the data from
 * @param key     : the key to be searched
 * @param vals    : the address of a string array where the data will be retrieved
 * @param length  : the address of a size_t that contains allocated length of the array on input,
 *                  and that contains the actual length of the array on output
 * @return        0 if OK, integer value on error
 */
int codes_get_string_array(const codes_handle* h, const char* key, char** vals, size_t* length);

/**
 *  Get raw bytes values from a key. If several keys of the same name are present, the last one is returned
 * @see  codes_set_bytes
 *
 * @param h         : the handle to get the data from
 * @param key       : the key to be searched
 * @param bytes     : the address of a byte array where the data will be retrieved
 * @param length    : the address of a size_t that contains allocated length of the byte array on input,
 *                    and that contains the actual length of the byte array on output
 * @return          0 if OK, integer value on error
 */
int codes_get_bytes(const codes_handle* h, const char* key, unsigned char* bytes, size_t* length);

/**
 *  Get double array values from a key. If several keys of the same name are present, the last one is returned
 * @see  codes_set_double_array
 *
 * @param h        : the handle to get the data from
 * @param key      : the key to be searched
 * @param vals     : the address of a double array where the data will be retrieved
 * @param length   : the address of a size_t that contains allocated length of the double array on input,
 *                   and that contains the actual length of the double array on output
 * @return         0 if OK, integer value on error
 */
int codes_get_double_array(const codes_handle* h, const char* key, double* vals, size_t* length);
int codes_get_float_array(const codes_handle* h, const char* key, float* vals, size_t* length);

/**
 *  Get long array values from a key. If several keys of the same name are present, the last one is returned
 * @see  codes_set_long_array
 *
 * @param h           : the handle to get the data from
 * @param key         : the key to be searched
 * @param vals        : the address of a long array where the data will be retrieved
 * @param length      : the address of a size_t that contains allocated length of the long array on input,
 *                      and that contains the actual length of the long array on output
 * @return            0 if OK, integer value on error
 */
int codes_get_long_array(const codes_handle* h, const char* key, long* vals, size_t* length);


/*   setting data         */
/**
 *  Copy the keys belonging to a given namespace from a source handle to a destination handle
 *
 *
 * @param dest      : destination handle
 * @param name      : namespace
 * @param src       : source handle
 * @return          0 if OK, integer value on error
 */
int codes_copy_namespace(codes_handle* dest, const char* name, codes_handle* src);

/**
 *  Set a long value from a key. If several keys of the same name are present, the last one is set
 *  @see  codes_get_long
 *
 * @param h           : the handle to set the data to
 * @param key         : the key to be searched
 * @param val         : a long where the data will be read
 * @return            0 if OK, integer value on error
 */
int codes_set_long(codes_handle* h, const char* key, long val);

/**
 *  Set a double value from a key. If several keys of the same name are present, the last one is set
 *  @see  codes_get_double
 *
 * @param h         : the handle to set the data to
 * @param key       : the key to be searched
 * @param val       : a double where the data will be read
 * @return          0 if OK, integer value on error
 */
int codes_set_double(codes_handle* h, const char* key, double val);

/**
 *  Set a string value from a key. If several keys of the same name are present, the last one is set
 *  @see  codes_get_string
 *
 * @param h          : the handle to set the data to
 * @param key        : the key to be searched
 * @param value      : the address of a string where the data will be read
 * @param length     : the address of a size_t that contains the length of the string on input,
 *                     and that contains the actual packed length of the string on output
 * @return           0 if OK, integer value on error
 */
int codes_set_string(codes_handle* h, const char* key, const char* value, size_t* length);

/**
 *  Set a bytes array from a key. If several keys of the same name are present, the last one is set
 *  @see  codes_get_bytes
 *
 * @param h           : the handle to set the data to
 * @param key         : the key to be searched
 * @param bytes       : the address of a byte array where the data will be read
 * @param length      : the address of a size_t that contains the length of the byte array on input,
 *                      and that contains the actual packed length of the byte array  on output
 * @return            0 if OK, integer value on error
 */
int codes_set_bytes(codes_handle* h, const char* key, const unsigned char* bytes, size_t* length);

/**
 *  Set a double array from a key. If several keys of the same name are present, the last one is set
 *   @see  codes_get_double_array
 *
 * @param h           : the handle to set the data to
 * @param key         : the key to be searched
 * @param vals        : the address of a double array where the data will be read
 * @param length      : a size_t that contains the length of the byte array on input
 * @return            0 if OK, integer value on error
 */
int codes_set_double_array(codes_handle* h, const char* key, const double* vals, size_t length);
int codes_set_float_array(codes_handle* h, const char* key, const float* vals, size_t length);

/**
 * Same as codes_set_double_array but allows setting of READ-ONLY keys like codedValues.
 * Use with great caution!!
 */
int codes_set_force_double_array(codes_handle* h, const char* key, const double* vals, size_t length);
int codes_set_force_float_array(codes_handle* h, const char* key, const float* vals, size_t length);


/**
 *  Set a long array from a key. If several keys of the same name are present, the last one is set
 *  @see  codes_get_long_array
 *
 * @param h           : the handle to set the data to
 * @param key         : the key to be searched
 * @param vals        : the address of a long array where the data will be read
 * @param length      : a size_t that contains the length of the long array on input
 * @return            0 if OK, integer value on error
 */
int codes_set_long_array(codes_handle* h, const char* key, const long* vals, size_t length);

/**
 *  Set a string array from a key. If several keys of the same name are present, the last one is set
 *  @see  codes_get_long_array
 *
 * @param h           : the handle to set the data to
 * @param key         : the key to be searched
 * @param vals        : the address of a string array where the data will be read
 * @param length      : a size_t that contains the length of the array on input
 * @return            0 if OK, integer value on error
 */
int codes_set_string_array(codes_handle* h, const char* key, const char** vals, size_t length);
/*! @} */


/**
 *  Print all keys, with the context print procedure and dump mode to a resource
 *
 * @param h            : the handle to be printed
 * @param out          : output file handle
 * @param mode         : Examples of available dump modes: debug wmo
 * @param option_flags : all the CODES_DUMP_FLAG_x flags can be used
 * @param arg          : used to provide a format to output data (experimental)
 */
void codes_dump_content(const codes_handle* h, FILE* out, const char* mode, unsigned long option_flags, void* arg);

/**
 *  Print all keys from the parsed definition files available in a context
 *
 * @param f           : the File used to print the keys on
 * @param c           : the context that contains the cached definition files to be printed
 */
void codes_dump_action_tree(codes_context* c, FILE* f);

/*! \defgroup context The context object
 The context is a long life configuration object of eccodes.
 It is used to define special allocation and free routines or
 to set special eccodes behaviours and variables.
 */
/*! @{ */

/**
 * ecCodes free procedure, format of a procedure referenced in the context that is used to free memory
 *
 * @param c     : the context where the memory freeing will apply
 * @param data  : pointer to the data to be freed
 * must match @see codes_malloc_proc
 */
typedef void (*codes_free_proc)(const codes_context* c, void* data);

/**
 * ecCodes malloc procedure, format of a procedure referenced in the context that is used to allocate memory
 * @param c             : the context where the memory allocation will apply
 * @param length        : length to be allocated in number of bytes
 * @return              a pointer to the allocated memory, NULL if no memory can be allocated
 * must match @see codes_free_proc
 */
typedef void* (*codes_malloc_proc)(const codes_context* c, size_t length);

/**
 * ecCodes realloc procedure, format of a procedure referenced in the context that is used to reallocate memory
 * @param c             : the context where the memory allocation will apply
 * @param data          : pointer to the data to be reallocated
 * @param length        : length to be allocated in number of bytes
 * @return              a pointer to the allocated memory
 */
typedef void* (*codes_realloc_proc)(const codes_context* c, void* data, size_t length);

/**
 * ecCodes log procedure, format of a procedure referenced in the context that is used to log internal messages
 *
 * @param c             : the context where the logging will apply
 * @param level         : the log level, as defined in log modes
 * @param mesg          : the message to be logged
 */
typedef void (*codes_log_proc)(const codes_context* c, int level, const char* mesg);

/**
 * ecCodes print procedure, format of a procedure referenced in the context that is used to print external messages
 *
 * @param c             : the context where the logging will apply
 * @param descriptor    : the structure to be printed on, must match the implementation
 * @param mesg          : the message to be printed
 */
typedef void (*codes_print_proc)(const codes_context* c, void* descriptor, const char* mesg);

/**
 * ecCodes data read procedure, format of a procedure referenced in the context that is used to read from a stream in a resource
 *
 * @param c            : the context where the read will apply
 * @param ptr          : the resource
 * @param size         : size to read
 * @param stream       : the stream
 * @return              size read
 */
typedef size_t (*codes_data_read_proc)(const codes_context* c, void* ptr, size_t size, void* stream);

/**
 * ecCodes data write procedure, format of a procedure referenced in the context that is used to write to a stream from a resource
 *
 * @param c            : the context where the write will apply
 * @param ptr          : the resource
 * @param size         : size to read
 * @param stream       : the stream
 * @return              size written
 */
typedef size_t (*codes_data_write_proc)(const codes_context* c, const void* ptr, size_t size, void* stream);

/**
 * ecCodes data tell procedure, format of a procedure referenced in the context that is used to tell the current position in a stream
 *
 * @param c           : the context where the tell will apply
 * @param stream      : the stream
 * @return            the position in the stream
 */
typedef off_t (*codes_data_tell_proc)(const codes_context* c, void* stream);

/**
* ecCodes data seek procedure, format of a procedure referenced in the context that is used to seek the current position in a stream
*
* @param c         : the context where the tell will apply
* @param offset    : the offset to seek to
* @param whence    : If whence is set to SEEK_SET, SEEK_CUR, or SEEK_END,
                     the offset is relative to the start of the file, the current position indicator, or end-of-file, respectively.
* @param stream    : the stream
* @return          0 if OK, integer value on error
*/
typedef off_t (*codes_data_seek_proc)(const codes_context* c, off_t offset, int whence, void* stream);

/**
 * ecCodes data eof procedure, format of a procedure referenced in the context that is used to test end of file
 *
 * @param c        : the context where the tell will apply
 * @param stream   : the stream
 * @return         the position in the stream
 */
typedef int (*codes_data_eof_proc)(const codes_context* c, void* stream);

/**
 *  Get the static default context
 *
 * @return         the default context, NULL if the context is not available
 */
codes_context* codes_context_get_default(void);

/**
 *  Frees the cached definition files of the context
 *
 * @param c           : the context to be deleted
 */
void codes_context_delete(codes_context* c);

/**
 *  Set the GTS header mode on.
 *  The GTS headers will be preserved.
 *
 * @param c           : the context
 */
void codes_gts_header_on(codes_context* c);

/**
 *  Set the GTS header mode off.
 *  The GTS headers will be deleted.
 *
 * @param c           : the context
 */
void codes_gts_header_off(codes_context* c);

/**
 *  Set the GRIBEX mode on.
 *  GRIB files will be compatible with GRIBEX.
 *
 * @param c           : the context
 */
void codes_gribex_mode_on(codes_context* c);

/**
 *  Get the GRIBEX mode.
 *
 * @param c           : the context
 */
int codes_get_gribex_mode(const codes_context* c);

/**
 *  Set the GRIBEX mode off.
 *  GRIB files won't be always compatible with GRIBEX.
 *
 * @param c           : the context
 */
void codes_gribex_mode_off(codes_context* c);


void codes_bufr_multi_element_constant_arrays_on(codes_context* c);
void codes_bufr_multi_element_constant_arrays_off(codes_context* c);
/*int  codes_get_bufr_multi_element_constant_arrays(codes_context* c);*/

/**
 * Sets the search path for definition files.
 *
 * @param c      : the context to be modified
 * @param path   : the search path for definition files
 */
void codes_context_set_definitions_path(codes_context* c, const char* path);

/**
 * Sets the search path for sample files.
 *
 * @param c      : the context to be modified
 * @param path   : the search path for sample files
 */
void codes_context_set_samples_path(codes_context* c, const char* path);

void codes_context_set_debug(codes_context* c, int mode);
void codes_context_set_data_quality_checks(codes_context* c, int val);

/**
 *  Sets the context printing procedure used for user interaction
 *
 * @param c        : the context to be modified
 * @param p_print  : the printing procedure to be set @see codes_print_proc
 */
void codes_context_set_print_proc(codes_context* c, codes_print_proc p_print);

/**
 *  Sets the context logging procedure used for system (warning, errors, infos ...) messages
 *
 * @param c       : the context to be modified
 * @param p_log   : the logging procedure to be set @see codes_log_proc
 */
void codes_context_set_logging_proc(codes_context* c, codes_log_proc p_log);
void codes_context_set_logging_file(codes_context* c, FILE*);

/**
 *  Turn on support for multi-fields in single GRIB messages
 *
 * @param c            : the context to be modified
 */
void codes_grib_multi_support_on(codes_context* c);

/**
 *  Turn off support for multi-fields in single GRIB messages
 *
 * @param c            : the context to be modified
 */
void codes_grib_multi_support_off(codes_context* c);

/**
 *  Reset file handle in GRIB multi-field support mode
 *
 * @param c            : the context to be modified
 * @param f            : the file pointer
 */
void codes_grib_multi_support_reset_file(codes_context* c, FILE* f);

char* codes_samples_path(const codes_context* c);
char* codes_definition_path(const codes_context* c);
/*! @} */

/**
 *  Get the API version
 *
 *  @return API version
 */
long codes_get_api_version(void);

/**
 *  Get the Git version control SHA1 identifier
 *
 *  @return character string with SHA1 identifier
 */
const char* codes_get_git_sha1(void);

const char* codes_get_git_branch(void);
const char* codes_get_build_date(void);

/**
 *  Get the package name
 *
 *  @return character string with package name
 */
const char* codes_get_package_name(void);

/**
 *  Prints the API version
 *
 */
void codes_print_api_version(FILE* out);

/*! \defgroup keys_iterator Iterating on keys names
The keys iterator is designed to get the key names defined in a message.
Key names on which the iteration is carried out can be filtered through their
attributes or by the namespace they belong to.
*/
/*! @{ */
/*! Create a new iterator from a valid and initialised handle.
 *  @param h             : the handle whose keys you want to iterate
 *  @param filter_flags  : flags to filter out some of the keys through their attributes
 *  @param name_space    : if not null the iteration is carried out only on
 *                         keys belonging to the namespace passed. (NULL for all the keys)
 *  @return              keys iterator ready to iterate through keys according to filter_flags
 *                       and namespace
 */
codes_keys_iterator* codes_keys_iterator_new(codes_handle* h, unsigned long filter_flags, const char* name_space);

/* codes_bufr_copy_data copies all the values in the data section that are present in the same position in the data tree
 * and with the same number of values to the output handle. Should not exit with error if the output handle has a different
 * structure as the aim is to copy what is possible to be copied.
 * This will allow the user to add something to a message by creating a new message with additions or changes to the
 * unexpandedDescriptors and copying what is possible to copy from the original message. */
char** codes_bufr_copy_data_return_copied_keys(codes_handle* hin, codes_handle* hout, size_t* nkeys, int* err);
int codes_bufr_copy_data(codes_handle* hin, codes_handle* hout);


/*! Step to the next item from the keys iterator.
 *  @param kiter         : valid codes_keys_iterator
 *  @return              1 if next iterator exists, 0 if no more elements to iterate on
 */
int codes_keys_iterator_next(codes_keys_iterator* kiter);


/*! get the key name from the keys iterator
 *  @param kiter         : valid codes_keys_iterator
 *  @return              key name
 */
const char* codes_keys_iterator_get_name(const codes_keys_iterator* kiter);

/*! Delete the keys iterator.
 *  @param kiter         : valid codes_keys_iterator
 *  @return              0 if OK, integer value on error
 */
int codes_keys_iterator_delete(codes_keys_iterator* kiter);

/*! Rewind the keys iterator.
 *  @param kiter         : valid codes_keys_iterator
 *  @return              0 if OK, integer value on error
 */
int codes_keys_iterator_rewind(codes_keys_iterator* kiter);


int codes_keys_iterator_set_flags(codes_keys_iterator* kiter, unsigned long flags);
int codes_keys_iterator_get_long(const codes_keys_iterator* kiter, long* v, size_t* len);
int codes_keys_iterator_get_double(const codes_keys_iterator* kiter, double* v, size_t* len);
int codes_keys_iterator_get_float(const codes_keys_iterator* kiter, float* v, size_t* len);
int codes_keys_iterator_get_string(const codes_keys_iterator* kiter, char* v, size_t* len);
int codes_keys_iterator_get_bytes(const codes_keys_iterator* kiter, unsigned char* v, size_t* len);

/* @} */

void codes_update_sections_lengths(codes_handle* h);


/**
 * Convert an error code into a string
 * @param code       : the error code
 * @return           the error message
 */
const char* codes_get_error_message(int code);
const char* codes_get_type_name(int type);

int codes_get_native_type(const codes_handle* h, const char* name, int* type);

void codes_check(const char* call, const char* file, int line, int e, const char* msg);
#define CODES_CHECK(a, msg)        GRIB_CHECK(a, msg)
#define CODES_CHECK_NOLINE(a, msg) GRIB_CHECK_NOLINE(a, msg)


int codes_set_values(codes_handle* h, codes_values* codes_values, size_t arg_count);
codes_handle* codes_handle_new_from_partial_message_copy(codes_context* c, const void* data, size_t size);
codes_handle* codes_handle_new_from_partial_message(codes_context* c, const void* data, size_t buflen);

/* Check whether the given key has the value 'missing'.
   Returns a bool i.e. 0 or 1. The error code is an argument */
int codes_is_missing(const codes_handle* h, const char* key, int* err);

/* Check whether the given key is defined (exists).
   Returns a bool i.e. 0 or 1 */
int codes_is_defined(const codes_handle* h, const char* key);

/* Returns 1 if the key is computed (virtual) and 0 if it is coded */
int codes_key_is_computed(const grib_handle* h, const char* key, int* err);

/* Returns 1 if the BUFR key is in the header and 0 if it is in the data section.
   The error code is the final argument */
int codes_bufr_key_is_header(const codes_handle* h, const char* key, int* err);

/* Returns 1 if the BUFR key is a coordinate descriptor and 0 otherwise.
   The error code is the final argument */
int codes_bufr_key_is_coordinate(const codes_handle* h, const char* key, int* err);

/* Set the given key to have the value 'missing' */
int codes_set_missing(codes_handle* h, const char* key);

/* The truncation is the Gaussian number (also called order) */
int codes_get_gaussian_latitudes(long truncation, double* latitudes);

int codes_julian_to_datetime(double jd, long* year, long* month, long* day, long* hour, long* minute, long* second);
int codes_datetime_to_julian(long year, long month, long day, long hour, long minute, long second, double* jd);
long codes_julian_to_date(long jdate);
long codes_date_to_julian(long ddate);

void codes_get_reduced_row(long pl, double lon_first, double lon_last, long* npoints, long* ilon_first, long* ilon_last);
void codes_get_reduced_row_p(long pl, double lon_first, double lon_last, long* npoints, double* olon_first, double* olon_last);


/* read products */
int codes_get_message_offset(const codes_handle* h, off_t* offset);
int codes_get_message_size(const codes_handle* h, size_t* size);
int codes_get_product_kind(const codes_handle* h, ProductKind* product_kind);
int codes_check_message_header(const void* bytes, size_t length, ProductKind product);
int codes_check_message_footer(const void* bytes, size_t length, ProductKind product);

/* Features */
#define CODES_FEATURES_ALL      0
#define CODES_FEATURES_ENABLED  1
#define CODES_FEATURES_DISABLED 2
int codes_is_feature_enabled(const char* feature);
/* result is a space-separated list of features and
   must be allocated by the caller (its length must be large enough) */
int codes_get_features(char* result, size_t* length, int select);

/* --------------------------------------- */
#define CODES_UTIL_GRID_SPEC_REGULAR_LL                   GRIB_UTIL_GRID_SPEC_REGULAR_LL
#define CODES_UTIL_GRID_SPEC_ROTATED_LL                   GRIB_UTIL_GRID_SPEC_ROTATED_LL
#define CODES_UTIL_GRID_SPEC_REGULAR_GG                   GRIB_UTIL_GRID_SPEC_REGULAR_GG
#define CODES_UTIL_GRID_SPEC_ROTATED_GG                   GRIB_UTIL_GRID_SPEC_ROTATED_GG
#define CODES_UTIL_GRID_SPEC_REDUCED_GG                   GRIB_UTIL_GRID_SPEC_REDUCED_GG
#define CODES_UTIL_GRID_SPEC_SH                           GRIB_UTIL_GRID_SPEC_SH
#define CODES_UTIL_GRID_SPEC_REDUCED_LL                   GRIB_UTIL_GRID_SPEC_REDUCED_LL
#define CODES_UTIL_GRID_SPEC_POLAR_STEREOGRAPHIC          GRIB_UTIL_GRID_SPEC_POLAR_STEREOGRAPHIC
#define CODES_UTIL_GRID_SPEC_REDUCED_ROTATED_GG           GRIB_UTIL_GRID_SPEC_REDUCED_ROTATED_GG
#define CODES_UTIL_GRID_SPEC_LAMBERT_AZIMUTHAL_EQUAL_AREA GRIB_UTIL_GRID_SPEC_LAMBERT_AZIMUTHAL_EQUAL_AREA
#define CODES_UTIL_GRID_SPEC_LAMBERT_CONFORMAL            GRIB_UTIL_GRID_SPEC_LAMBERT_CONFORMAL
#define CODES_UTIL_GRID_SPEC_UNSTRUCTURED                 GRIB_UTIL_GRID_SPEC_UNSTRUCTURED
#define CODES_UTIL_GRID_SPEC_HEALPIX                      GRIB_UTIL_GRID_SPEC_HEALPIX

#define CODES_UTIL_PACKING_TYPE_SAME_AS_INPUT      GRIB_UTIL_PACKING_TYPE_SAME_AS_INPUT
#define CODES_UTIL_PACKING_TYPE_SPECTRAL_COMPLEX   GRIB_UTIL_PACKING_TYPE_SPECTRAL_COMPLEX
#define CODES_UTIL_PACKING_TYPE_SPECTRAL_SIMPLE    GRIB_UTIL_PACKING_TYPE_SPECTRAL_SIMPLE
#define CODES_UTIL_PACKING_TYPE_JPEG               GRIB_UTIL_PACKING_TYPE_JPEG
#define CODES_UTIL_PACKING_TYPE_GRID_COMPLEX       GRIB_UTIL_PACKING_TYPE_GRID_COMPLEX
#define CODES_UTIL_PACKING_TYPE_GRID_SIMPLE        GRIB_UTIL_PACKING_TYPE_GRID_SIMPLE
#define CODES_UTIL_PACKING_TYPE_GRID_SIMPLE_MATRIX GRIB_UTIL_PACKING_TYPE_GRID_SIMPLE_MATRIX
#define CODES_UTIL_PACKING_TYPE_GRID_SECOND_ORDER  GRIB_UTIL_PACKING_TYPE_GRID_SECOND_ORDER
#define CODES_UTIL_PACKING_TYPE_CCSDS              GRIB_UTIL_PACKING_TYPE_CCSDS
#define CODES_UTIL_PACKING_TYPE_IEEE               GRIB_UTIL_PACKING_TYPE_IEEE
#define CODES_UTIL_PACKING_SAME_AS_INPUT           GRIB_UTIL_PACKING_SAME_AS_INPUT
#define CODES_UTIL_PACKING_USE_PROVIDED            GRIB_UTIL_PACKING_USE_PROVIDED

#define CODES_UTIL_ACCURACY_SAME_BITS_PER_VALUES_AS_INPUT      GRIB_UTIL_ACCURACY_SAME_BITS_PER_VALUES_AS_INPUT
#define CODES_UTIL_ACCURACY_USE_PROVIDED_BITS_PER_VALUES       GRIB_UTIL_ACCURACY_USE_PROVIDED_BITS_PER_VALUES
#define CODES_UTIL_ACCURACY_SAME_DECIMAL_SCALE_FACTOR_AS_INPUT GRIB_UTIL_ACCURACY_SAME_DECIMAL_SCALE_FACTOR_AS_INPUT
#define CODES_UTIL_ACCURACY_USE_PROVIDED_DECIMAL_SCALE_FACTOR  GRIB_UTIL_ACCURACY_USE_PROVIDED_DECIMAL_SCALE_FACTOR

codes_handle* codes_grib_util_set_spec(codes_handle* h,
                                       const codes_util_grid_spec* grid_spec,
                                       const codes_util_packing_spec* packing_spec, /* NULL for defaults (same as input) */
                                       int flags,
                                       const double* data_values,
                                       size_t data_values_count,
                                       int* err);

/* Build an array of message headers from input BUFR file.
 * result = array of 'codes_bufr_header' structs with 'num_messages' elements.
 *          This array should be freed by the caller.
 * num_messages = number of messages found in the input file.
 * strict = If 1 means fail if any message is invalid.
 * returns 0 if OK, integer value on error.
 */
int codes_bufr_extract_headers_malloc(codes_context* c, const char* filename, codes_bufr_header** result, int* num_messages, int strict_mode);
int codes_bufr_header_get_string(codes_bufr_header* bh, const char* key, char* val, size_t* len);

/* Build an array of message offsets from input file. The client has to supply the ProductKind (GRIB, BUFR etc)
 * result = array of offsets with 'num_messages' elements.
 *          This array should be freed by the caller.
 * num_messages = number of messages found in the input file.
 * strict_mode  = If 1 means fail if any message is invalid.
 * returns 0 if OK, integer value on error.
 */
int codes_extract_offsets_malloc(codes_context* c, const char* filename, ProductKind product,
                                 off_t** offsets, int* num_messages, int strict_mode);
int codes_extract_offsets_sizes_malloc(codes_context* c, const char* filename, ProductKind product,
                                       off_t** offsets, size_t** sizes, int* num_messages, int strict_mode);


/* EXPERIMENTAL FEATURE
 * For GRIB2, argument must be an entry in Code Table 4.5 (Fixed surface types and units).
 * Output is 1 if the surface type requires its scaledValue/scaleFactor i.e., has a level
 * Otherwise 0 i.e., scaledValue/scaleFactor must be set to MISSING
 */
int codes_grib_surface_type_requires_value(int edition, int type_of_surface_code, int* err);


/* --------------------------------------- */
#ifdef __cplusplus
}
#endif
#endif
/* This part is automatically generated by ./errors.pl, do not edit */
#ifndef eccodes_errors_H
#define eccodes_errors_H
/*! \defgroup errors Error codes
Error codes returned by the eccodes functions.
*/
/*! @{*/
/** No error */
#define CODES_SUCCESS		GRIB_SUCCESS
/** End of resource reached */
#define CODES_END_OF_FILE		GRIB_END_OF_FILE
/** Internal error */
#define CODES_INTERNAL_ERROR		GRIB_INTERNAL_ERROR
/** Passed buffer is too small */
#define CODES_BUFFER_TOO_SMALL		GRIB_BUFFER_TOO_SMALL
/** Function not yet implemented */
#define CODES_NOT_IMPLEMENTED		GRIB_NOT_IMPLEMENTED
/** Missing 7777 at end of message */
#define CODES_7777_NOT_FOUND		GRIB_7777_NOT_FOUND
/** Passed array is too small */
#define CODES_ARRAY_TOO_SMALL		GRIB_ARRAY_TOO_SMALL
/** File not found */
#define CODES_FILE_NOT_FOUND		GRIB_FILE_NOT_FOUND
/** Code not found in code table */
#define CODES_CODE_NOT_FOUND_IN_TABLE		GRIB_CODE_NOT_FOUND_IN_TABLE
/** Array size mismatch */
#define CODES_WRONG_ARRAY_SIZE		GRIB_WRONG_ARRAY_SIZE
/** Key/value not found */
#define CODES_NOT_FOUND		GRIB_NOT_FOUND
/** Input output problem */
#define CODES_IO_PROBLEM		GRIB_IO_PROBLEM
/** Message invalid */
#define CODES_INVALID_MESSAGE		GRIB_INVALID_MESSAGE
/** Decoding invalid */
#define CODES_DECODING_ERROR		GRIB_DECODING_ERROR
/** Encoding invalid */
#define CODES_ENCODING_ERROR		GRIB_ENCODING_ERROR
/** Code cannot unpack because of string too small */
#define CODES_NO_MORE_IN_SET		GRIB_NO_MORE_IN_SET
/** Problem with calculation of geographic attributes */
#define CODES_GEOCALCULUS_PROBLEM		GRIB_GEOCALCULUS_PROBLEM
/** Memory allocation error */
#define CODES_OUT_OF_MEMORY		GRIB_OUT_OF_MEMORY
/** Value is read only */
#define CODES_READ_ONLY		GRIB_READ_ONLY
/** Invalid argument */
#define CODES_INVALID_ARGUMENT		GRIB_INVALID_ARGUMENT
/** Null handle */
#define CODES_NULL_HANDLE		GRIB_NULL_HANDLE
/** Invalid section number */
#define CODES_INVALID_SECTION_NUMBER		GRIB_INVALID_SECTION_NUMBER
/** Value cannot be missing */
#define CODES_VALUE_CANNOT_BE_MISSING		GRIB_VALUE_CANNOT_BE_MISSING
/** Wrong message length */
#define CODES_WRONG_LENGTH		GRIB_WRONG_LENGTH
/** Invalid key type */
#define CODES_INVALID_TYPE		GRIB_INVALID_TYPE
/** Unable to set step */
#define CODES_WRONG_STEP		GRIB_WRONG_STEP
/** Wrong units for step (step must be integer) */
#define CODES_WRONG_STEP_UNIT		GRIB_WRONG_STEP_UNIT
/** Invalid file id */
#define CODES_INVALID_FILE		GRIB_INVALID_FILE
/** Invalid GRIB id */
#define CODES_INVALID_GRIB		GRIB_INVALID_GRIB
/** Invalid index id */
#define CODES_INVALID_INDEX		GRIB_INVALID_INDEX
/** Invalid iterator id */
#define CODES_INVALID_ITERATOR		GRIB_INVALID_ITERATOR
/** Invalid keys iterator id */
#define CODES_INVALID_KEYS_ITERATOR		GRIB_INVALID_KEYS_ITERATOR
/** Invalid nearest id */
#define CODES_INVALID_NEAREST		GRIB_INVALID_NEAREST
/** Invalid order by */
#define CODES_INVALID_ORDERBY		GRIB_INVALID_ORDERBY
/** Missing a key from the fieldset */
#define CODES_MISSING_KEY		GRIB_MISSING_KEY
/** The point is out of the grid area */
#define CODES_OUT_OF_AREA		GRIB_OUT_OF_AREA
/** Concept no match */
#define CODES_CONCEPT_NO_MATCH		GRIB_CONCEPT_NO_MATCH
/** Hash array no match */
#define CODES_HASH_ARRAY_NO_MATCH		GRIB_HASH_ARRAY_NO_MATCH
/** Definitions files not found */
#define CODES_NO_DEFINITIONS		GRIB_NO_DEFINITIONS
/** Wrong type while packing */
#define CODES_WRONG_TYPE		GRIB_WRONG_TYPE
/** End of resource */
#define CODES_END		GRIB_END
/** Unable to code a field without values */
#define CODES_NO_VALUES		GRIB_NO_VALUES
/** Grid description is wrong or inconsistent */
#define CODES_WRONG_GRID		GRIB_WRONG_GRID
/** End of index reached */
#define CODES_END_OF_INDEX		GRIB_END_OF_INDEX
/** Null index */
#define CODES_NULL_INDEX		GRIB_NULL_INDEX
/** End of resource reached when reading message */
#define CODES_PREMATURE_END_OF_FILE		GRIB_PREMATURE_END_OF_FILE
/** An internal array is too small */
#define CODES_INTERNAL_ARRAY_TOO_SMALL		GRIB_INTERNAL_ARRAY_TOO_SMALL
/** Message is too large for the current architecture */
#define CODES_MESSAGE_TOO_LARGE		GRIB_MESSAGE_TOO_LARGE
/** Constant field */
#define CODES_CONSTANT_FIELD		GRIB_CONSTANT_FIELD
/** Switch unable to find a matching case */
#define CODES_SWITCH_NO_MATCH		GRIB_SWITCH_NO_MATCH
/** Underflow */
#define CODES_UNDERFLOW		GRIB_UNDERFLOW
/** Message malformed */
#define CODES_MESSAGE_MALFORMED		GRIB_MESSAGE_MALFORMED
/** Index is corrupted */
#define CODES_CORRUPTED_INDEX		GRIB_CORRUPTED_INDEX
/** Invalid number of bits per value */
#define CODES_INVALID_BPV		GRIB_INVALID_BPV
/** Edition of two messages is different */
#define CODES_DIFFERENT_EDITION		GRIB_DIFFERENT_EDITION
/** Value is different */
#define CODES_VALUE_DIFFERENT		GRIB_VALUE_DIFFERENT
/** Invalid key value */
#define CODES_INVALID_KEY_VALUE		GRIB_INVALID_KEY_VALUE
/** String is smaller than requested */
#define CODES_STRING_TOO_SMALL		GRIB_STRING_TOO_SMALL
/** Wrong type conversion */
#define CODES_WRONG_CONVERSION		GRIB_WRONG_CONVERSION
/** Missing BUFR table entry for descriptor */
#define CODES_MISSING_BUFR_ENTRY		GRIB_MISSING_BUFR_ENTRY
/** Null pointer */
#define CODES_NULL_POINTER		GRIB_NULL_POINTER
/** Attribute is already present, cannot add */
#define CODES_ATTRIBUTE_CLASH		GRIB_ATTRIBUTE_CLASH
/** Too many attributes. Increase MAX_ACCESSOR_ATTRIBUTES */
#define CODES_TOO_MANY_ATTRIBUTES		GRIB_TOO_MANY_ATTRIBUTES
/** Attribute not found. */
#define CODES_ATTRIBUTE_NOT_FOUND		GRIB_ATTRIBUTE_NOT_FOUND
/** Edition not supported. */
#define CODES_UNSUPPORTED_EDITION		GRIB_UNSUPPORTED_EDITION
/** Value out of coding range */
#define CODES_OUT_OF_RANGE		GRIB_OUT_OF_RANGE
/** Size of bitmap is incorrect */
#define CODES_WRONG_BITMAP_SIZE		GRIB_WRONG_BITMAP_SIZE
/** Functionality not enabled */
#define CODES_FUNCTIONALITY_NOT_ENABLED		GRIB_FUNCTIONALITY_NOT_ENABLED
/** Value mismatch */
#define CODES_VALUE_MISMATCH		GRIB_VALUE_MISMATCH
/** Double values are different */
#define CODES_DOUBLE_VALUE_MISMATCH		GRIB_DOUBLE_VALUE_MISMATCH
/** Long values are different */
#define CODES_LONG_VALUE_MISMATCH		GRIB_LONG_VALUE_MISMATCH
/** Byte values are different */
#define CODES_BYTE_VALUE_MISMATCH		GRIB_BYTE_VALUE_MISMATCH
/** String values are different */
#define CODES_STRING_VALUE_MISMATCH		GRIB_STRING_VALUE_MISMATCH
/** Offset mismatch */
#define CODES_OFFSET_MISMATCH		GRIB_OFFSET_MISMATCH
/** Count mismatch */
#define CODES_COUNT_MISMATCH		GRIB_COUNT_MISMATCH
/** Name mismatch */
#define CODES_NAME_MISMATCH		GRIB_NAME_MISMATCH
/** Type mismatch */
#define CODES_TYPE_MISMATCH		GRIB_TYPE_MISMATCH
/** Type and value mismatch */
#define CODES_TYPE_AND_VALUE_MISMATCH		GRIB_TYPE_AND_VALUE_MISMATCH
/** Unable to compare accessors */
#define CODES_UNABLE_TO_COMPARE_ACCESSORS		GRIB_UNABLE_TO_COMPARE_ACCESSORS
/** Assertion failure */
#define CODES_ASSERTION_FAILURE		GRIB_ASSERTION_FAILURE
/** Runtime error */
#define CODES_RUNTIME_ERROR		GRIB_RUNTIME_ERROR
/*! @}*/
#endif
