Aborted_clients

The number of connections that were aborted because the client died without closing the connection properly. See Section B.5.2.11, “Communication Errors and Aborted Connections”.

Aborted_connects

The number of failed attempts to connect to the MySQL server. See Section B.5.2.11, “Communication Errors and Aborted Connections”.

Binlog_cache_disk_use

The number of transactions that used the temporary binary log cache but that exceeded the value of binlog_cache_size and used a temporary file to store statements from the transaction.

Binlog_cache_use

The number of transactions that used the temporary binary log cache.

Bytes_received

The number of bytes received from all clients.

Bytes_sent

The number of bytes sent to all clients.

Com_xxx

The Com_xxx statement counter variables indicate the number of times each xxx statement has been executed. There is one status variable for each type of statement. For example, Com_delete and Com_insert count DELETE and INSERT statements, respectively. However, if a query result is returned from query cache, the server increments the Qcache_hits status variable, not Com_select. See Section 7.5.5.4, “Query Cache Status and Maintenance”.

All of the Com_stmt_xxx variables are increased even if a prepared statement argument is unknown or an error occurred during execution. In other words, their values correspond to the number of requests issued, not to the number of requests successfully completed.

The Com_stmt_xxx status variables are as follows:

Those variables stand for prepared statement commands. Their names refer to the COM_xxx command set used in the network layer. In other words, their values increase whenever prepared statement API calls such as mysql_stmt_prepare(), mysql_stmt_execute(), and so forth are executed. However, Com_stmt_prepare, Com_stmt_execute and Com_stmt_close also increase for PREPARE, EXECUTE, or DEALLOCATE PREPARE, respectively. Additionally, the values of the older statement counter variables Com_prepare_sql, Com_execute_sql, and Com_dealloc_sql increase for the PREPARE, EXECUTE, and DEALLOCATE PREPARE statements. Com_stmt_fetch stands for the total number of network round-trips issued when fetching from cursors.

Com_stmt_reprepare indicated the number of times statements were automatically reprepared by the server after metadata changes to tables or views referred to by the statement. A reprepare operation increments Com_stmt_reprepare is incremented, and also Com_stmt_prepare.

Compression

Whether the client connection uses compression in the client/server protocol.

Connections

The number of connection attempts (successful or not) to the MySQL server.

Created_tmp_disk_tables

The number of internal on-disk temporary tables created by the server while executing statements.

If an internal temporary table is created initially as an in-memory table but becomes too large, MySQL automatically converts it to an on-disk table. The maximum size for in-memory temporary tables is the minimum of the tmp_table_size and max_heap_table_size values. If Created_tmp_disk_tables is large, you may want to increase the tmp_table_size or max_heap_table_size values. value to lessen the likelihood that internal temporary tables in memory will be converted to on-disk tables.

You can compare the number of internal on-disk temporary tables created to the total number of internal temporary tables created by comparing the values of the Created_tmp_disk_tables and Created_tmp_tables variables.

See also Section 7.5.10, “How MySQL Uses Internal Temporary Tables”.

Created_tmp_files

How many temporary files mysqld has created.

Created_tmp_tables

The number of internal temporary tables created by the server while executing statements.

You can compare the number of internal on-disk temporary tables created to the total number of internal temporary tables created by comparing the values of the Created_tmp_disk_tables and Created_tmp_tables variables.

See also Section 7.5.10, “How MySQL Uses Internal Temporary Tables”.

Each invocation of the SHOW STATUS statement uses an internal temporary table and increments the global Created_tmp_tables value.

Delayed_errors

The number of rows written with INSERT DELAYED for which some error occurred (probably duplicate key).

Delayed_insert_threads

The number of INSERT DELAYED handler threads in use.

Delayed_writes

The number of INSERT DELAYED rows written.

Flush_commands

The number of executed FLUSH statements.

Handler_commit

The number of internal COMMIT statements.

Handler_delete

The number of times that rows have been deleted from tables.

Handler_prepare

A counter for the prepare phase of two-phase commit operations.

Handler_read_first

The number of times the first entry in an index was read. If this value is high, it suggests that the server is doing a lot of full index scans; for example, SELECT col1 FROM foo, assuming that col1 is indexed.

Handler_read_key

The number of requests to read a row based on a key. If this value is high, it is a good indication that your tables are properly indexed for your queries.

Handler_read_next

The number of requests to read the next row in key order. This value is incremented if you are querying an index column with a range constraint or if you are doing an index scan.

Handler_read_prev

The number of requests to read the previous row in key order. This read method is mainly used to optimize ORDER BY ... DESC.

Handler_read_rnd

The number of requests to read a row based on a fixed position. This value is high if you are doing a lot of queries that require sorting of the result. You probably have a lot of queries that require MySQL to scan entire tables or you have joins that don't use keys properly.

Handler_read_rnd_next

The number of requests to read the next row in the data file. This value is high if you are doing a lot of table scans. Generally this suggests that your tables are not properly indexed or that your queries are not written to take advantage of the indexes you have.

Handler_rollback

The number of requests for a storage engine to perform a rollback operation.

Handler_savepoint

The number of requests for a storage engine to place a savepoint.

Handler_savepoint_rollback

The number of requests for a storage engine to roll back to a savepoint.

Handler_update

The number of requests to update a row in a table.

Handler_write

The number of requests to insert a row in a table.

Innodb_buffer_pool_pages_data

The number of pages containing data (dirty or clean).

Innodb_buffer_pool_pages_dirty

The number of pages currently dirty.

Innodb_buffer_pool_pages_flushed

The number of buffer pool page-flush requests.

Innodb_buffer_pool_pages_free

The number of free pages.

Innodb_buffer_pool_pages_latched

The number of latched pages in InnoDB buffer pool. These are pages currently being read or written or that cannot be flushed or removed for some other reason. Calculation of this variable is expensive, so it is available only when the UNIV_DEBUG system is defined at server build time.

Innodb_buffer_pool_pages_misc

The number of pages that are busy because they have been allocated for administrative overhead such as row locks or the adaptive hash index. This value can also be calculated as Innodb_buffer_pool_pages_total – Innodb_buffer_pool_pages_free – Innodb_buffer_pool_pages_data.

Innodb_buffer_pool_pages_total

The total size of the buffer pool, in pages.

Innodb_buffer_pool_read_ahead

The number of pages read into the InnoDB buffer pool by the read-ahead background thread.

Innodb_buffer_pool_read_ahead_evicted

The number of pages read into the InnoDB buffer pool by the read-ahead background thread that were subsequently evicted without having been accessed by queries.

Innodb_buffer_pool_read_requests

The number of logical read requests InnoDB has done.

Innodb_buffer_pool_reads

The number of logical reads that InnoDB could not satisfy from the buffer pool, and had to read directly from the disk.

Innodb_buffer_pool_wait_free

Normally, writes to the InnoDB buffer pool happen in the background. However, if it is necessary to read or create a page and no clean pages are available, it is also necessary to wait for pages to be flushed first. This counter counts instances of these waits. If the buffer pool size has been set properly, this value should be small.

Innodb_buffer_pool_write_requests

The number writes done to the InnoDB buffer pool.

Innodb_data_fsyncs

The number of fsync() operations so far.

Innodb_data_pending_fsyncs

The current number of pending fsync() operations.

Innodb_data_pending_reads

The current number of pending reads.

Innodb_data_pending_writes

The current number of pending writes.

Innodb_data_read

The amount of data read since the server was started.

Innodb_data_reads

The total number of data reads.

Innodb_data_writes

The total number of data writes.

Innodb_data_written

The amount of data written so far, in bytes.

Innodb_dblwr_pages_written

The number of pages that have been written for doublewrite operations. See Section 13.6.11.1, “InnoDB Disk I/O”.

Innodb_dblwr_writes

The number of doublewrite operations that have been performed. See Section 13.6.11.1, “InnoDB Disk I/O”.

Innodb_have_atomic_builtins

Indicates whether the server was built with atomic instructions. This variable was added in in MySQL 5.4.2.

Innodb_have_sync_atomic

Indicates whether the server was built with atomic instructions. This variable was renamed to Innodb_have_atomic_builtins in MySQL 5.4.2.

Innodb_heap_enabled

Indicates whether the built-in InnoDB memory manager is used. (ON means it is used, OFF means it is not.) This variable was removed in in MySQL 5.4.2.

Innodb_log_waits

The number of times that the log buffer was too small and a wait was required for it to be flushed before continuing.

Innodb_log_write_requests

The number of log write requests.

Innodb_log_writes

The number of physical writes to the log file.

Innodb_os_log_fsyncs

The number of fsync() writes done to the log file.

Innodb_os_log_pending_fsyncs

The number of pending log file fsync() operations.

Innodb_os_log_pending_writes

The number of pending log file writes.

Innodb_os_log_written

The number of bytes written to the log file.

Innodb_page_size

The compiled-in InnoDB page size (default 16KB). Many values are counted in pages; the page size allows them to be easily converted to bytes.

Innodb_pages_created

The number of pages created.

Innodb_pages_read

The number of pages read.

Innodb_pages_written

The number of pages written.

Innodb_row_lock_current_waits

The number of row locks currently being waited for.

Innodb_row_lock_time

The total time spent in acquiring row locks, in milliseconds.

Innodb_row_lock_time_avg

The average time to acquire a row lock, in milliseconds.

Innodb_row_lock_time_max

The maximum time to acquire a row lock, in milliseconds.

Innodb_row_lock_waits

The number of times a row lock had to be waited for.

Innodb_rows_deleted

The number of rows deleted from InnoDB tables.

Innodb_rows_inserted

The number of rows inserted into InnoDB tables.

Innodb_rows_read

The number of rows read from InnoDB tables.

Innodb_rows_updated

The number of rows updated in InnoDB tables.

Innodb_wake_ups

The number of wakeups that should not have occurred. These are wakeups in a condition on a mutex when the condition is not yet met so the thread must go back to sleep. This variable was removed in in MySQL 5.4.2.

Key_blocks_not_flushed

The number of key blocks in the key cache that have changed but have not yet been flushed to disk.

Key_blocks_unused

The number of unused blocks in the key cache. You can use this value to determine how much of the key cache is in use; see the discussion of key_buffer_size in Section 5.1.4, “Server System Variables”.

Key_blocks_used

The number of used blocks in the key cache. This value is a high-water mark that indicates the maximum number of blocks that have ever been in use at one time.

Key_read_requests

The number of requests to read a key block from the cache.

Key_reads

The number of physical reads of a key block from disk. If Key_reads is large, then your key_buffer_size value is probably too small. The cache miss rate can be calculated as Key_reads/Key_read_requests.

Key_write_requests

The number of requests to write a key block to the cache.

Key_writes

The number of physical writes of a key block to disk.

Last_query_cost

The total cost of the last compiled query as computed by the query optimizer. This is useful for comparing the cost of different query plans for the same query. The default value of 0 means that no query has been compiled yet. The default value is 0. Last_query_cost has session scope.

The Last_query_cost value can be computed accurately only for simple “flat” queries, not complex queries such as those with subqueries or UNION. For the latter, the value is set to 0.

Max_used_connections

The maximum number of connections that have been in use simultaneously since the server started.

Not_flushed_delayed_rows

The number of rows waiting to be written in INSERT DELAY queues.

Open_files

The number of files that are open. This count includes regular files opened by the server. It does not include other types of files such as sockets or pipes. Also, the count does not include files that storage engines open using their own internal functions rather than asking the server level to do so.

Open_streams

The number of streams that are open (used mainly for logging).

Open_table_definitions

The number of cached .frm files.

Open_tables

The number of tables that are open.

Opened_files

The number of files that have been opened with my_open() (a mysys library function). Parts of the server that open files without using this function do not increment the count.

Opened_table_definitions

The number of .frm files that have been cached.

Opened_tables

The number of tables that have been opened. If Opened_tables is big, your table_open_cache value is probably too small.

Prepared_stmt_count

The current number of prepared statements. (The maximum number of statements is given by the max_prepared_stmt_count system variable.)

Qcache_free_blocks

The number of free memory blocks in the query cache.

Qcache_free_memory

The amount of free memory for the query cache.

Qcache_hits

The number of query cache hits.

Qcache_inserts

The number of queries added to the query cache.

Qcache_lowmem_prunes

The number of queries that were deleted from the query cache because of low memory.

Qcache_not_cached

The number of noncached queries (not cacheable, or not cached due to the query_cache_type setting).

Qcache_queries_in_cache

The number of queries registered in the query cache.

Qcache_total_blocks

The total number of blocks in the query cache.

Queries

The number of statements executed by the server. This variable includes statements executed within stored programs, unlike the Questions variable.

Questions

The number of statements executed by the server. This includes only statements sent to the server by clients and not statements executed within stored programs, unlike the Queries variable.

Rpl_semi_sync_master_clients

The number of semisynchronous slaves.

This variable is available only if the master-side semisynchronous replication plugin is installed.

Rpl_semi_sync_master_net_avg_wait_time

The average time the master waited for a slave reply.

This variable is available only if the master-side semisynchronous replication plugin is installed.

Rpl_semi_sync_master_net_wait_time

The total time the master waited for slave replies.

This variable is available only if the master-side semisynchronous replication plugin is installed.

Rpl_semi_sync_master_net_waits

The total number of times the master waited for slave replies.

This variable is available only if the master-side semisynchronous replication plugin is installed.

Rpl_semi_sync_master_no_times

The number of times the master turned off semisynchronous replication.

This variable is available only if the master-side semisynchronous replication plugin is installed.

Rpl_semi_sync_master_no_tx

The number of commits that were not acknowledged successfully by a slave.

This variable is available only if the master-side semisynchronous replication plugin is installed.

Rpl_semi_sync_master_status

Whether semisynchronous replication currently is operational on the master. The value is 1 if the plugin has been enabled and a commit acknowledgment has not occurred. It is 0 if the plugin is not enabled or the master has fallen back to asynchronous replication due to commit acknowledgment timeout.

This variable is available only if the master-side semisynchronous replication plugin is installed.

Rpl_semi_sync_master_timefunc_failures

The number of times the master failed when calling time functions such as gettimeofday().

This variable is available only if the master-side semisynchronous replication plugin is installed.

Rpl_semi_sync_master_tx_avg_wait_time

The average time the master waited for each transaction.

This variable is available only if the master-side semisynchronous replication plugin is installed.

Rpl_semi_sync_master_tx_wait_time

The total time the master waited for transactions.

This variable is available only if the master-side semisynchronous replication plugin is installed.

Rpl_semi_sync_master_tx_waits

The total number of times the master waited for transactions.

This variable is available only if the master-side semisynchronous replication plugin is installed.

Rpl_semi_sync_master_wait_pos_backtraverse

The total number of times the master waited for an event with binary coordinates lower than events waited for previously. This can occur when the order in which transactions start waiting for a reply is different from the order in which their binary log events are written.

This variable is available only if the master-side semisynchronous replication plugin is installed.

Rpl_semi_sync_master_wait_sessions

The number of sessions currently waiting for slave replies.

This variable is available only if the master-side semisynchronous replication plugin is installed.

Rpl_semi_sync_master_yes_tx

The number of commits that were acknowledged successfully by a slave.

This variable is available only if the master-side semisynchronous replication plugin is installed.

Rpl_semi_sync_slave_status

Whether semisynchronous replication currently is operational on the slave. This is 1 if the plugin has been enabled and the slave I/O thread is running, 0 otherwise.

This variable is available only if the slave-side semisynchronous replication plugin is installed.

Rpl_status

The status of fail-safe replication (not yet implemented).

Select_full_join

The number of joins that perform table scans because they do not use indexes. If this value is not 0, you should carefully check the indexes of your tables.

Select_full_range_join

The number of joins that used a range search on a reference table.

Select_range

The number of joins that used ranges on the first table. This is normally not a critical issue even if the value is quite large.

Select_range_check

The number of joins without keys that check for key usage after each row. If this is not 0, you should carefully check the indexes of your tables.

Select_scan

The number of joins that did a full scan of the first table.

Slave_heartbeat_period

Shows the replication heartbeat interval (in seconds) on a replication slave.

Slave_open_temp_tables

The number of temporary tables that the slave SQL thread currently has open.

Slave_received_heartbeats

This counter increments with each replication heartbeat received by a replication slave since the last time that the slave was restarted or reset, or a CHANGE MASTER TO statement was issued.

Slave_retried_transactions

The total number of times since startup that the replication slave SQL thread has retried transactions.

Slave_running

This is ON if this server is a replication slave that is connected to a replication master, and both the I/O and SQL threads are running; otherwise, it is OFF.

Slow_launch_threads

The number of threads that have taken more than slow_launch_time seconds to create.

Slow_queries

The number of queries that have taken more than long_query_time seconds. See Section 5.2.5, “The Slow Query Log”.

Sort_merge_passes

The number of merge passes that the sort algorithm has had to do. If this value is large, you should consider increasing the value of the sort_buffer_size system variable.

Sort_range

The number of sorts that were done using ranges.

Sort_rows

The number of sorted rows.

Sort_scan

The number of sorts that were done by scanning the table.

Ssl_accept_renegotiates

The number of negotiates needed to establish the connection.

Ssl_accepts

The number of accepted SSL connections.

Ssl_callback_cache_hits

The number of callback cache hits.

Ssl_cipher

The current SSL cipher (empty for non-SSL connections).

Ssl_cipher_list

The list of possible SSL ciphers.

Ssl_client_connects

The number of SSL connection attempts to an SSL-enabled master.

Ssl_connect_renegotiates

The number of negotiates needed to establish the connection to an SSL-enabled master.

Ssl_ctx_verify_depth

The SSL context verification depth (how many certificates in the chain are tested).

Ssl_ctx_verify_mode

The SSL context verification mode.

Ssl_default_timeout

The default SSL timeout.

Ssl_finished_accepts

The number of successful SSL connections to the server.

Ssl_finished_connects

The number of successful slave connections to an SSL-enabled master.

Ssl_session_cache_hits

The number of SSL session cache hits.

Ssl_session_cache_misses

The number of SSL session cache misses.

Ssl_session_cache_mode

The SSL session cache mode.

Ssl_session_cache_overflows

The number of SSL session cache overflows.

Ssl_session_cache_size

The SSL session cache size.

Ssl_session_cache_timeouts

The number of SSL session cache timeouts.

Ssl_sessions_reused

How many SSL connections were reused from the cache.

Ssl_used_session_cache_entries

How many SSL session cache entries were used.

Ssl_verify_depth

The verification depth for replication SSL connections.

Ssl_verify_mode

The verification mode for replication SSL connections.

Ssl_version

The SSL version number.

Table_locks_immediate

The number of times that a request for a table lock could be granted immediately.

Table_locks_waited

The number of times that a request for a table lock could not be granted immediately and a wait was needed. If this is high and you have performance problems, you should first optimize your queries, and then either split your table or tables or use replication.

Tc_log_max_pages_used

For the memory-mapped implementation of the log that is used by mysqld when it acts as the transaction coordinator for recovery of internal XA transactions, this variable indicates the largest number of pages used for the log since the server started. If the product of Tc_log_max_pages_used and Tc_log_page_size is always significantly less than the log size, the size is larger than necessary and can be reduced. (The size is set by the --log-tc-size option. Currently, this variable is unused: It is unneeded for binary log-based recovery, and the memory-mapped recovery log method is not used unless the number of storage engines capable of two-phase commit is greater than one. (InnoDB is the only applicable engine.)

Tc_log_page_size

The page size used for the memory-mapped implementation of the XA recovery log. The default value is determined using getpagesize(). Currently, this variable is unused for the same reasons as described for Tc_log_max_pages_used.

Tc_log_page_waits

For the memory-mapped implementation of the recovery log, this variable increments each time the server was not able to commit a transaction and had to wait for a free page in the log. If this value is large, you might want to increase the log size (with the --log-tc-size option). For binary log-based recovery, this variable increments each time the binary log cannot be closed because there are two-phase commits in progress. (The close operation waits until all such transactions are finished.)

Threads_cached

The number of threads in the thread cache.

Threads_connected

The number of currently open connections.

Threads_created

The number of threads created to handle connections. If Threads_created is big, you may want to increase the thread_cache_size value. The cache miss rate can be calculated as Threads_created/Connections.

Threads_running

The number of threads that are not sleeping.

Uptime

The number of seconds that the server has been up.

Uptime_since_flush_status

The number of seconds since the most recent FLUSH STATUS statement.