% \iffalse meta-comment % %% File: GS1.dtx Copyright (C) 2012 Markus Kohm %% %% It may be distributed and/or modified under the conditions of the %% LaTeX Project Public License (LPPL), either version 1.3c of this %% license or (at your option) any later version. The latest version %% of this license is in the file %% %% http://www.latex-project.org/lppl.txt %% %% This file is part of the "GS1 bundle" (The Work in LPPL) %% and all files in that bundle must be distributed together. %% %% The released version of this bundle is available from CTAN. %% %% ------------------------------------------------------------------------- % %<*driver|package|test> \RequirePackage{expl3} \GetIdInfo$Id: GS1.dtx 15 2012-08-27 10:25:03Z mjk $ {GS1 code handler and barcode generator} % %<*driver> \documentclass{l3doc} \begin{document} \DocInput{\jobname.dtx} \end{document} % %<*test> \documentclass{article} \usepackage{GS1} \ExplSyntaxOn \msg_new:nnn { GS1/test } { function } { Something~is~wrong~with~function~#1 \msg_line_context:~~of~\c_job_name_tl.tex. } \ExplSyntaxOff \begin{document} % % \fi % % \title{^^A % The \pkg{GS1}\thanks % {^^A % GS1 is a registered trademark of GS1 AISBL. Nevertheless, GS1 AISBL % neither has any rights on this package, nor is responsible for it in % any kind. The package's name should indicate only, that the package % implements some aspects of GS1 codes.^^A % } % package\\ % GS1 Code Handler and Barcode Generator\thanks % {^^A % This file describes v\ExplFileVersion, % last revised \ExplFileDate.^^A % }^^A % } % % \author{^^A % Markus Kohm\thanks % {^^A % E-mail: \href{mailto:komascript@gmx.info}{komascript@gmx.info}^^A % }^^A % } % % \date{Released \ExplFileDate} % % \maketitle % % \begin{documentation} % \begin{abstract} % There are several barcode packages out in the world, but they either need % PStricks, or are restricted to EAN-13 barcodes. And most of all, they are % all \LaTeXe. I've decided to write a package, that supports several GS1 % codes, and at almost the same time, I've decided to give L3 a chance. So % I've started an experimental GS1 package using \pkg{expl3}. Using % \pkg{expl3} was the main reason writing this package. % \end{abstract} % % \tableofcontents % % \section*{Preface} % % Design and implementation of this package based on % \begin{quote}\begin{description} % \item[GS1:] ``Allgemeine GS1 Spezifikation'', Version~12.0, Januar~2012, % Ausgabe~1. % \end{description}\end{quote} % This is the official GS1 specification for Germany, Austria and Switzerland. % % Currently only EAN-8 and EAN-13 codes and bar codes without extension have % been implemented. Others may follow in future. % % % \section{L3 Functions and Variables for GS1 Codes} % \label{sec:doc:functions.and.variables} % % First of all: Please note, that the concept of private functions and % variables is not well defined in \TeX. Several variables, that I'd have % made private in C++, haven't been declared to be private in this % implementation. Maybe I should change this. % % You should also know, that several test files may be created from the % package source, and each of those may be used as an example for using the % code. Nevertheless, \LaTeXe{} users will not need the following functions % and should continue reading with \autoref{sec:doc:latex2e}. % % \begin{function}{\GS_set_code_digit_seq:Nn} % \begin{syntax} % "\GS_set_code_digit_seq:Nn" \meta{GS1 sequence variable} \Arg{token list} % \end{syntax} % Makes a GS1 sequence, that consist in digits only, from a \meta{token % list}. To do so, only the tokens from 0 up to 9 of the \meta{token list} % are set to the \meta{GS1 sequence variable}. All other tokens are % ignored. So may, e.g., convert the string ``ISBN 978-3-86541-459-5'' into % a GS1 sequence with the digits ``9783865414595'', where each digit is one % item of the sequence. % \end{function} % % \begin{function}{\GS_cut_EAN_control_digit:N} % \begin{syntax} % "\GS_cut_EAN_control_digit:N" \meta{GS1 sequence variable} % \end{syntax} % The \meta{GS1 sequence variable} should store either a EAN-8 or EAN-13 % code with or without control digit. If the code has seven or twelve % digits, nothing happens. If the code has eight or 13 digits, the last one % will be removed. All other cases result in an error message. % \end{function} % % \begin{function}{\int_set_to_EAN_control_digit:NN} % \begin{syntax} % "\int_set_to_EAN_control_digit:NN" \meta{integer variable} \meta{GS1 sequence variable} % \end{syntax} % Calculates the control digit of the \meta{GS1 sequence variable} using the % EAN control digit algorithm and stores it into the \meta{integer % variable}. Note, that the \meta{GS1 sequence variable} may be a sequence % of digits of any length not only seven digits for EAN-8 or twelve digits % for EAN-13. % \end{function} % % \begin{function}{\GS_use_as_EAN_barcode:N} % \begin{syntax} % "\GS_use_as_EAN_barcode:N" \meta{GS1 sequence variable} % \end{syntax} % Prints an EAN-8 or EAN-13 bar code depending on % \cs{l_GS_code_size_int}. Note, that the \meta{GS1 sequence variable} may % have more than 8 resp. 13 items but not less! Use \cs{EANBarcode} if you % need a more save function. % \end{function} % % % \section{\LaTeXe{} User Interface for GS1 Codes} % \label{sec:doc:latex2e} % % This section describes the \LaTeXe-compatible user interface. Note, that % the test files \file{EANControlDigit.tex}, \file{EANBarcode.tex}, % \file{GSSetup.tex}, and the resulting PDF files may be used as examples of % the following commands. % % \begin{function}{\EANControlDigit} % \begin{syntax} % "\EANControlDigit"\Arg{string} % \end{syntax} % Only the digits of the \meta{string} will be used. All other tokens % will be ignored. If the \meta{string} has 7 or 8 digits, the control % digit of an EAN-8 code will be calculated and output. If the % \meta{string} has 12 or 13 digits, the control digit of an EAN-13 code % will be calculated and output. If the \meta{string} has 8 or 13 digits % the last digit will be ignored. Any other number of digits will result in % an error message. % \end{function} % % \begin{function}{\EANBarcode} % \begin{syntax} % "\EANBarcode"\oarg{options}\Arg{string} % \end{syntax} % Creates the EAN bar code corresponding with \meta{string}. The optional % argument \meta{options} may be used to use different settings from the % defaults set by \cmd{\GSSetup}. % % Each digit of a EAN bar code is represented by seven modules. Each module % is either black or white. A black module is a black, vertical line. A % white module is just a gap. The seven modules start either with a black % sequence of up to four modules, followed by a white sequence of up to four % modules, followed by a black sequence of up to four modules, finished by a % white sequence of up to four modules, or they start with a white sequence % of up to four modules, followed by a black sequence of up to four modules, % followed by a white sequence of up to four modules, finished by a black % sequence of up to four modules. % \end{function} % % \begin{function}{\GSSetup} % \begin{syntax} % "\GSSetup" \Arg{options} % \end{syntax} % \meta{options} is a list of \meta{key}=\meta{value} pairs. They are used % to setup the default of several settings: % \begin{description} % \item[\texttt{ocrb=}\meta{boolean}]\hfill\\ % If \meta{boolean} is \texttt{true} the digits at the bottom of the bar % code will be printed using OCR-b font ocrb/T1/m/n in 9pt. Predefined % default is |ocrb=true|. % \item[\texttt{module\_width=}\meta{dimension expression}]\hfill\\ % This is the width of one module. GS1 specifies a minimum module width % of 0.264\,mm and a normal width of 0.33\,mm. You should not set a % width below the minimum! % \item[\texttt{module\_height=}\meta{dimension expression}]\hfill\\ % This is the height of a black module. GS1 specifies a normal bar code % height of 21.31\,mm for EAN-8 and 25.01\,mm for EAN-13. Both values % are inclusive the digits at the bottom of the bar code. Some marker % modules are higher than the digit modules. % \item[\texttt{code=}\meta{string}]\hfill\\ % The \meta{string} should either be \texttt{EAN-8} or \texttt{EAN-13}. % The predefined default is |EAN-13|. More types will be % supported in future. % \item[\texttt{scale=}\meta{floating point}]\hfill\\ % This is the scale factor for the bar code. GS1 specifies scale classes % from 0.8 up to 2.0 with steps of 0.05. Factors less than 0.8 % shouldn't be used. \emph{Currently \texttt{scale} won't be used!} % \item[\texttt{scale\_to\_font=}\meta{boolean}]\hfill\\ % Ignore \texttt{module_width} and instead set the module width % depending on the width of digit 0 of the current font. Note, that % this will not scale the whole bar code but only the module width. To % scale the whole bar code, you should use \texttt{scale}. % \item[\texttt{add\_control=}\meta{boolean}]\hfill\\ % Add the control digit to the GS1 code. If there's already a control % digit, replace it by the calculated one. The predefined default is % |add_control=false|. % \end{description} % \end{function} % % % \section{Internal Functions and Variables} % \label{sec:doc:internal} % % You should not use or manipulate these! So, maybe it's better to stop % reading now. % % \begin{function}{\__GS_set_key_code:nn} % \begin{syntax} % "\__GS_set_key_code:nn" \Arg{token list} \Arg{integer expression} % \end{syntax} % Sets \cs{l_GS_code_type_tl} to \meta{token list} and % \cs{l_GS_code_size_int} to value of \Arg{integer expression}. % \end{function} % % \begin{function}{\__GS_new_seq_c:cn} % \begin{syntax} % "\__GS_new_seq_c:cn" \Arg{sequence name} \Arg{token list} % \end{syntax} % Creates a sequence constant \cs{c__GS_\meta{sequence name}_seq}. The % value of the constant will be build by the tokens of the \meta{token % list}. These tokens should be either characters ``A'' or ``B'' for % selection constants or digits 1--4 for module constants. % \end{function} % % \begin{function}{\__GS_modules:Nn, \__GS_modules:cn, \__GS_modules:NnN} % \begin{syntax} % "\__GS_modules:Nn" \meta{sequence variable} \Arg{dimension expression} % "\__GS_modules:cn" \Arg{sequence variable name} \Arg{dimension expression} % "\__GS_modules:NnN" \meta{sequence variable} \Arg{dimension expression} \meta{boolean variable} % \end{syntax} % Draws the modules given by the \meta{sequence variable} with height % \Arg{dimension expression}. The arguments are: % \begin{arguments} % \item \meta{sequence variable} or \meta{sequence variable name}, each item % of the sequence stays for a number of modules with the same color. % \cs{l__GS_black_bool} signals, whether the (first) modules are black or % white and will be reversed after every item. Each module has the width % \cs{l_GS_module_wd_dim}. % \item \meta{dimension expression}, the height of the black modules. The % modules will be raised by \cs{l_GS_module_ht_dim}. % \item \meta{boolean variable}, \texttt{true} indicates, that the first % module should be black. With \texttt{false}, the first module will be % white. % \end{arguments} % \end{function} % % \begin{function}{\__GS_modules_start_black:Nn} % \begin{syntax} % "\__GS_modules_start_black:Nn" \meta{sequence variable} \Arg{dimension expression} % \end{syntax} % Same like \cs{__GS_modules:NnN} \meta{sequence variable} \Arg{dimension % expression} \cs{c_true_bool}. % \end{function} % % \begin{function}{\__GS_modules_start_white:Nn} % \begin{syntax} % "\__GS_modules_start_white:Nn" \meta{sequence variable} \Arg{dimension expression} % \end{syntax} % Same like \cs{__GS_modules:NnN} \meta{sequence variable} \Arg{dimension % expression} \cs{c_false_bool}. % \end{function} % % \end{documentation} % % \begin{implementation} % % \section{\pkg{GS1} implementation} % \label{sec:implementation} % \iffalse %<*package> %<@@=GS> % \fi % % The implementation has been done in two parts. The first part is the L3 % code with all the functions and variables. The second part is the % \LaTeXe{} lookalike user interface. % % But before this, we just declare, what this is: % \begin{macrocode} \ProvidesExplPackage {\ExplFileName}{\ExplFileDate}{\ExplFileVersion}{\ExplFileDescription} % \end{macrocode} % and what it requires: % \begin{macrocode} \RequirePackage{expl3}[2012/07/16] \RequirePackage{rule-D} % \end{macrocode} % % \subsection{Implementation of Functions and Variables} % \label{sec:impl:functions.and.variables} % % \subsubsection{Constants} % \label{sec:impl:constants} % % \begin{macro}{\__GS_new_seq_c:cn} % While this is an internal function, that should allow only some tokens at % the arguments, it is declared \texttt{nopar}. % \begin{macrocode} \cs_new_nopar:Npn \@@_new_seq_c:cn #1#2 { \seq_new:c {c@@_ #1 _seq} \seq_set_split:Nnn \l_tmpa_seq {} {#2} \seq_gset_eq:cN {c@@_ #1 _seq} \l_tmpa_seq } % \end{macrocode} % \end{macro} % % \begin{variable}{\c__GS_AB0_seq, \c__GS_AB1_seq, \c__GS_AB2_seq, % \c__GS_AB3_seq, \c__GS_AB4_seq, \c__GS_AB5_seq, \c__GS_AB6_seq, % \c__GS_AB7_seq, \c__GS_AB8_seq, \c__GS_AB9_seq} % These constants represent the generation rules of the left side of an EAN-13 % barcode. See figure~5.2.1.3.1-1 of the GS1 specification. % \begin{macrocode} \@@_new_seq_c:cn {AB0} {AAAAAA} \@@_new_seq_c:cn {AB1} {AABABB} \@@_new_seq_c:cn {AB2} {AABBAB} \@@_new_seq_c:cn {AB3} {AABBBA} \@@_new_seq_c:cn {AB4} {ABAABB} \@@_new_seq_c:cn {AB5} {ABBAAB} \@@_new_seq_c:cn {AB6} {ABBBAA} \@@_new_seq_c:cn {AB7} {ABABAB} \@@_new_seq_c:cn {AB8} {ABABBA} \@@_new_seq_c:cn {AB9} {ABBABA} % \end{macrocode} % \end{variable} % % \begin{variable}{\c__GS_A0_seq, \c__GS_A1_seq, \c__GS_A2_seq, \c__GS_A3_seq, % \c__GS_A4_seq, \c__GS_A5_seq, \c__GS_A6_seq, \c__GS_A7_seq, \c__GS_A8_seq, % \c__GS_A9_seq, \c__GS_B0_seq, \c__GS_B1_seq, \c__GS_B2_seq, \c__GS_B3_seq, % \c__GS_B4_seq, \c__GS_B5_seq, \c__GS_B6_seq, \c__GS_B7_seq, \c__GS_B8_seq, % \c__GS_B9_seq, \c__GS_margin_seq, \c__GS_separator_seq, \c__GS_special_seq, % \c__GS_extra_margin_seq, \c__GS_extra_separator_seq} % These constants represent the module sequences of digits and markers. See % figure~5.2.1.2.1-1 and 5.2.1.2.2-1 of the GS1 specification. Note, that % the module sequences of type C are same like type A but start with a black % module instead of a white one. % \begin{macrocode} \@@_new_seq_c:cn {A0} {3211} % start white (C0 same but start with black) \@@_new_seq_c:cn {A1} {2221} \@@_new_seq_c:cn {A2} {2122} \@@_new_seq_c:cn {A3} {1411} \@@_new_seq_c:cn {A4} {1132} \@@_new_seq_c:cn {A5} {1231} \@@_new_seq_c:cn {A6} {1114} \@@_new_seq_c:cn {A7} {1312} \@@_new_seq_c:cn {A8} {1213} \@@_new_seq_c:cn {A9} {3112} \@@_new_seq_c:cn {B0} {1123} % start white \@@_new_seq_c:cn {B1} {1222} \@@_new_seq_c:cn {B2} {2212} \@@_new_seq_c:cn {B3} {1141} \@@_new_seq_c:cn {B4} {2311} \@@_new_seq_c:cn {B5} {1321} \@@_new_seq_c:cn {B6} {4111} \@@_new_seq_c:cn {B7} {2131} \@@_new_seq_c:cn {B8} {3121} \@@_new_seq_c:cn {B9} {2113} \@@_new_seq_c:cn {margin} {111} % start black \@@_new_seq_c:cn {separator} {11111} % start white \@@_new_seq_c:cn {special} {111111} % start white \@@_new_seq_c:cn {extra_margin} {112} % start black \@@_new_seq_c:cn {extra_separator} {11} % start white % \end{macrocode} % \end{variable} % % There are some basic dimensions for the modules at the specification: % \begin{variable}{\c__GS_module_min_width_dim, \c__GS_module_norm_width_dim} % \begin{macrocode} \dim_const:Nn \c_@@_module_min_width_dim {0.264mm} \dim_const:Nn \c_@@_module_norm_width_dim {0.33mm} % \end{macrocode} % \end{variable} % % \subsubsection{Settings and Variables} % \label{seq:impl.settings} % % These settings will influence the work of several of the user functions. % They are defined as keys of family \texttt{GS1}. % % \begin{macro}{ \l_GS_use_ocrb_bool, \l_GS_module_wd_dim, % \l_GS_module_ht_dim, \l_GS_scale_fp, \l_GS_scale_to_font_bool, % \l_GS_add_control_bool, \l_GS_code_type_tl, l_GS_code_size_int } % \begin{macro}{\__GS_set_key_code:nn} % Needed to set both \cmd{\l_GS_code_type_tl} and \cmd{\l_GS_code_size_int} % with one key. Together they are the type of code, to be handled. % \begin{macrocode} \cs_new_nopar:Npn \@@_set_key_code:nn #1#2 { \tl_if_exist:NF \l_GS_code_type_tl { \tl_new:N \l_GS_code_type_tl } \tl_set:Nn \l_GS_code_type_tl { #1 } \int_if_exist:NF \l_GS_code_size_int { \int_new:N \l_GS_code_size_int } \int_set:Nn \l_GS_code_size_int { #2 } } % \end{macrocode} % \end{macro} % \begin{macrocode} \keys_define:nn { GS1 } { ocrb .bool_set:N = \l_GS_use_ocrb_bool, ocrb .initial:n = true, module_width .dim_set:N = \l_GS_module_wd_dim, module_width .initial:V = \c_@@_module_norm_width_dim, module_height .dim_set:N = \l_GS_module_ht_dim, module_height .initial:V = \c_zero_dim, code .choice:, code / EAN-8 .code:n = { \@@_set_key_code:nn { EAN } { 8 } }, code / EAN8 .code:n = { \@@_set_key_code:nn { EAN } { 8 } }, code / EAN-13 .code:n = { \@@_set_key_code:nn { EAN } { 13 } }, code / EAN13 .code:n = { \@@_set_key_code:nn { EAN } { 13 } }, code .initial:n = EAN-13, scale .fp_set:N = \l_GS_scale_fp, scale .initial:n = 1.0, scale_to_font .bool_set:N = \l_GS_scale_to_font_bool, scale_to_font .initial:n = false, add_control .bool_set:N = \l_GS_add_control_bool, add_control .initial:n = false, } % \end{macrocode} % \end{macro} % % Note: Later I'll define a \LaTeXe{} command to change the defaults of those % keys. Additionally local changes of those keys may be done using the % optional argument of the \LaTeXe{} user commands. See % \autoref{sec:impl:user.interface} for more information. % % \begin{variable}{\l__GS_code_seq} % This will be used later for several local GS1 sequences. It is private % and also shouldn't be used in global context. % \begin{macrocode} \seq_new:N \l_@@_code_seq % \end{macrocode} % \end{variable} % % \subsubsection{Messages} % \label{seq:impl.messages} % % \begin{macrocode} \msg_new:nnnn { GS1 } { EAN-code-size } { #1~isn't~a~valid~EAN~code~\msg_line_context:. } { The~given~code~is~neither~a~EAN-8~with~or~without~control~digit,\\ nor~a~EAN-13~with~or~without~control~digit.\\\\ The~GS1~module~currently~only~supports~EAN-8~and~EAN~13. } \msg_new:nnn { GS1 } { module/minwidth } { Resulting~module~width~is~less~than~allowed~minimum~\msg_line_context:.\\\\ GS1~specification~declares~a~minimum~module~width~of~#2.\\ Currently~the~module~with~would~be~#1.\\ To~avoid~problems,~I'll~increase~module~width~to~#2. } % \end{macrocode} % % \subsubsection{Functions} % \label{seq:impl.functions} % % \begin{macro}{\GS_set_code_digit_seq:Nn} % Convert a string into a code sequence ignoring all but digits. % \begin{macrocode} \cs_new_nopar:Npn \GS_set_code_digit_seq:Nn #1#2 { \seq_set_eq:NN #1 \c_empty_seq \tl_map_inline:nn { #2 } { \tl_if_in:nnT {0123456789} {##1} { \seq_put_right:Nn #1 { ##1 } } } } % \end{macrocode} % % \TestFiles{GS_set_code_digit.tex}\UnitTested % \iffalse meta-comment % %<*test&GS.set.code.digit.seq> % \begin{macrocode} \ExplSyntaxOn \seq_new:N \l_testa_seq \seq_new:N \l_testb_seq \GS_set_code_digit_seq:Nn \l_testa_seq {ISBN 978-3-86541-459-5} Sequence~for~ISBN~978-3-86541-459-5~is:~ \seq_use:Nnnn \l_testa_seq { ,~ } { ,~} { ,~ } \GS_set_code_digit_seq:Nn \l_testb_seq {9783865414595} \seq_map_inline:Nn \l_testa_seq { \seq_pop_left:NN \l_testb_seq \l_tmpa_tl \tl_set:Nn \l_tmpb_tl { #1 } \tl_if_eq:NNF \l_tmpa_tl \l_tmpb_tl { \tl_show:N l_testa_seq \tl_show:N l_testb_seq \msg_fatal:nnn { GS1/test } { function } { \GS_set_code_digit_seq:Nn } } } \GS_set_code_digit_seq:Nn \l_testa_seq {ISBN 978-3-86541-459-5} \seq_set_split:Nnn \l_testb_seq {,} {9,7,8,3,8,6,5,4,1,4,5,9,5} \seq_map_inline:Nn \l_testa_seq { \seq_pop_left:NN \l_testb_seq \l_tmpa_tl \tl_set:Nn \l_tmpb_tl { #1 } \tl_if_eq:NNF \l_tmpa_tl \l_tmpb_tl { \tl_show:N \l_testa_seq \tl_show:N \l_testb_seq \msg_fatal:nnn { GS1/test } { function } { \GS_set_code_digit_seq:Nn } } } \ExplSyntaxOff % \end{macrocode} % %<*package> % \fi % \end{macro} % % \begin{macro}{\GS_cut_EAN_control_digit:N} % EAN code sequences with control digit are either 8 or 13 digits. To % remove the control digit we just have to remove the right most digit from % a 8 or 13 digits sequence. 7 or 12 digit sequences are already without % control digit. All other sequences are not supported. % \begin{macrocode} \cs_new_nopar:Npn \GS_cut_EAN_control_digit:N #1 { \int_case:nnn { \seq_count:N #1 } { { 7 } { } { 8 } { \seq_pop_right:NN #1 \l_tempa_tl } { 12 } { } { 13 } { \seq_pop_right:NN #1 \l_tempa_tl } } { \msg_error:nnn { GS1 } { EAN-code-size } { #1 } } } % \end{macrocode} % \TestFiles{GS_cut_EAN_control_digit.tex}\UnitTested % % \iffalse meta-comment % %<*test&GS.cut.EAN.control.digit> % \begin{macrocode} \raggedright \ExplSyntaxOn \seq_new:N \l_testa_seq \GS_set_code_digit_seq:Nn \l_testa_seq {ISBN 978-3-86541-459-5} With~control:~\seq_use:Nnnn \l_testa_seq { ,~ } { ,~} { ,~ }\\ \GS_set_code_digit_seq:Nn \l_testb_seq {ISBN 978-3-86541-459} \GS_cut_EAN_control_digit:N \l_testa_seq \seq_map_inline:Nn \l_testa_seq { \seq_pop_left:NN \l_testb_seq \l_tmpa_tl \tl_set:Nn \l_tmpb_tl { #1 } \tl_if_eq:NNF \l_tmpa_tl \l_tmpb_tl { \tl_show:N \l_testa_seq \tl_show:N \l_testb_seq \msg_fatal:nnn { GS1/test } { function } { \GS_cut_EAN_control_digit:N } } } Without~control:~\seq_use:Nnnn \l_testa_seq { ,~ } { ,~} { ,~ }\\ \ExplSyntaxOff % \end{macrocode} % %<*package> % \fi % \end{macro} % % \begin{macro}{\int_set_to_EAN_control_digit:NN} % Sets an integer to the control digit calculated with the EAN control digit % algorithm for a given code sequence. Note, that the complete code % sequence will be used to calculate the control digit. So, if you have a % EAN-8 or EAN-13 code sequence, you should cut of the control digit first. % \begin{macrocode} \cs_new_nopar:Npn \int_set_to_EAN_control_digit:NN #1#2 { \int_zero:N #1 \seq_set_eq:NN \l_tmpa_seq #2 \bool_until_do:nn { \seq_if_empty_p:N \l_tmpa_seq } { \seq_pop_left:NN \l_tmpa_seq \l_tmpb_tl \int_if_even:nTF { \seq_count:N \l_tmpa_seq } { \int_add:Nn #1 { 3 * \l_tmpb_tl } } { \int_add:Nn #1 { \l_tmpb_tl } } } \int_set:Nn #1 { \int_mod:nn { 10 - \int_mod:nn { #1 } { 10 } } { 10 } } } % \end{macrocode} % \TestFiles{int_set_to_EAN_control_digit.tex}\UnitTested % % \iffalse meta-comment % %<*test&int.set.to.EAN.control.digit> % \begin{macrocode} \ExplSyntaxOn \seq_new:N \l_testa_seq \tl_new:N \l_control_tl \GS_set_code_digit_seq:Nn \l_testa_seq {ISBN 978-3-86541-459-5} \seq_pop_right:NN \l_testa_seq \l_control_tl \int_new:N \l_control_int \int_set_to_EAN_control_digit:NN \l_control_int \l_testa_seq Control~digit~should~be~\tl_use:N \l_control_tl{} ~ \int_compare:nNnTF { \l_control_tl } { = } { \l_control_int } { ~and~is~\int_use:N \l_control_int . } { ~but~it~\int_use:N \l_control_int . \msg_error:nnn { GS1/test } { function } { \int_set_to_EAN_control_digit:NN } } \ExplSyntaxOff % \end{macrocode} % %<*package> % \fi % \end{macro} % % \begin{macro}{\GS_set_EAN_control_digit:N} % Add a new control digit to a EAN sequence % \begin{macrocode} \cs_new_nopar:Npn \GS_set_EAN_control_digit:N #1 { \GS_cut_EAN_control_digit:N #1 \int_set_to_EAN_control_digit:NN \l_tmpa_int #1 \seq_put_right:NV #1 \l_tmpa_int } % \end{macrocode} % \TestFiles{GS_set_EAN_control_digit.tex}\UnitTested % % \iffalse meta-comment % %<*test&GS.set.EAN.control.digit> % \begin{macrocode} \ExplSyntaxOn \seq_new:N \l_testa_seq \GS_set_code_digit_seq:Nn \l_testa_seq {ISBN 978-3-86541-459-5} \seq_new:N \l_testb_tl \seq_pop_right:NN \l_testa_seq \l_testb_tl \GS_set_EAN_control_digit:N \l_testa_seq \tl_new:N \l_testa_tl \seq_get_right:NN \l_testa_seq \l_testa_tl Control~digit~should~be~ \tl_use:N \l_testb_tl {} ~ \int_compare:nNnTF { \l_testa_tl } { = } { \l_testb_tl } { ~and~is~\tl_use:N \l_testa_tl . } { ~but~it~\tl_use:N \t_testa_tl . \msg_error:nnn { GS1/test } { function } { \GS_set_EAN_control_digit:N } } \ExplSyntaxOff % \end{macrocode} % %<*package> % \fi % \end{macro} % % \begin{macro}{\__GS_modules:Nn, \__GS_modules:NnN, % \__GS_modules_start_black:Nn, \__GS_modules_start_white:Nn} % \begin{macrocode} \cs_new_nopar:Npn \@@_modules:Nn #1#2 { \seq_map_inline:Nn #1 { \bool_if:NTF \l_@@_black_bool { \bool_set_false:N \l_@@_black_bool \hbox_set:Nn \l_tmpa_box { 0 } \rule:nnn { \dim_eval:n { \box_ht:N \l_tmpa_box + \l_GS_module_wd_dim / 2 - \dim_eval:n { #2 } + \l_GS_module_ht_dim } } { \dim_eval:n { \l_GS_module_wd_dim * ##1 } } { \dim_eval:n { #2 } } } { \bool_set_true:N \l_@@_black_bool \hbox_to_wd:nn { \l_GS_module_wd_dim * ##1 } { } } } } \cs_new_nopar:Npn \@@_modules:NnN #1#2#3 { \bool_if_exist:NF \l_@@_black_bool { \bool_new:N \l_@@_black_bool } \bool_set_eq:NN \l_@@_black_bool #3 \@@_modules:Nn #1 { #2 } } \cs_new_nopar:Npn \@@_modules_start_black:Nn #1#2 { \@@_modules:NnN #1 { #2 } \c_true_bool } \cs_new_nopar:Npn \@@_modules_start_white:Nn #1#2 { \@@_modules:NnN #1 { #2 } \c_false_bool } \cs_generate_variant:Nn \@@_modules:Nn { c } % \end{macrocode} % \TestFiles{EANBarcode.tex}\UnitTested % \end{macro} % % \begin{macro}{\GS_use_as_EAN_barcode:N} % Puts the digits, rules, and gaps for an EAN barcode into the input % stream. % \begin{macrocode} \cs_new_nopar:Npn \GS_use_as_EAN_barcode:N #1 { \seq_set_eq:NN \l_@@_code_seq #1 \int_compare:nNnTF { \l_GS_code_size_int } { = } { 8 } { \hbox_to_wd:nn { \l_GS_module_wd_dim * 7 } { } \seq_set_eq:Nc \l_GS_system_seq { c_@@_AB0_seq } } { \hbox_to_wd:nn { \l_GS_module_wd_dim * 11 } { } \seq_pop_left:NN \l_@@_code_seq \l_tmpa_tl \seq_set_eq:Nc \l_GS_system_seq { c_@@_AB \l_tmpa_tl _seq } \hbox_overlap_left:n { \l_tmpa_tl } } \@@_modules_start_black:Nn \c_@@_margin_seq { \l_GS_module_ht_dim + \l_GS_module_wd_dim * 5 } \int_step_inline:nnnn { 1 } { 1 } { \int_div_truncate:nn { \l_GS_code_size_int } { 2 } } { \seq_pop_left:NN \l_@@_code_seq \l_tmpa_tl \hbox_overlap_right:n { \l_tmpa_tl } \seq_pop_left:NN \l_GS_system_seq \l_tmpb_tl \@@_modules:cn { c_@@_ \l_tmpb_tl \l_tmpa_tl _seq } { \l_GS_module_ht_dim } } \@@_modules_start_white:Nn \c_@@_separator_seq { \l_GS_module_ht_dim + \l_GS_module_wd_dim * 5 } \int_step_inline:nnnn { 1 } { 1 } { \int_div_truncate:nn { \l_GS_code_size_int } { 2 } } { \seq_pop_left:NN \l_@@_code_seq \l_tmpa_tl \hbox_overlap_right:n { \l_tmpa_tl } \@@_modules:cn { c_@@_A \l_tmpa_tl _seq } { \l_GS_module_ht_dim } } \@@_modules_start_black:Nn \c__GS_margin_seq { \l_GS_module_ht_dim + \l_GS_module_wd_dim * 5 } \hbox_to_wd:nn { \l_GS_module_wd_dim * 7 } { } } % \end{macrocode} % \TestFiles{EANBarcode.tex}\UnitTested % \end{macro} % % % \subsection{Implementation of the User Interface} % \label{sec:impl:user.interface} % % For this, additional packages are needed: % \begin{macrocode} \RequirePackage{xparse} % \end{macrocode} % % \begin{macro}{\EANControlDigit} % \begin{macrocode} \NewDocumentCommand \EANControlDigit { m } { \group_begin: \GS_set_code_digit_seq:Nn \l_@@_code_seq { #1 } \GS_cut_EAN_control_digit:N \l_@@_code_seq \int_set_to_EAN_control_digit:NN \l_tmpa_int \l_@@_code_seq \int_to_arabic:n { \l_tmpa_int } \group_end: } % \end{macrocode} % \TestFiles{EANControlDigit.tex}\UnitTested % % \iffalse meta-comment % %<*test&EANControlDigit> % \begin{macrocode} \begin{tabular}{ll} \hline Calculated & Known \\ \hline 501234567890-\EANControlDigit{501234567890} & 501234567890-0 \\ ISBN 978-3-86541-459-\EANControlDigit{ISBN 978-3-86541-459} & ISBN 978-3-86541-459-5 \\ EAN-8: 2012345\EANControlDigit{2012345} & EAN-8: 20123451 \\ \hline \end{tabular} % \end{macrocode} % %<*package> % \fi % \end{macro} % % \begin{macro}{\EANBarcode} % \begin{macrocode} \NewDocumentCommand \EANBarcode { o m } { \group_begin: \IfNoValueF{#1}{ \keys_set:nn { GS1 } { #1 } } \dim_compare:nNnT { \l_GS_module_ht_dim } { = } { \c_zero_dim } { \int_compare:nNnTF { \l_GS_code_size_int } { = } { 8 } { \dim_set:Nn \l_GS_module_ht_dim { 21.31 mm } } { \dim_set:Nn \l_GS_module_ht_dim { 25.01 mm } } } \bool_if:nT \l_GS_use_ocrb_bool { % \end{macrocode} % \textsc{ToDo:} Use \pkg{fontspec} if available. % \begin{macrocode} \usefont{OT1}{ocrb}{m}{n}\fontsize{9}{9}\selectfont } \GS_set_code_digit_seq:Nn \l_@@_code_seq { #2 } \bool_if:NT \l_GS_add_control_bool { \GS_set_EAN_control_digit:N \l_@@_code_seq } \int_compare:nNnT { \seq_count:N \l__GS_code_seq } { > } { \l_GS_code_size_int } { \msg_error:nnn { GS1 } { EAN-code-size } { #2 } } \int_while_do:nNnn { \seq_count:N \l_@@_code_seq } { < } { \l_GS_code_size_int } { \seq_put_left:Nn \l_@@_code_seq { 0 } } \bool_if:NT \l_GS_scale_to_font_bool { \hbox_set:Nn \l_tmpa_box { 0 } \dim_set:Nn \l_GS_module_wd_dim { \box_wd:N \l_tmpa_box / 7 } } \dim_set:Nn \l_tmpa_dim { \fp_to_decimal:N \l_GS_scale_fp \l_GS_module_wd_dim } \dim_compare:nNnT { \l_tmpa_dim } { < } { \c_@@_module_min_width_dim } { \msg_warning:nnxx { GS1 } { module/minwidth } { \dim_use:N \l_GS_module_wd_dim } { \dim_use:N \c_@@_module_min_width_dim } \dim_set:Nn \l_GS_module_wd_dim { \c_@@_module_min_width_dim * 100 / \fp_to_int:n { 100 * \l_GS_scale_fp } } } \hbox_set:Nn \l_tmpa_box { \GS_use_as_EAN_barcode:N \l_@@_code_seq } \box_scale:Nnn \l_tmpa_box { \fp_to_int:n { 100 * \l_GS_scale_fp } / 100 } { \fp_to_int:n { 100 * \l_GS_scale_fp } / 100 } \box_use:N \l_tmpa_box \group_end: } % \end{macrocode} % \TestFiles{EANBarcode.tex}\UnitTested % % \iffalse meta-comment % %<*test&EANBarcode|GSSetup> % \begin{macrocode} \raggedright \verb|\EANBarcode{ISBN 978-3-86541-459-5}|: \EANBarcode{ISBN 978-3-86541-459-5} \verb|\EANBarcode[add_control]{ISBN 978-3-86541-459-}|: \EANBarcode[add_control]{ISBN 978-3-86541-459-} \verb|\EANBarcode[ocrb=false]{ISBN 978-3-86541-459-5}|: \EANBarcode[ocrb=false]{ISBN 978-3-86541-459-5} \verb|\EANBarcode[code=EAN-8]{20123451}|: \EANBarcode[code=EAN-8]{20123451} \verb|\EANBarcode[code=EAN-8,ocrb=false,add_control]{2012345}|: \EANBarcode[code=EAN-8,ocrb=false,add_control]{2012345} % \end{macrocode} % %<*package> % \fi % \end{macro} % % \begin{macro}{\GSSetup} % \begin{macrocode} \NewDocumentCommand \GSSetup { m } { \keys_set:nn { GS1 } { #1 } } % \end{macrocode} % \TestFiles{GSSetup.tex}\UnitTested % % \iffalse meta-comment % %<*test&GSSetup> % \begin{macrocode} After \verb|\GSSetup{ocrb=false,add_control}|: \GSSetup{ocrb=false,add_control} \verb|\EANBarcode[code=EAN-8]{2012345}|: \EANBarcode[code=EAN-8]{2012345} \verb|\EANBarcode[code=EAN-8,ocrb,add_control=false]{20123451}|: \EANBarcode[code=EAN-8,ocrb,add_control=false]{20123451} % %<*package> % \fi % \end{macro} % % % \iffalse % %<*test> % \begin{macrocode} \end{document} % \end{macrocode} % % \fi % \end{implementation} % % \PrintIndex % \endinput % % end of file