%%% ====================================================================
%%%  @LaTeX-doc-source-file{
%%%     filename        = "snapshot.dtx",
%%%     version         = "1.14",
%%%     date            = "2002/03/05",
%%%     time            = "15:29:00 EST",
%%%     checksum        = "39090 807 3449 29761",
%%%     author          = "American Mathematical Society",
%%%     copyright       = "Copyright 2001 American Mathematical Society,
%%%                        all rights reserved.  Copying of this file is
%%%                        authorized only if either:
%%%                        (1) you make absolutely no changes to your copy,
%%%                        including name; OR
%%%                        (2) if you do make changes, you first rename it
%%%                        to some other name.",
%%%     address         = "American Mathematical Society,
%%%                        Electronic Products and Services,
%%%                        PO Box 6248,
%%%                        Providence, RI 02940,
%%%                        USA",
%%%     email           = "tech-support@ams.org",
%%%     URL             = "http://www.ams.org/",
%%%     supported       = "yes",
%%%     keywords        = "version, compatibility, dependencies, LaTeX",
%%%     abstract        = "This package provides a way for a LaTeX
%%%                        document to specify, for each external file
%%%                        on which the document depends, which version
%%%                        is required to guarantee output fidelity.",
%%%     docstring       = "The checksum field above contains a CRC-16
%%%                        checksum as the first value, followed by the
%%%                        equivalent of the standard UNIX wc (word
%%%                        count) utility output of lines, words, and
%%%                        characters.  This is produced by Robert
%%%                        Solovay's checksum utility.",
%%%  }
%%% ====================================================================
% \iffalse
%<*driver>
\NeedsTeXFormat{LaTeX2e}
\documentclass{amsdtx}
\providecommand{\qq}[1]{\textquotedblleft#1\textquotedblright}
\providecommand{\mdash}{\textemdash}
\begin{document}
\title{The \pkg{snapshot} package}
\author{American Mathematical Society\\Michael Downes}
\date{Version \fileversion, \filedate}
\hDocInput{snapshot.dtx}
\end{document}
%</driver>
% \fi
%
% \MakeShortVerb{\|}
%
% \maketitle
% \section{Introduction}
%
%    The \pkg{snapshot} package helps the owner of a \LaTeX{} document
%    obtain a list of the external dependencies of the document, in a
%    form that can be embedded at the top of the document. To put it
%    another way, it provides a snapshot of the current processing
%    context of the document, insofar as it can be determined from
%    inside \LaTeX{}.
%
%    If a document contains such a dependency list, then it becomes
%    possible to arrange that the document be processed always with the
%    same versions of everything, in order to ensure the same output.
%    This could be useful for someone wanting to keep a \LaTeX{}
%    document on hand and consistently reproduce an identical DVI file
%    from it, on the fly; or for someone wanting to shield a document
%    during the final stages of its production cycle from unexpected
%    side effects of routine upgrades to the \TeX{} system.
%
%    Normal usage of the \pkg{snapshot} package involves the following
%    steps:
% \begin{enumerate}
%    \item Add a \cn{RequirePackage} statement at the top of the
%    document:
% \begin{verbatim}
%      \RequirePackage{snapshot}
%      \documentclass{article}
%        ...
% \end{verbatim}
%
%    \item Run \latex/ on the document. This will produce a dependency
%    list in a file \verb'\jobname.dep'.
%
%    \item Insert the \fn{.dep} file at the top of the document, before
%    \cn{documentclass}. The following example shows what you would end
%    up with for a document that used the article documentclass and the
%    graphicx package:
% \begin{verbatim}
%  \RequirePackage{snapshot}[1999/11/03]
%  \RequireVersions{
%    *{application}{TeX}     {1990/03/25 v3.x}
%    *{format} {LaTeX2e}     {1999/06/01 v2.e}
%    *{package}{snapshot}    {1999/11/03 v1.03}
%    *{class}  {article}     {1999/01/07 v1.4a}
%    *{file}   {size10.clo}  {1999/01/07 v1.4a}
%    *{package}{graphicx}    {1999/02/16 v1.0f}
%    *{package}{keyval}      {1999/03/16 v1.13}
%    *{package}{graphics}    {1999/02/16 v1.0l}
%    *{package}{trig}        {1999/03/16 v1.09}
%    *{file}   {graphics.cfg}{0000/00/00 v0.0}
%    *{file}   {dvips.def}   {1999/02/16 v3.0i}
%  }
%  \documentclass{article}
%  \usepackage{graphicx}
%  ...
% \end{verbatim}
% \end{enumerate}
%
%    The package option \opt{log} will cause the dependency list to
%    appear in the \latex/ log file instead of in a separate \fn{.dep}
%    file:
% \begin{verbatim}
% \RequirePackage[log]{snapshot}
% \end{verbatim}
%
%    Making the necessary arrangements to ensure that future \latex/
%    runs of the document actually call in the specified versions is a
%    separate problem. The \pkg{snapshot} package only provides a way to
%    generate the dependency list. However, the \cn{RequireVersions}
%    statement does record the given information in a form that can be
%    accessed from within \latex/. (It is for this purpose that it is not
%    simply a comment.) In principle a package could be set up so that a
%    later version would automatically attempt to emulate an earlier
%    version if an earlier version was specified\mdash much as \latex/
%    currently switches to 2.09 compatibility mode if it sees
%    \cn{documentstyle} instead of \cn{documentclass}.
%
%    For maximum reliability font checksums should also be reported in
%    the dependency list, but standard \tex/ 3.x does not provide direct
%    access to font checksums for macro programmers. This information
%    could be added by a separate script that scans the DVI file.
%
%    When a graphics file is read in by a \latex/ document using the
%    standard \cn{includegraphics} command, it gets a dummy version
%    number string of
%\begin{verbatim}
%Graphics file (type foo)
%\end{verbatim}
%    where foo is typically \texttt{eps}. This is with the current
%    version of the \pkg{graphics} package (at the time of this writing:
%    1999/02/16 v1.0l). What this means in practice is that all graphics
%    files will have their snapshot date and version number recorded as
%\begin{verbatim}
%Graphics v0.0
%\end{verbatim}
%    and will always compare equal (the string ``Graphics'' will be used
%    in place of a date, but since comparison is done with \cs{ifx} it
%    doesn't make any real difference).
%
%    It would be possible, for \fn{.eps} files at least, to read the
%    CreationDate comment that is normally included in the file header
%    and use that as the basis of comparison. Recording the bounding box
%    numbers instead of a dummy version number would also be a possibly
%    useful stratagem. But I have left these possibilities untouched for
%    the time being [mjd,2001-05-14].
%
% \DescribeMacro{\RequireVersions} The \cn{RequireVersions} command
%    scans its argument for file names and associated version number
%    information. The syntax of a version line for a particular file is
% \begin{quote}
% \verb'*{' \emph{file type} \verb'}{' \emph{file name} \verb'}{'
%    \emph{version info} \verb'}'
% \end{quote}
%    In other words, the \verb'*' character in this context is like a
%    command that takes three arguments. The extension part of the
%    file name should be omitted in the second argument, except when the
%    file type is \fn{file} (following the conventions of \latex/'s
%    \cn{ProvidesPackage} and \cn{ProvidesFile} commands). The most
%    commonly used file types are as follows.
% \begin{description}
% \item[class] A \latex/ documentclass file.
% \item[package] A \latex/ package file.
% \item[tfm] A \tex/ font metric file. In this case the \qq{version
%    number} is the checksum, and unless you are using an extended
%    version of \tex/ this information is not accessible from inside
%    \latex/, so it must be filled in by an outside process.
%    By default, font metric files are not listed in the dependency list
%    since the checksum info is not available. There is a package option
%    \opt{tfm} to turn on the logging of metric files. (Not yet
%    implemented [mjd,1999/09/23])
%
% \item[format] This is almost always \fn{LaTeX2e}. Other possibilities
%    would be \fn{elatex} or \fn{lambda}. The information comes from
%    \cs{fmtname}.
% \item[application] This is usually \fn{TeX} with version number
%    \fn{3.x}. From inside \latex/ there is no reliable way to get the
%    exact version number (one could check to see if version 2.x is in
%    use, but this is unlikely to be relevant, nowadays, so I have not
%    bothered).
% \item[file] None of the above: some other file of miscellaneous type,
%    e.g., \fn{.clo}, \fn{.cfg}, \fn{.tex}, or \fn{.def}.
% \end{description}
%
%    The \cn{RequireVersions} command can be given an optional
%    \qq{ident} argument, similar to the argument of a \cn{label}
%    command. This is not used internally but it could be used to
%    assign a label to particular groups of files in case that helps
%    with external processing.
%
% \section{Warning and error options}
%
%    If the \pkg{snapshot} package is invoked with the \opt{error}
%    option \emph{and also} the document contains a \cn{RequireVersions}
%    statement, then each subsequent \cn{ProvidesFile},
%    \cn{ProvidesPackage}, and \cn{ProvidesClass} statement will compare
%    date and version number information with the corresponding
%    information from the \cn{RequireVersions} statement and give an
%    error message if a mismatch is detected. With the \opt{warning}
%    option you get warnings instead of errors. By default both the date
%    and the version number are compared; this behavior can be modified,
%    however, by giving additional options:
% \begin{description}
%   \item[date] compare only dates,
%   \item[version] compare only version numbers,
%   \item[major-version] use only the major version number when
%    comparing.
% \end{description}
%
%    \textbf{Note:} A file that doesn't have any sort of
%    \cn{ProvidesFile} or \cn{ProvidesPackage} statement in it will show
%    up in the dependency list, with a dummy date and version number of
%    0000/00/00 v0.0, but there is no way, of course, to give any
%    meaningful warning or error message about version mismatches for
%    such a file.
%
% \StopEventually{}
%
% \section{Implementation}
%    Standard declaration of package name and date.
%    \begin{macrocode}
\NeedsTeXFormat{LaTeX2e}[1994/12/01]
\ProvidesPackage{snapshot}[2002/03/05 v1.14]
%    \end{macrocode}
%
%    \begin{macrocode}
\let\@xp\expandafter \let\@nx\noexpand
%    \end{macrocode}
%
%    Calling the \pkg{snapshot} package in a document causes \latex/ to
%    list the file names and versions in the \tex/ log or in a \fn{.dep}
%    file, so that the information may be easily copied into the
%    document file. The list so generated is nothing more than a slight
%    adaptation of the output from \latex/'s \cn{listfiles} command; it
%    puts essentially the same information into a slightly more
%    structured form so that it will be easier to use.
%
%    For the standard mechanisms that are already built into \latex/
%    (e.g., the handling of the second optional argument of
%    \cs{LoadClass}), the de facto \qq{version number} is the
%    \emph{date} given in the optional argument of a \cn{ProvidesClass}
%    or similar command. Even though most \cn{ProvidesWhatever} commands
%    also give something that follows the usual form of version
%    numbers\mdash a string of the form \verb'v2.3'\mdash this is only a
%    convention, not used internally by \latex/, and the identification
%    string of a random loaded file is not guaranteed to include it. The
%    \pkg{snapshot} package copies both pieces of information if
%    available; if the second piece is not present, a dummy number
%    \verb'0.0' is supplied. Similarly, files that don't include any
%    \cn{ProvidesWhatever} statement will get a dummy date of
%    \verb'0000/00/00'; \tex/ system administrators who want to ensure
%    maximal accuracy of the snapshot information should therefore make
%    it a practice to use \cn{ProvidesFile} in \fn{.cfg} files and other
%    local files that might have an impact on the output fidelity of
%    their documents.
%
%  \begin{macro}{\RequireVersions}
%
%    Optional argument of \cn{RequireVersions} allows assigning a name to a
%    particular collection of files. This might be useful for setting a
%    \tex/ inputs path.
%    \begin{macrocode}
\newcommand{\RequireVersions}[2][]{%
  \let\snap@check\snap@compare@versions
  \let\snap@selfcheck\snap@selfcheck@a
  \@ifnextchar *\snap@store@version\snap@store@error#2*{end}{}{}%
}
\@onlypreamble\RequireVersions
%    \end{macrocode}
%
%    \begin{macrocode}
\def\snap@store@error#1{%
  \PackageError{snapshot}{Expected '*' here, not '#1'}\@ehc
}
\@onlypreamble\snap@store@error
%    \end{macrocode}
%
%    \begin{macrocode}
\def\snap@store@version #1#2#3#4{%
  \@xp\snap@store@b\csname snapx@#2\endcsname{#2}{#3}{#4}%
}
\@onlypreamble\snap@store@version
%    \end{macrocode}
%
%    \begin{macrocode}
\def\@fmtextension{fmt}
\def\@tfmextension{tfm}
\edef\snapx@package{.\@pkgextension}
\edef\snapx@class{.\@clsextension}
\edef\snapx@format{.\@fmtextension}
\edef\snapx@tfm{.\@tfmextension}
\long\def\snapx@application{}
\let\snap@file=\@empty
\let\snapx@end\@@end
%    \end{macrocode}
%
%    For a package named \fn{foo.sty}, this function defines
%    \cs{rqv@foo.sty} to hold the date and version information.
%    \begin{macrocode}
\def\snap@store@b#1#2#3#4{%
  \ifx#1\snapx@end
    \@xp\@gobblefour
  \else
    \ifx#1\relax \let#1\@empty\fi
    \def\@tempa##1 ##2 ##3\@nil{##1 ##2}%
%    \end{macrocode}
%
%    \begin{macrocode}
    \ifx#1\snapx@application
    \else
      \xdef\rqv@list{\rqv@list
        \ifx\@empty\rqv@list\else,\fi
        #3#1%
      }%
    \fi
    \@xp\xdef\csname rqv@#3#1\endcsname{\@tempa#4 v?.? ? \relax\@nil}%
    \ifx#1\snapx@format \snap@check{#3.fmt}%
    \else \snap@selfcheck{#3.sty}%
    \fi
  \fi
  \@ifnextchar *\snap@store@version\snap@store@error
}
\@onlypreamble\snap@store@b
%    \end{macrocode}
%  \end{macro}
%
%    Default setup is geared to write the dependency list to a \fn{.dep}
%    file. The option \opt{log} means write it to the \tex/ log instead.
%    \begin{macrocode}
\def\snap@write{\immediate\write\snap@out}
\let\snap@out\sixt@@n % fallback, probably never used
%    \end{macrocode}
%
%    \begin{macrocode}
\DeclareOption{dep}{%
  \def\snap@write{\immediate\write\snap@out}%
}
%    \end{macrocode}
%
%    \begin{macrocode}
\DeclareOption{log}{%
  \let\snap@write\typeout
}
%    \end{macrocode}
%
%    The purpose of the `test' option is to support a separate testing
%    procedure that resolves file names. If the \cs{RequireVersions}
%    data is extracted to a separate file, and
%\begin{verbatim}
%\RequirePackage[test]{snapshot}
%\end{verbatim}
%    is added at the top, then the file can be run as a small separate
%    \LaTeX{} job whose sole purpose is to produce in the log file a
%    nice list of fully resolved file names. A limited, but
%    system-independent variant of the \fn{kpsewhich} idea.
%
%    \begin{macrocode}
\let\snap@fake@b\relax
\DeclareOption{test}{%
  \def\snap@fake@b{\endinput \futurelet\@let@token\snap@ignoline}%
}
%    \end{macrocode}
%
%    For each font used by a document, we would like to list the
%    \fn{.tfm} file name and checksum. If \tex/ provided a
%    \cn{fontchecksum} primitive similar to \cn{fontname} that could be
%    used to get the checksum of any font, it would just about be
%    feasible to do this entirely from within \latex/. As a partial
%    solution we could at least generate the list of font file names, to
%    make it easier for an external utility to add the checksums.
%
%    In practice, extracting font names and checksums from the \fn{.dvi}
%    file will probably work well enough, leaving no work to be done by
%    the \pkg{snapshot} package in this area. But theoretically speaking
%    the output of a document could be affected by font metric files
%    that are loaded during \latex/ processing but that do not show up
%    in the \fn{.dvi} file.
%    \begin{macrocode}
\DeclareOption{tfm}{%
  \typeout{Option 'tfm' not implemented yet [1999/09/23]}%
}
%    \end{macrocode}
%
%    Warnings and errors.
%    \begin{macrocode}
\def\snap@mismatch@warning#1#2#3{\PackageWarningNoLine{#1}{#2}}
\def\snap@mismatch{\snap@mismatch@warning}
%    \end{macrocode}
%
%    \begin{macrocode}
\DeclareOption{error}{%
  \def\snap@mismatch{\PackageError}%
  \ifx\snap@select\@empty \let\snap@select\snap@select@all \fi
}
%    \end{macrocode}
%
%    \begin{macrocode}
\DeclareOption{warning}{%
  \def\snap@mismatch{\snap@mismatch@warning}%
  \ifx\snap@select\@empty \let\snap@select\snap@select@all \fi
}
%    \end{macrocode}
%
%    Because the exact form of the version number is not mandated by
%    LaTeX, just take the first two ``words'' delimited by spaces. And
%    take a little extra care to properly handle multiple spaces between
%    the words.
%    \begin{macrocode}
\def\snap@select@all#1#2 #3#4 #5\@nil{#1#2 #3#4}
\let\snap@select\@empty
%    \end{macrocode}
%
%    \begin{macrocode}
\DeclareOption{date}{%
  \def\snap@select#1#2 #3\@nil{#1#2}%
}
%    \end{macrocode}
%
%    \begin{macrocode}
\def\snap@select@version#1{%
  \ifodd 0#11 \@xp\snap@sva\@xp#1\else\@xp\snap@select@version\fi
}
\def\snap@sva#1.#2 #3\@nil{#1.#2}
\def\snap@select@major#1{%
  \ifodd 0#11 \@xp\snap@svm\@xp#1\else\@xp\snap@select@major\fi
}
\def\snap@svm#1.#2\@nil{#1}
%    \end{macrocode}
%
%    \begin{macrocode}
\DeclareOption{version}{%
  \def\snap@select#1#2 #3{\snap@select@version #3}%
}
%    \end{macrocode}
%
%    \begin{macrocode}
\DeclareOption{major-version}{%
  \def\snap@select#1#2 #3{\snap@select@major #3}%
}
%    \end{macrocode}
%
%    \begin{macrocode}
\ProcessOptions\par
%    \end{macrocode}
%
%    We need the following patch to make up for the fact that
%    \cs{@pkgextension} and \cs{@clsextension} are marked in the \latex/
%    kernel as \qq{only preamble}.
%    \begin{macrocode}
\edef\snap@restore@extensions{%
  \def\@nx\@pkgextension{\@pkgextension}%
  \def\@nx\@clsextension{\@clsextension}%
}
%    \end{macrocode}
%
%    Pad filename strings out to 8+3 length so that the list will look
%    pretty.
%    \begin{macrocode}
\def\snap@pad#1#2#3#4#5#6#7#8#9{\snap@pad@a{#1#2#3#4#5#6#7#8#9}}
\def\snap@pad@a#1#2#3#4#5\@nil{\snap@pad@b#1#2#3#4\space\@nil}
\def\snap@pad@b#1\space#2\@nil#3{\def#3{#2}}
%    \end{macrocode}
%
%    First stage: discard leading spaces before the first and second
%    nonspace strings in the argument. Take the first nonspace string as
%    the date. Since we only do equal/not-equal testing on dates, it
%    does not seem essential to test if it is really a valid date string
%    or not (yyyy/mm/dd).
%    \begin{macrocode}
\def\snap@trim@version#1#2 #3{#1#2 \snap@trim@b #3}
%    \end{macrocode}
%    Second stage: Scan for a version number. In order to handle some
%    idiosyncratic cases, such as url.sty version 1.4, we can't simply
%    take the second nonspace string as the version number but need to
%    look for a leading digit.
%    \begin{macrocode}
\def\snap@trim@b#1{\ifodd 0#11 v#1\@xp\snap@trim@c\fi \snap@trim@b}
%    \end{macrocode}
%    Arg 1 here is \cs{snap@trim@b}, which we just need to discard.
%    \begin{macrocode}
\def\snap@trim@c#1#2 #3\@nil{#2}
%    \end{macrocode}
%
%    \begin{macrocode}
\let\rqv@list=\@empty
%    \end{macrocode}
%
%    If \verb'\fmtname.fmt' is not already in the file list, add it.
%    \begin{macrocode}
\edef\@tempc#1\fmtname{#1\fmtname}\@tempc
\def\@tempa#1,\fmtname.fmt,#2#3\@nil{#2}
\edef\@tempb{\@nx\@tempa,\@filelist,\fmtname.fmt,}
\if ?\@tempb?\@nil
  \edef\@filelist{\fmtname.fmt,\@filelist}%
  \def\@tempc{LaTeX2e}%
  \@xp\edef\csname ver@\fmtname.fmt\endcsname{%
    \fmtversion\space
    v\ifx\@tempc\fmtname 2.e\else ?.?\fi
  }%
\fi
\listfiles
\def\@dofilelist{%
  \snap@restore@extensions
  \ifx\rqv@list\@empty
  \else \rqv@compare@lists
  \fi
  \ifx\snap@write\typeout
  \else
    \newwrite\snap@out
    \immediate\openout\snap@out=\jobname.dep \relax
  \fi
  \snap@write{\string\RequireVersions\@charlb}%
%    \end{macrocode}
%    Since the exact version number of \TeX{} is not normally accessible
%    from inside \latex/, we use a nominal date of 1990/03/25, which is
%    when version 3.0 of \fn{tex.web} was released by Knuth.
%    \begin{macrocode}
  \snap@write{\space\space *{application}{TeX}%
             \space\space\space\space\space{1990/03/25 v3.x}}%
  \@for\@currname:=\@filelist\do{%
    \filename@parse\@currname
    \ifx\filename@ext\relax
      \def\@tempa{file}\def\@tempd{.tex}\def\filename@ext{tex}%
      \def\@tempb{~~~}%
    \else\ifx\filename@ext\@pkgextension
      \def\@tempa{package}\let\@tempd\@empty
      \def\@tempb{}%
    \else\ifx\filename@ext\@clsextension
      \def\@tempa{class}\let\@tempd\@empty
      \def\@tempb{~~}%
    \else\ifx\filename@ext\@fmtextension
      \def\@tempa{format}\let\@tempd\@empty
      \def\@tempb{~}%
    \else\ifx\filename@ext\@tfmextension
      \def\@tempa{tfm}\let\@tempd\@empty
      \def\@tempb{~~~~}%
    \else
      \def\@tempa{file}\edef\@tempd{.\filename@ext}%
      \def\@tempb{~~~}%
    \fi\fi\fi\fi\fi
    \@xp\let\@xp\@tempe
      \csname ver@\filename@base.\filename@ext\endcsname
%    \end{macrocode}
%    If a file contains just \verb'\ProvidesFoo{xyz}' without \emph{any}
%    optional argument, then \cs{ver@xyz} ends up empty. Resetting it to
%    \cs{relax} is the easiest way to get the fallback version
%    number in that case also.
%    \begin{macrocode}
    \ifx\@tempe\@empty \let\@tempe\relax \fi
    \edef\@tempe{%
      \ifx\@tempe\relax 0000/00/00 v0.0%
      \else
        \@xp\@xp\@xp\snap@trim@version\@xp\@tempe\space v0.0 v0.0 \@nil
      \fi
    }%
    \edef\@tempc{\filename@area\filename@base\@tempd}% full file name
    \@xp\snap@pad\@tempc\space~~~~~~~~~~~~~~~~\@nil\@tempd
    \begingroup \let~\space
      \snap@write{\space\space *{\@tempa}\@tempb{\@tempc}\@tempd{\@tempe}}%
    \endgroup
  }%
  \snap@write{\@charrb}%
  \ifx\snap@write\typeout
  \else \immediate\closeout\snap@out
    \typeout{Dependency list written on \jobname.dep.}%
  \fi
}%
%    \end{macrocode}
%
%    The \cs{rqv@compare@lists} function checks to see if any files
%    are found only in the RequireVersions list or only in
%    \cs{@filelist}. To see which files are only in \cs{@filelist}, we
%    map the \cs{rqv@condense} function across both lists, reinitializing
%    \cs{L} (used here as a scratch variable) in between. As a side
%    effect this leaves the desired file names in \cs{L}. Then the same
%    process with the order of the lists reversed tells us which ones
%    are only in \cs{rqv@list}.
%    \begin{macrocode}
\def\rqv@condense#1,{%
  \if ,#1,%
  \else
    \@xp\ifx\csname ver@#1\endcsname\N
    \else
      \edef\L{\L,#1}%
      \@xp\let\csname ver@#1\endcsname=\N
    \fi
  \fi
  \rqv@condense
}
%    \end{macrocode}
%
%    \begin{macrocode}
\def\rqv@compare@lists{%
  \begingroup
  \def\N{1}\let\L=\@gobble
  \@xp\rqv@condense \rqv@list,TeX,{,\relax\@xp\@gobbletwo\@xp},%
  \ifx\L\@gobble\let\L\@empty\fi
  \let\rqv@list=\L
  \let\L=\@gobble
  \@xp\rqv@condense \@filelist,{,\relax\@xp\@gobbletwo\@xp},%
  \ifx\L\@gobble\let\L\@empty\fi
  \@for\@currname:=\L\do{%
    \snap@mismatch{snapshot}{^^J%
      File \@currname\space loaded though not in
      \noexpand\RequireVersions list%
    }\@ehc
  }%
  \def\N{2}\let\L=\@gobble
  \@xp\rqv@condense\@filelist,TeX,{,\relax\@xp\@gobbletwo\@xp},%
  \let\L=\@gobble
  \@xp\rqv@condense\rqv@list,{,\relax\@xp\@gobbletwo\@xp},%
  \ifx\L\@gobble\let\L\@empty\fi
  \@for\@currname:=\L\do{%
    \snap@mismatch{snapshot}{^^J%
      File \@currname\space [\csname rqv@\@currname\endcsname]
      required but not loaded%
    }\@ehc
  }%
  \endgroup
}
%    \end{macrocode}
%
%    See the documentation above for the `test' option.
%    \begin{macrocode}
\begingroup \catcode\endlinechar=12\relax %
\long\gdef\snap@ignoline#1
{}\endgroup %
%    \end{macrocode}
%
%    \begin{macrocode}
\def\snap@fake@input#1#2#3#4{%
  \ifx#1\snapx@end
    \aftergroup\@@end \@xp\@gobblefour
  \else
    \ifx#1\snapx@format
    \else
      \message{^^J}%
      \@xp\snap@fake@b\@@input #3#1\relax
    \fi
  \fi
  \@ifnextchar *\snap@store@version\snap@store@error
}
%    \end{macrocode}
%
%    \begin{macrocode}
\newcommand{\rqvTest}[2][]{%
  \begingroup \catcode\endlinechar=12
  \catcode`\%=12 \catcode`\{=12 \catcode`\}=12\relax
%    \end{macrocode}
%    Since \cs{snap@fake@input} just compares \cs{snapx@foo} with
%    \cs{ifx}, making \cs{snapx@application}
%    and \cs{snapx@tfm} compare equal to \cs{snap@format}
%    ensures that only one comparison is needed to tell if
%    we shouldn't attempt to input the current file type.
%    \begin{macrocode}
  \let\snapx@application=\snapx@format \let\snapx@tfm=\snap@format
  \@ifnextchar *\snap@store@version\snap@store@error#2*{end}{}{}%
  \endgroup
}
%    \end{macrocode}
%
%    \begin{macrocode}
\@ifundefined{snap@fake@b}{}{%
  \let\snap@store@b\snap@fake@input
  \let\RequireVersions\rqvTest
}
%    \end{macrocode}
%
%    Compensate for a bug in old versions of \fn{amsgen.sty}. This is a
%    little tricky.
%
%    Old version: \cs{ver@amsgen}=1996/10/29 v1.2b
%
%    New version: \cs{ver@amsgen.sty}=1999/11/30 v2.0
%    \begin{macrocode}
%\@namedef{ver@amsgen.sty}{1996/10/29 v1.2b}
\AtBeginDocument{%
  \@ifundefined{ver@amsgen}{}{%
    \@xp\let\csname ver@amsgen.sty\@xp\endcsname
                    \csname ver@amsgen\endcsname
  }%
}
%    \end{macrocode}
%
%    Terminate here without touching \LaTeX{} internals, unless
%    one of the relevant snapshot options was chosen.
%    \begin{macrocode}
\let\snap@compare@versions\@gobble \let\snap@check\@gobble
\let\snap@selfcheck\@gobble \let\snap@selfcheck@a\@gobble
\ifx\snap@select\@empty \endinput \fi
%    \end{macrocode}
%
%    \begin{macrocode}
\begingroup \catcode`\.=11\relax
\gdef\snap@selfcheck@b#1\rqv@snapshot.sty#2#3\@nil{T#2}
\gdef\snap@selfcheck@a#1{%
  \if\@xp\snap@selfcheck@b\csname rqv@#1\endcsname T%
         \rqv@snapshot.sty F\@nil
    \snap@check{#1}%
  \fi
}
\endgroup
%    \end{macrocode}
%
%    \begin{macrocode}
\def\@nofmt#1.fmt.#2 {#1 }
%    \end{macrocode}
%
%    \begin{macrocode}
\def\snap@mismatch@a#1#2#3{%
  \snap@mismatch{snapshot}{^^J%
    \space\space Required version #2 of \@nofmt#1.fmt. and^^J%
    \space\space provided version #3 do not match%
  }\@ehc
}
%    \end{macrocode}
%
%    When comparing \cs{rqv@foo.sty} (information from a previous
%    \latex/ run) with \cs{ver@foo.sty} (information from current run),
%    we first call \cs{snap@trim@version} on the latter to clear away
%    any idiosyncrasies in the contents.
%    \begin{macrocode}
\def\snap@compare@versions#1{%
  \begingroup
    \@ifundefined{rqv@#1}{}{%
      \edef\0{\csname rqv@#1\endcsname}%
      \edef\1{\csname ver@#1\endcsname}%
      \edef\1{\@xp\snap@trim@version\1 v0.0 v0.0 \@nil}%
      \edef\@tempa{\@xp\snap@select\0 v0.0 v0.0 \@nil}%
      \edef\@tempb{\@xp\snap@select\1 v0.0 v0.0 \@nil}%
      \ifx\@tempa\@tempb
      \else
        \edef\@tempd{\@nx\snap@mismatch@a{#1}{\@tempa}{\@tempb}}%
        \@xp\@tempd
      \fi
    }%
  \endgroup
}
%    \end{macrocode}
%
%    Because \cs{ProvidesFile} is used in \fn{.fd} files which are
%    normally read with special catcodes, there tend to
%    be problems with whitespace characters being erroneously lost from
%    the second argument. Since we have to put in a \cs{snap@check} call
%    anyway, while we're at it let's fix a bug of this type that
%    affected some older versions of \latex/.
%    \begin{macrocode}
\def\ProvidesFile#1{%
  \def\snap@checker{\snap@check{#1}}%
  \begingroup
    \aftergroup\snap@checker
    \catcode`\ 10\catcode\endlinechar 10 %
    \@makeother\/%
    \@makeother\&%
    \@ifnextchar[{\@providesfile{#1}}{\@providesfile{#1}[]}%
}
%    \end{macrocode}
%
%    \begin{macrocode}
\def\@pr@videpackage[#1]{%
  \expandafter\xdef\csname ver@\@currname.\@currext\endcsname{#1}%
  \ifx\@currext\@clsextension
    \typeout{Document Class: \@gtempa\space#1}%
  \else
    \wlog{Package: \@gtempa\space#1}%
  \fi
  \snap@check{\@currname.\@currext}%
}
%    \end{macrocode}
%
%    The usual \cs{endinput} to ensure that random garbage at the end of
%    the file doesn't get copied by \fn{docstrip}.
%    \begin{macrocode}
\endinput
%    \end{macrocode}
%
% \section*{To Do}
%
% \begin{itemize}
% \item Provide a test to distinguish between shared-use files and
%    document-specific files? Document-specific files would be things
%    like graphics files loaded via \cs{includegraphics} or book
%    chapters loaded via \cs{include}. But there might also be something
%    like \verb'\input{my-book-macros}' in the preamble. Maybe authors
%    should be encouraged to put this after \verb'\begin{document}'? Or,
%    even, after \verb'\begin{abstract}' so that the abstract will
%    contain only lowest-common-denominator \LaTeX{} commands?
%
%    The non-document-specific files most commonly loaded after
%    \verb'\begin{document}' would be \fn{.fd} files, but there is also
%    the possibility of autoloaded stuff (\fn{alatex} format).
% \end{itemize}
%
% \CheckSum{777}
% \Finale