Package: bcache-tools
Priority: optional
Section: utils
Installed-Size: 105
Maintainer: Tom Strickx <tstrickx@rootcu.be>
Architecture: amd64
Version: 1.0.4-drbl1
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.4), libuuid1 (>= 2.16), initramfs-tools
Filename: pool/drbl/live-ubuntu-experimental/bcache-tools/bcache-tools_1.0.4-drbl1_amd64.deb
Size: 15536
MD5sum: 82e243084242e69dd8bf82c668bfc574
SHA1: e2960abdb70aeb76dc8470141ec9b808b7827133
SHA256: 6dd69d0e8cf21b62c0904ad0198b5a49eac79eda5759f4cfe86c9624a1c2cdd4
SHA512: eac0ee5734fb14d11294635f8754a46e5848f8774cbe95bdfb36ec6edb64954308f3576030239ca0feaa15dabb6c6da92c096a4dc32a00ee60c405988b7d5f3b
Description: bcache userspace tools
 Bcache allows the use of SSDs to cache other block devices.
 .
 Documentation for the run time interface is included in the kernel tree, in
 Documentation/bcache.txt.
 .
 This package includes udev rules, initramfs support and the following tools:
 make-bcache
 Formats block devices for use with bcache.  Devices can be formatted for use
 as a cache or as a backing device.
 The most important option is for specifying the bucket size.
 Allocation is done in terms of buckets, and cache hits are counted per bucket;
 thus a smaller bucket size will give better cache utilization, but poorer write
 performance. The bucket size is intended to be equal to the size of your SSD's
 erase blocks, which seems to be 128k-512k for most SSDs; feel free to
 experiment.
 .
 bcache-super-show
 Prints the bcache superblock of a cache device or a backing device.
Homepage: http://bcache.evilpiepirate.org/

Package: bcache-tools
Priority: optional
Section: utils
Installed-Size: 99
Maintainer: Tom Strickx <tstrickx@rootcu.be>
Architecture: i386
Version: 1.0.4-drbl1
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.4), libuuid1 (>= 2.16), initramfs-tools
Filename: pool/drbl/live-ubuntu-experimental/bcache-tools/bcache-tools_1.0.4-drbl1_i386.deb
Size: 15754
MD5sum: c4d7c638547266120a64c15e107b2551
SHA1: 75b8bcd3ccc211368a2691912d78eece1b15964a
SHA256: 89aef2a59284449c1018c2e3d1b48cfec4413146d90a02242e5d692f160a971c
SHA512: cddb6c9449674db1ceff98d0458b9e78d9562582542ecb66c8cbc5b49de8cdc2e9f52aae356918bf183a48916953d99d159eaa774b94112e4b482f9c935bc0ca
Description: bcache userspace tools
 Bcache allows the use of SSDs to cache other block devices.
 .
 Documentation for the run time interface is included in the kernel tree, in
 Documentation/bcache.txt.
 .
 This package includes udev rules, initramfs support and the following tools:
 make-bcache
 Formats block devices for use with bcache.  Devices can be formatted for use
 as a cache or as a backing device.
 The most important option is for specifying the bucket size.
 Allocation is done in terms of buckets, and cache hits are counted per bucket;
 thus a smaller bucket size will give better cache utilization, but poorer write
 performance. The bucket size is intended to be equal to the size of your SSD's
 erase blocks, which seems to be 128k-512k for most SSDs; feel free to
 experiment.
 .
 bcache-super-show
 Prints the bcache superblock of a cache device or a backing device.
Homepage: http://bcache.evilpiepirate.org/

Package: chntpw
Priority: optional
Section: admin
Installed-Size: 126
Maintainer: Javier Fernandez-Sanguino Pen~a <jfs@debian.org>
Architecture: amd64
Version: 0.99.6-2.drbl1
Depends: libc6 (>= 2.14), libgcrypt11 (>= 1.4.5)
Filename: pool/drbl/live-ubuntu-experimental/chntpw/chntpw_0.99.6-2.drbl1_amd64.deb
Size: 48228
MD5sum: 704ca5a9debe0c13d1d447bf0034c7b9
SHA1: 98c462d6ac028acef5a6be213520008763efc3e4
SHA256: 002a45ae7d6435ced71708a5bac908eb3c1b6f802de78c067fa86e29df3ca90d
SHA512: 68edaeecb4de9d8c15b30c17078433584c49eefdc2a3582f0cf3551ca108a580210b3f4befef7e3c8af11a9f52ff5d773af34a3a8a2e1b2eb9c1c4aef8bb60e8
Description: NT SAM password recovery utility
 This little program provides a way to view information and
 change user passwords in a Windows NT/2000 user database file.
 Old passwords need not be known since they are overwritten.
 In addition it also contains a simple registry editor
 (same size data writes) and an hex-editor which enables you to
 fiddle around with bits and bytes in the file as you wish.
 .
 If you want GNU/Linux bootdisks for offline password recovery
 you can add this utility to custom image disks or use those provided
 at the tools homepage.
Homepage: http://pogostick.net/~pnh/ntpasswd/

Package: chntpw
Priority: optional
Section: admin
Installed-Size: 125
Maintainer: Javier Fernandez-Sanguino Pen~a <jfs@debian.org>
Architecture: i386
Version: 0.99.6-2.drbl1
Depends: libc6 (>= 2.7), libgcrypt11 (>= 1.4.5)
Filename: pool/drbl/live-ubuntu-experimental/chntpw/chntpw_0.99.6-2.drbl1_i386.deb
Size: 46944
MD5sum: ccc9b44cd3d4b88005b2c1687df616c8
SHA1: 3fdd7d2d23db8bc61a370ceafc4520b4c2406bd5
SHA256: bf7ecc04a71d68f63a860b71339152162c2874d250376d0281fa64fda814e20f
SHA512: b9cf4f5f65a548bc9298fa106b92e3267ce22e329cb460e6a35baa363345c5cb71d9c59cdf189d947c95abb30231af40dce209b45aad893e95a95618fc2e5a4b
Description: NT SAM password recovery utility
 This little program provides a way to view information and
 change user passwords in a Windows NT/2000 user database file.
 Old passwords need not be known since they are overwritten.
 In addition it also contains a simple registry editor
 (same size data writes) and an hex-editor which enables you to
 fiddle around with bits and bytes in the file as you wish.
 .
 If you want GNU/Linux bootdisks for offline password recovery
 you can add this utility to custom image disks or use those provided
 at the tools homepage.
Homepage: http://pogostick.net/~pnh/ntpasswd/

Package: dosfstools-dbg
Priority: extra
Section: debug
Installed-Size: 178
Maintainer: Daniel Baumann <mail@daniel-baumann.ch>
Architecture: amd64
Source: dosfstools
Version: 3.0.25-1
Depends: dosfstools (= 3.0.25-1)
Filename: pool/drbl/live-ubuntu-experimental/dosfstools/dosfstools-dbg_3.0.25-1_amd64.deb
Size: 153466
MD5sum: f768cab4a9ece4376ef679855296bb9c
SHA1: d15f22bb9158cd4d8b291406de202a2b8010a370
SHA256: 36155dc06ef3a1b23c625ca14bb99157721521b19753926c6b135147f9f7f0c0
SHA512: 4c51cc6265713b2bfa26ad2557ddd26431994e6951ae465d636599452fef7d0d1da779d2f3262398fed0bac067caed49c52bd077820e76852b9a99bad1c35ed5
Description: utilities for making and checking MS-DOS FAT filesystems (debug)
 The dosfstools package includes the mkfs.fat and fsck.fat utilities, which
 respectively make and check MS-DOS FAT filesystems.
 .
 This package contains the debugging symbols.
Homepage: http://daniel-baumann.ch/software/dosfstools/

Package: dosfstools-dbg
Priority: extra
Section: debug
Installed-Size: 211
Maintainer: Daniel Baumann <mail@daniel-baumann.ch>
Architecture: i386
Source: dosfstools
Version: 3.0.25-1
Depends: dosfstools (= 3.0.25-1)
Filename: pool/drbl/live-ubuntu-experimental/dosfstools/dosfstools-dbg_3.0.25-1_i386.deb
Size: 146878
MD5sum: b65856701bb28c7c3a3b01725ea49544
SHA1: c3ba5b7ca7281ae62997170563ef2db9121fbd35
SHA256: 772ca9058652d3b8e92b82361ef0fc8fa2fe7cebd1ab81674b71be971ed45d7e
SHA512: b5aaa46309a7e5383d3bc9c7fe1dfa5b2f8a0a003d9e67edcaed1adf9bab636eb1c3a9e65b081beee86d8431ff2f5c8090765ebcdbc510eefba2fabcecae8991
Description: utilities for making and checking MS-DOS FAT filesystems (debug)
 The dosfstools package includes the mkfs.fat and fsck.fat utilities, which
 respectively make and check MS-DOS FAT filesystems.
 .
 This package contains the debugging symbols.
Homepage: http://daniel-baumann.ch/software/dosfstools/

Package: dosfstools-udeb
Priority: optional
Section: debian-installer
Installed-Size: 133
Maintainer: Daniel Baumann <mail@daniel-baumann.ch>
Architecture: amd64
Source: dosfstools
Version: 3.0.25-1
Depends: libc6-udeb (>= 2.17)
Filename: pool/drbl/live-ubuntu-experimental/dosfstools/dosfstools-udeb_3.0.25-1_amd64.udeb
Size: 38608
MD5sum: b59f7eaf05dd5dc7c0967e8ecf5999cc
SHA1: bf32cb376dcea09f31754e16880ae61a1ef43d33
SHA256: f8ba1175fd686ddbfe47fb1a68134abb9c56ca00265bc1e0ef3c80a66109faa8
SHA512: 3021057debb6d8a5152ed4d30699be4d50388d136194a2d997655f498001466e08a14993c0c282715d53f4508ffb7d341f308a3677ca0b56dbf574a20210b690
Description: utilities for making and checking MS-DOS FAT filesystems (udeb)

Package: dosfstools-udeb
Priority: optional
Section: debian-installer
Installed-Size: 146
Maintainer: Daniel Baumann <mail@daniel-baumann.ch>
Architecture: i386
Source: dosfstools
Version: 3.0.25-1
Depends: libc6-udeb (>= 2.17)
Filename: pool/drbl/live-ubuntu-experimental/dosfstools/dosfstools-udeb_3.0.25-1_i386.udeb
Size: 38408
MD5sum: 3e5593dc4530925ee84587e1e98753ad
SHA1: 1256a81af9a4080e9a43b7a26f29a5b9d5139844
SHA256: f0cbaadfd1f0075ad81da314d64158a5538b7262dac5340f71a24292d635103f
SHA512: 197aa54cac7666dd993d9d88fdaa4624807da2de659fdec635197bdc9a5216fd74558f1e9513401fb457b43249a0afa0f36ed5277d66389c8218f61f7c9b2d7a
Description: utilities for making and checking MS-DOS FAT filesystems (udeb)

Package: dosfstools
Priority: optional
Section: otherosfs
Installed-Size: 183
Maintainer: Daniel Baumann <mail@daniel-baumann.ch>
Architecture: amd64
Version: 3.0.25-1
Depends: libc6 (>= 2.14)
Filename: pool/drbl/live-ubuntu-experimental/dosfstools/dosfstools_3.0.25-1_amd64.deb
Size: 83830
MD5sum: 38c20cd4f9bb97ec2511ec8a3e7790b1
SHA1: 5da0a7e1a9aca7e998c5a2b4f305afd9f061a132
SHA256: 5efec66e67b401474196fb8bc20458d7c50e64a6fc1a4bc341a8268a0d8f55cd
SHA512: e41637dcd0752a47c9e568b3aca59fa51d7da86a8fcead966cfff9c67379fb72544776607317c9f8fda6716714fad0f87ec5e51bed8e11e34ec97c22cf058ddf
Description: utilities for making and checking MS-DOS FAT filesystems
 The dosfstools package includes the mkfs.fat and fsck.fat utilities, which
 respectively make and check MS-DOS FAT filesystems.
Homepage: http://daniel-baumann.ch/software/dosfstools/

Package: dosfstools
Priority: optional
Section: otherosfs
Installed-Size: 227
Maintainer: Daniel Baumann <mail@daniel-baumann.ch>
Architecture: i386
Version: 3.0.25-1
Depends: libc6 (>= 2.7)
Filename: pool/drbl/live-ubuntu-experimental/dosfstools/dosfstools_3.0.25-1_i386.deb
Size: 83906
MD5sum: b366377a801085403de59f85ccbde41f
SHA1: 79ae9005361cb8b68fe82230a48883a6e91b071d
SHA256: 76fdae000d946f49218ca4fad9e0110cf4fbf75189a7476a28216af1d66a48fa
SHA512: eea738ad09a769210c5acc3bf7923c45c0b47f8b1b9d40921bc46f053a90686a6aa21f21929f2c51dbcdb111319393cc1a643ea434b1d65a9b0b869bd0d66199
Description: utilities for making and checking MS-DOS FAT filesystems
 The dosfstools package includes the mkfs.fat and fsck.fat utilities, which
 respectively make and check MS-DOS FAT filesystems.
Homepage: http://daniel-baumann.ch/software/dosfstools/

Package: gdisk-noicu
Priority: extra
Section: oldlibs
Installed-Size: 28
Maintainer: Guillaume Delacour <gui@iroqwa.org>
Architecture: all
Source: gdisk
Version: 1.0.0-drbl1
Depends: gdisk
Filename: pool/drbl/live-ubuntu-experimental/gdisk/gdisk-noicu_1.0.0-drbl1_all.deb
Size: 4442
MD5sum: c2cd96550fa6bd63f733920fd5c4de08
SHA1: 02d2f811a27d2d79d77f406c1c7aee3ace3e041a
SHA256: 64a18a879cc4c49b0ffa7e03b430b96b1030f0270a061d3a5e1b165da14f6682
SHA512: ecb6f0e617f1972ae38406b937dd73b1b44ba3e37f078ca14ef8c31d380ba37258b59034aaca3ddc0138fe620e99ae33d46924afd5397a7fd527f1bfd0dff647
Description: transitional dummy package
 This is a transitional dummy package. It can safely be removed.
Homepage: http://sourceforge.net/projects/gptfdisk/

Package: gdisk
Priority: extra
Section: admin
Installed-Size: 799
Maintainer: Guillaume Delacour <gui@iroqwa.org>
Architecture: amd64
Version: 1.0.0-drbl1
Replaces: gdisk-noicu (<< 0.8.10-1~)
Depends: libc6 (>= 2.14), libgcc1 (>= 1:4.1.1), libncursesw5 (>= 5.6+20070908), libpopt0 (>= 1.14), libstdc++6 (>= 4.9), libtinfo5, libuuid1 (>= 2.16)
Recommends: groff-base
Breaks: gdisk-noicu (<< 0.8.10-1~)
Filename: pool/drbl/live-ubuntu-experimental/gdisk/gdisk_1.0.0-drbl1_amd64.deb
Size: 198442
MD5sum: 94988219662fd47d9e775da18bb2e54a
SHA1: e718b9ac6d4426fc476d275ee689f4c7affbea8c
SHA256: 428a3c6250d29e5fbd29978b9aba16a773edbf2489d462e047f1be994c9e5ab8
SHA512: 9ac4f74407f192d893b294a95f81d9e6238c7bb4ec26f94807ceb3fabb9839f270a550ceb95d5a1a9abccd999aa1c5b0bf881eb14f177f52a49973e69a3bb153
Description: GPT fdisk text-mode partitioning tool
 GPT fdisk (aka gdisk) is a text-mode partitioning
 tool that works on Globally Unique Identifier
 (GUID) Partition Table (GPT) disks, rather than
 on the more common (through 2009)
 Master Boot Record (MBR) partition tables.
 .
 Please note that gdisk is still in beta version.
Homepage: http://sourceforge.net/projects/gptfdisk/

Package: gdisk
Priority: extra
Section: admin
Installed-Size: 856
Maintainer: Guillaume Delacour <gui@iroqwa.org>
Architecture: i386
Version: 1.0.0-drbl1
Replaces: gdisk-noicu (<< 0.8.10-1~)
Depends: libc6 (>= 2.4), libgcc1 (>= 1:4.1.1), libncursesw5 (>= 5.6+20070908), libpopt0 (>= 1.14), libstdc++6 (>= 4.9), libtinfo5, libuuid1 (>= 2.16)
Recommends: groff-base
Breaks: gdisk-noicu (<< 0.8.10-1~)
Filename: pool/drbl/live-ubuntu-experimental/gdisk/gdisk_1.0.0-drbl1_i386.deb
Size: 209138
MD5sum: 6b796e6c506e9bac841d77b2bcf5d89c
SHA1: bcbb82636c2914b6f5d758302cbc277d687fa7ea
SHA256: c7f794586f023079b1ef110124752d71da35aaef96a3dab3542c0253ba548c41
SHA512: a144a122ce86625cfabee54b6f9b4bf1d65b5e70e24963e7527a8fdf6bd15eac24b9fd787e13fae5459d9598110222a25cafca52fe1528bcf1731b9862fe3174
Description: GPT fdisk text-mode partitioning tool
 GPT fdisk (aka gdisk) is a text-mode partitioning
 tool that works on Globally Unique Identifier
 (GUID) Partition Table (GPT) disks, rather than
 on the more common (through 2009)
 Master Boot Record (MBR) partition tables.
 .
 Please note that gdisk is still in beta version.
Homepage: http://sourceforge.net/projects/gptfdisk/

Package: gparted-dbgsym
Priority: extra
Section: debug
Installed-Size: 5317
Maintainer: Phillip Susi <psusi@ubuntu.com>
Architecture: amd64
Source: gparted
Version: 0.29.0-drbl1
Depends: gparted (= 0.29.0-drbl1)
Filename: pool/drbl/live-ubuntu-experimental/gparted/gparted-dbgsym_0.29.0-drbl1_amd64.deb
Size: 5228874
MD5sum: f228b7b059637038a845535cc3ec921a
SHA1: 1a169c9e7ffb2a5aa7de8f3477c6df97088efe77
SHA256: 7312ab64331fe827a260cc760b498d3c3ac088c955c4124429db6ec35d73f667
SHA512: 3529611f6cefc99bf204fe81f768895ddbd5a696dbc0c2f845aecda70fdac1ded95ecf728880923f52dafbcd36a0e94fd08a0d1d94655b67b8d26b946680951a
Description: Debug symbols for gparted
Auto-Built-Package: debug-symbols
Build-Ids: 08c64de274acedc007b8be1d08d18b0d06aec4c3

Package: gparted
Priority: optional
Section: gnome
Installed-Size: 4572
Maintainer: Phillip Susi <psusi@ubuntu.com>
Architecture: amd64
Version: 0.29.0-drbl1
Depends: libatkmm-1.6-1v5 (>= 2.24.0), libc6 (>= 2.14), libgcc1 (>= 1:3.0), libglib2.0-0 (>= 2.16.0), libglibmm-2.4-1v5 (>= 2.50.0), libgtk2.0-0 (>= 2.14.0), libgtkmm-2.4-1v5 (>= 1:2.24.0), libpangomm-1.4-1v5 (>= 2.40.0), libparted-fs-resize0 (>= 3.1), libparted2 (>= 3.1), libsigc++-2.0-0v5 (>= 2.8.0), libstdc++6 (>= 5.2), libuuid1 (>= 2.16)
Suggests: xfsprogs, reiserfsprogs, reiser4progs, jfsutils, ntfs-3g, dosfstools, mtools, yelp, kpartx, dmraid, dmsetup, gpart
Breaks: udisks2 (<< 2.1.5)
Filename: pool/drbl/live-ubuntu-experimental/gparted/gparted_0.29.0-drbl1_amd64.deb
Size: 1051716
MD5sum: a7c66510571eb036d0cc62fb4dbdffa8
SHA1: 9b568aafdf02ac7a1e263377806d6079e2830dec
SHA256: 2a9202e8a035cdabeef5e1c3f0171d0d3681fa0d0da2036d62846330eed75be3
SHA512: 6ef8ccea267edef924aee563a40688f167bce10d98b807fc746ff62c472d7806e80e541acbb6b1c5c35ab473a274adf222a6812095ececcf6e147b05ddcdadae
Description: GNOME partition editor
 GParted uses libparted to detect and manipulate devices and partition
 tables while several (optional) filesystem tools provide support for
 filesystems not included in libparted.
Homepage: http://gparted.sourceforge.net

Package: gparted-dbgsym
Priority: extra
Section: debug
Installed-Size: 5141
Maintainer: Phillip Susi <psusi@ubuntu.com>
Architecture: i386
Source: gparted
Version: 0.29.0-drbl1
Depends: gparted (= 0.29.0-drbl1)
Filename: pool/drbl/live-ubuntu-experimental/gparted/gparted-dbgsym_0.29.0-drbl1_i386.deb
Size: 5078980
MD5sum: 0a367af6a8649a9b8a158058287f5852
SHA1: 69e4dbb8aa8de0c410944d93cb078337121849b5
SHA256: 91e1be087df006e6fc20171fa889bf16be41faebffd467ed2db1eadc9e0779c1
SHA512: e4b53fa2b1308c2dd85d946253e37173c370c8aaf31051259110ca8342bc2cf411be244a914f1c66e9c1dc1341cc2191da0502a774ee5f100309897a8aee2aca
Description: Debug symbols for gparted
Auto-Built-Package: debug-symbols
Build-Ids: 4ecd11f90ce948553e501739c7f5fa1be072b940

Package: gparted
Priority: optional
Section: gnome
Installed-Size: 4504
Maintainer: Phillip Susi <psusi@ubuntu.com>
Architecture: i386
Version: 0.29.0-drbl1
Depends: libatkmm-1.6-1v5 (>= 2.24.0), libc6 (>= 2.4), libgcc1 (>= 1:4.2), libglib2.0-0 (>= 2.16.0), libglibmm-2.4-1v5 (>= 2.50.0), libgtk2.0-0 (>= 2.14.0), libgtkmm-2.4-1v5 (>= 1:2.24.0), libpangomm-1.4-1v5 (>= 2.40.0), libparted-fs-resize0 (>= 3.1), libparted2 (>= 3.1), libsigc++-2.0-0v5 (>= 2.8.0), libstdc++6 (>= 5.2), libuuid1 (>= 2.16)
Suggests: xfsprogs, reiserfsprogs, reiser4progs, jfsutils, ntfs-3g, dosfstools, mtools, yelp, kpartx, dmraid, dmsetup, gpart
Breaks: udisks2 (<< 2.1.5)
Filename: pool/drbl/live-ubuntu-experimental/gparted/gparted_0.29.0-drbl1_i386.deb
Size: 1093830
MD5sum: 5c700d3f376ff630ecf170a8f7c27858
SHA1: cad7bf027d107746730fd9337b792a90c79113dd
SHA256: 6ce56ec811a023fb3a6696bc12dd13a7f2a74514767dcf1a235fe1db7e76273a
SHA512: c3366d2274ebf5236207fd661b8d0b19e24b69e579054396a09285a3efbad64a033e294714124f1f5a8d1fc91476919a3e39433834114adf46e1a5e50fc30907
Description: GNOME partition editor
 GParted uses libparted to detect and manipulate devices and partition
 tables while several (optional) filesystem tools provide support for
 filesystems not included in libparted.
Homepage: http://gparted.sourceforge.net

Package: gparted-dbgsym
Priority: extra
Section: debug
Installed-Size: 5289
Maintainer: Phillip Susi <psusi@ubuntu.com>
Architecture: amd64
Source: gparted
Version: 0.28.1-drbl1
Depends: gparted (= 0.28.1-drbl1)
Filename: pool/drbl/live-ubuntu-experimental/gparted/gparted-dbgsym_0.28.1-drbl1_amd64.deb
Size: 5197414
MD5sum: 6e16c8600e6f2a87c87b9a0b64d7ae68
SHA1: 40ee493ec3e74852ec6af3b8040cd1a67b7b49b3
SHA256: 7ad260ed683ef652219c1fc1745df2c2024b4c72cf3a0d59d07a133fc963c51d
SHA512: 47dc7b30b3fd18d82a4ebd15ffddcef4dae35ee8ed992427cf389014dd261edfbcbf935aa1ab21c6862564fa05bf8ff64fa1ee5791a300ce6db8166ab55a2fc4
Description: Debug symbols for gparted
Auto-Built-Package: debug-symbols
Homepage: http://gparted.sourceforge.net
Build-Ids: 06818da11e7b62a3743d104e652283fb69a13bbb

Package: gparted
Priority: optional
Section: gnome
Installed-Size: 4557
Maintainer: Phillip Susi <psusi@ubuntu.com>
Architecture: amd64
Version: 0.28.1-drbl1
Depends: libatkmm-1.6-1v5 (>= 2.24.0), libc6 (>= 2.14), libgcc1 (>= 1:3.0), libglib2.0-0 (>= 2.16.0), libglibmm-2.4-1v5 (>= 2.50.0), libgtk2.0-0 (>= 2.14.0), libgtkmm-2.4-1v5 (>= 1:2.24.0), libpangomm-1.4-1v5 (>= 2.40.0), libparted-fs-resize0 (>= 3.1), libparted2 (>= 3.1), libsigc++-2.0-0v5 (>= 2.8.0), libstdc++6 (>= 5.2), libuuid1 (>= 2.16)
Suggests: xfsprogs, reiserfsprogs, reiser4progs, jfsutils, ntfs-3g, dosfstools, mtools, yelp, kpartx, dmraid, dmsetup, gpart
Breaks: udisks2 (<< 2.1.5)
Filename: pool/drbl/live-ubuntu-experimental/gparted/gparted_0.28.1-drbl1_amd64.deb
Size: 1032638
MD5sum: b8d66f50ccd7c55d671ca8ad99a8e7a7
SHA1: 50ca7deb499a4c682cf8dc77868b14de214c6381
SHA256: 21cf8b577d4117a771b1784dadfc5d5844756303a09a67c7905aaf9fb83960b6
SHA512: 973e727a00a1dd7e1c4bb89b99d7e976915c09fe0426831e0774eb09629cf7e3dc09e149adbc4eecd9908492f6649c4970410fe5c91e276c3d68d23623ccc26a
Description: GNOME partition editor
 GParted uses libparted to detect and manipulate devices and partition
 tables while several (optional) filesystem tools provide support for
 filesystems not included in libparted.
Homepage: http://gparted.sourceforge.net

Package: gparted-dbgsym
Priority: extra
Section: debug
Installed-Size: 5035
Maintainer: Phillip Susi <psusi@ubuntu.com>
Architecture: i386
Source: gparted
Version: 0.28.1-drbl1
Depends: gparted (= 0.28.1-drbl1)
Filename: pool/drbl/live-ubuntu-experimental/gparted/gparted-dbgsym_0.28.1-drbl1_i386.deb
Size: 4971686
MD5sum: 3ba2329abf8b05b1c90959cda0841ae4
SHA1: 3531534df28fc5ff2414d2ef3bb88c03c7d3f7e6
SHA256: 735a9a21fabe24de431839894d6fea77118ca298fb764d2d4decdd26669bc18f
SHA512: dd94d0c308df2a945db6cd423a6005bd0bfe37d44bf29c7564ed038984ec0ce44da5042ebf5c0cc26bbf1fd8b718ab62455d62663280a2a52d206112ccd0697c
Description: Debug symbols for gparted
Auto-Built-Package: debug-symbols
Homepage: http://gparted.sourceforge.net
Build-Ids: b29c231c0a5449b5ef29e5a576b3c3272aad31d0

Package: gparted
Priority: optional
Section: gnome
Installed-Size: 4465
Maintainer: Phillip Susi <psusi@ubuntu.com>
Architecture: i386
Version: 0.28.1-drbl1
Depends: libatkmm-1.6-1v5 (>= 2.24.0), libc6 (>= 2.4), libgcc1 (>= 1:4.2), libglib2.0-0 (>= 2.16.0), libglibmm-2.4-1v5 (>= 2.50.0), libgtk2.0-0 (>= 2.14.0), libgtkmm-2.4-1v5 (>= 1:2.24.0), libpangomm-1.4-1v5 (>= 2.40.0), libparted-fs-resize0 (>= 3.1), libparted2 (>= 3.1), libsigc++-2.0-0v5 (>= 2.8.0), libstdc++6 (>= 5.2), libuuid1 (>= 2.16)
Suggests: xfsprogs, reiserfsprogs, reiser4progs, jfsutils, ntfs-3g, dosfstools, mtools, yelp, kpartx, dmraid, dmsetup, gpart
Breaks: udisks2 (<< 2.1.5)
Filename: pool/drbl/live-ubuntu-experimental/gparted/gparted_0.28.1-drbl1_i386.deb
Size: 1069992
MD5sum: 49533cd166da39496535f83ec9db11ef
SHA1: 459e55da1cfe01f3655668a1f6ac15770100b5df
SHA256: b94cd7066daaa996f6dbbd019ddd92868f47241641559adec2972119f8c558ab
SHA512: 4e078deb24aeb648a821aa1a766460fc265c16e444262154b99b47d39623e5c5eb04c6400c010bd7f4cc69f63cc56706a07e6c00638e55d0acfc72bf7393a820
Description: GNOME partition editor
 GParted uses libparted to detect and manipulate devices and partition
 tables while several (optional) filesystem tools provide support for
 filesystems not included in libparted.
Homepage: http://gparted.sourceforge.net

Package: jfbterm-dbgsym
Priority: extra
Section: debug
Installed-Size: 118
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: amd64
Source: jfbterm
Version: 0.4.7-9.5drbl
Depends: jfbterm (= 0.4.7-9.5drbl)
Filename: pool/drbl/live-ubuntu-experimental/jfbterm/jfbterm-dbgsym_0.4.7-9.5drbl_amd64.deb
Size: 95484
MD5sum: 00e256e81eeecf2196d24fe040c53936
SHA1: a3a70edf29af004f3779f2d1d89dac6276f0963f
SHA256: 6df2c1de3d7353cbc90ac2d592e53314dcf6c9aea0f11a9167eec8e61b7db4f9
SHA512: 172366e59e29c36c7248fc1c2d21d8ce9b00907782ea28d584f7c9913f8b00ae5cae3e9981159b1b245fd63f1b03d142a89c6f8c0141b430c5d6e18ba0fe17b0
Description: Debug symbols for jfbterm
Auto-Built-Package: debug-symbols
Homepage: http://jfbterm.sourceforge.jp/
Build-Ids: 30d74be0618ba478887ae3ed470efe9bdd5e868e

Package: jfbterm
Priority: optional
Section: utils
Installed-Size: 139
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: amd64
Version: 0.4.7-9.5drbl
Depends: libc6 (>= 2.15), unifont
Suggests: xfonts-base
Filename: pool/drbl/live-ubuntu-experimental/jfbterm/jfbterm_0.4.7-9.5drbl_amd64.deb
Size: 55628
MD5sum: 530be2de30f5d62a1384670030c1704b
SHA1: 1445d8ddf750b2374f2efc4705e7da15b54c2a74
SHA256: 5e7d058173ed0595f23af35e3e038021a3a3f925aae48034d79b6c964e3758b2
SHA512: 6f7bd66c1f15947c746bb4865f374174cefb380bb8ece200a2ed21950cd0c2e25aa95a1b87db8547dac38a9be526e6d32c4b7c123d762732a308fd95dc786e5f
Description: multilingual terminal on Linux framebuffer
 Jfbterm (J Framebuffer Terminal/Multilingual Extension) can display
 multilingual text on Linux framebuffer.  It can display ISO-2022
 text such as ISO-8859-{1-11,13-16}, ISO-2022-{JP,CN,KR}, EUC-JP,
 EUC-KR (aka Wangsung), EUC-CN (aka GB2312 or CN-GB).
 It also supports UTF-8, and other coding system such as SHIFT_JIS by
 using iconv(3).
 .
 It supports 8bpp PACKED-PIXELS PSEUDOCOLOR and (15|16|24|32) bpp
 PACKED-PIXELS TRUECOLOR framebuffers.  It also supports 1bpp, 2bpp,
 (and vga16fb on arch i386).
Homepage: http://jfbterm.sourceforge.jp/

Package: jfbterm-dbgsym
Priority: extra
Section: debug
Installed-Size: 103
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: i386
Source: jfbterm
Version: 0.4.7-9.5drbl
Depends: jfbterm (= 0.4.7-9.5drbl)
Filename: pool/drbl/live-ubuntu-experimental/jfbterm/jfbterm-dbgsym_0.4.7-9.5drbl_i386.deb
Size: 82674
MD5sum: c0bcbb7bbdb364ac60ceebe8ff7fb0eb
SHA1: ec514ee8063ba812b668caa669b49ea77e5a3ef4
SHA256: 75b070bad98abeacdd215d96889cb4dbbd3503fcfc4c9ca9327228c604a53c65
SHA512: 18dcac8d7eb90823fb2a6671d00c6811a2df2d31167395476aae1accaf221eceff9e54eff694d1d2fe0d7f9edfa444074d9a52509c7b7ee64fc042e81fbd5ef2
Description: Debug symbols for jfbterm
Auto-Built-Package: debug-symbols
Homepage: http://jfbterm.sourceforge.jp/
Build-Ids: c406ebce5fea253c857aabd4ebe38bde8dddf4a4

Package: jfbterm
Priority: optional
Section: utils
Installed-Size: 135
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: i386
Version: 0.4.7-9.5drbl
Depends: libc6 (>= 2.15), unifont
Suggests: xfonts-base
Filename: pool/drbl/live-ubuntu-experimental/jfbterm/jfbterm_0.4.7-9.5drbl_i386.deb
Size: 57618
MD5sum: 524bbf08541024b728c49d4a802fe029
SHA1: a367d20dde7a110c7287980bc1b0426dc11d9d9d
SHA256: d3cf11290a12241b43ca3548ab0205a64dfe8d614d48d71081567ed9130649ac
SHA512: 19491a755d641565fd9303dabdc9a6051ee1293e09ab71414fab976c3e8049db1aa3c4f677c4b36f7ede7faf4b08eaa40c397e45373ab94f516f9fe586447270
Description: multilingual terminal on Linux framebuffer
 Jfbterm (J Framebuffer Terminal/Multilingual Extension) can display
 multilingual text on Linux framebuffer.  It can display ISO-2022
 text such as ISO-8859-{1-11,13-16}, ISO-2022-{JP,CN,KR}, EUC-JP,
 EUC-KR (aka Wangsung), EUC-CN (aka GB2312 or CN-GB).
 It also supports UTF-8, and other coding system such as SHIFT_JIS by
 using iconv(3).
 .
 It supports 8bpp PACKED-PIXELS PSEUDOCOLOR and (15|16|24|32) bpp
 PACKED-PIXELS TRUECOLOR framebuffers.  It also supports 1bpp, 2bpp,
 (and vga16fb on arch i386).
Homepage: http://jfbterm.sourceforge.jp/

Package: jfbterm-dbgsym
Priority: extra
Section: debug
Installed-Size: 118
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: amd64
Source: jfbterm
Version: 0.4.7-9.6drbl
Depends: jfbterm (= 0.4.7-9.6drbl)
Filename: pool/drbl/live-ubuntu-experimental/jfbterm/jfbterm-dbgsym_0.4.7-9.6drbl_amd64.deb
Size: 95470
MD5sum: 45ca770de206fe6ae0e07e4fbbf44929
SHA1: e750484881b8b388bbf1509280bd7b07eedb8e3e
SHA256: e5a2648be5d5c6b2a9272adcf35f5cef982a13c54c1b60eae369671f9aa32fe7
SHA512: dacb9d2f445021ed349cd70f8da62ea6b159868e101b47b7f047cdcb09096cb1ec43f2655c03ea540c7d7eada4a6a52add44212f927f97e6148a9dbba32926d6
Description: Debug symbols for jfbterm
Auto-Built-Package: debug-symbols
Homepage: http://jfbterm.sourceforge.jp/
Build-Ids: 30d74be0618ba478887ae3ed470efe9bdd5e868e

Package: jfbterm
Priority: optional
Section: utils
Installed-Size: 173
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: amd64
Version: 0.4.7-9.2drbl
Depends: libc6 (>= 2.15), unifont
Suggests: xfonts-base
Filename: pool/drbl/live-ubuntu-experimental/jfbterm/jfbterm_0.4.7-9.2drbl_amd64.deb
Size: 53216
MD5sum: c6a1d205eb1598a3abf4bdc7ea2f44ce
SHA1: 77fa10e78b5feb9dbde40472f91fbc061095e457
SHA256: a0d249bccb1cb9421cdae547b604c9afb688ceee7a2c1d6cba69bcbe63181802
SHA512: cc018994aeb6de2773926d3b5d9e3248e787b349ae925fbd7f8e51483171b56f2503b339464cce2998db7452fe759fbee13db4d5a6c6bd2754f61bde0ed3ba51
Description: multilingual terminal on Linux framebuffer
 Jfbterm (J Framebuffer Terminal/Multilingual Extension) can display
 multilingual text on Linux framebuffer.  It can display ISO-2022
 text such as ISO-8859-{1-11,13-16}, ISO-2022-{JP,CN,KR}, EUC-JP,
 EUC-KR (aka Wangsung), EUC-CN (aka GB2312 or CN-GB).
 It also supports UTF-8, and other coding system such as SHIFT_JIS by
 using iconv(3).
 .
 It supports 8bpp PACKED-PIXELS PSEUDOCOLOR and (15|16|24|32) bpp
 PACKED-PIXELS TRUECOLOR framebuffers.  It also supports 1bpp, 2bpp,
 (and vga16fb on arch i386).
Homepage: http://jfbterm.sourceforge.jp/

Package: jfbterm
Priority: optional
Section: utils
Installed-Size: 169
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: i386
Version: 0.4.7-9.2drbl
Depends: libc6 (>= 2.15), unifont
Suggests: xfonts-base
Filename: pool/drbl/live-ubuntu-experimental/jfbterm/jfbterm_0.4.7-9.2drbl_i386.deb
Size: 53120
MD5sum: a8dca18b308508c1ce902957b6d04e23
SHA1: 45001c9603556977c649e83d3584989856b55214
SHA256: 3d3a2c3b4a54100bbca297b1fe436a8f172c1b59cac355842bfadfa8b2c9d3e1
SHA512: dd310061feebe3fb46aa1137fc0ffd81e57190054077d6aeff6c1b455d702dc6134b4f2ac5749faa8e1fe311ee7c22b2794656e18803db0e9e420b64e3db0070
Description: multilingual terminal on Linux framebuffer
 Jfbterm (J Framebuffer Terminal/Multilingual Extension) can display
 multilingual text on Linux framebuffer.  It can display ISO-2022
 text such as ISO-8859-{1-11,13-16}, ISO-2022-{JP,CN,KR}, EUC-JP,
 EUC-KR (aka Wangsung), EUC-CN (aka GB2312 or CN-GB).
 It also supports UTF-8, and other coding system such as SHIFT_JIS by
 using iconv(3).
 .
 It supports 8bpp PACKED-PIXELS PSEUDOCOLOR and (15|16|24|32) bpp
 PACKED-PIXELS TRUECOLOR framebuffers.  It also supports 1bpp, 2bpp,
 (and vga16fb on arch i386).
Homepage: http://jfbterm.sourceforge.jp/

Package: jfbterm
Priority: optional
Section: utils
Installed-Size: 139
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: amd64
Version: 0.4.7-9.6drbl
Depends: libc6 (>= 2.15), unifont
Suggests: xfonts-base
Filename: pool/drbl/live-ubuntu-experimental/jfbterm/jfbterm_0.4.7-9.6drbl_amd64.deb
Size: 55794
MD5sum: 192d9621e5bda5986f18046debaf3fd0
SHA1: 0db0e9cc295a9d6ed87c17451cd40a56e08b1661
SHA256: 01c333baa9a26db2c43c12fb9962f2175151c3acd5e05f671964d47deacdef38
SHA512: 94374b3796df509a770c1e7585a5e55c941b1bb56ac2cfc17d989afaa21aa100b5bc62695c0512ac9067a68e9c7851a8b0c3360b663bcca199be95f85db0e079
Description: multilingual terminal on Linux framebuffer
 Jfbterm (J Framebuffer Terminal/Multilingual Extension) can display
 multilingual text on Linux framebuffer.  It can display ISO-2022
 text such as ISO-8859-{1-11,13-16}, ISO-2022-{JP,CN,KR}, EUC-JP,
 EUC-KR (aka Wangsung), EUC-CN (aka GB2312 or CN-GB).
 It also supports UTF-8, and other coding system such as SHIFT_JIS by
 using iconv(3).
 .
 It supports 8bpp PACKED-PIXELS PSEUDOCOLOR and (15|16|24|32) bpp
 PACKED-PIXELS TRUECOLOR framebuffers.  It also supports 1bpp, 2bpp,
 (and vga16fb on arch i386).
Homepage: http://jfbterm.sourceforge.jp/

Package: jfbterm-dbgsym
Priority: extra
Section: debug
Installed-Size: 103
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: i386
Source: jfbterm
Version: 0.4.7-9.6drbl
Depends: jfbterm (= 0.4.7-9.6drbl)
Filename: pool/drbl/live-ubuntu-experimental/jfbterm/jfbterm-dbgsym_0.4.7-9.6drbl_i386.deb
Size: 82668
MD5sum: 72d3ccf234377534b6ced68c42d0280d
SHA1: 9c90f434813c8d309b85c44c37db98c39eb1dd07
SHA256: 221f853075f376ec81ed76758620c6c0803078e2ee2e385c9bd3e83ab0f15911
SHA512: 6b5ea07352c9aa7e9ed8b294cbf8c4678607db81ca085f9c4a965c8360a49a9d615c861bafe01aa817651abab5bf59f8e2808a22f0e72cc5b7970fb8b444ff45
Description: Debug symbols for jfbterm
Auto-Built-Package: debug-symbols
Homepage: http://jfbterm.sourceforge.jp/
Build-Ids: c406ebce5fea253c857aabd4ebe38bde8dddf4a4

Package: jfbterm
Priority: optional
Section: utils
Installed-Size: 135
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: i386
Version: 0.4.7-9.6drbl
Depends: libc6 (>= 2.15), unifont
Suggests: xfonts-base
Filename: pool/drbl/live-ubuntu-experimental/jfbterm/jfbterm_0.4.7-9.6drbl_i386.deb
Size: 57652
MD5sum: 94a9944f4b0dc32e7939b1c97e02d8d1
SHA1: ea8ef0e93abae2997f5c630550b7dd7febeb5f93
SHA256: a488f9fe76dd3f66299165077f5e12fa0afa62d621f322b8356894171cdea5a3
SHA512: c6cf6def7ea1507e36909b2e3ef3558534ff84a55aa16582a5508646777b3ffe51a0284278f010a8636cb7214293a8e7a6160028b4c15d2faa06d24390a269e9
Description: multilingual terminal on Linux framebuffer
 Jfbterm (J Framebuffer Terminal/Multilingual Extension) can display
 multilingual text on Linux framebuffer.  It can display ISO-2022
 text such as ISO-8859-{1-11,13-16}, ISO-2022-{JP,CN,KR}, EUC-JP,
 EUC-KR (aka Wangsung), EUC-CN (aka GB2312 or CN-GB).
 It also supports UTF-8, and other coding system such as SHIFT_JIS by
 using iconv(3).
 .
 It supports 8bpp PACKED-PIXELS PSEUDOCOLOR and (15|16|24|32) bpp
 PACKED-PIXELS TRUECOLOR framebuffers.  It also supports 1bpp, 2bpp,
 (and vga16fb on arch i386).
Homepage: http://jfbterm.sourceforge.jp/

Package: live-boot-initramfs-tools
Priority: optional
Section: misc
Installed-Size: 34
Maintainer: Live Systems Maintainers <debian-live@lists.debian.org>
Architecture: all
Source: live-boot
Version: 4.0.2-1.drbl15
Replaces: live-boot-backend
Provides: live-boot-backend
Depends: busybox | busybox-initramfs, initramfs-tools, udev
Conflicts: live-boot-backend
Filename: pool/drbl/live-ubuntu-experimental/live-boot/live-boot-initramfs-tools_4.0.2-1.drbl15_all.deb
Size: 30648
MD5sum: 8c8d1f73e6bd123b3ed978e4165a494a
SHA1: d711dc5017f2f0f15c6612f5fbe19bdf656af6d7
SHA256: e55d5e902fcbd5efea8328c1c531f82c818b324cde29dac165c71cd0cb05f8e9
SHA512: 6c2071e5bf6825e9dd1935348f48f504aee4692cc2534ea1a9665abe32f2ae9a4c8b593711808052211b0586d80880a005934079ed425efbda235c8662ed6761
Description: Live System Boot Components (initramfs-tools backend)
 The Live Systems project maintains the components to build Debian based Live
 systems and the official Debian Live images themselves.
 .
 live-boot contains the components to configure a live system during the boot
 process (early userspace).
 .
 This package contains the initramfs-tools backend.
Homepage: http://live-systems.org/devel/live-boot/

Package: live-boot-doc
Priority: optional
Section: doc
Installed-Size: 56
Maintainer: Live Systems Maintainers <debian-live@lists.debian.org>
Architecture: all
Source: live-boot
Version: 4.0.2-1.drbl15
Filename: pool/drbl/live-ubuntu-experimental/live-boot/live-boot-doc_4.0.2-1.drbl15_all.deb
Size: 56950
MD5sum: 5e81ec2ba9ca5207467c67cbc60b25c4
SHA1: 49dfd98475f70a266293090eb9deb284f3a1442c
SHA256: b1c6a7c4733b3bce3c53a6d7700ca3e72c4a7240e4b68f29ff2e090fa8ffe1b3
SHA512: c641caa55e9d790eaf909218824419e6bf20f0df5be88c0c0279f85f9d5811e7a50858ad65a4084658ecc69ef8a739d70fa406c8a6330e1e9b594583479dec13
Description: Live System Boot Components (documentation)
 The Live Systems project maintains the components to build Debian based Live
 systems and the official Debian Live images themselves.
 .
 live-boot contains the components to configure a live system during the boot
 process (early userspace).
 .
 This package contains the documentation.
Homepage: http://live-systems.org/devel/live-boot/

Package: live-boot
Priority: optional
Section: misc
Installed-Size: 120
Maintainer: Live Systems Maintainers <debian-live@lists.debian.org>
Architecture: all
Version: 4.0.2-1.drbl15
Depends: live-boot-initramfs-tools | live-boot-backend
Recommends: live-boot-doc, live-tools, rsync, uuid-runtime
Suggests: curlftpfs, cryptsetup, httpfs2, unionfs-fuse, wget
Filename: pool/drbl/live-ubuntu-experimental/live-boot/live-boot_4.0.2-1.drbl15_all.deb
Size: 54806
MD5sum: 2acb0da8c0176365a538690d425dc84e
SHA1: d1f8c24c505f938e7127550b713d2dea6e459624
SHA256: f8a8193679785d8c7353b77e51569ec66d2fbf63c2340d3e4a1dfde3cf16b67c
SHA512: 9cec182c80ee05205fd2ec8f41104553f8c66e16484a83b0e8c9f08cf2388f6e17999d348b8f8133381d7d69435934596d0c3e777a23aa75358ef3c4894d2d2c
Description: Live System Boot Components
 The Live Systems project maintains the components to build Debian based Live
 systems and the official Debian Live images themselves.
 .
 live-boot contains the components to configure a live system during the boot
 process (early userspace).
 .
 In addition to live-boot, a backend for the initrd generation is required, such
 as live-boot-initramfs-tools.
Homepage: http://live-systems.org/devel/live-boot/

Package: live-build-cgi
Priority: optional
Section: misc
Installed-Size: 84
Maintainer: Live Systems Maintainers <debian-live@lists.debian.org>
Architecture: all
Source: live-build
Version: 4.0.5-1.drbl3
Depends: live-build (= 4.0.5-1.drbl3)
Recommends: apache2 | httpd, cron
Filename: pool/drbl/live-ubuntu-experimental/live-build/live-build-cgi_4.0.5-1.drbl3_all.deb
Size: 73448
MD5sum: cda79b4572bb67195562b39fcd64a35f
SHA1: 4382ee0ea021609c711eae289b37501cb0ed1d6f
SHA256: f2c2de6309ac6ea7964b53a2ce8346ca02f511be3162967372e0e154d5fd4a3d
SHA512: 4ae36cbe5712637c0f2f5366da1aa8fda42c61f7b059d13a13c6c97d0d914e64667a26fab0261cf7a064c4a27c101482326f17d52503fa947d1b2890599abdf7
Description: Live System Build Scripts (CGI frontend)
 The Live Systems project maintains the components to build Debian based Live
 systems and the official Debian Live images themselves.
 .
 live-build contains the components to build a live system from a configuration
 directory.
 .
 This package contains the CGI frontend (experimental!).
Homepage: http://live-systems.org/devel/live-build/

Package: live-build
Priority: optional
Section: misc
Installed-Size: 717
Maintainer: Live Systems Maintainers <debian-live@lists.debian.org>
Architecture: all
Version: 4.0.5-1.drbl3
Depends: debootstrap | cdebootstrap | cdebootstrap-static
Recommends: cpio, live-boot-doc, live-config-doc, live-manual-html | live-manual
Filename: pool/drbl/live-ubuntu-experimental/live-build/live-build_4.0.5-1.drbl3_all.deb
Size: 221586
MD5sum: 9a702951210f503688a714564c8f175a
SHA1: f49029ffe299c98dd0d3f9460634720b2d8f84a4
SHA256: 14a3da553adcffcdd378081199da4c075d7e1e03c9a1fb094ec56454f29aeed8
SHA512: b50bcc3f1bc9ba4065a5cf0c31ac97477ac7e59681237998ea6ee0224d4dff49114ce2ca6abbc6f242274550109d5ea36d39162414c1e83eb2fcba6bf62feb29
Description: Live System Build Components
 The Live Systems project maintains the components to build Debian based Live
 systems and the official Debian Live images themselves.
 .
 live-build contains the components to build a live system from a configuration
 directory.
Homepage: http://live-systems.org/devel/live-build/

Package: live-config-doc
Priority: optional
Section: doc
Installed-Size: 54
Maintainer: Live Systems Maintainers <debian-live@lists.debian.org>
Architecture: all
Source: live-config
Version: 4.0.4-1.drbl7
Filename: pool/drbl/live-ubuntu-experimental/live-config/live-config-doc_4.0.4-1.drbl7_all.deb
Size: 50712
MD5sum: 93babe2eb780a383e74aa6ee98c36d00
SHA1: 197e8fe1062423b8b74024d286558e7eac13fbc9
SHA256: b9f3dcb142bc4c00e1d1898c224f5afc3121203872a90e72824370a80f6caecc
SHA512: 55ac6a2bff210f6ac34d7f1921def7850168771dd797abd168daa865be3c82cb0148caf1ee3c83feb832a14c476d9c5b9db785887ade69614b48855cdf07c8b3
Description: Live System Configuration Components (documentation)
 live-config contains the components that configure a live system during the
 boot process (late userspace).
 .
 This package contains the documentation.
Homepage: http://live-systems.org/devel/live-config/

Package: live-config-systemd
Priority: optional
Section: misc
Installed-Size: 20
Maintainer: Live Systems Maintainers <debian-live@lists.debian.org>
Architecture: all
Source: live-config
Version: 4.0.4-1.drbl7
Replaces: live-config-backend
Provides: live-config-backend
Depends: systemd
Recommends: dbus
Conflicts: live-config-backend
Filename: pool/drbl/live-ubuntu-experimental/live-config/live-config-systemd_4.0.4-1.drbl7_all.deb
Size: 19240
MD5sum: 403457538f569ddfdd96d93593510954
SHA1: d7042307b7f3ee37a373c549992173ae5769ecef
SHA256: 43ed801d240f08fab204bcd309cd438cfd43616d70b37e07bc5f502ed8a3ad20
SHA512: d5f98571e98872f98cd919779a79448dcf94ef3fe0a0489aaee205e1b2b54830ed58f173f0b91dccd14ac88408b01299d7829d10c38642add2b33c95b9f003dd
Description: Live System Configuration Components (systemd backend)
 The Live Systems project maintains the components to build Debian based Live
 systems and the official Debian Live images themselves.
 .
 live-config contains the components to configure a live system during the boot
 process (late userspace).
 .
 This package contains the systemd backend.
Homepage: http://live-systems.org/devel/live-config/

Package: live-config-sysvinit
Priority: optional
Section: misc
Installed-Size: 23
Maintainer: Live Systems Maintainers <debian-live@lists.debian.org>
Architecture: all
Source: live-config
Version: 4.0.4-1.drbl7
Replaces: live-config-backend
Provides: live-config-backend
Depends: sysvinit-core | sysvinit (<< 2.88dsf-44)
Conflicts: live-config-backend
Filename: pool/drbl/live-ubuntu-experimental/live-config/live-config-sysvinit_4.0.4-1.drbl7_all.deb
Size: 20674
MD5sum: c8ef740500f7375350888c356bf0b172
SHA1: 13c68c124df308654f313941bbb34a6ea383e680
SHA256: a90c28813e188a287e00c5a606e4deb4bf00651083f68476fbdd4fe14d32e7c3
SHA512: 842b5d709ecacfc4c45b1b72749310428e2ec243670b8fbe6cd68e167b551a25d060f89caa52d6656de85da36cfd19ee0fd2909cf2885c5fd0b10b5bb9ef49af
Description: Live System Configuration Components (sysvinit backend)
 The Live Systems project maintains the components to build Debian based Live
 systems and the official Debian Live images themselves.
 .
 live-config contains the components to configure a live system during the boot
 process (late userspace).
 .
 This package contains the sysvinit backend.
Homepage: http://live-systems.org/devel/live-config/

Package: live-config-upstart
Priority: optional
Section: misc
Installed-Size: 21
Maintainer: Live Systems Maintainers <debian-live@lists.debian.org>
Architecture: all
Source: live-config
Version: 4.0.4-1.drbl7
Replaces: live-config-backend
Provides: live-config-backend
Depends: upstart
Conflicts: live-config-backend
Filename: pool/drbl/live-ubuntu-experimental/live-config/live-config-upstart_4.0.4-1.drbl7_all.deb
Size: 19580
MD5sum: 703d00e02565d9ef279f49a5a5a6e704
SHA1: 45f5c2496b2dbe9caf778342c55df13ef51df380
SHA256: e8514f16b56ad03d02384cef6838d908e7fad2b79bc2e013c5db62958f76f856
SHA512: f9720290a05e49136c2fefea7c333b1ebed68a650f78bf7149cd50818d79a586ec77528630e2440b716b894063be58176f0c41de054fc87acb2782cfbf9a8ae9
Description: Live System Configuration Scripts (upstart backend)
 live-config contains the scripts that configure a live system during the boot
 process (late userspace).
 .
 This package contains the upstart backend (experimental!).
Homepage: http://live-systems.org/devel/live-config/

Package: live-config
Priority: optional
Section: misc
Installed-Size: 85
Maintainer: Live Systems Maintainers <debian-live@lists.debian.org>
Architecture: all
Version: 4.0.4-1.drbl7
Depends: live-config-sysvinit | live-config-backend
Recommends: live-config-doc, live-tools, iproute2 | iproute, keyboard-configuration, locales | locales-all, user-setup, sudo
Suggests: pciutils, wget
Filename: pool/drbl/live-ubuntu-experimental/live-config/live-config_4.0.4-1.drbl7_all.deb
Size: 31268
MD5sum: 519870f8e0b29d9f218c459f9d8de166
SHA1: ad2f6227a859d160906e3cfae9f2e4782ebadb5f
SHA256: 3cb4fad71730cc5cc2cfcd301925583e4af3b4babb718b2a5ca11f3478e4bd52
SHA512: 5572e97e3e6dcee1904b540f0ed6bf2dbb8fffa99c7d39c8a3f3fc4eea72e6f5cb2316ea4ca6bf7eb0f3e828315fdbc01e7b7b99b966fe35c960096751b85656
Description: Live System Configuration Components
 The Live Systems project maintains the components to build Debian based Live
 systems and the official Debian Live images themselves.
 .
 live-config contains the components to configure a live system during the boot
 process (late userspace).
 .
 In addition to live-config, a backend for an init system is required, such as
 live-config-sysvinit.
Homepage: http://live-systems.org/devel/live-config/

Package: partclone-utils
Priority: optional
Section: utils
Installed-Size: 120
Maintainer: Steven Shiau <steven@nchc.org.tw>
Architecture: amd64
Version: 0.4.1-drbl1
Depends: libc6 (>= 2.14), libcap2 (>= 1:2.10)
Filename: pool/drbl/live-ubuntu-experimental/partclone-utils/partclone-utils_0.4.1-drbl1_amd64.deb
Size: 25634
MD5sum: 160586f4b8e1908a6d87039d9a63d0d5
SHA1: 241320ae1e0bd19d47f5eb2c32c6735ef38b1ad3
SHA256: ac53116066dcb5e04253929646d220223bca5f8004ac63794df7e6033951647f
SHA512: 01858036fbcc01a3b4152a8e47ebc4d71b60a10541bd2310d4bf3df14f3ccfbe97c222c3aca0a4ef0147bf46ee216b1180a6368ea46ed9bfe712b6e9fea856d7
Description: A utility that creates and optionally mounts a partclone image.
     Using imagemount, you can create a network block device that reads
     blocks from the partclone image.  Optionally, you can enable write
     support so that written changes are saved to a change file so that the
     original image remains unchanged.  Further, imagemount can also issue
     the mount(2) and umount[2](2) syscalls to mount and unmount the block
     device in the filesystem.
Homepage: http://www.idealworldinc.com/partclone-utils/

Package: partclone-utils
Priority: optional
Section: utils
Installed-Size: 92
Maintainer: Steven Shiau <steven@nchc.org.tw>
Architecture: i386
Version: 0.4.1-drbl1
Depends: libc6 (>= 2.7), libcap2 (>= 1:2.10)
Filename: pool/drbl/live-ubuntu-experimental/partclone-utils/partclone-utils_0.4.1-drbl1_i386.deb
Size: 29646
MD5sum: a52a596b27ffced21d8b20e27d5aa23a
SHA1: d39fec3fae831b6717a161bbc36d96ea7d965541
SHA256: c1054a7c4a37eb2509d782d719d002eaa9c33c47854a59205323573af62994c9
SHA512: 1821b8735ba34b22b8735eb76e15556a38453406e6ef464da14c30d8d3ced9a8c79d7ca66a3367bfecac556b02097f6c8bac13a85cfc95fb76c4054b4dc4e4d5
Description: A utility that creates and optionally mounts a partclone image.
     Using imagemount, you can create a network block device that reads
     blocks from the partclone image.  Optionally, you can enable write
     support so that written changes are saved to a change file so that the
     original image remains unchanged.  Further, imagemount can also issue
     the mount(2) and umount[2](2) syscalls to mount and unmount the block
     device in the filesystem.
Homepage: http://www.idealworldinc.com/partclone-utils/

Package: pbzip2
Priority: optional
Section: utils
Installed-Size: 788
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: i386
Version: 1.1.5-1drbl
Filename: pool/drbl/live-ubuntu-experimental/pbzip2/pbzip2_1.1.5-1drbl_i386.deb
Size: 361390
MD5sum: e138e61e1100c5d12965b0f8ba9596c7
SHA1: 0d813e3bac8a21dd040dc0016177ed78a40681da
SHA256: a466d591729b4f160ac32dd054281f6fb4fe0d3910fed2d1b92153c4f5a30698
SHA512: 5427dbc20447bb004812738db745e8503e312615d326e095522058376053870e7a33e89d0d816a17c43868f4fb2dd164a3fb66f141da03ea24bb6371e767f06c
Description: parallel bzip2 implementation
 pbzip2 is a parallel implementation of the bzip2 block-sorting file
 compressor that uses pthreads and achieves near-linear speedup on SMP
 machines. The output of this version is fully compatible with bzip2
 v1.0.2 (ie: anything compressed with pbzip2 can be decompressed with
 bzip2).
Homepage: http://compression.ca/pbzip2/

Package: plzip
Priority: extra
Section: utils
Installed-Size: 200
Maintainer: Eduard Bloch <blade@debian.org>
Architecture: amd64
Version: 0.5-1drbl
Depends: libc6 (>= 2.3.2), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.1.1)
Filename: pool/drbl/live-ubuntu-experimental/plzip/plzip_0.5-1drbl_amd64.deb
Size: 65612
MD5sum: 588194116c2e074a3f284d885d5f6079
SHA1: 60826a2f837d6171eea9dd32b0166899e5c1e56d
SHA256: 1e61c8ecfc38335021f0c680d1103f765aee0f5489f17852fb37d5b0dedb82fc
SHA512: 676bccaa59967e565fba64e171304fc6c7c311db17bbb3d538083f99d7b330fe9dd2e2ec1b636753b97b2c57abc69cc37d79faabd8d062b8b5b3342219d4963b
Description: Parallel Implementation of Lzip
 Plzip is a massively parallel (multi-threaded), lossless data compressor based on the LZMA algorithm, with very safe integrity checking and a user interface similar to the one of gzip or bzip2. Plzip uses the lzip file format; the files produced by plzip are fully compatible with lzip-1.4 or newer.
 .
 Plzip is intended for faster compression/decompression of big files on multiprocessor machines, which makes it specially well suited for distribution of big software files and large scale data archiving. On files big enough, plzip can use hundreds of processors.
Homepage: http://www.nongnu.org/lzip/plzip.html

Package: plzip
Priority: extra
Section: utils
Installed-Size: 148
Maintainer: Eduard Bloch <blade@debian.org>
Architecture: i386
Version: 0.5-1drbl
Depends: libc6 (>= 2.7-1), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.1.1)
Filename: pool/drbl/live-ubuntu-experimental/plzip/plzip_0.5-1drbl_i386.deb
Size: 63236
MD5sum: 58514ed79e2624405f16676b63e7e764
SHA1: 7d6a8fb1ed6963fbc99256c5696e0ab073cf9000
SHA256: 1c8a69380da5119b0a4fee50347f2197acef1a2fc5b1ea4195ac7c900dd58e9c
SHA512: 94737cd94ec40daa42cf1789479ce14c849ecb22c985d68c4e6f68fb38ecd4b617b0350ce81d163f413c921ed95b4dd6ffc27c414b2b1fcdacba817e07f348a4
Description: Parallel Implementation of Lzip
 Plzip is a massively parallel (multi-threaded), lossless data compressor based on the LZMA algorithm, with very safe integrity checking and a user interface similar to the one of gzip or bzip2. Plzip uses the lzip file format; the files produced by plzip are fully compatible with lzip-1.4 or newer.
 .
 Plzip is intended for faster compression/decompression of big files on multiprocessor machines, which makes it specially well suited for distribution of big software files and large scale data archiving. On files big enough, plzip can use hundreds of processors.
Homepage: http://www.nongnu.org/lzip/plzip.html

Package: pxz
Priority: optional
Section: misc
Installed-Size: 58
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Original-Maintainer: Holger Levsen <holger@debian.org>
Architecture: amd64
Version: 4.999.99~beta2+git4774800-1
Depends: libc6 (>= 2.3.4), libgomp1 (>= 4.2.1), liblzma5 (>= 5.1.1alpha+20120614)
Filename: pool/drbl/live-ubuntu-experimental/pxz/pxz_4.999.99~beta2+git4774800-1_amd64.deb
Size: 10394
MD5sum: 72458b2a35a4c151cd9b93f39dfa2d7e
SHA1: e17a4e2106a3f04aa9bb831b538e736cbfe138a4
SHA256: 5bcba008207453a267bef8ae17e7f4182a8fa83469ef910cb056a1ec71f03ad3
SHA512: cc60c901a0b951336547ab552d01989c1b18022cfd957f11f20119cd48518420fdb5e95e2f38361bd0f3a989d7cc196205ae9e332de8c1ca8653a84251e6359c
Description: parallel LZMA compressor using liblzma
 Parallel XZ is a compression utility that takes advantage of running LZMA
 compression of different parts of an input file on multiple cores and
 processors simultaneously. Its primary goal is to utilize all resources to
 speed up compression time with minimal possible influence on compression
 ratio.
Homepage: http://jnovy.fedorapeople.org/pxz/

Package: pxz
Priority: optional
Section: misc
Installed-Size: 57
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Original-Maintainer: Holger Levsen <holger@debian.org>
Architecture: i386
Version: 4.999.99~beta2+git4774800-1
Depends: libc6 (>= 2.7), libgomp1 (>= 4.2.1), liblzma5 (>= 5.1.1alpha+20120614)
Filename: pool/drbl/live-ubuntu-experimental/pxz/pxz_4.999.99~beta2+git4774800-1_i386.deb
Size: 11152
MD5sum: 28ed1d09bb8a259a349124a40285fd91
SHA1: d95b284e9a357455161fe590cf8d2bcc8d2ae82e
SHA256: e6f8233b93ba83814688d77cc8a7ea0aef9c7d9df787586eb5adc6ba43e0476f
SHA512: 509a2e79a50b80c6c73b7ada785ee1abbd5965c7fd12fd8e5d5f65eb845f4a757808ac40728eb5f5e7f9b666a59d11c5c1a4441839a1ab2c862338f681e1091a
Description: parallel LZMA compressor using liblzma
 Parallel XZ is a compression utility that takes advantage of running LZMA
 compression of different parts of an input file on multiple cores and
 processors simultaneously. Its primary goal is to utilize all resources to
 speed up compression time with minimal possible influence on compression
 ratio.
Homepage: http://jnovy.fedorapeople.org/pxz/

Package: gptsync
Priority: optional
Section: admin
Installed-Size: 72
Maintainer: Julien BLACHE <jblache@debian.org>
Architecture: amd64
Source: refit
Version: 0.14-2
Replaces: refit
Depends: libc6 (>= 2.2.5)
Filename: pool/drbl/live-ubuntu-experimental/refit/gptsync_0.14-2_amd64.deb
Size: 22578
MD5sum: 6398243d5d1bf33467553f4344fc4c2d
SHA1: 1947929628b95b7f3edad69c3bf9146e14e245c1
SHA256: 9a7f16a2b7ca23b0d0986391c78aa87b55af6757993948dcba3e208b95274092
SHA512: 15ad30647d3a617c35054885c0d94de560e02f9483d2f49a69c9236f19bbeffce8cd58dfc5dd69dc642c8100a619b3f2321f47ca224e1048beca185026275e5d
Description: GPT and MBR partition tables synchronisation tool
 gptsync is a utility to maintain an MBR partition table synchronised with
 a GPT partition table used as reference. The resulting MBR partition table
 can contain up to 4 partitions; extended partitions are not supported.
 .
 An MBR partition table is required to use legacy bootloaders (lilo, grub) on
 EFI-based (Extensible Firmware Interface) machines like the Intel-based Macs.
 gptsync is usually used in combination with the rEFIt boot menu on such
 machines.

Package: gptsync
Priority: optional
Section: admin
Installed-Size: 104
Maintainer: Julien BLACHE <jblache@debian.org>
Architecture: i386
Source: refit
Version: 0.14-2
Replaces: refit
Depends: libc6 (>= 2.2)
Filename: pool/drbl/live-ubuntu-experimental/refit/gptsync_0.14-2_i386.deb
Size: 21398
MD5sum: 8cb9e2e6a30754fcb95da574e03faa28
SHA1: 71a487632a007baa85902c0f4366aba3a2a3e1b4
SHA256: 095911d9c1767628fc2b7618b2b9cfcfc1bb085a39f803aa428b75f7172a6182
SHA512: 4352d7d9fffd068fed1f6cbcd02cafd8d5d3d994148bdf3cb7bd965dc3fb1f0aa2c797dc5ef4e6f4cc9eaffcaaff7faec79c90acd1bd9b49fb36d2d64ac5fa2b
Description: GPT and MBR partition tables synchronisation tool
 gptsync is a utility to maintain an MBR partition table synchronised with
 a GPT partition table used as reference. The resulting MBR partition table
 can contain up to 4 partitions; extended partitions are not supported.
 .
 An MBR partition table is required to use legacy bootloaders (lilo, grub) on
 EFI-based (Extensible Firmware Interface) machines like the Intel-based Macs.
 gptsync is usually used in combination with the rEFIt boot menu on such
 machines.

Package: gptsync
Priority: optional
Section: admin
Installed-Size: 84
Maintainer: Julien BLACHE <jblache@debian.org>
Architecture: kfreebsd-amd64
Source: refit
Version: 0.14-2
Replaces: refit
Depends: libc0.1 (>= 2.3)
Filename: pool/drbl/live-ubuntu-experimental/refit/gptsync_0.14-2_kfreebsd-amd64.deb
Size: 22628
MD5sum: 6ebe7e7d30d63c542592d0bdcdf6abf0
SHA1: 7ab04682d4ced3537d2ec2292bf8118c6762c3dd
SHA256: 4302b6eaa35bf7be72dc09e202d7f30ab938ff03264c9303afd7b57b76828e0a
SHA512: d3789ddeaa9379067a7b26d15d35e50ca58d4f8cb5a4005e5ad3c868028bd6fcac5ab058133894e414db52c90444f147e2dd8f68f7c9571c4dc1df2637650da4
Description: GPT and MBR partition tables synchronisation tool
 gptsync is a utility to maintain an MBR partition table synchronised with
 a GPT partition table used as reference. The resulting MBR partition table
 can contain up to 4 partitions; extended partitions are not supported.
 .
 An MBR partition table is required to use legacy bootloaders (lilo, grub) on
 EFI-based (Extensible Firmware Interface) machines like the Intel-based Macs.
 gptsync is usually used in combination with the rEFIt boot menu on such
 machines.

Package: refit
Priority: optional
Section: admin
Installed-Size: 1108
Maintainer: Julien BLACHE <jblache@debian.org>
Architecture: amd64
Version: 0.14-2
Depends: gptsync
Filename: pool/drbl/live-ubuntu-experimental/refit/refit_0.14-2_amd64.deb
Size: 456254
MD5sum: f9863d4879df412c990bd31cd3fa62e6
SHA1: 26147f99bccb1bcd06342c7716031d0aa0169df2
SHA256: 3df10329cd4aa59bfd502a147b68b78fdb208cef57b9dd3474b62ba63f431166
SHA512: 6a59cd42e54eb4bf6ed13524adc7342cd64d4b0dee9459103c12091645e802fb60543e858a8b224d255d29c832596f9c36d8152a3a5bfe6f0a00a530a901cdd7
Description: graphical boot menu for ia32 and x64 EFI systems
 rEFIt is a boot menu and maintenance toolkit for EFI-based (Extensible
 Firmware Interface) machines like the Intel-based Macs. You can use it
 to boot multiple operating systems easily, including triple-boot setups
 with Apple's Boot Camp.

Package: refit
Priority: optional
Section: admin
Installed-Size: 1172
Maintainer: Julien BLACHE <jblache@debian.org>
Architecture: i386
Version: 0.14-2
Depends: gptsync
Filename: pool/drbl/live-ubuntu-experimental/refit/refit_0.14-2_i386.deb
Size: 456774
MD5sum: 8554a3f5e27667c6931d84ec4eba8b03
SHA1: de2abbd284c626edad22f4bae5f5d0abfee27c03
SHA256: 11852461de44fba796223cc611e7cd322d3d18aa47ddbd8a5002f9ed9a2ca3bf
SHA512: b5454c53480a17b82b03994f4769374fdd17b46df60e8a73bacad0173fd21daf822a26379c6b7cdabbaf8f62ae8593c3540611a45fe047f87a647bb7b43d239d
Description: graphical boot menu for ia32 and x64 EFI systems
 rEFIt is a boot menu and maintenance toolkit for EFI-based (Extensible
 Firmware Interface) machines like the Intel-based Macs. You can use it
 to boot multiple operating systems easily, including triple-boot setups
 with Apple's Boot Camp.

Package: refit
Priority: optional
Section: admin
Installed-Size: 1100
Maintainer: Julien BLACHE <jblache@debian.org>
Architecture: kfreebsd-amd64
Version: 0.14-2
Depends: gptsync
Filename: pool/drbl/live-ubuntu-experimental/refit/refit_0.14-2_kfreebsd-amd64.deb
Size: 449554
MD5sum: f30e8379505da50dd1c933e62a472ce2
SHA1: ef713a9acb9b8dcbd6fda1ba52d5ca6c69516166
SHA256: c6ccfdacb533453a11759ada2b432a67517bdf7a2bdbf186c1d565355f46d59e
SHA512: 1bafd83f8f12356c1143be736ab287559c2ed15b55c4214758182e06ed9280ac871de77d358a1d0797b8268c7382ef852ebdf1d4e1ab0892c767f25e7f88ddc7
Description: graphical boot menu for ia32 and x64 EFI systems
 rEFIt is a boot menu and maintenance toolkit for EFI-based (Extensible
 Firmware Interface) machines like the Intel-based Macs. You can use it
 to boot multiple operating systems easily, including triple-boot setups
 with Apple's Boot Camp.

Package: tcplay
Priority: optional
Section: misc
Installed-Size: 97
Maintainer: Steven Shiau <steven@nchc.org.tw>
Architecture: amd64
Version: 0.10-7.drbl1
Depends: libc6 (>= 2.4), libdevmapper1.02.1 (>= 2:1.02.36), libgcrypt11 (>= 1.4.5), libssl1.0.0 (>= 1.0.0), libuuid1 (>= 2.16)
Filename: pool/drbl/live-ubuntu-experimental/tcplay/tcplay_0.10-7.drbl1_amd64.deb
Size: 29960
MD5sum: 58b91930233b9a478b163f080d6ea981
SHA1: 74f748804b99dcfb251bb0631d14a4a03b2b4839
SHA256: fb238e44b849cced48dc86c4e564c492fe53497fb79eab6a5cd2993ce2b61c3b
SHA512: 14e117785715deabb49aa1d3ec508e83e211d713c2bfe7322ae80f4e72a29427434a2523adfb2789589ea4d8f468d0396775d2da2b314a49e49baeb02535d199
Description: create and open/map TrueCrypt-compatible volumes
 Tcplay is a free (BSD-licensed), pretty much fully featured
 (including multiple keyfiles, cipher cascades, etc) and stable
 TrueCrypt implementation.
 This implementation supports mapping (opening) both system and
 normal TrueCrypt volumes, as well as opening hidden volumes and
 opening an outer volume while protecting a hidden volume. There is
 also support to create volumes, including hidden volumes, etc.
Homepage: https://github.com/bwalex/tc-play

Package: tcplay
Priority: optional
Section: misc
Installed-Size: 94
Maintainer: Steven Shiau <steven@nchc.org.tw>
Architecture: i386
Version: 0.10-7.drbl1
Depends: libc6 (>= 2.4), libdevmapper1.02.1 (>= 2:1.02.36), libgcrypt11 (>= 1.4.5), libssl1.0.0 (>= 1.0.0), libuuid1 (>= 2.16)
Filename: pool/drbl/live-ubuntu-experimental/tcplay/tcplay_0.10-7.drbl1_i386.deb
Size: 29596
MD5sum: 44bd34e741794b864fd65c17a13b82d7
SHA1: 9ff2115fd7fdd1e20378f5079a585efa4277da4b
SHA256: 4247ae7401ca1d50c04909138eb4421b453d10e77681656ba3b4100d4ac02b79
SHA512: d7e2ec4b42e1522dbd4524b48eb9b6699ef463a784f4d4660be716038da910d21a724a686c861e9cdf2c9beea9fe8272ee90ab4575e36fc7fe42d9fc195f5377
Description: create and open/map TrueCrypt-compatible volumes
 Tcplay is a free (BSD-licensed), pretty much fully featured
 (including multiple keyfiles, cipher cascades, etc) and stable
 TrueCrypt implementation.
 This implementation supports mapping (opening) both system and
 normal TrueCrypt volumes, as well as opening hidden volumes and
 opening an outer volume while protecting a hidden volume. There is
 also support to create volumes, including hidden volumes, etc.
Homepage: https://github.com/bwalex/tc-play

Package: ufsutils
Priority: optional
Section: utils
Installed-Size: 354
Maintainer: GNU/kFreeBSD Maintainers <debian-bsd@lists.debian.org>
Architecture: amd64
Version: 8.2-3
Provides: fsck-backend
Depends: libbsd0 (>= 0.2.0), libc6 (>= 2.4), libedit2 (>= 2.11-20080614-1)
Conflicts: hurd
Filename: pool/drbl/live-ubuntu-experimental/ufsutils/ufsutils_8.2-3_amd64.deb
Size: 162614
MD5sum: c62a92fb40faa7b2c1df9a4ff2b9a4ed
SHA1: e3efe3adf4f83684c385d5e08db4004a01efcfcb
SHA256: 362ee4fe9cfd9e897f9169e110aa689075dcb296d2f7e2220c79570b8bacb3cb
SHA512: 075595b50be01f01d2f5bf89f67f7ddb32394ea9ed9f7dd85bf3113027ca0f854ca3540859377d997433f7d2a5efca3f75b08ec998cd00964a62c4f67f182ead
Description: UFS filesystems utilities
 Utilities to manage the UFS filesystem, mostly used in BSD or derived
 operating systems. This include FFS, UFS and UFS2.
 .
 The following utilities are provided:
  * mkfs.ufs
  * fsck.ufs
  * fsdb.ufs
  * dumpfs.ufs
  * growfs.ufs
  * tunefs.ufs
  * badsect.ufs
  * ffsinfo

Package: ufsutils
Priority: optional
Section: utils
Installed-Size: 375
Maintainer: GNU/kFreeBSD Maintainers <debian-bsd@lists.debian.org>
Architecture: i386
Version: 8.2-3
Provides: fsck-backend
Depends: libbsd0 (>= 0.2.0), libc6 (>= 2.4), libedit2 (>= 2.11-20080614-1)
Conflicts: hurd
Filename: pool/drbl/live-ubuntu-experimental/ufsutils/ufsutils_8.2-3_i386.deb
Size: 169058
MD5sum: f7cc51186b807114a4dad36942d138c6
SHA1: 96bdc9a9ee933716290adcf7954535c9261c3d6a
SHA256: 3e6c87572bf5ee8aaccb8813c12cdfe592146311dc4018fd1c8d33d0ce17b2cf
SHA512: 0a6b5f8140309b45cd9c0e87ad301366b83ffda04973f4846e9a436f09c90a925b67d503aba6c2c425f999ed3a4d919b4f6c808178b816dc2e4b7cc11fe8cad4
Description: UFS filesystems utilities
 Utilities to manage the UFS filesystem, mostly used in BSD or derived
 operating systems. This include FFS, UFS and UFS2.
 .
 The following utilities are provided:
  * mkfs.ufs
  * fsck.ufs
  * fsdb.ufs
  * dumpfs.ufs
  * growfs.ufs
  * tunefs.ufs
  * badsect.ufs
  * ffsinfo

Package: kexec-tools
Priority: optional
Section: admin
Installed-Size: 312
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Original-Maintainer: Khalid Aziz <khalid@debian.org>
Architecture: i386
Version: 1:2.0.1-2ubuntu1-1drbl
Depends: libc6 (>= 2.7), debconf (>= 0.5) | debconf-2.0, debconf, initramfs-tools
Filename: pool/drbl/live-ubuntu-experimental/kexec-tools/kexec-tools_2.0.1-2ubuntu1-1drbl_i386.deb
Size: 77668
MD5sum: b758e263f27deea9acd3af4ffcc73629
SHA1: a26e7cf9a5eae5da38aecbbbe240c1104b65a841
SHA256: dd4293340a686a0548e484ad6ad53b45e4b980f56beac8dd91ae0341b90183d2
SHA512: 7419f2543d598d602a58b49829c82d62fdf5d64ef032e2a05520226574d91665e950b5b0c01c05915c82c215cb8d43c2649e1ed3925efae68485579d1c6f9246
Description: kexec tool for kexec reboots
 This tool is used to load a kernel in memory and reboot into the kernel
 loaded in memory using the kexec system call.

Package: ezio
Priority: optional
Section: utils
Installed-Size: 221
Maintainer: Steven Shiau <steven@clonezilla.org>
Architecture: i386
Version: 20170401-drbl1
Depends: libboost-chrono1.62.0, libboost-random1.62.0, libboost-system1.62.0, libc6 (>= 2.3.6-6~), libgcc1 (>= 1:3.0), libssl1.1 (>= 1.1.0), libstdc++6 (>= 5.2), libtorrent-rasterbar9 (>= 1.1.1)
Filename: pool/drbl/live-ubuntu-experimental/ezio/ezio_20170401-drbl1_i386.deb
Size: 60772
MD5sum: f75c7e2e54f0243e49816ae0e3657dd0
SHA1: f8ed04599f62e5d19a0f900d98fdafd995ec70ba
SHA256: 47f90608af345ad8fdf34c497a3a914b0e51ce097fdc9b6de6e0b9c33b28cb80
SHA512: f94788bc1274723a39d021aed765d49939e590b72d2aec1ab6fff6f1745507386b11247875e0125fbe68ed2950fd6fdb152b91cbdb00ad547716a3cc574ca92b
Description: Bittorrent-based Disk Cloner
 Ezio is a Bittorrent-based Disk Cloner. It's heavily
 under development. Do not try it unless you know
 what you are doing.
Homepage: https://github.com/tjjh89017/ezio.git

Package: ezio-dbg
Priority: optional
Section: utils
Installed-Size: 656
Maintainer: Steven Shiau <steven@clonezilla.org>
Architecture: amd64
Source: ezio
Version: 20170401-drbl1
Filename: pool/drbl/live-ubuntu-experimental/ezio/ezio-dbg_20170401-drbl1_amd64.deb
Size: 463692
MD5sum: 75206b0a27bfcbf76f9238716e5b05d7
SHA1: aac0c2665862038b396048904807cd18a4403773
SHA256: 7971cd869e99100f21321046783353882990a7b9a856099c71c8b2b93a68faa1
SHA512: 56be09945a0eded2ddadfd2da08ff97007562277c53bbefcf8d375ae557bcb32ab2ba1cb353edafcc12704d7ebe178ef9d3cae45bcec6a75508703b865b056ad
Description: Bittorrent-based Disk Cloner
 Ezio is a Bittorrent-based Disk Cloner. It's heavily
 under development. Do not try it unless you know
 what you are doing.
Homepage: https://github.com/tjjh89017/ezio.git
Build-Ids: dbc0c780357fe438ea3fb485f89aa1ad4217200f

Package: ezio-dbg
Priority: optional
Section: utils
Installed-Size: 640
Maintainer: Steven Shiau <steven@clonezilla.org>
Architecture: i386
Source: ezio
Version: 20170401-drbl1
Filename: pool/drbl/live-ubuntu-experimental/ezio/ezio-dbg_20170401-drbl1_i386.deb
Size: 464518
MD5sum: 21a7e9a0d8bd9136412dc9d0a21fddf0
SHA1: 3df863ccb50b326ebf3245f43f9620b4daa05bce
SHA256: 70d362c50ed06a4868d02cfedac36392c8e29e6440c1cc884dfd80189410900c
SHA512: f65d107f3b608a2182a40a697d0acc4b1d20a5931545f8286100e9b9d44c5f1821e3b2efaee3b5af484ad03c6ca1b1721b618129d929a3d667291b1aff059cf6
Description: Bittorrent-based Disk Cloner
 Ezio is a Bittorrent-based Disk Cloner. It's heavily
 under development. Do not try it unless you know
 what you are doing.
Homepage: https://github.com/tjjh89017/ezio.git
Build-Ids: fea92c6cf5128aaa79df0cfeda0c2630d5cec06c

Package: ezio-static
Priority: optional
Section: utils
Installed-Size: 7980
Maintainer: Steven Shiau <steven@clonezilla.org>
Architecture: i386
Source: ezio
Version: 20170401-drbl1
Filename: pool/drbl/live-ubuntu-experimental/ezio/ezio-static_20170401-drbl1_i386.deb
Size: 2740786
MD5sum: e092850eaa12d9314364479f5c0fecea
SHA1: 9f76f2c0dd4964a4dc48500e91852e340867a74e
SHA256: 43934267f8d4729808da63e07dcc2c4f4b259053f2dff9dcbcf014de522993ed
SHA512: 826e27f0c4ae6277db791d2c63707005e71276eb78b767e5784eccfbe39f8d502eaefa8c14332d9cbb94cf52daea4ddbf7b1d08b42f9bc019092d426245c714f
Description: Standalone bittorrent-based Disk Cloner
 Ezio-static is a standalone bittorrent-based Disk Cloner.
 It's heavily under development. Do not try it unless you know
 what you are doing.
Homepage: https://github.com/tjjh89017/ezio.git

Package: ezio-static
Priority: optional
Section: utils
Installed-Size: 7667
Maintainer: Steven Shiau <steven@clonezilla.org>
Architecture: amd64
Source: ezio
Version: 20170401-drbl1
Filename: pool/drbl/live-ubuntu-experimental/ezio/ezio-static_20170401-drbl1_amd64.deb
Size: 2570600
MD5sum: db4cb766fea4060d3c3f51320682363f
SHA1: 5634f0e8eb061b13ad322e2e96e7d3703b4d9a87
SHA256: 74c29425b7ab3b06deec79c25fce7f10724c9fbc8ea30a3bc9597abeb27febc2
SHA512: 3e7f577fc5f7bcdc0b6459f3876e822a083e6bcbc0ed86aeca95b698e37df1d1080a6c7d2ce2f3b28885fe85b491755e9883937af5fe2de4588428b8cc0b2b0c
Description: Standalone bittorrent-based Disk Cloner
 Ezio-static is a standalone bittorrent-based Disk Cloner.
 It's heavily under development. Do not try it unless you know
 what you are doing.
Homepage: https://github.com/tjjh89017/ezio.git

Package: ezio
Priority: optional
Section: utils
Installed-Size: 230
Maintainer: Steven Shiau <steven@clonezilla.org>
Architecture: amd64
Version: 20170401-drbl1
Depends: libboost-chrono1.62.0, libboost-random1.62.0, libboost-system1.62.0, libc6 (>= 2.14), libgcc1 (>= 1:3.0), libssl1.1 (>= 1.1.0), libstdc++6 (>= 5.2), libtorrent-rasterbar9 (>= 1.1.1)
Filename: pool/drbl/live-ubuntu-experimental/ezio/ezio_20170401-drbl1_amd64.deb
Size: 53990
MD5sum: 5dde17fb6468f63fc7e5be984189fb72
SHA1: 20b386cce832f8aaac5187ab5622e64e3cfd2bf7
SHA256: f632882374c414f5393c5ea68211691a5d958c20b223a1b31ac072e517666997
SHA512: eb54a886a9be0caba047d6da080e540c79c2621ab7d9319fb6035c141d1ed15b73212f446a40d6c59be287820d1c94396fe296d69527d81ef73e94f4e3c7aaf0
Description: Bittorrent-based Disk Cloner
 Ezio is a Bittorrent-based Disk Cloner. It's heavily
 under development. Do not try it unless you know
 what you are doing.
Homepage: https://github.com/tjjh89017/ezio.git

Package: dnsmasq-base
Priority: optional
Section: net
Installed-Size: 879
Maintainer: Simon Kelley <simon@thekelleys.org.uk>
Architecture: amd64
Source: dnsmasq
Version: 2.77-1.drbl1
Replaces: dnsmasq (<< 2.63-1~)
Depends: adduser, libc6 (>= 2.14), libdbus-1-3 (>= 1.9.14), libgmp10, libhogweed4, libidn11 (>= 1.13), libnetfilter-conntrack3, libnettle6 (>= 3.3), libnfnetlink0
Recommends: dns-root-data
Breaks: dnsmasq (<< 2.63-1~)
Filename: pool/drbl/live-ubuntu-experimental/dnsmasq/dnsmasq-base_2.77-1.drbl1_amd64.deb
Size: 425016
MD5sum: 0a77cd63ddee436e8e8440b64069de17
SHA1: e4d258a285d63f0138294d03de4656591e6ab07b
SHA256: a6fc6aa7d0fe47b33c9170467e6491e444a5d3ee7b2a269584da7b793a98f917
SHA512: ae8e1368a0565224f997823b9d9a6ade8bfa7ac8a0f894fd409e73c577af7951a9bc6140762d9265df1a45c8d573546af3895f7643e8c20c738d8c3bf9b269ad
Description: Small caching DNS proxy and DHCP/TFTP server
 This package contains the dnsmasq executable and documentation, but
 not the infrastructure required to run it as a system daemon. For
 that, install the dnsmasq package.

Package: dnsmasq-base
Priority: optional
Section: net
Installed-Size: 869
Maintainer: Simon Kelley <simon@thekelleys.org.uk>
Architecture: amd64
Source: dnsmasq (2.76-5)
Version: 2.76-5+b1
Replaces: dnsmasq (<< 2.63-1~)
Depends: adduser, libc6 (>= 2.14), libdbus-1-3 (>= 1.9.14), libgmp10, libhogweed4, libidn11 (>= 1.13), libnetfilter-conntrack3, libnettle6 (>= 3.3), libnfnetlink0
Recommends: dns-root-data
Breaks: dnsmasq (<< 2.63-1~)
Filename: pool/drbl/live-ubuntu-experimental/dnsmasq/dnsmasq-base_2.76-5+b1_amd64.deb
Size: 420600
MD5sum: 70120ace909f9762925d898c1dc26ca6
SHA1: 7f0cb8d881b5fa09f8e22824e49d0da7791b1a7a
SHA256: 4679bb6044952d223d4fb7b246b5cf333d89e26cef13e02825c87774c617e01c
SHA512: db3bbd160d331d8f78a067d4f1140b79b3679aa4a5099a8d93e41af079f1b9f4a2480626bc5883adac2b0bac2511732ae554c2dfe428f9085341e72ec90fbc98
Description: Small caching DNS proxy and DHCP/TFTP server
 This package contains the dnsmasq executable and documentation, but
 not the infrastructure required to run it as a system daemon. For
 that, install the dnsmasq package.

Package: dnsmasq-utils
Priority: optional
Section: net
Installed-Size: 61
Maintainer: Simon Kelley <simon@thekelleys.org.uk>
Architecture: amd64
Source: dnsmasq
Version: 2.77-1.drbl1
Depends: libc6 (>= 2.14)
Conflicts: dnsmasq (<< 2.40)
Filename: pool/drbl/live-ubuntu-experimental/dnsmasq/dnsmasq-utils_2.77-1.drbl1_amd64.deb
Size: 23672
MD5sum: d2b8a553aaa2943278e1c00603b55fb0
SHA1: 234adb8030b5a6e7dcf358901aaa468b3d2155b3
SHA256: 36bb4c39f733e8e7255366e512edddb2539724f26a68d65058e9764d6a709137
SHA512: d7ef38c8256ff1bb3df6bf1a875e286a4ee5baa3fec1b81b8553d2b2952213a61eff82a94f86465b3502baf636f075b285eb80d4713d377f9cb1f7afb9c9bf4f
Description: Utilities for manipulating DHCP leases
 Small utilities to query a DHCP server's lease database and
 remove leases from it. These programs are distributed with dnsmasq
 and may not work correctly with other DHCP servers.

Package: dnsmasq-base
Priority: optional
Section: net
Installed-Size: 898
Maintainer: Simon Kelley <simon@thekelleys.org.uk>
Architecture: i386
Source: dnsmasq (2.76-5)
Version: 2.76-5+b1
Replaces: dnsmasq (<< 2.63-1~)
Depends: adduser, libc6 (>= 2.11), libdbus-1-3 (>= 1.9.14), libgmp10, libhogweed4, libidn11 (>= 1.13), libnetfilter-conntrack3, libnettle6 (>= 3.3), libnfnetlink0
Recommends: dns-root-data
Breaks: dnsmasq (<< 2.63-1~)
Filename: pool/drbl/live-ubuntu-experimental/dnsmasq/dnsmasq-base_2.76-5+b1_i386.deb
Size: 428480
MD5sum: 1ef153e96d0bc34fa62344c22a761491
SHA1: 4e67161a17623e087efe05387fc378bf3ba44ad5
SHA256: fc0aa644126499b0133aac0ed752bc286cee630095f62caf31375b9fbe8282bc
SHA512: bde53f5e928a89e39c9df47dfb1827b1d164c512ef738baf17ecaee258ca91a2788be3e1d6ed9f8c9e00c8899c0990438c79fdd7983a83acce454dcee89593ea
Description: Small caching DNS proxy and DHCP/TFTP server
 This package contains the dnsmasq executable and documentation, but
 not the infrastructure required to run it as a system daemon. For
 that, install the dnsmasq package.

Package: dnsmasq
Priority: optional
Section: net
Installed-Size: 72
Maintainer: Simon Kelley <simon@thekelleys.org.uk>
Architecture: all
Version: 2.77-1.drbl1
Depends: netbase, dnsmasq-base (>= 2.77-1.drbl1), init-system-helpers (>= 1.18~), lsb-base (>= 3.0-6)
Suggests: resolvconf
Conflicts: resolvconf (<< 1.15)
Filename: pool/drbl/live-ubuntu-experimental/dnsmasq/dnsmasq_2.77-1.drbl1_all.deb
Size: 16006
MD5sum: b65f0f4057b93f4393a25a1b392e2e3b
SHA1: 8878a8c480a8acf893709eb061c3ae36d050679e
SHA256: 91c0458c2655b4777b43f609820005e83b7bcf1bfdbfbb758912e4436abbceb6
SHA512: 9aed05fa7790799a7f0aa4929f2062af62328981f2932eb70dd476615931f88f2834a35fec4329367cadbd61ad803dbb705e2c8f78f189d6841e272ed3ff4a9e
Description: Small caching DNS proxy and DHCP/TFTP server
 Dnsmasq is a lightweight, easy to configure, DNS forwarder and DHCP
 server. It is designed to provide DNS and optionally, DHCP, to a
 small network. It can serve the names of local machines which are
 not in the global DNS. The DHCP server integrates with the DNS
 server and allows machines with DHCP-allocated addresses
 to appear in the DNS with names configured either in each host or
 in a central configuration file. Dnsmasq supports static and dynamic
 DHCP leases and BOOTP/TFTP for network booting of diskless machines.

Package: dnsmasq-utils
Priority: optional
Section: net
Installed-Size: 90
Maintainer: Simon Kelley <simon@thekelleys.org.uk>
Architecture: amd64
Source: dnsmasq (2.76-5)
Version: 2.76-5+b1
Depends: libc6 (>= 2.14)
Conflicts: dnsmasq (<< 2.40)
Filename: pool/drbl/live-ubuntu-experimental/dnsmasq/dnsmasq-utils_2.76-5+b1_amd64.deb
Size: 33166
MD5sum: 71a4608eae00a7653195fec30c7ef885
SHA1: 94e504a75855f4b6f654377463ba152349e79434
SHA256: d4ec59eab72a96feb3d17d995ee7e03651dd7d1e616d1c8cf6228115ebba89bd
SHA512: 0c7ad7e294fb51634ec6df3495747ad307e16c49f29ad443dcd44e6bfc5a1f266807025cc9a1b0be53f407cc1b7fb1054d22db60d4aea2e7a9cdd7e0bc60b8ff
Description: Utilities for manipulating DHCP leases
 Small utilities to query a DHCP server's lease database and
 remove leases from it. These programs are distributed with dnsmasq
 and may not work correctly with other DHCP servers.

Package: dnsmasq-base
Priority: optional
Section: net
Installed-Size: 908
Maintainer: Simon Kelley <simon@thekelleys.org.uk>
Architecture: i386
Source: dnsmasq
Version: 2.77-1.drbl1
Replaces: dnsmasq (<< 2.63-1~)
Depends: adduser, libc6 (>= 2.11), libdbus-1-3 (>= 1.9.14), libgmp10, libhogweed4, libidn11 (>= 1.13), libnetfilter-conntrack3, libnettle6 (>= 3.3), libnfnetlink0
Recommends: dns-root-data
Breaks: dnsmasq (<< 2.63-1~)
Filename: pool/drbl/live-ubuntu-experimental/dnsmasq/dnsmasq-base_2.77-1.drbl1_i386.deb
Size: 432764
MD5sum: e332e06abc0f5889393913251034250c
SHA1: cc8af1f936d21a56e97a46682074176b5f43b83b
SHA256: 03e03302cfd781a0f717fda98cec4309112211a3dc9907e871b9ab550cb7d42d
SHA512: c1845b8f8588ddc7dcf0f9c76df626eb0fcc213474327fd6e28c35bf0972ce87f7c756a10cf89ecab623be90ae05923f444f04218545465f6fa023a4269aad42
Description: Small caching DNS proxy and DHCP/TFTP server
 This package contains the dnsmasq executable and documentation, but
 not the infrastructure required to run it as a system daemon. For
 that, install the dnsmasq package.

Package: dnsmasq-utils
Priority: optional
Section: net
Installed-Size: 56
Maintainer: Simon Kelley <simon@thekelleys.org.uk>
Architecture: i386
Source: dnsmasq
Version: 2.77-1.drbl1
Depends: libc6 (>= 2.4)
Conflicts: dnsmasq (<< 2.40)
Filename: pool/drbl/live-ubuntu-experimental/dnsmasq/dnsmasq-utils_2.77-1.drbl1_i386.deb
Size: 24196
MD5sum: a73ca85970062ef7308ddad72aafd024
SHA1: 8bfa9211f53ea5b4074a10ba483047511a1e842c
SHA256: b32e91ecd76eb2627c2c5d9e429c646b9ce08cb3c7e1f47e52cc97a0868e45d1
SHA512: 67eeae54ae6abd79a09058396a816133cd4883cff5163c62fbed8541c6f72be7be66a6ace8bb361f4f931d2b580bb04dbfac538c058ce6088e20fc7e7f009944
Description: Utilities for manipulating DHCP leases
 Small utilities to query a DHCP server's lease database and
 remove leases from it. These programs are distributed with dnsmasq
 and may not work correctly with other DHCP servers.

Package: dnsmasq-utils
Priority: optional
Section: net
Installed-Size: 78
Maintainer: Simon Kelley <simon@thekelleys.org.uk>
Architecture: i386
Source: dnsmasq (2.76-5)
Version: 2.76-5+b1
Depends: libc6 (>= 2.4)
Conflicts: dnsmasq (<< 2.40)
Filename: pool/drbl/live-ubuntu-experimental/dnsmasq/dnsmasq-utils_2.76-5+b1_i386.deb
Size: 33086
MD5sum: 4faac22ec9f1d166f32ca099fdc57539
SHA1: 5dd95da5fa3c91595cb7ca85ac1b3c938fee640c
SHA256: 770be8b58933455faba6cb7ee9843649e1b0991e6cd678688ba287e9ed0f6685
SHA512: 5444123764cdd1cae637fe277b763ee49bee6569c46177ff19e7f21c627b14f28334e637e9ee65762c5e150ede5558bafc4e9f812f0d30151ab43a546c182462
Description: Utilities for manipulating DHCP leases
 Small utilities to query a DHCP server's lease database and
 remove leases from it. These programs are distributed with dnsmasq
 and may not work correctly with other DHCP servers.

Package: dnsmasq-base
Priority: optional
Section: net
Installed-Size: 880
Maintainer: Simon Kelley <simon@thekelleys.org.uk>
Architecture: amd64
Source: dnsmasq
Version: 2.77-2.drbl1
Replaces: dnsmasq (<< 2.63-1~)
Depends: adduser, libc6 (>= 2.14), libdbus-1-3 (>= 1.9.14), libgmp10, libhogweed4, libidn11 (>= 1.13), libnetfilter-conntrack3, libnettle6 (>= 3.3), libnfnetlink0
Recommends: dns-root-data
Breaks: dnsmasq (<< 2.63-1~)
Filename: pool/drbl/live-ubuntu-experimental/dnsmasq/dnsmasq-base_2.77-2.drbl1_amd64.deb
Size: 425008
MD5sum: df8217b550761b85383b54cd8735e319
SHA1: e0b94fc0ea74673943591f58a35e715981aec5d5
SHA256: fd887d8e342abc8a25f2ff37a1add04967e193aebaf39bba3975c80884e6ee3c
SHA512: 631cf796a068bc4728206fdf0b32dd6f4fabfb382968a7307aec470ea61a582c4d3e7b469156fa654074d0d871e8a96c6bc319aef1aa8f77a10c092aee1c74f1
Description: Small caching DNS proxy and DHCP/TFTP server
 This package contains the dnsmasq executable and documentation, but
 not the infrastructure required to run it as a system daemon. For
 that, install the dnsmasq package.

Package: dnsmasq-utils
Priority: optional
Section: net
Installed-Size: 62
Maintainer: Simon Kelley <simon@thekelleys.org.uk>
Architecture: amd64
Source: dnsmasq
Version: 2.77-2.drbl1
Depends: libc6 (>= 2.14)
Conflicts: dnsmasq (<< 2.40)
Filename: pool/drbl/live-ubuntu-experimental/dnsmasq/dnsmasq-utils_2.77-2.drbl1_amd64.deb
Size: 23706
MD5sum: 56c39630974d6d5f2e3c9568112e0c20
SHA1: 8afb6588bf7bb52b641b0a39d073a7918363634f
SHA256: fee9d7b764cebe24ae8480e1bf8e6e3fd113f63211ad591b95038edc031a03f5
SHA512: 2615da651ea80de6c69a76b29088d541549dcc43f1308960d1d1ea7db8a41f746777fc8d232abe7d6575c5bace5a96d2f3f49da7ac97ac3907e6e9916e9ef34a
Description: Utilities for manipulating DHCP leases
 Small utilities to query a DHCP server's lease database and
 remove leases from it. These programs are distributed with dnsmasq
 and may not work correctly with other DHCP servers.

Package: dnsmasq
Priority: optional
Section: net
Installed-Size: 71
Maintainer: Simon Kelley <simon@thekelleys.org.uk>
Architecture: all
Version: 2.76-5
Depends: netbase, dnsmasq-base (>= 2.76-5), init-system-helpers (>= 1.18~)
Suggests: resolvconf
Conflicts: resolvconf (<< 1.15)
Filename: pool/drbl/live-ubuntu-experimental/dnsmasq/dnsmasq_2.76-5_all.deb
Size: 15944
MD5sum: ef1d61b77232b16993b6ee8ca27d14e1
SHA1: d210d57b6f32a7ac4d63513024a2777e5c732c65
SHA256: 7f347b2eb0af66227e78cd77a17fc0a047c49ec210958c17886507ad17ac174e
SHA512: f21ff8722a2f758d2d77072149df19a5396b8d3f856ad1896dd6b62f36334a7e85b9379774c13821ec69162c54fd2f938c430e41117ff03cf4e23a8373e5b97a
Description: Small caching DNS proxy and DHCP/TFTP server
 Dnsmasq is a lightweight, easy to configure, DNS forwarder and DHCP
 server. It is designed to provide DNS and optionally, DHCP, to a
 small network. It can serve the names of local machines which are
 not in the global DNS. The DHCP server integrates with the DNS
 server and allows machines with DHCP-allocated addresses
 to appear in the DNS with names configured either in each host or
 in a central configuration file. Dnsmasq supports static and dynamic
 DHCP leases and BOOTP/TFTP for network booting of diskless machines.

Package: dnsmasq
Priority: optional
Section: net
Installed-Size: 72
Maintainer: Simon Kelley <simon@thekelleys.org.uk>
Architecture: all
Version: 2.77-2.drbl1
Depends: netbase, dnsmasq-base (>= 2.77-2.drbl1), init-system-helpers (>= 1.18~), lsb-base (>= 3.0-6)
Suggests: resolvconf
Conflicts: resolvconf (<< 1.15)
Filename: pool/drbl/live-ubuntu-experimental/dnsmasq/dnsmasq_2.77-2.drbl1_all.deb
Size: 16034
MD5sum: 43ee9a8350a53d5fa78178b5eaa3f9a9
SHA1: c9782042ef93bc9430d2a0259526296b6ada293e
SHA256: 60bce0dd107fe72825cf1e656ec51fd6442043f55838dafe01ee7ebf83a6df3e
SHA512: 449a2f0f4c4cbf6a184a6b240f38a247f0b0899f0936c852dab44c30a7bc9e7f0c80f8ba83de94e2fa2f810d0b0b6b62f9d4f7eb666fd80413d89217175d6aac
Description: Small caching DNS proxy and DHCP/TFTP server
 Dnsmasq is a lightweight, easy to configure, DNS forwarder and DHCP
 server. It is designed to provide DNS and optionally, DHCP, to a
 small network. It can serve the names of local machines which are
 not in the global DNS. The DHCP server integrates with the DNS
 server and allows machines with DHCP-allocated addresses
 to appear in the DNS with names configured either in each host or
 in a central configuration file. Dnsmasq supports static and dynamic
 DHCP leases and BOOTP/TFTP for network booting of diskless machines.

Package: dnsmasq-base
Priority: optional
Section: net
Installed-Size: 909
Maintainer: Simon Kelley <simon@thekelleys.org.uk>
Architecture: i386
Source: dnsmasq
Version: 2.77-2.drbl1
Replaces: dnsmasq (<< 2.63-1~)
Depends: adduser, libc6 (>= 2.11), libdbus-1-3 (>= 1.9.14), libgmp10, libhogweed4, libidn11 (>= 1.13), libnetfilter-conntrack3, libnettle6 (>= 3.3), libnfnetlink0
Recommends: dns-root-data
Breaks: dnsmasq (<< 2.63-1~)
Filename: pool/drbl/live-ubuntu-experimental/dnsmasq/dnsmasq-base_2.77-2.drbl1_i386.deb
Size: 432820
MD5sum: 8f5e15eaae823e755fd09d157b5f9b79
SHA1: 4d039aece8e4c9ea07e10d1219e4f88cadcfcd47
SHA256: c0c3a7ad425d00af143b6eca2b90a1ad76dbc585bcfe636b0305f5038ed32c7b
SHA512: bd0edb3d86191fe62539ad2bdd8114fed4fbd76998d32accedfde0cdcda2692768b251553b0ac70952ea8423e8f4aceb157a4ff36f05872740691c676c8da0c7
Description: Small caching DNS proxy and DHCP/TFTP server
 This package contains the dnsmasq executable and documentation, but
 not the infrastructure required to run it as a system daemon. For
 that, install the dnsmasq package.

Package: dnsmasq-utils
Priority: optional
Section: net
Installed-Size: 57
Maintainer: Simon Kelley <simon@thekelleys.org.uk>
Architecture: i386
Source: dnsmasq
Version: 2.77-2.drbl1
Depends: libc6 (>= 2.4)
Conflicts: dnsmasq (<< 2.40)
Filename: pool/drbl/live-ubuntu-experimental/dnsmasq/dnsmasq-utils_2.77-2.drbl1_i386.deb
Size: 24222
MD5sum: e91d55cb0aaa17de7f4a2723a58c8044
SHA1: 7132db9c72a09391e87b78e8d55faa7cc28b1990
SHA256: e9648c47bfcbec5670914f9db5776d6760ac3e1d495ea24c591d9c3b103fc357
SHA512: f05da19dc6f93125d3ebb1ebc4de7bacb13eb31142ad9770b3692464fc1265a44e9402bfbbe3a6a2fd83f279754f40186c77ba8aa9d5ee43ebdd3cc3be2fc350
Description: Utilities for manipulating DHCP leases
 Small utilities to query a DHCP server's lease database and
 remove leases from it. These programs are distributed with dnsmasq
 and may not work correctly with other DHCP servers.

Package: casync
Priority: optional
Section: utils
Installed-Size: 394
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Version: 1+92-1
Depends: libacl1 (>= 2.2.51-8), libc6 (>= 2.17), libcurl3-gnutls (>= 7.16.2), libfuse2 (>= 2.6), liblzma5 (>= 5.1.1alpha+20120614), libselinux1 (>= 1.32), libssl1.0.0 (>= 1.0.0)
Filename: pool/drbl/live-ubuntu-experimental/casync/casync_1+92-1_amd64.deb
Size: 130912
MD5sum: 0ee1e071738b2f5fee8e1de4a9c65ef3
SHA1: bf013c35775bdab5c369bc23f6e451f737dc43f4
SHA256: 6f9c28767fdd2eca74d860d7626429f5afc4967660273f2f666d057bd518d939
SHA512: cb63bd2a8ff68f657a1000cd6317b39bbf4568ada0e279152a7a7eea337ee368ceea6269b05072ac5bda42a7022f848c6741ade76c56b290b8e6c1a374dce046
Description: content addressable data synchronizer
 casync is
 .
 1. A combination of the rsync algorithm and content-addressable storage
 2. An efficient way to store and retrieve multiple related versions of
    large file systems or directory trees
 3. An efficient way to deliver and update OS and container images over
    the Internet
 4. An efficient backup system
 .
 casync uses well-known concepts implemented in a variety of other projects
 (primarily git and rsync), and puts them together in a moderately new, nice
 way.
Homepage: https://github.com/systemd/casync

Package: casync
Priority: optional
Section: utils
Installed-Size: 448
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: i386
Version: 1+92-1
Depends: libacl1 (>= 2.2.51-8), libc6 (>= 2.17), libcurl3-gnutls (>= 7.16.2), libfuse2 (>= 2.6), liblzma5 (>= 5.1.1alpha+20120614), libselinux1 (>= 1.32), libssl1.0.0 (>= 1.0.0)
Filename: pool/drbl/live-ubuntu-experimental/casync/casync_1+92-1_i386.deb
Size: 149696
MD5sum: 268321eec80974a0d009252c68787113
SHA1: 7589280f0125bc88eb973c3879e8573fe395eb9d
SHA256: e037be476d78cc1f38d46b4c6c0a2a5dbb40eb799a76665abbf4fb9138633760
SHA512: 02e5d21d86d682c2bc82cfa33e469dd10b0ccffd9efe1c79ff1ec96b7385a638ca957dd88a3b4a0c986d47f2e29df7ddee29af41222d623e7163192d3a853f6d
Description: content addressable data synchronizer
 casync is
 .
 1. A combination of the rsync algorithm and content-addressable storage
 2. An efficient way to store and retrieve multiple related versions of
    large file systems or directory trees
 3. An efficient way to deliver and update OS and container images over
    the Internet
 4. An efficient backup system
 .
 casync uses well-known concepts implemented in a variety of other projects
 (primarily git and rsync), and puts them together in a moderately new, nice
 way.
Homepage: https://github.com/systemd/casync

